Structural Engineering Commons^™

Comparative Evaluation Of Conventional And Sustainable Concrete Protective Coatings: Performance, Economic, And Environmental, Andro Ebrahim

Theses and Dissertations

Concrete structures are highly susceptible to deterioration from environmental, chemical, and mechanical factors, making protective coatings essential for ensuring durability and reducing maintenance demands. This study aims to compare and evaluate conventional and innovative coating systems for concrete protection across three dimensions—technical performance, environmental sustainability, and life cycle cost efficiency—and to assess whether coatings often regarded or marketed as sustainable genuinely achieve sustainability across these three pillars. Four representative coatings were selected for assessment: epoxy solvent-based, epoxy solvent-free, acrylic water-based, and cementitious. Technical performance was examined through laboratory testing, expert interviews, and multiple real project cases, providing a comprehensive understanding …

Impact Of Natural Disasters On Construction And Engineering Solutions, Karima Ao Damson

Williams Honors College, Honors Research Projects

This Honors Research Project seeks to research and explain the impact of natural disasters on the construction and reconstruction of infrastructure in countries with the highest risk of natural disasters and compare them to the requirements in the United States in the states most prone to natural disasters. The objectives are to identify the countries most prone to natural disasters, describe the environmental impacts of the natural disasters, describe the impacts on construction and reconstruction requirements, and research whether construction and civil engineering solutions currently applied to the individual countries could be improved or reproduced in other countries exposed to …

Enhancing Health And Safety Practices In Construction Site In Developing Nations Through Technology Advancement In South Western Nigeria, Mubaraq Lawal, Abba Mahmud, Ismail Gbolahan Dere, Thankgod Agbo Owoicho

CSID Journal of Infrastructure Development

The construction sector plays a critical role in urban development and economic growth, yet it continues to face major challenges that threaten worker health and safety. Traditional safety measures are not always sufficient for the complex conditions found on construction sites, which creates a need for technology‑based solutions. This study investigates the relationship between technology adoption and health and safety practices in the construction industry in Lagos, Nigeria. The study identifies the major causes of site accidents, examines the level of technology use on construction sites, and reviews existing literature through both primary and secondary data. Primary data were collected …

Flexural Behavior Of Sustainable Concrete Beams Containing Waste Tire Fibers And Recycled Aggregates, Wael M. Montaser Ass.Prof

Journal of Engineering Research

The increasing accumulation of diverse waste materials poses a significant societal challenge, highlighting the importance of developing methods to reuse such waste effectively. One promising solution involves incorporating recycled coarse aggregate (RCA) obtained from demolished concrete into new concrete mixtures. Additionally, tire-derived fibers (TDF), sourced from recycled tires, present an environmentally friendly substitute for conventional reinforcement materials. The integration of RCA with TDF in reinforced concrete beams offers a sustainable approach to enhancing structural performance. This experimental study investigates the flexural performance of reinforced concrete beams containing recycled coarse aggregate (RCA) and tire-derived fibers (TDF). Four mixes with varying RCA …

Fire Fossils: Biomineral Infrastructures In Untangling Climates, Tanmayee More

Masters Theses

Diatoms drift, sediments sink, wildfires generate their own weather. Lightning strikes can blast sand into glass, and microscopic organisms do the same in the cold recesses of the ocean. What alchemies and metabolisms catalyze space, time, and energy? What are the thermodynamics of infrastructure in Climate Change?

Places, materials, and beings are afterimages. Through alchemical experiments, and multi-scalar imaging, I develop simulations of wildfires, and their profound, reverberating effects. In this thesis, a glass-meets-landscape experimental process enters these obscured conditions and renders new material relations for the built environment.

Hickory Street Square Revitalization, Spencer Knight, Grace Dungan, Tim Kula, Evan Lauritsen, Lindsey Mennenga

Honors Program: Senior Projects (Public)

The Hickory Street Square Revitalization Project seeks to transform a central public space in Sidney, Nebraska into a dynamic, community-oriented area that supports local events, economic activity, and cultural heritage. The project addresses six core objectives: 1) convertible street design, 2) parking lot reconfiguration, 3) public amenities, 4) event flexibility, 5) lighting and signage, and 6) old electric plant renovation. A conceptual design was developed by the design team (S.T.E.E.L. Sentinel Solutions) by synthesizing the most effective features of three preliminary alternatives, shaped further through community feedback and evolving project constraints. The final project design minimizes disruption to existing activity …

Seismic Resilience Of Timber Homes, Melia R. Costa

College of Engineering Summer Undergraduate Research Program

The vast majority of residential buildings in California are wood-frame structures. A home is typically a very large investment for families, and damage to the home can be detrimental to a family’s economic success. Thus, reducing the economic impacts of an earthquake on residential timber housing is crucial. A full scale, two-story section of a residential timber house is in construction in the Parson’s Geotechnical and Earthquake Engineering Laboratory on the Cal Poly campus in San Luis Obispo, California. Once built it will be put through earthquake simulation tests on a shake table with various magnitudes of seismic activity. Next, …

