Chemical Engineering Commons^™

Design And Development Of A Resonance Ignition System Using Gaseous Propellants, Benjamin J. Hoefer

Master's Theses

This work presents the development and experimental evaluation of a resonance igniter (RI) operating with premixed gaseous propellants. Resonance ignition is a non-electrical ignition concept in which an underexpanded jet impinges on a closed-end Hartmann–Sprenger tube (HST), generating cyclic compression and expansion waves that rapidly heat gas near the tube endwall. A modular experimental system was designed and built to investigate resonance ignition using methane–air and methane–oxygen mixtures. The system includes a supplemental configuration that may probe for mixture conditions favorable to ignition, informing RI testing. Pressure and temperature measurements were used to characterize pressure control, mixture pressure ratio (MPR), …

Hybrid Rans-Les Analysis Of Turbulent Flame Under Near Blow-Off Condition In A Multi-Stage Swirl Combustor, Brandon O'Brien

College of Graduate Studies: Theses & Dissertations

Advances in computational resources are making computational fluid dynamics (CFD) increasingly accessible for a variety of engineering applications. However, certain complex problems, such as simulating detailed flame kinetics, remain computationally prohibitive for many users. Developing cost-effective methods to simulate these challenges would greatly benefit applications involving flame dynamics, such as turbine engines or industrial burners. This study investigates the effect of main stage swirler intensity on near lean blow-off characteristics in a multi-staged swirl combustor using Ansys Fluent. The hybrid RANS-LES turbulence model, Stress Blended Eddy Simulation (SBES) coupled with Flamelet Generated Manifold (FGM) combustion model was selected to model …

Ignis: A One-Dimensional Laminar Flame Code, Jansen P. Berryhill, Jacob K. Spinti, David O. Lignell

Faculty Publications

Laminar flame codes have an important role in combustion modeling. They can provide a fundamental understanding of flame dynamics and provide a basis for building subgrid scale models in turbulent flow simulations. This paper presents Ignis, an open-source laminar flame code with the capability to offload submodels, like soot formation and radiation, using external packages and libraries. Ignis is written in C++, is documented with Doxygen, and is available on GitHub. It contains three different flame formulations: diffusion flames, premixed flames, and laminar flamelets solved in the mixture fraction coordinate. An option to facilitate creation of a diffusion flame table …

Sootlib: A Soot Model Library For Combustion Simulation, Victoria B. Stephens, Joshua Bedwell, Alex J. Josephson, Keturah Oldham, David O. Lignell

Faculty Publications

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and …

Partially Oxidative Torrefaction Of Woody Biomass Pellets: Burning Behaviour And Emission Analysis, Sajid Riaz, Yasir M. Al-Abdeli, Ibukun Oluwoye

Research outputs 2022 to 2026

Non-conventional torrefaction under partially oxidative conditions is an emerging cost-effective thermochemical pre-treatment method to improve the quality of biomass for energy applications. The literature lacks data on the combustion of biomass torrefied under oxygen-deficient atmosphere with actual reactor conditions (inevitable non-uniformities in the thermal environment). In this work, a dual mode fixed-bed biomass (torrefaction) reactor and combustor was operated on Australian biomass pellets, to torrefy the fuels at 275 °C for 30 min using partially oxidative atmosphere (O₂: 5 vol %, balance N₂) and then to combust them. Combustion behaviour with a particular focus on gaseous …

No Formation During Co-Combustion Of Coal With Two Thermally Treated Biomasses, Thomas Allgurén, Klas Andersson, Andrew R. Fry, Eric G. Eddings

Faculty Publications

The combustion behavior of biomass as a fuel varies dependent on source of the raw material, but also on the type of pre-treatment. In this work steam exploded and torrefied woody biomass were studied with respect to NOx formation in co-firing experiments. Most of the reported data is based on small scale experiments and simulations. In this work, however, have three different cases been investigated experimentally in a 1.5MWth combustor supported by reaction simulations. One case corresponds to firing 100% Utah bituminous coal and two cases where 15% of the coal (on a mass basis) has been replaced with either …

Effect Of Process Control Agents Used In Mechanochemical Synthesis On Properties Of The Prepared Composite Reactive Materials, Mehnaz Mursalat

Dissertations

The study explores synthesis and reactivity of new reactive materials prepared by ball milling. High-energy ball milling became a ubiquitous mechano-chemical tool to manufacture diverse powders, from pharmaceuticals or foods to alloys to new solid rocket propellants. It enabled a dramatic expansion of the range of chemical compositions obtainable; however, it did not so far, allowed one to fine-tune morphology or interfaces in the generated powders. It is shown in this work how different process control agents (PCAs) can serve to tune the powder morphology and reactivity. Commonly used as lubricants and cooling agents during milling, liquid PCAs can be …

Investigations Of The Therman Treatment Of Sodium Thiosulfate In Gas Streams For The Removal Of I2, Anjeza Arapi

