Chemical Engineering Commons^™

Effect Of Eggshell Powder And Nano-Hydroxyapatite On The Surface Roughness And Microhardness Of Bleached Enamel, Shahinaz Hassan, Lamiaa Moharam

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: The aim of the study was to evaluate the remineralizing potential of prepared solutions of eggshell powder (ESP) and nano-hydroxyapatite (nHA) on the surface roughness and microhardness of bleached enamel. Materials and Methods: Fifty bovine anterior teeth were selected and cleaned then bleached using a chemically activated in-office bleaching agent then the teeth were randomly allocated into five groups (n = 10) according to the tested remineralizing agents (10% ESP solution, 10% nHA solution, and MI Paste Plus) into; control, bleached, bleached + ESP solution, bleached + nHA solution, and bleached + MI Paste Plus groups. Then, the teeth …

Novel Design And Synthesis Of Noble Metal Cluster Decorated Ironoxyfluoride Nanorods For Applications In Lithium-Ion Batteries And Water Splitting Catalysis, Dilann Yasin

Wayne State University Theses

Lithium-ion batteries have emerged as the preferred rechargeable energy storage system for vehicles and small electronics in order to help combat the environmental issues of our time. LIBs play an increasingly important role in the electrification of internal combustion engine vehicles. The performances of existing LIBs have plateaued after decades of research and development. In addition, cost and abundance of the most common battery materials, Lithium, Nickel and Cobalt, have become an issue in the world of energy storage systems. Therefore, in order to meet the increasing demand for safe and cheap energy storage, next‐generation batteries with dramatically improved electrochemical …

Bioinspired Redox Active Pyrogallol For Aqueous Ion Separations, Matt Libby

Honors Theses and Capstones

No abstract provided.

Constructing A Fine Dispersion And Chemical Interface Based On An Electrostatic Self-Assembly And Aqueous Phase Compound In Go/Sio2/Sbr Composites To Achieve High-Wear Resistance In Eco-Friendly Green Tires, Rui Zhang, Jiaye Li, Stephen Jerrams, Shui Hu, Shipeng Wen, Ligun Zhang

Articles

The hazard to the ecosystem caused by rubber microparticles generated from tire abrasion has been a constant concern. Therefore, to protect this ecosystem, the development of a tire tread with high abrasion resistance is especially significant. Herein, γ-aminopropyltriethoxysilane (APTES) was used to modify graphene oxide (GO) and silica (SiO2) to obtain GO and SiO2 with positive charges (NG and NS). Furthermore, NG and NS were electrostatically self-assembled by using maleic anhydride (MAH) hydrolysis, thereby obtaining composite particles (NG-NS) with “bridged structures”. Also, the NG-NS/styrene butadiene rubber (SBR) compounds possessing fine dispersion of NG-NS were prepared by the aqueous compounding method. …

Surface Modification Of Carbonyl Iron Particles Using Dopamine And Silane Coupling Agent For High-Performance Magnetorheological Elastomers, Jiaqing Zhao, Dongliang Li, Baojie Sun, Liang Jiang, Yanfen Zhou, Shipeng Wen, Stephen Jerrams, Jianwei Ma, Shaojuan Chen

Articles

Magnetorheological elastomers (MREs) are smart materials whose mechanical properties can quickly respond to changes in the external magnetic field. This phenomenon is known as the magnetorheological (MR) effect and is the key to the application of magnetorheological elastomers. Previous studies have found that the interface between magnetic particles and elastomers is a critical factor that influencing the MR effect of MREs. To improve the interfacial interaction between silicone rubber (SR) and carbonyl iron (CI) particles, in the MREs considered in this work, CI particles were subjected to surface modification through polydopamine (PDA) deposition and n-dodecyltrimethoxysilane (DTMS) grafting. X-ray photoelectron spectroscopy …

Distillery, Clare Nicholas, Patrick Hanlon

Williams Honors College, Honors Research Projects

The goal for this project is to make a cost effective still. We will be implementing cost saving parts to create a cheap but effective still. From initial research conducted, we will try to combine a stainless steel still and copper still together so that the cheaper material (stainless steel) and the component that removes sulfur compounds (copper) are both implemented. The ME side of the project will focus on the actual design and construction of the parts that will be implemented into the still. Included in the design process will be calculations of heat transfer for the current and …

Development Of A Vascularized Osteogenic Implant Using Fused Glycosaminoglycan-Chitosan Microcapsules, Charles Michael Gabrion

