Structural Engineering Commons^™

Effect Of Edge-Stiffening And Diaphragms On The Reliability Of Bridge Girders, Christopher D. Eamon, Andrzej S. Nowak

Civil and Environmental Engineering Faculty Research Publications

Secondary elements such as barriers, sidewalks, and diaphragms may affect the distribution of live load to bridge girders. The objective of this study is to evaluate their effect on girder reliability if these elements are designed to be sufficiently attached to the bridge so as not to detach under traffic live loads. Simple span, two lane structures are considered, with composite steel girders supporting a reinforced concrete deck. Several representative structures are selected, with various configurations of barriers, sidewalks and diaphragms. Bridge analysis is performed using a finite element procedure. Load and resistance parameters are treated as random variables. Random …

Cold-Formed Steel Gable End Wall Design Using The Prescriptive Method For One And Two Family Dwellings, Benjamin W. Downey, Sutton F. Stephens, Roger A. Laboube

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Ccfss Technical Bulletin Spring 2005, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Ccfss News Spring 2005, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Newsletters (1999 - 2008)

No abstract provided.

Supplement 2004 To The North American Specification For The Design Of Cold-Formed Steel Structural Members 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by a joint effort of the American Iron and Steel Institute Committee on Specifications, the Canadian Standards Association Technical Committee on Cold Formed Steel Structural Members (S136), and Camara Nacional de la Industria del Hierro y del Acero (CANACERO) in Mexico. The organizations and the Committees have made a diligent effort to present accurate, reliable, and useful information on cold-formed steel design. The Committees acknowledge and are grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included …

Supplement 2004 To The North American Specification For The Design Of Cold-Formed Steel Structural Members, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by a joint effort of the American Iron and Steel Institute Committee on Specifications, the Canadian Standards Association Technical Committee on Cold Formed Steel Structural Members (S136), and Camara Nacional de la Industria del Hierro y del Acero (CANACERO) in Mexico. The organizations and the Committees have made a diligent effort to present accurate, reliable, and useful information on cold-formed steel design. The Committees acknowledge and are grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included …

Distortional Buckling Of Cold-Formed Steel Members In Bending, Cheng Yu, Benjamin W. Schafer

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Laterally braced cold-formed steel beams generally fail due to local and/or distortional buckling in combination with yielding. For many cold-formed steel (CFS) studs, joists, purlins, or girts, distortional buckling may be the predominant buckling mode. However, distortional buckling of CFS beams remains a largely unaddressed problem in the current North American Specification for the Design of Cold-Formed Steel Structural Members (NAS). Further, adequate experimental data on unrestricted distortional buckling in bending is unavailable. Therefore, two series of bending tests on industry standard CFS C and Z-sections were performed and presented in this dissertation. The testing setup was carefully designed in …

Secondary Reinforcement For Fiber Reinforced Polymers Reinforced Concrete Panels, Reid Stephens Jr.

Opportunities for Undergraduate Research Experience Program (OURE)

No abstract provided.

Fuel Injection System For One Cylinder Motor Cycle Engine, Bambang Sugiarto

Makara Journal of Technology

Fuel Injection System for One Cylinder Motor Cycle Engine. Fuel injection has been developed for many years. But its common application is limited on car’s engine. With many reason fuel injection systems in motorcycle one cylinder engine has not been widely used yet. Fuel Injection System allows the amount of fuel, injected to be controlled appropriate to engine parameters such as engine speed, amount of air inducted to cylinder, temperature, for each cycle, over the entire engine operating conditions. This fuel injection research is done to find out the Volumetric Efficiency of the intake manifold system, the amount of fuel …

Influence Of Connection Placement To The Behavior Of Precast Concrete Exterior Beam-Column Joint, Elly Tjahjono, Heru Purnomo

Makara Journal of Technology

Influence of Connection Placement to the Behavior of Precast Concrete Exterior Beam-Column Joint. This paper presents an experimental study on the influence of connection placement to the behaviour of exterior beamcolumn joint of precast concrete structure under semi cyclic loading. Four half-scale beam-column specimens were investigated. Three beam-columns were jointed through connection that are placed in beam-column joint region and the forth is connected at the plastic hinge potensial region of the beam. Crack patterns, strength, stiffness and ductility of the test specimens have been evaluated. The test result indicated that all beam-column specimens show good ductility behavior.