Dissertations and Theses

The aim of this work was to study the performance of sodium thiosulfate in several systems. Sodium thiosulfate decomposition and SO2 conversion were analyzed using thermogravimetric analysis combined with chromatographic techniques. Thermogravimetric analysis (TGA) measurements determined the decomposition of the acidification reaction of 30% sodium thiosulfate solution in a 14% carbon dioxide (CO2) atmosphere and 1% hydrochloric acid (HCl) solution in the temperature regime of 300 - 750 K. Sodium thiosulfate and sulfur dioxide (SO2) are considered effective methods for removing iodine (I2) from air and flue-gas streams respectively. In acid containing gas-streams where the SO2 content is determined by …

Fluorine-Based Inorganic Oxidizers For Use In Metal-Based Reactive Materials, Siva Kumar Valluri

Dissertations

This work explores inorganic fluorides as oxidizers for fuel-rich reactive materials. A preliminary assessment of metal fluorides accounting for their enthalpy of formation points to bismuth (III) fluoride, BiF3 and cobalt (II) fluoride, CoF2 as oxidizers of interest. Initially, composite powders of aluminum with chosen fluorides at 50-50 wt. % are prepared by arrested reactive milling. Despite an increase in reactivity and lowtemperature ignition, the prepared composite powders are insensitive to initiation by electro-static discharge (ESD), making them attractive alternative to analogous thermites having very high ESD sensitivity. In air, the composite powder particles burn faster than reference aluminum particles …

Improving Boron For Combustion Applications, Kerri-Lee Annique Chintersingh

Dissertations

Boron has received much attention as a potential additive to explosives and propellants due to its high theoretical gravimetric and volumetric heating values. The challenge, however, is that boron particles tend to agglomerate, have lengthy ignition delays and very low combustion rates. Prior research indicates that boron’s long ignition delays are due to its inhibiting naturally occurring oxide layer, impeding the diffusion of reactants for oxidation. For combustion, current studies report that boron particles have two consecutive stages, but the actual reaction mechanism is poorly understood. Despite many years of relevant research, quantitative combustion data on micron-sized boron particles are …

Examination Of Flow Dynamics And Passive Cooling In An Ultra Compact Combustor, Tylor C. Rathsack

Theses and Dissertations

The Ultra Compact Combustor (UCC) promises to greatly reduce the size of a gas turbine engine’s combustor by altering the manner in which fuel is burnt. Differing from the common axial flow combustor, the UCC utilizes a rotating flow, coaxial to the engine’s primary axis, in an outboard circumferential cavity as the primary combustion zone. The present study investigates two key UCC facets required to further this combustor design. The first area of investigation is cooling of the Hybrid Guide Vane (HGV). This UCC specific hardware acts as a combustor center body that alters the exit flow angle and acts …

Characterization And Evaluation Of Cordless Nailer Performance For Liquid And Gaseous Fuels, Mark Carioscio

Master's Theses (2009 -)

The Paslode Cordless XP Framing Nailer is a combustion-powered nail gun that operates using a fuel blend of a propylene and 1-butene. This tool is designed to drive nails using a piston driven by a combustion reaction. The current fuel blend is able to fire approximately 1200 shots per fuel cartridge and match the energy output of pneumatic, corded nailers on the market. This thesis is written with the intent to gain a better understanding of the operation of the tool and how its performance varies when the fuel source is altered. A bizonal combustion model was created to simulate …

Thermochemical Conversion Of Biomass: Detailed Gasification And Near-Burner Co-Firing Measurements, Jacob B. Beutler

Theses and Dissertations

An increasing emphasis on mitigating global climate change (global warming) over the last few decades has created interest in a broad range of sustainable or alternative energy systems to replace fossil fuel combustion. Biomass, when harvested responsibly, is a renewable fuel with many uses in replacing fossil fuels. Cofiring biomass with coal in traditional large-scale coal power plants represents one of the lowest risk, least costly, near-term methods of CO₂ mitigation. Simultaneously, it is one of the most efficient and inexpensive uses of biomass. Alternatively, biomass can be transformed into useful products through gasification to produce clean syngas for …

Thermophotovoltaic Devices: Combustion Chamber Optimization And Modelling To Maximize Fuel Efficiency, Arnold Chris Toppo, Ernesto Marinero, Zhaxylyk Kudyshev

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently, 110 billion cubic meters of natural gas (primarily methane), a potent greenhouse gas, are flared off for environmental and safety reasons. This process results in enough fuel to provide the combined natural gas consumption of Germany and France. The research team developed a thermophotovoltaic device to convert thermal energy to electricity at a high efficiency using proprietary emitters and combustion system. With the current focus being fuel efficiency and the combustion process, the assembly was simulated using ANSYS Fluent modelling software and the following parameters were optimized: air/fuel ratios, flow rates, and inlet sizes. Simultaneously the heat transfer across …

Fundamental Studies Of Solid-Fuel Combustion Using A Two-Stage Flat-Flame Burner, Adewale Ayodeji Adeosun

McKelvey School of Engineering Graduate Student Theses & Dissertations

Innovative coal technologies are essential for addressing concerns about air pollution and global climate change. A key pathway to advancing these technologies is through developing a thorough understanding of the fundamental physical and chemical processes that occur during coal combustion. Ignition influences many aspects of coal combustion, including flame stability, submicron aerosol evolution, and char burnout. As important as ignition and these associated processes are, they are challenging to study because they depend on many factors, such as the combustion environment, particle size, and particle-particle interactions.

