Structural Engineering Commons^™

Ultimate Limit State Reliability-Based Approach Life Prediction Of An Existing Frame Structure Under Seismic Hazard In Indonesia, Wira Herucakra, Luh Putri Adnyani

Journal of Materials Exploration and Findings

Life assessment integrated with Structural Integrity Management (SIM) has been implemented in the oil and gas industry for the past decade to maintain the integrity and safety of an in-service structure used to support hydrocarbon exploration, production, and processing activity. Current structural life assessment, as ruled by the American Petroleum Institute (API), uses a fatigue-based approach for offshore structures subjected to wave loading. As the general principle of SIM is not limited to offshore structures, this study offers an alternative life assessment method for onshore structures, especially steel frame structures subjected to earthquake loads. Reliability analysis, combined with the effect …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Reliability Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The reliability of reinforced concrete bridge columns strengthened with externally bonded, steel-fiber reinforced polymer fabric subjected to blast loads was investigated. Columns were modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. Different concrete strengths, longitudinal reinforcement ratios, and gravity and blast load levels were considered, while uncertainties in material strength and stiffness parameters, as well as load characteristics, were incorporated in the probabilistic analysis. It was found that the use of SFRP can allow significant increases in blast load while maintaining the same level of column reliability.

Reliability Analysis Of Concrete Gravity Dams Under Earthquake Loads, Anu Abraham

LSU Master's Theses

Dams are infrastructure assets of extreme importance; the failure of which can have catastrophic consequences on adjacent communities. Therefore, it is prudent for authorities to evaluate the safety of existing dams in seismically active regions. This thesis focuses on carrying out a reliability analysis of concrete gravity dams under earthquake loads using an enhanced finite element model. For many years, reliability studies on concrete gravity dams were performed using a finite element model that considered a massless foundation and assumed that water is incompressible. Moreover, the design ground motion was applied without any modification either at the bottom fixed boundary …

Proposed New Military Live Load For Highway Bridges In The United States, Walter P. Parker

LSU New Orleans Theses and Dissertations

This thesis presents the results of a mathematical analysis of various live load combinations on highway bridge spans up to 304.8 meters (1,000 feet) total lengths. The analysis included continuous beams, but only the results for simple beams is presented. The analysis was performed using an independently developed Microsoft EXCEL spreadsheet computation, based on superposition and classical mechanics.

In this thesis, several actual bridge live loadings and several hypothetical live loadings were analyzed and compared to the American Association of State Highway and Transportation Officials Load and Resistance Factor Design method. Also considered was the new bridge design method adopted …

Effect Of Moment Gradient And Load Height With Respect To Centroid On The Reliability Of Wide Flange Steel Beams Subject To Elastic Lateral Torsional Buckling, Christopher D. Eamon, Alexander W. Lamb, Kapil Patki

Civil and Environmental Engineering Faculty Research Publications

The reliability of doubly-symmetric wide flange steel beams designed to the AISC Specification for Structural Steel Buildings subjected to elastic lateral torsional buckling was evaluated when considering variation in moment gradient and load height. The analysis considers continuous loads on spans subjected to various end moments with supports that are torsionally fixed and laterally supported, without additional intermediate restraints. Dead load, occupancy live load, and beam resistance random variables were considered. Beam lateral torsional buckling resistance was evaluated from numerical solution of a fundamental differential equation that accounts for the effect of moment gradient and load height. In some cases, …

Condition Factor Calibration For Load And Resistance Factor Rating Of Steel Girder Bridges, Pranav M. Shakya

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Load and Resistance Factor Rating (LRFR) is a reliability-based rating procedure complementary to the Load and Resistance Factor Design (LRFD). The intent of LRFR is to provide consistent reliability for all bridges regardless of in-situ condition. The primary difference between design and rating is the uncertain severity and location of deterioration, including the potential future loss of strength for an element already evidencing deterioration. Ostensibly, these uncertainties are accounted for by applying an additional strength reduction factor: the condition factor, ϕ_c. Currently, condition factors are nominally correlated to the condition of the member, which can be Good, …

Risk-Based Assessment And Strengthening Of Electric Power Systems Subjected To Natural Hazards, Abdullahi Salman

Dissertations, Master's Theses and Master's Reports

Modern economic and social activities are dependent on a complex network of infrastructure systems that are highly interdependent. Electric power systems form the backbone of such complex network as most civil infrastructure systems cannot function properly without reliable power supply. Electric power systems are vulnerable to extensive damage due to natural hazards, as evident in recent hazard events. Hurricanes, earthquakes, floods, tornados and other natural hazards have caused billions of dollars in direct losses due to damage to power systems and indirect losses due to power outages, as well as social disruption. There is, therefore, a need for a comprehensive …