Wayne State University Theses

Osteoarthritis remains a poorly treatable outcome of traumatic cartilage injury as cartilage is unable to self-repair. Unfortunately, roughly 10% of all adults in the United States have been diagnosed with osteoarthritis although the true fraction is likely at least 30%. While the main focus of osteoarthritis research has been on treating damage to the cartilage, osteoarthritis will also lead to damage to the adjacent trabecular bone due to wear via shearing down of the tissue’s surface. Considering this, in conjuncture with transplanted cartilages’ inability to integrate into the native tissue, unlike the surrounding bone, the significance of a combined osteochondral …

Preparation, Cure, And Characterization Of Cyanate Ester-Epoxy Blends Containing Reactive Flame Retardants, Mustafa Mukhtar, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

Cyanate ester resins are sometimes mixed with lower cost epoxy monomers to modify cost, toughness, and processing capabilities. Despite the high performance of these thermosetting polymers, flame retardancy remains an issue. This study examined blends of three different commercial cyanate ester monomers (LVT-100, LECy, and XU-71787.02) and diglycidyl ether of bisphenol A (DGEBA) at 50/50 wt% of each type. The blends were successfully reacted with two reactive flame retardants (FR): 9,10-dihydro-9-ox-9-phosphaphenanthrene-10-oxide (DOPO) and poly(m-phenylene methylphosphonate) (PMP) at phosphorus contents ranging from 0 to 3 wt%. The curing behavior of EP/CE blends was investigated using differential scanning calorimetry (DSC). It was …

Techno-Economic Analysis And Intensification Of Biosurfactant Production From Palm Fatty Acid For Oil Recovery Enhancement, Chanapol Charoentanaworakun

Chulalongkorn University Theses and Dissertations (Chula ETD)

Currently, Biosurfactants are receiving the interest as a substitute for surfactants synthesized from petroleum products due to their biodegradability. Palm oil derivatives are one of the interesting candidates of biosurfactant production because of the superior properties of hydrocarbon structure in the range of C16-C18. Thus, this research studied the economic and environmental impact analysis of production processes, and adsorption and oil recovery performance for different anionic biosurfactants synthesized from palm oil derivatives, i.e. palm fatty acid distillate (PFAD). Moreover, the optimal design and essential operating condition of batch reactive distillation column were also studied to intensify the equilibrium limitation of …

Shape Memory Polymer Based On Copolybenzoxazines: Effects Of Chain Length Of Aliphatic Monoamines On Shape Memory Performance, Attachai Sriwattana

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research was successful in completely synthesizing benzoxazine copolymers for shape memory polymers (SMPs) by mixing bisphenol A-aniline (BA-a) and bisphenol A-aliphatic monoamines of various chain lengths (BA-aMAs). Our studies have shown that shorter chain lengths will provide higher crosslinking densities, which play an important role in promoting the stiffness of the polymer, resulting in a higher shape-fixity ratio (Rf). While longer chains result in a lower crosslinking density and a larger free volume, thus promoting a higher shape-recovery ratio (Rr), Therefore, selecting the appropriate aliphatic monoamine chain length is crucial. From the study of this work, it was found …

Sustainable Toughening Of Polylactic Acid With Ultra-Fine Fully Vulcanized Powdered Natural Rubber, Reza Gholami

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study investigated the sustainable toughening of polylactic acid (PLA) by incorporating ultra-fine fully vulcanized powdered natural rubber graft-copolymerized with poly-styrene-co-acrylonitrile (UFPNR-SAN). We investigated the effect of the styrene-to-acrylonitrile ratio (ST:AN) used during the grafting process on the final UFPNR-SAN compatibility with PLA. The ST:AN ratio was systematically varied during the grafting reaction to prepare UFPNR-SAN with a range of different surface energies. The ST:AN ratio of 4:1 resulted in higher compatibility of UFPNR-SAN with the PLA matrix among other ratios. This could be explained by the desirable interfacial interactions and better dispersion shown by the contact angle measurements and …

Green Synthesis For Silver Nanoparticle /Natural Rubber/ Nanocellulose Bio-Polymeric Composites, Puttakhun Meemai

Chulalongkorn University Theses and Dissertations (Chula ETD)

