Structural Engineering Commons^™

Expected Structural Damage, Residual Capacity, And Repairability Of Light-Frame Timber Houses, Mikayla Caruthers

Master's Theses

Earthquake damage in light-frame timber structures is commonly evaluated using peak inter-story drift. However, drift alone does not fully represent the remaining structural capacity of a building or its ability to be repaired following a seismic event. Although expected structural damage, residual capacity, and repairability have each been studied extensively, these concepts are often considered independently, leaving limited guidance that links them within a unified post-earthquake assessment methodology.

This thesis establishes an integrated framework that relates expected structural damage, residual capacity, and repairability for light-frame timber residential structures. Existing literature was synthesized to develop drift-based damage-state classifications, identify methods for …

A Workflow For Automating Geospatial And Data Visualizations For Post-Earthquake Building Damage Data, Alejandra Bravo

Architectural Engineering: Graduate Reports

After major seismic events, reconnaissance efforts of various types are made to gather data. Coarse data can be collected with satellite imagery, mid-scale data can be recorded by capturing thousands of images, and granular data is typically documented manually by humans. Post-earthquake reconnaissance teams can be deployed by universities, research organizations, professional associations, and private firms. Academics, engineers, and students with varying degrees of expertise are tasked with collecting building metadata and damage data, typically in a short period of time. This data can be of various types including numerical (i.e. number of stories, height, etc.), categorical (i.e. damage level, …

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Reinforced Concrete Design Fundamentals, Belen Stephanie Martinez Espinoza, Estevan Jacob Perez

Architectural Engineering

Hispanic workers make up a large and growing portion of the construction workforce in the United States; particularly in California, the percentage of construction workers who are Hispanic is estimated to be about 55% as of 2021 (Elkins). Many of these workers are Spanish-speaking, yet there is still a gap between technical engineering design and what is understood and applied in the field. One major reason for this gap is the lack of clear bilingual resources. To bridge the gap, a 48-page bilingual booklet titled Reinforced Concrete Design Fundamentals (Fundamentos del Diseño de Concreto Reforzado in Spanish) was created. This …

Design And Construction Of Caed Support Shop Steel Fence On Existing Cmu Wall, Jared Gustavo Martinez, Agustin Dominguez Jimenez

Architectural Engineering

This project involved the design, testing, fabrication, and construction of a new steel fence system for the CAED support shop at California Polytechnic State University, San Luis Obispo. The fence was designed to attach to an existing CMU wall and serve as a future attachment point for a removable shade canopy system. Experimental testing was performed on multiple turnbuckles to establish a conservative design load for the structural design of the fence posts, baseplates, welds, and anchorage connections. In addition to meeting structural requirements, the project incorporated architectural elements inspired by the original fence and surrounding CAED shop environment. The …

Tanzania Mbesese Initiative 2026, June Ezzell, Sam Liebman, Noah Beyer, Kate Hamilton, Luke Vollert, Kylee Borgen, Cody Balazs, Meg Mclaughlin

Architectural Engineering

The Tanzania Mbesese Initiative 2026 Senior Project supports a multi-year design-build effort to establish the Same Polytechnic College in Same, Tanzania. This community faces high poverty levels and limited access to higher education, necessitating sustainable infrastructure to support tertiary education. To prepare for the upcoming July phase of construction, an eight-student Architectural Engineering team designed three practical and resilient structures: a Shade Structure, a Water Collection Structure, and a Reusable Scaffolding system. The final design applied structural analysis, modeling, and hand-tool fabrication practice to balance material efficiency with long-term structural durability. The deliverables provide comprehensive construction documentation, complete material takeoffs, …

Design And Implementation Of A Honeycomb Damping System For The 2026 Eeri Seismic Design Competition, Vera Nguyen, Lauryn Wojcik

Architectural Engineering

The authors of this report were a part of the 2026 Earthquake Engineering Research Institute (EERI) chapter at California Polytechnic State University, San Luis Obispo. In July 2026, they will travel to Portland, Oregon with 12 students to compete in the Undergraduate Seismic Design Competition hosted by EERI. The competition required teams to develop a comprehensive structural design proposal that included computer-based modeling and analysis, construction of three physical models, and the preparation of both a technical poster and oral presentation for a proposed high-rise building located in Portland, Oregon. Cal Poly’s “Illahee Tower” was designed with an emphasis on …

Contribution Of Slotted Web To The Cyclic Behavior Of Bare And Composite Beam-To-Hss Column Connections, Pablo Ulargui Ramos

Master's Theses

Slotted web connections produce consistent and meaningful improvements in the cyclic behavior of bare and composite beam-to-HSS column connections. Across the eight connections investigated in this thesis, the introduction of a slotted web increased rotational capacity by approximately 7% to 37% and increased cumulative energy dissipation at the strength-degradation limit by approximately 37% to 81%. These improvements were accompanied by only a small reduction in ultimate flexural resistance on the order of 3% to 8%, attributable to the loss of web cross-section at the slot and, for the more flexible H/t = 16 columns, to increased out-of-plane deformation of the …