Optic Properties On Aggase2 Polycristal Fabrication, A. Harsono Soepardjo, I Dewa Made Janusetiawan

Makara Journal of Technology

Optic Properties on AgGaSe2 Polycristal Fabrication. Polycristal AgGaSe2, is compound (I-III-VI2) a semiconductor as basic material for thin film for solar cell. Polycristal was succesfully grown using Bridgmann Method, heated on sequential temperature treatment until 850°C and cooled down slowly until room temperature. Results observed were in the form of ingot (bars) with more or less 3 cm length and 13 mm in diameter. By using X-Ray Fefraction, composition obtained of each element (weight %) was Ag = 29,3996 %, Ga = 36,8123 % and Se = 30,29 % while using X-Ray Difraction lattice parameter obtained/calculated a = 4,4112 Å, …

Modelling And Simulation Of Packed Bed Catalytic Converter For Oxidation Of Soot In Diesel Powered Vehicles Flue Gas, Mohammad Nasikin, Praswasti P.D.K. Wulan, Vita Andrianty

Makara Journal of Technology

Modelling and Simulation of Packed Bed Catalytic Converter for Oxidation of Soot in Diesel Powered Vehicles Flue Gas. Diesel vehicle is used in Indonesia in very big number. This vehicle exhausts pollutants especially diesel soot that can be reduces by using a catalytic converter to convert the soot to CO2. To obtain the optimal dimension of catalytic converter it is needed a model that can represent the profile of soot weight, temperature and pressure along the catalytic converter. In this study, a model is developed for packed bed catalytic converter in an adiabatic condition based on a kinetic study that …

The Effects Of Influent Debit On Hydrodynamic Characteristic Of Bojongsoang Facultative Pond: Without Wind Effects, Rositayanti Hadisoebroto, Suprihanto Notodarmojo

Makara Journal of Technology

The Effects of Influent Debit on Hydrodynamic Characteristic of Bojongsoang Facultative Pond: Without Wind Effects. The performance of facultative pond in Bojongsoang WWTP have reported to be unstable. One of the cause of the unstable performance is the hydrodynamic characteristics that not met the criterion. The improper hydrodynamic characteristics are included the existence of dead-zone, the short-circuiting, and the turbulence due to eddy current. The study was to analyze the effect of the influent debit variation on the hydrodynamic characteristics of the pond using mathematical model. The two-dimensional hydrodynamic model was built from two hydrodynamic equations which are continuity and …

2004 Supplement To The Standard For Cold-Formed Steel Framing – Prescriptive Method For One And Two Family Dwellings, 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Aisi Standard For Cold-Formed Steel Framing – General Provisions, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary. With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Aisi Standard For Cold-Formed Steel Framing – Wall Stud Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary. With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Standard For Cold-Formed Steel Framing – General Provisions, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

2004 Supplement To The Standard For Cold-Formed Steel Framing Prescriptive - Method For One And Two Family Dwellings, 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Commentary On The Standard For Cold-Formed Steel Framing Prescriptive Method For One And Two Family Dwellings, 2001 Edition With 2004 Supplement, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is anticipated that AISI will publish updates of …

Standard For Cold-Formed Steel Framing -- Prescriptive Method For One And Two Family Dwellings, 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is anticipated that AISI will publish updates of …

Standard For Cold-Formed Steel Framing – Wall Stud Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

An Assessment Of In-Situ Frp Shear And Flexural Strengthening Of Reinforced Concrete Joists, Annaiah Raghu, John J. Myers, Antonio Nanni

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study examines the in-situ shear performance and modes of failure of reinforced concrete (RC) T-beams (joists) strengthened with externally bonded carbon fiber reinforced polymer (CFRP) sheets. the experimental program consisted of testing a series of nine structural components at the Malcom Bliss Hospital, in St. Louis, Missouri. the members were tested to validate the different systems and techniques of strengthening. in particular, this paper covers cases of U-Wraps with and without end-anchors. the experimental results clearly indicate the contribution of externally bonded CFRP sheets in increasing the shear capacity of the system. the experimental and theoretical shear strength of …

Field Evaluation Of Unreinforced Masonry Walls Strengthened With Frp Composites Subjected To Out-Of-Plane Loading, Gustavo Tumialan, Davide Tinazzi, John J. Myers, Antonio Nanni

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Unreinforced masonry (URM) walls at a decommissioned building in St. Louis, Missouri were tested to failure. the walls belonging to the present experimental program were subjected to out-of-plane loading. Previous work on URM and reinforced masonry walls strengthened with FRP laminates has shown remarkable increases in capacity and ductility. However, most of this research has been conducted under laboratory conditions, where, many times, it is a difficult task to represent real field conditions. in this context, this experimental program offered a singular opportunity for performing field experimentation on URM walls strengthened with Glass, Aramid and Carbon Fiber Reinforced Polymers (GFRP, …