A green synthesis method was developed to produce biobased semiconducting composites of silver nanoparticles (AgNPs), skim natural rubber (SNR), and bacteria cellulose. A solution of silver nitrate (AgNO3) ranging from 40 to 160 mM was added to skim natural rubber latex (SNRL) to facilitate the reduction of silver ions to AgNPs at temperatures between 50 and 80 °C. Subsequently, BC pellicle was immersed in the prepared AgNPs-SNRL suspension for 48 hours, followed by washing and drying. The resulting AgNPs/SNR/BC films were then analyzed for their chemical, mechanical, antibacterial, and electrical properties. The strain at break of the films was significantly …

Methyl Isobutyrate Production Via Hydrogenation Of Methyl Methacrylate Derived From Pyrolysis Of Acrylic Plastic Waste, Ramzi Nasser Ahmed Saif

Chulalongkorn University Theses and Dissertations (Chula ETD)

According to zero waste and upcycling policy, this work aims to utilize waste polymethyl methacrylate (PMMA) to methyl isobutyrate (MIB) via hydrogenation over nickel (Ni) based catalysts supported on commercial zeolites: HY, H-Beta-27 (SiO2/Al2O3 = 27 by mole), H-Beta-40 (SiO2/Al2O3 = 40 by mole) and H-ZSM-5. The appropriate catalyst support was first screen by using MMA monomer as the substrate for hydrogenation. Under 30 bar initial H2 pressure (PH2) at 250 °C for 3 h, Ni/H-Beta-27 catalyst effectively promoted hydrogenation to achieve 85% MMA conversion with 56.2 wt% MIB yield because of its larger external surface area and pore size. …

Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions, Tao Song, Mohamed Ahdaya, Zhanmiao Zhai, Thomas P. Schuman, Baojun Bai

Chemistry Faculty Research & Creative Works

As one of the most widely used technology to ameliorate the reservoir's heterogeneity, polymer gels have been applied for more than 60 years. However, how to plug fractured reservoirs with significant abnormal features, high temperature and high salinity, especially the divalent cations, is still a challenging target. This work systematically evaluated a novel salt-resistant re-crosslinkable preformed particle gel (SR-RPPG) designed for fractured reservoirs with excellent salt resistance (up to 5 % CaCl₂). We evaluated the swelling kinetics, thermal stability and plugging efficiency of this SR-RPPG. We assessed the swelling kinetic and re-crosslinking behavior of the SR-RPPG through the …

Effects Of Confinement On Ionic Liquids And Deep Eutectic Solvents For The Design Of Catalytic Systems, Electrochemical Devices, And Separations, Andrew Drake

Theses and Dissertations--Chemical and Materials Engineering

Confinement of ionic liquids (ILs) and deep eutectic solvents (DESs) within mesoporous materials such as silica helps to control the local environment within the pores for applications such as catalysis, electrochemistry, and absorption. Silica thin films with 2.5 and 8 nm pores and micron-sized silica particles with pore diameters of 5.4 and 9 nm were synthesized to study the effect of nanoconfinement on ILs 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]), and DESs reline and ethaline (choline chloride and urea or ethylene glycol). Silica thin films with vertically aligned, well ordered, and accessible pores were synthesized via the evaporation-induced …

Attrition Study Of Copper-Supplemented Iron-Based Oxygen Carrier For Chemical Looping Combustion, Neng Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Chemical looping combustion (CLC) is a promising technology that can mitigate the carbon emissions for power generation. The cost of oxygen carriers (OCs) impedes the scale up of CLC. Compared to synthetic iron-based OCs, red mud (RM), an abundant iron-based solid waste from industry, is a cost-effective choice due to its intrinsic inclusion of both inert and catalytic phases that are crucial for CLC. It was anticipated that the addition of copper oxide to RM using a mechanical mixing method that can be easily scaled up would enhance both reactivity and oxygen transport capacity (OTC), and the heat of reaction …

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Microalgae Immobilization With Filamentous Fungi: Process Development For Sustainable Food Systems, Suvro Talukdar

Theses and Dissertations--Biosystems and Agricultural Engineering

Demand for sustainable food sources has increased because of the rapid growth of the world's population.  In this study, microalgae cells of Haematococcus pluvialis were immobilized using the edible fungal strain Aspergillus awamori for potential food applications. The study investigated the impact of fungal loading, pellet geometry, and initial microalgae cell concentration on the immobilization performance and product characteristics. It was found that higher fungal loading and larger fungal pellets contributed to increased immobilization performance while increased initial microalgae concentration inhibited the process. Larger fungal pellets had decreased biomass density, which led to decreased surface concentration of immobilized microalgae but …

Phosphorus Release And Recovery From Simulated Ferric Wastewater Sludge, Aseel Alnimer

Theses and Dissertations (Comprehensive)

Phosphorus (P) is a fundamental element necessary for all life forms and a key component in the fertilizer industry. Meanwhile, the excessive load of P to water bodies due to human activities has the potential to promote eutrophication. Wastewater treatment plants remove P either biologically or chemically and produce P rich sludge which could be a potential renewable source for P. At present, commercial technologies exist for P recovery from biological wastewater sludge. However, P recovery from chemical sludge particularly iron(III)-phosphate (Fe-P) sludge generated in chemical P removal plants that use iron(III) salts remains a challenge.