Load Path Uncertainty In A Wood Structure And The Effect On Structural Reliability, Wenqi Wang, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The roof truss bearing points of a light-framed wood house were instrumented with load cells. It was found that under dead load alone, symmetric and theoretically identical truss reactions have significant variation. A similar degree of reaction discrepancy was found under the application of uplift pressures caused by hurricane winds. Analysis revealed that the majority of this discrepancy is caused by inherent uncertainties in load path. Although uncertainties in load magnitude and material resistance are accounted for in design by use of appropriate load and resistance factors, load path is generally taken to be deterministic. In this study, load path …

Reliability Analysis Of Shallow Foundations Bearing Capacity On Sand, Ali Alhajami

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Bearing capacity of shallow foundation is one of the most challenging problems for engineers. The difficulty comes from multiple sources of variability and uncertainty. There is an uncertainty in live load. Soil properties including: unit weight, cohesion, and angle of friction represent sources of variability in the determining bearing capacity. The current theories used in practice only estimate bearing capacity and does not give an exact value for it because of these sources of variability. Currently, there are Terzaghi, Meyerhof, Vesic, and Hansen theories for dealing with this problem. Based on previous research Terzaghi theory was found to be the …

Structural Reliability Analysis Of Corroded Steel Girder Bridge, Mohammed Shaalan Al Badran

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The natural aging, environmental impact, and appropriate design are certainly playing a serious role in safety of the bridges function. The functional safety of bridge constitutes a prime element of the transportation system serving commuters, passengers and freight. According to Federal Highway Administration, the steel bridges share represents a large amount of the United States’ bridges. In last century, the collapse of both the Silver Bridge at Point Pleasant, West Virginia over the Ohio River on December 15, 1967 and over the Mianus River Bridge in Connecticut on June 28, 1983 showed that steel corrosion has been the leading reason …

Reliability-Based Design Optimization Of Concrete Flexural Members Reinforced With Ductile Frp Bars, Bashar Behnam, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

In recent years, ductile hybrid FRP (DHFRP) bars have been developed for use as tensile reinforcement. However, initial material costs regain high, and it is difficult to simultaneously meet strength, stiffness, ductility, and reliability demands. In this study, a reliability-based design optimization (RBDO) is conducted to determine minimum cost DHFRP bar configurations while enforcing essential constraints. Applications for bridge decks and building beams are considered, with 2, 3, and 4-material bars. It was found that optimal bar configuration has little variation for the different applications, and that overall optimized bar cost decreased as the number of bar materials increased.

Dynamic Vulnerability Assessment Of Highway And Railway Bridges, Mehdi Mohseni

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Dynamic loads can cause severe damage to bridges, and lead to malfunction of transportation networks. A comprehensive understanding of the nature of the dynamic loads and the structural response of bridges can prevent undesired failures while keeping the cost-safety balance. Dissimilar to the static behavior, the dynamic response of bridges depends on several structural parameters such as material properties, damping and mode shapes. Furthermore, dynamic load characteristics can significantly change the structural response. In most cases, complexity and involvement of numerous parameters require the designer to investigate the bridge response via a massive numerical study.

This dissertation targets three main …

Improved Reliability Determination When Testing Cold-Formed Steel Components, V. M. Zeinoddini, B. W. Schafer

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The objectives of this paper are to (a) determine the sensitivity of the reliability calculations in Chapter F of the AISI Specification (AISI-S100-07) to controlling load combinations and loading ratios, and (b) develop a more robust alternative for the use of Chapter F. To complete this study the bias factors and variances for all loading conditions are established. In addition, a range of practical load ratios is agreed upon. Parametric studies are performed to explore load case and load ratio dependency for use in the determination of the resistance factor, Φ; specifically, the pre-factor term CΦ and the load variance …

Wim Based Live Load Model For Bridge Reliability, Marek Kozikowski

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Development of a valid live load model is essential for assessment of serviceability and safety of highway bridges. The current HL-93 load model is based on the Ontario truck measurements performed in 1975. Since that time truck loads have changed significantly. Therefore, the goal of this study is to analyze 2005-2007 Weigh-In-Motion (WIM) data and develop a new statistical live load model.

The analyzed WIM data includes 47,000,000 records obtained from different states. A special program was developed to calculate the maximum live load effect. Comparison of the old and new truck data showed that on average Ontario trucks are …

Reliability Of Concrete Masonry Unit Walls Subjected To Explosive Loads, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

This study discuses the development of a procedure that can be used to assess the reliability of concrete masonry unit infill walls subjected to personnel-delivered blast loads. Consideration is given to maintain reasonable computational effort for both the structural analysis and reliability models. Blast load and wall resistance models are developed based on experimental and analytical data, and resistance is evaluated with a large strain, large displacement transient dynamic finite element analysis. A sensitivity analysis is conducted to identify significant random variables and a reliability analysis conducted with a feasible level of computational effort. Reliability indices are estimated for two …