Exploring The Role Of Video Games In Civil Engineering Education And K-12 Stem Engagement, Jillian S. Codron

Architectural Engineering

Civil engineering education has traditionally emphasized a linear progression from theory to application, with foundational concepts introduced in lecture before being reinforced through laboratory or design experiences. While effective for advanced learners, this approach can limit early engagement for K–12 students who may struggle to connect abstract principles to realworld engineering practice. This project examines the use of video games as interactive, feedback-driven environments for introducing civil engineering concepts and practices to younger learners in more exploratory and accessible ways.

The study pursues four primary objectives: evaluating the educational affordances of selected video games; examining how gaming experiences have influenced …

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas

Architectural Engineering

This document will describe the inputs, methodology, and outputs for the CLT 2-way subroutine for cases with and without openings recently added to a proprietary structural analysis software. For the sake of simplicity, most of the discussion will be focused on cases without openings from here on out, as the verification process for a novel method for cases with openings is still in progress. The CLT 2-way module calculates multi-point resistance functions for panels without openings by automating the procedure outlined in an industry-standard structural design manual. The subroutine also finds the appropriate dynamic response factors, kinetic load multipliers, mass, …

Caed Shop Entrance Wall Redesign, Ellen Elizabeth Untalan, Joelle Schalesky, Katherine Evalyn Timbes

Architectural Engineering: Graduate Reports

This project involved the replacement and redesign of the north wall at the CAED Support Shop at Cal Poly, San Luis Obispo. The redesign aligned the wall with the adjacent Engineering West building. The original concrete wall was designed with jagged recesses to accommodate large trash bins. These recesses no longer serve their intended function due to the permanent relocation of these bins. The replacement CMU low lift grouted wall optimizes courtyard space, enhances aesthetic cohesion, and maintains architectural features consistent with the existing structure. The following report outlines the process necessary to complete this project, including the permitting process, …

Statistical Time-History Response Of Mid-Story Isolated Structures In Linearized Elastic Conditions, Min Thit Khant

Master's Theses

This study presents a statistical analysis of the seismic demand of mid-story isolated structures in linearized elastic conditions. The assumed earthquake database consists of 228 ground motions recorded in California from earthquakes with magnitudes greater than 6. A three-degree-of-freedom modeling approach is adopted, and the seismic demands of the substructure, superstructure, and isolation system are determined for varying isolated mass and stiffness ratios. The seismic demand of mid-story isolated structures at the isolation level is expressed in terms of the response of an idealized isolated superstructure supposed to be on the ground, while the demands on the substructure and superstructure …

Experimental Characterization And Finite Element Analysis Of The Effects Of Pitting Corrosion On The Mechanical Properties Of Stainless Steel, Duncan Jay Fure, Long Wang

Master's Theses

Many structures do not fail from poor design, but instead from environmental degradation. Corrosion is one mode whose effects can be diminished, but not eliminated, by employing corrosion resistant materials, such as 304 stainless steel, which are still subject to pitting corrosion. Pitting corrosion is a chemical process of the localized removal of material leaving cavities. Despite the prevalence of pitting corrosion, there has been limited testing conducted of the effect of stress during corrosion. This study conducted accelerated controlled corrosion experiments with and without mechanical loading and various corrosion times. Pit morphology of different conditions was analyzed with statistical …

Evaluation Of Damages And Economic Losses In Light-Frame Timber Houses, Mason P. Leonard

Master's Theses

This thesis aims to evaluate the damages and economic losses in light-frame timber houses by designing and constructing a two-story, full-scale, fully equipped, code conforming timber assembly. Specifically, the structure will be analyzed based on how the non-structural components (NSC) like gypsum wallboard, interior doors, windows, and sliding patio doors as well as structural components like light-frame timber shear walls impact the economic losses.

Damage limit states were obtained from the Federal Emergency Management Agency (FEMA) P-58, Performance Assessment of Buildings to extract at what inter-story drift (ISD) ratio each damage limit state was expected to occur at. Fragility and …

Tettoia Iperbolica, Lydia Chou, Jack L. Walsh, William Jasper Mors, Simarjot S. Gandhoke, Ian F. Da Silva, Jamie L. Zimmerman

Architectural Engineering

Tettoia Iperbolica (Hyperbolic Canopy) is a multidisciplinary senior project created to revitalize an underutilized outdoor space next to the Architectural Engineering Building 21 at Cal Poly. The project responds to needs identified by faculty and staff, including limited gathering space, inadequate shading for the adjacent conference room, poor drainage, and a lack of ADA accessibility. Building on two previous senior project efforts, the 2025 team advanced the concept into a fully designed, structurally stamped, permitted redwood canopy supported by existing concrete columns and one new steel column.