Web Crippling Of Cold Formed Steel Multi -Web Deck Sections Subjected To End One-Flange Loading, J. A. Wallace, R. M. Schuster

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Presented in this paper are the results of a study where the web crippling capacity of multi-web deck sections subjected to End One-Flange loading (EOF) was investigated. A total of 148 tests were completed. New coefficients were established using the data from this study and any appropriate data from previous work. New resistance factors and factors of safety were also established. Also investigated in this study was the web crippling capacity of partially fastened deck sections and re-entrant deck type sections subjected to EOF loading. Seventy-seven (77) partially fastened multi-web decks and 36 re-entrant decks were tested in this study. …

Behavior Of Complex Hat Shapes Used As Truss Chord Members, Nuthaporn Nuttayasakul, W. Samuel Easterling

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Cold-formed steel roof truss systems that use complex hat shape members for both top and bottom chord elements are a growing trend in the North America steel framing industry. When designing cold-formed steel sections, a structural engineer typically tries to improve the local buckling behavior of the coldformed steel elements. The complex hat shape has proven to limit the negative influence of local buckling. However, a distortional buckling mode can be the control mode of failure in the design for the chord member with an intermediate un-braced length. The chord member may be subjected to both bending and compressive load …

Channel Section Beams Under Static And Impact Loading, J. Rhodes, M. Macdonald

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The elasto-plastic behaviour of plain channel section beams under central point loading is investigated under static and impact loading conditions. Two different loading set-ups are considered, the first in which the load is applied to cause compression at the flange free edges and the second in which the load is applied to cause tension at the flange free edges. For each of these load set-ups static loading tests, single impact loading tests and multiple impact loading tests are carried out on a total of 86 channel beams. The energy absorption behaviour of the beams tested is examined and the static …

Cold-Formed Steel Examples To The Theory And Finite Element Implementation Of Plasticity, Herm Hofmeyer

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper presents two examples to the theory and finite element implementation of plasticity. The first example is on the cross-sectional behavior of trapezoidal sheeting subjected to a concentrated load. It is shown that the number of elements (and thus the number of integration points) along the comer radius are important for the correct modeling of this static problem. The second example is on the failure of first-generation sheeting subjected to a concentrated load and a bending moment. This problem, especially for large span lengths, can be solved only with explicit dynamic simulations. These are, for our research field, for …

Tests Of Storage Rack Channel Columns With Rear Flanges, Nabil Abdel-Rahman, Ashraf Fadel, Mohamed Ei-Sadaawy, Sherif Mourad

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

An experimental study was performed to investigate the ultimate strength and modes of failure of axially loaded channel rack columns with rear flanges. A total of 16 column specimens fabricated by press-brake forming method were tested up to failure. The material properties of the column specimens were determined using standard tensile coupon tests. The deformation and stress behavior of the tested columns were monitored using displacement transducers and strain gauges. The effects of column slenderness ratio, thickness, perforation, and end conditions on the column ultimate strength and mode of failure were studied. The test failure loads were compared to the …

Initial Geometrical Imperfections In Three-Storey Modular Steel Scaffolds, W. K. Yu, K. F. Chung, S. L. Chan

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Modular steel scaffolds are commonly used as supporting scaffolds in building construction. They are highly susceptible to global and local instability, and traditionally, the load carrying capacities of these scaffolds are obtained from limited full-scale tests with little rational design. Structural failure of these scaffolds occurs from time to time due to inadequate design, poor installation and over-loads on sites. Initial geometrical imperfections are considered to be very important to the structural behaviour of multi-storey modular steel scaffolds. This paper presents an extensive numerical investigation on three different approaches in analyzing and designing multi-story modular steel scaffolds, namely, a) Notional …

Introduction To The Theory And Finite Element Implementation Of (Steel) Plasticity, Herm Hofmeyer

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper tries to enlighten the subject of (numerical) plasticity by presenting fundamental theory and some very practical examples. For a two-dimensional plain stress state, a Hubert-Henky yield criterion is derived. The flow rule is discussed, including an explanatory numerical example. The yield criteria and flow rule are theoretically applied in a four node finite element. This element is used to show some of the conditions and limitations of a plastic calculation in the finite element method. Finally, a real finite element calculation is made for illustrating the theory derived.