Reliability Of Using Secondary And Tertiary Treated Wastewater In Concrete Mixing And Curing, Amany G. Micheal Prof., Haidy Abd El Salam

Architectural Engineering

Water scarcity is a problem that faces many regions. In a developing and arid countries, the need for fresh water is exponentially increasing. One of the most water consuming industries is the construction industry, especially in concrete manufacturing. This research is an evaluation of the Reliability of recycled wastewater to be used in concrete manufacturing. Two different wastewater treatment regimens are implemented: secondary and tertiary treated wastewater. The treated wastewater, either secondary or tertiary, replaces potable water with percentages of 25%, 50%, and 100%. The mixture of the two types of water is used in concrete mixing and curing. Control …

Demystifying Utility Coordination: Understanding The Basics, Josshe I. Palm

Purdue Road School

This session will explain utility coordination to non-utility coordinators. It will help educate others about the role and responsibilities of a utility coordinator, an OSA, easy UC and design mistakes to avoid, scope and design considerations, items commonly overlooked, when to coordinate SUE, and how to work with your UC to request a letting adjustment. We will also highlight UC submittals and allow time for questions about the UC’s role in a project’s success.

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Augmenting External Surface Pressures’ Predictions On Isolated Low-Rise Buildings Using Cfd Simulations, Md Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

The aim of this paper is to enhance the accuracy of predicting time-averaged external surface pressures on low-rise buildings by utilizing Computational Fluid Dynamics (CFD) simulations. To achieve this, benchmark studies of the Silsoe cube and the Texas Tech University (TTU) experimental building are employed for comparison with simulation results. The paper is structured into three main sections. In the initial part, an appropriate domain size is selected based on the precision of mean pressure coefficients on the windward face of the cube, utilizing Reynolds Averaged Navier-Stokes (RANS) turbulence models. Subsequently, recommendations regarding the optimal computational domain size for an …

Recent Developments In Timber Design & Its Impact On Carbon Emissions, Raquel Jackson

Spectra Undergraduate Research Journal

This paper explores recent developments in timber building designs and its potential towards reducing carbon emissions. Carbon dioxide emissions are a growing issue worldwide as urbanization and industrialization continues to increase. The rising concentration of carbon dioxide emissions pose significant concerns towards public welfare and environmental health. Despite current methods to reduce greenhouse gasses, carbon emissions remain difficult to reduce from steel and concrete industries. Increasing timber use in building design is a possible solution. Increasing more timber in building design can help reduce carbon emissions due to the carbon-absorbing properties of the construction material. Timber as a construction material …

The Feasibility Of Using High Strength Stainless Steel In Pre-Stressing Applications, Rana Khaled Morsy

Theses and Dissertations

This paper evaluates the applicability of using a corrosion-resistant reinforcement high strength stainless steel strands (HSSS) Duplex 2205 in pre-stressing applications. HSSS-Duplex 2205 is a high performance steel which can be used as an alternative to the conventional carbon steel strands, for a better service life. The high strength and corrosion resistance of the material allows it to show its impressive performance in marine structural applications. Although the use of HSSS-Duplex 2205 could be initially costly; however, the improved durability and extended service life of the concrete structures using HSSS would require less life-cycle cost. Although there is a gap …

Multi-Physics Numerical Simulation Of Corrosion And Service Life Evaluation Of Novel Reinforced Concrete Systems, Jin Fan

Dissertations

Durability challenges of reinforced concrete materials can shorten the service life and increase the carbon footprint of civil infrastructure systems. Novel alternative materials, such as high-performance fiber reinforced cementitious composites (HPFRCCs) and recycled aggregate concrete (RAC), offer an alternative to tradi-tional concrete materials by increasing the service life of infrastructure or reducing raw material consumption, thereby reducing the life-cycle carbon footprint. Due, in part, to a lack of robust numerical tools, predicting the durability response of these emerging cementitious materials has been insufficiently addressed. A time-dependent multi-physics modeling framework is proposed and adopted to investigate the chloride induced deterioration mechanisms …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Program: Senior Projects (Public)

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Additive Manufacturing Of Engineered Cementitious Composites With Ultra-High Tensile Ductility, Amir Bakhshi

Civil Engineering ETDs

One of the critical factors in the development of additive manufacturing in the construction industry is designing suitable materials for 3D printing applications. 3D concrete printing (3DCP) has gained significant attention due to the abundance and availability of concrete. However, concrete is a brittle material and, without proper reinforcement, cannot meet the requirements for structural purposes. Engineered Cementitious Composites (ECC), known for high ductility, and strain-hardening with low fiber contents, can potentially eliminate the need for steel reinforcement in 3D printing without any need for manual placement of reinforcement. A set of systematic tests on ECC mix designs' fresh and …

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Design, Concept, And Visualization Of Urban Multi-Level Growing Table Systems In Hyper Urban Areas, Aaryan Manoj Nair, Shaheed Mohammed, Omar Rahama

Publications and Research

As of a 2019 study conducted by the National Urban Gardening Program (National Urban Gardening Program), urban farming accounts for approximately 19% of the total national farming output and is expected to triple to almost 45% by 2025. There is intensive research being conducted on aspects of reduced recidivism, communal health benefits, natural carbon capture systems, improved urban ecology and the necessity for reducing the carbon footprint of food, (informally dubbed “food miles”) there is little substantive research on optimisation, and maximation of crop productivity in hyper-urban areas.