The work included extensive site investigation to verify subsurface conditions, concrete strength testing, …

The Xenaform, Cassadie J. Golding

Architectural Engineering

The XenaForm explores how complex, expressive structures can emerge from simple, low-tech construction methods using principles of parametric design and structural geometry. By combining folded plate techniques with modular tetrahedral components, the project bridges high-tech digital modeling and hands-on physical fabrication. The result is a lightweight, buildable system that reclaims the engineer’s role as a form-finder.

Architectural Engineering Institute: International Student Design Competition 2025, Alexandra Marie Kersting, Alec Thomas Gibbs, Haley Francesca Sousa, Kline Genevieve Nickel

Architectural Engineering

The AEI International Student Design Competition is an annual competition held by the Architectural Engineering Institute that aims to replicate an integrated building design process. The 2025 Cal Poly team consisted of 4 Architectural Engineering students, each competing in the Structural and Integration disciplines. The team was provided a set of architectural drawings and a 3D architectural Revit model of Carson Headquarters in Omaha, Nebraska. The team was tasked with the creation of a complete structural design as well as a discussion of integration of other building design disciplines.

Prefabricated Timber Living: A Modular Sustainable Solution, Hannah Giang, Justin Huang

Architectural Engineering

This senior project is part of the Gateway Decathlon, a two-year, multidisciplinary design-build competition focused on innovative, sustainable housing solutions. Our team designed and constructed a one-story dwelling using cross-laminated timber (CLT) panels to promote low-carbon, industrialized building practices. The structure features a modular layout with sloped roofs and exposed timber interiors, combining environmental responsibility with architectural flexibility. Emphasizing prefabrication and off-site construction, the design supports efficient assembly and disassembly, reduced material waste, and minimal environmental impact. The result is a scalable, adaptable housing prototype aligned with the competition’s goals of creativity, sustainability, and innovation in residential construction.

Development Of Planetary Drive System For Formula Sae Electric Race Car, Brian Wong, Bradley Maruoka, Joshua Charles Fine, Madison Kai

Mechanical Engineering

Hub motors are compact electric motors mounted directly on each outboard wheel hub. Utilized in Formula SAE and Formula Student vehicles, this configuration offers several advantages over traditional drivetrains, including packaging optimization within the chassis, vehicle traction, and improved efficiency. Although hub motors are not yet common in 4WD vehicles, they are being explored for use in EVs and may become more common in the future. Every year, Cal Poly Racing FSAE designs and builds a formula-style race car. To improve drivetrain performance, the team is investigating the achievability of a hub motor 4WD drivetrain, requiring extensive research, development, and …

Increasing Drift Capacity Of Non-Ductile Concrete Shear Walls Through Confinement With Fiber-Reinforced Polymer Application, Andrew Duong, Sophia Maglabe, Sheyna Rongong

Architectural Engineering: Graduate Reports

The seismic response and laboratory testing of pre-1980s reinforced concrete (RC) shear walls commonly exhibit undesirable concrete crushing and rebar buckling in the wall end-zones leading to a flexural compressive failure. The lack of ductility of these walls is attributed to low reinforcement ratios and absence of special boundary elements (SBE) as required by modern design code. Thus, the authors are proposing a fiber reinforced polymer (FRP) retrofit method to provide confinement to the end-zones of pre-1980s walls equivalent to that of an SBE. Current industry applications of FRP have largely been for shear strengthening of RC beams, columns, and …

Analyzing Tms 402 -22 : Design Of Special Reinforced Masonry Shear Walls, Tristan D. Aranda

Architectural Engineering

This experiment examines possible inconsistencies in the TMS 402-22 masonry code between Section 7.3.2.5 and Section 9.3.5.6.2, regarding the requirements for special boundary elements in Special Reinforced Masonry Shear Walls. By investigating the two sections, it can be determined whether the two sections are in accordance with each other regarding aspect ratio. Tensile forces and strains are calculated respectively for each wall and block type and are compared to the respective tensile yield forces and ductile strains. This determines which respective boundary elements go past yield and become ductile. Based on this determination, recommendations can be made to the …

Seismic Resilience Of Timber Homes, Melia R. Costa

College of Engineering Summer Undergraduate Research Program

The vast majority of residential buildings in California are wood-frame structures. A home is typically a very large investment for families, and damage to the home can be detrimental to a family’s economic success. Thus, reducing the economic impacts of an earthquake on residential timber housing is crucial. A full scale, two-story section of a residential timber house is in construction in the Parson’s Geotechnical and Earthquake Engineering Laboratory on the Cal Poly campus in San Luis Obispo, California. Once built it will be put through earthquake simulation tests on a shake table with various magnitudes of seismic activity. Next, …