This study explored, in …

Investigation Of Mechanical Regulation On Stat3 Activity And Mmp Production, Jaxson R. Libby

Honors Theses and Capstones

Transcription factor, STAT3, is inappropriately expressed in cancer cells, and has contrasting activation in 2D versus 3D microenvironments. 2D plates are often used for drug screening and do not always recapitulate in vivo responses. To combat inaccurate 2D drug studies, a 3D hydrogel was created to support the growth of cancer cells into a tumor-like environment. The hydrogel consists of a biocompatible dextran homopolysaccharide, cell adhesion RGD sequences, and crosslinker MMP labile peptides. A pH dependent reaction couples the RGD sequences to dextran then the polymers are crosslinked into a gel. Crosslinking is accomplished using terminal cysteine peptide sequences, allowing …

Analyzing Spatio-Temporal Mechanisms Of Land Subsidence In The Parowan Valley, Utah, Usa, Jiawei Li, Ryan G. Smith, Katherine R. Grote

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Parowan Valley, Utah (USA), is an agricultural region experiencing rapid subsidence due to extensive groundwater extraction from aquifers with a significant portion of fine-grained sediments. To analyze the subsidence spatio-temporally, time-series Interferometric Synthetic Aperture Radar (InSAR) of 155 Sentinel-1 C-band scenes were processed. These data showed approximately 30 cm of ground subsidence in Parowan Valley from 2014 to 2020. Because of the high temporal sampling rate of the Sentinel-1 satellite (12-day cycle), it is possible to determine the seasonal changes of ground deformation and relate this to groundwater extraction. To better understand the relationship between ground deformation and groundwater extraction …

Electrical Resistivity Tomography Revealing Possible Breaching Mechanism Of A Late Pleistocene Long-Lasted Gigantic Rockslide Dam In Diexi, China, Lanxin Dai, Xuanmei Fan, Dan Wang, Fanyu Zhang, Ali P. Yunus, Srikrishnan Siva Subramanian, J. David Rogers, Hans Balder Havenith

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Landslide damming is a widespread phenomenon worldwide and significantly affects the evolution of fluvial landscapes. However, it is rarely witnessed from an antiquities perspective, and the case for observing their internal structure is challenging. We attempt to visualize the subsurface structure and understand the likely breaching mechanism of the late Pleistocene Diexi gigantic landslide dam (longevity of ~ 10 ka), using electrical resistivity tomography (ERT) method. Eight ERT measurements on the Diexi dam body revealed high resistivity zones near the periphery and lower resistivity zones in the middle portion of the profiles. Geomorphological mapping based on the LiDAR data determined …

Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants could react with adsorbates on carbonate rock surface to alter wettability from oil-wetness to water-wetness, which is effective to enhance oil recovery. Surfactant huff-puff treatment is mostly applied for this purpose and the resulting surfactant performance is the outcome of complex interfacial processes. Currently, the effect of important parameters on surfactant performance is not completely reported and the contribution of each parameter to surfactant performance is hard to be quantified. Traditional methods to optimize surfactant performance are time-consuming and show strong dependency on extensive experiments. in this paper, we address these problems from machine learning (ML) perspectives. Several ML …

Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The effects of various material compositions and reservoir environments on the ultimate strength and swelling kinetics of a commercial preformed particle gel (PPG) have been investigated. This study used different ratios of acrylamide and acrylic acid copolymers with a specific crosslinker concentration. Results have indicated that increasing the acrylic acid proportion enhances the PPGs' ability to swell but weakens their network structure. In contrast, increasing the crosslinker content decreases the swelling ratio and increases the gel strength. The highest equilibrium swelling capacity among the six preformed particle gel samples was obtained for PPG2, which has the highest acrylic acid amount …