The purpose of this report is to understand the functionalities of urban …

Reduction Of Embodied Carbon In Buildings Through Use Of Low Carbon Strategies And Standardization And Enforcement Of Life Cycle Assessment, Bhargavi Sai Sudhakar

Master's Projects and Capstones

The building and construction industry is energy intensive and as of 2021, this industry is responsible for 37% of the total global greenhouse gas emissions. In previous studies of conventional buildings, the operational energy of a building contributed to 80% and the embodied energy contributed to 20% of the total life cycle energy. With increase in policies and standards that focus on reducing the operational energy, low energy and certified green buildings have emerged where the operational energy has considerably reduced. The relative and absolute share of embodied energy in these energy efficient buildings have increased due to excessive use …

Investigation Of Mechanical Properties Of Recycled Fiber-Reinforced Polymer Composites Reinforcing Cement, Caleb Mull, Fnu Archie, Harry Lee, Guyuan Zhang

Discovery Undergraduate Interdisciplinary Research Internship

The usage of fiber-reinforced polymer composites in various fields has increased significantly due to their advantageous physical and mechanical properties. However, the sustainability of composite parts has not been fully solved for a long time. Most end-of-life (EOL) composite parts have been landfilled without recycling due to the recycling cost and lack of application of recycled composites. Mechanical composite recycling that shred the EOL composite part and reuse it for downgraded applications is one of the most commonly used recycling processes for the EOL composite part. In this research, mechanical composite recycling process was demonstrated for the construction application. The …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Port Infrastructure Resilience Through Combined Wind-Surge Demand Characterization, Kaley Callaway

Graduate Theses and Dissertations

The United States economy is reliant on maritime transportation for 70% of imports and exports. Structures that are integral to the operation of ports, such as cranes, are jeopardized when tropical storms approach land. While wind is the only environmental load used to design dockside container cranes, storm surge often accompanies severe wind events and can create large structural loads. This study focuses on determining coupled storm-surge demands and the effect of waves on dockside container cranes. A damage index prediction tool that considers both maximum wind speed and storm surge height is developed and applied to historical hurricane data …

North 14th Street Corridor Improvements Project, Ashley Nguyen, Samantha Corey, Maricela Paramo Reyes, Pooja Rajeev

Honors Program: Senior Projects (Public)

The following project report was a study of the North 14^th Street corridor ranging from Adams Street to Virginia Street conducted by University of Nebraska-Lincoln students for a senior design capstone project. Main focuses of the project were the intersection of Adams and 14^th Street and the 14^th Street bridges over Cornhusker Highway and Oak Creek. Study of this area included work in transportation, traffic, structural, geotechnical, water resources, and environmental engineering. However, this report done by students should not take the place of work done by licensed professional engineers.

This project was done in collaboration with …

Mrda-Mgfsnet: Network Based On A Multi-Rate Dilated Attention Mechanism And Multi-Granularity Feature Sharer For Image-Based Butterflies Fine-Grained Classification, Maopeng Li, Guoxiong Zhou, Weiwei Cai, Jiayong Li, Mingxuan Li, Mingfang He, Yahui Hu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Aiming at solving the problems of high background complexity of some butterfly images and the difficulty in identifying them caused by their small inter-class variance, we propose a new fine-grained butterfly classification architecture, called Network based on Multi-rate Dilated Attention Mechanism and Multi-granularity Feature Sharer (MRDA-MGFSNet). First, in this network, in order to effectively identify similar patterns between butterflies and suppress the information that is similar to the butterfly's features in the background but is invalid, a Multi-rate Dilated Attention Mechanism (MRDA) with a symmetrical structure which assigns different weights to channel and spatial features is designed. Second, fusing the …

Properties Of Concrete Containing Crushed Limestone As Total Replacement Of Natural Sand And Recycled Engine Oil, Mohammad El Bast M. El Bast, Jamal Khatib, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

The rapid growth in the construction industry at the global level has made concrete the most widely used construction material throughout the world. Accordingly, the consumption of natural sand which is one the main raw material constituent of concrete is continuously growing. The demand for river sand is highly increasing due to its scarcity in the market. Manufactured sand produced by crushed rock is being considered as an appropriate alternative to replace river sand in concrete. In recent years, there is a growing interest in the use of crushed sand obtained from limestone quarries in some countries where river sand …