Engineering-Enhanced Theatre: How Engineering Involvement Can Aid Regional Theatres, Albert M. Le

Architectural Engineering

Engineering and theatre are disciplines not often associated with each other within regional and small theatre companies in the United States. The distinction between the two fields of study is not simply from the fundamental differences between how each field is taught and practiced, but also the difficulties encountered within a scope of theatre often constrained with limited budget and time for each production. However, when beginning to explore the intersection between engineering and theatre, it is found that the empirical nature of current theatrical practices can be countered, and scenic design and construction can be re-envisioned with engineering involvement …

Innovations To Increase Plywood Shear Wall Design Capacity And Resiliency, "Mega Walls", Through Ductile Metal Strapping, Trevor Douglas Reichenberg, Tara Suzanne Reich, Katelyn Marie Lowry

Architectural Engineering

The researchers of this project are three undergraduate Architectural Engineering students at California Polytechnic State University, San Luis Obispo. Plywood shear walls are common structural elements in timber structures that resist lateral forces. Since their introduction to the industry in the 1950s, their shear capacities have remained essentially unchanged amongst the innovations of other wooden lateral systems. Prior to this project, Cal Poly undergraduate researchers have taken on the challenge of modernizing the shear wall. The “MeGa Wall” project was born: a system that implements metal gauge strapping which enhances a conventional wall by reducing nail connection failures. Full-scale experimental …

Structural Health Monitoring In A Small-Scale Environment Using Wired And Wireless Communication Device Readings, Gabriela Mcclure

Architectural Engineering

Our goal with this project is to test and develop a structural health monitoring (SHM) device capable of assessing the safety and integrity of building connections and overall structural health. At Cal Poly, a large portion of our structural engineering curriculum focuses on the design of buildings in response to earthquakes and the damage that can be mitigated through proper design. The increasing accessibility of technology in our world allows for the growth and development of systems that can enhance building safety and help us better understand how building practices can evolve to continue prioritizing life safety. Structural health monitoring …

Cardboard Concrete Column Formwork, Danny Shrestha, Joelle Schalesky

Architectural Engineering

This project is an exploration of cardboard as a potential material for construction formwork for concrete columns. Multiple material tests were conducted to explore the behavior of cardboard and concrete. Multiple specimens of cardboard were tested for modulus of elasticity, moment of inertia, and tensile strength. Concrete was tested for its apparent lateral fluid pressure under vibration. Cardboard formwork was then designed and constructed based on these tested behaviors. The final design of the formwork consisted of folding cardboard sheets lined with hardboard, supported by wood studs, and tied by plastic banding straps.

Ultimately, two concrete columns―8' and 10' in …

Moment Monument, Brayden Alec Martinez, Carsten Walker Huber, Gaspar Emmanuel Solorio, Jared Thomas Schieferle

Architectural Engineering

We designed our project, dubbed the Moment Monument, in part to live out our dream of applying engineering and design skills towards creating a lasting impression on Cal Poly’s campus, as well as to develop a visual aid for future engineering students in steel design classes. The Moment Monument is in the Experimental Structures Laboratory, which is a space in the university’s ‘Poly Canyon’ that is reserved for students to build and test different applications of architecture, structural engineering, and construction. In recent years, it has been diffi cult to receive approval to build in the canyon due to high …

Testing Of Recycled Polypropylene As A Viable Structural Material (Quarter 2), Isabella Jimenez-Melendrez, Katherine Timbes, Jocelyn Embleton, Tauni Dela Cruz, Zyra Kingston, Emily Byrd, Jacob Stinger

Architectural Engineering

5.25 trillion plastic particles have been found in the oceans each year, 3 million water bottles are consumed each hour, and one million plastic bags are used each minute in the United States of America (Williams). The vast majority of conventional plastics such as polyethylene, polypropylene, polystyrene, and more, are non-biodegradable (Tokiwa). To make matters worse, 70% of this non-biodegradable plastic is discarded into landfills and inevitably makes its way into the environment (Williams,). Plastic products have become vital to the United States economy due to their many uses in the construction, packaging, transportation, and health care industries. However, this …

Implementation Of Fluid Viscous Damper For 2023 Eeri Seismic Design Competition, Dalton J. Muck, Payton S. Mcgee, Payton R. Filippin, Tynan Castro

Architectural Engineering

The authors of this report were a part of the 2023 Earthquake Engineering Research Institute (EERI) student chapter for California Polytechnic State University, San Luis Obispo (Cal Poly). With thirteen other team members, they traveled to San Francisco, CA to compete in the Seismic Design Competition (SDC) hosted by EERI. The team was tasked with preparing a written proposal, design and computer analysis of the structural system, construction of two physical models, as well as creation of a poster and a presentation for a proposed mid-rise building located in the competition host city. The goal of the design of Cal …