Running Shoe Pedometer, Benjamin Kasper

Williams Honors College, Honors Research Projects

Running shoe pedometer aims to solve the issue of worn out running shoes. It can be difficult to know just how many miles you have run in your shoes and when a new pair is needed. Running in old shoes and worn out shoes is heavily linked to injury. My proposed project is a device that is powered by the compressive forces on the shoes soles that counts the number of steps the wearer takes using a microcontroller. Then, when the shoe reaches milestone that indicate it has been used 75% 90% and 100% of its expected life, it will …

Understanding Failure Mechanisms Using Multi-Scale Analyses To Improve The Performance Of Zinc Metal And Lithium-Ion Batteries, Brendan E. Hawkins

Dissertations and Theses

We are beginning a global transition away from the use of fossil fuels for our energy needs toward using renewable energy sources in order to mitigate the effects of climate change. One of the biggest challenges to this transition is that, unlike fossil fuels, renewable energy systems have inherent intermittency and require supporting energy storage systems to enable reliable power distribution and electrified transportation. Rechargeable batteries are an attractive energy storage option because of their high energy efficiency, versatility, modularity, and ease of use. Lithium-ion batteries (LIBs) have dominated the rechargeable battery market for portable electronics for the past two …

Molecular Elucidation Of Reaction Mechanisms In Aluminum & Lithium Metal Batteries By Solid-State Nmr Spectroscopy And Electrochemical Methods, Leo W. Gordon

Dissertations and Theses

As society wrestles with the ever-growing climate consequences of burning fossil fuels, the increased demand for electric vehicles and renewable power generation mandates safe, sustainable, earth-abundant, low cost, and energy dense batteries. Different use cases will necessitate different types of batteries; for example, stationary storage systems prioritize minimal expense, whereas mobile applications like electric vehicles emphasize high energy densities. Aluminum and lithium metal batteries hold great promise for next-generation energy storage due to their large specific capacities (2980 mA h g^-1, and 3860 mA h g^-1, respectively). In particular, aluminum metal is low cost, has high …

Understanding The Kinetics And Mechanisms Of The Desired And Undesired Reactions During Electrochemical Hydrogenation And Hydrogenolysis Of Furfural On Copper In Acidic Media, Andrew S. May

Dissertations and Theses

The decarbonization of the chemical industry would have an immense impact on lowering greenhouse gas emissions and assisting in mitigating global warming. To achieve this there is a growing interest in implementing renewable feedstocks like biomass and coupling of chemical processes with renewable energy. Furfural is a biomass derived species that has been identified as a platform molecule. Electrochemical processes are more easily coupled with renewable electricity and can be used to valorize biomass derived species such as furfural. The installation of electrochemical processes is hindered by a smaller knowledge base compared to thermochemical processes. This dissertation investigates the electrochemical …

Heterogeneous Microstructure And Mechanical Behaviour Of Al-8.3fe-1.3v-1.8si Alloy Produced By Laser Powder Bed Fusion, S. J. Yu, P. Wang, H. C. Li, R. Setchi, M. W. Wu, Z. Y. Liu, Z. W. Chen, S. Waqar, Lai-Chang Zhang

Research outputs 2022 to 2026

The relationship between processing parameters, microstructure, and mechanical properties of Al-8.3Fe-1.3V-1.8Si alloy processed by laser powder bed fusion is seldom studied. Therefore, fully dense alloys with two parameters were selected to investigate this key issue. The results show that the alloy with low power and scanning speed (S200) shows fan-shell-shaped melt pools and laser tracks while another (S350) shows a deeper and wider melt pool. Both alloys obtain a heterogeneous microstructure without a secondary phase in melt pool (MP) and a nano-sized phase in melt pool boundary (MPB). The difference between solid-solution strengthening and Orowan strengthening in MP and MPB …

Role Of Air Staging In A Batch-Type Fixed Bed Biomass Combustor Under Constant Primary Air, Awais Junejo, Yasir M. Al-Abdeli, Jacobo Porteiro

Research outputs 2022 to 2026

Staged combustion of biomass is the most suitable thermo-chemical conversion for achieving lower gaseous emissions and higher fuel conversion rates. In a staged fixed bed combustion of biomass, combustion air is supplied in two stages. In the first stage, primary air is provided below the fuel, whereas in the later stage, secondary air is supplied in the freeboard region. The available literature on the effects of air staging (secondary air location) at a constant primary air flow rate on combustion characteristics in a batch-type fixed bed combustor is limited and hence warrants further investigations. This study resolves the effect of …