While there have been many studies of coal ignition, none have studied the process …

Combustion Of Nanocomposite Thermite Powders, Ian Monk

Dissertations

This work investigates combustion of nanocomposite thermite powders prepared by arrested reactive milling (ARM). The focus is on how ARM as a top-down approach to nano-thermite building generating fully-dense nanocomposite particles with dimensions of 1-100 µm affects the rates and mechanism of their combustion. A variety of thermites are milled using both aluminum and zirconium as fuels combined with several oxidizers (WoO₃, MoO₃, CuO, Fe₂O₃, and Bi₂O₃). The powders are ignited using both an electrostatic discharge (ESD) and a CO₂ laser beam.

A range of parameters vary …

NoX Formation In Light-Hydrocarbon, Premixed Flames, Robert T. Hughes

Theses and Dissertations--Mechanical and Aerospace Engineering

This study explores the reactions and related species of NO_x pollutants in methane flames in order to understand their production and consumption during the combustion process. To do this, several analytical simulations were run to explore the behavior of nitrogen species in the pre-flame, post- flame, and reaction layer regions. The results were then analyzed in order to identify all "steady-state" species in the flame as well as the determine all the unnecessary reactions and species that are not required to meet a defined accuracy. The reductions were then applied and proven to be viable.

Nox Formation In Syngas/Air Combustion, Nazli Asgari

Theses and Dissertations

Syngas is a reliable energy source derived from the gasification of coal and other solid fuels. The feedstock type and the production process of syngas can affect the composition of syngas. Gas turbines utilizing high hydrogen content (HHC) fuels like syngas for power generation applications need to meet stringent pollutant emission standards, particularly with respect to nitrogen oxides (NOx). For gas turbine conditions, reliable experimental data, especially at high-pressure, is necessary for both generating accurate NOx prediction models and improving reaction pathways regarding the NOx chemistry. In this study, NOx formation in post-flame gases of syngas combustion at different conditions …

Studies In Pressurized Oxy-Combustion: Process Development And Control Of Radiative Heat Transfer, Akshay Gopan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Fossil fuels supply over 80% of the world’s primary energy and more than two-thirds of the world’s electricity. Of this, coal alone accounts for over 41% of the electricity supplied globally. Though coal is globally well-distributed and can provide stable and reliable energy on demand, it emits a large amount of carbon dioxide—a greenhouse gas responsible for global warming. Serious concerns over the implication of the increased global temperature have prompted the investigation into low carbon energy alternatives. The idea of capturing the carbon dioxide emitted from the combustion sources is considered as one of the viable alternatives. This would …

Fundamental Studies Of Flame Structure Through Laser Plasma Diagnostics, Wendong Wu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Increasing concerns about air pollution and global climate change are drawing attention to the need for efficiency improvements and emission reductions for combustion processes, which account for more than 85% of energy production in United States. Combustion efficiency and emissions are affected by the mixing and reacting of fuel and oxidizer. Understanding such behavior plays a critical role in flame structure studies and combustion optimization. However, experimentally obtaining mixture fraction, which is a widely used quantity to describe the mixing behavior, has proven to be a challenge, especially for heavier hydrocarbon fuels or fuel rich flames. Moreover, measuring flame temperature …

Sub 2 Nm Particle Characterization In Systems With Aerosol Formation And Growth, Yang Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Aerosol science and technology enable continual advances in material synthesis and atmospheric pollutant control. Among these advances, one important frontier is characterizing the initial stages of particle formation by real time measurement of particles below 2 nm in size. Sub 2 nm particles play important roles by acting as seeds for particle growth, ultimately determining the final properties of the generated particles. Tailoring nanoparticle properties requires a thorough understanding and precise control of the particle formation processes, which in turn requires characterizing nanoparticle formation from the initial stages. The knowledge on particle formation in early stages can also be applied …

Pollutant Formation In Oxy-Coal Combustion, Nujhat Choudhury

Theses and Dissertations

With the increasing levels of carbon dioxide (CO2) in the atmosphere, researchers are driven to seek cleaner combustion techniques to burn coal for power generation. Oxy-coal combustion is a promising technique to cut down CO2 emissions. This technology requires the introduction of a pure oxygen (O2) stream and a recycled flue gas stream into the boiler instead of air. Flue gas stream generated from the system will be low in volume and highly concentrated in CO2. Thus, the capture and sequestration process will be facilitated. But, one of the concerns of adopting this technology is the altered chemistry of pollutants …

Use Of Green Mussel Shell As A Desulfurizer In The Blending Of Low Rank Coal-Biomass Briquette Combustion, Mahidin Mahidin, Asri Gani, M. Reza Hani, Muhammad Syukur, Hamdani Hamdani, Khairil Khairil, Samsul Rizal, Abdul Hadi, T.M.I. Mahlia

Makara Journal of Technology

Calcium oxide-based material is available abundantly and naturally. A potential resource of that material comes from marine mollusk shell such as clams, scallops, mussels, oysters, winkles and nerites. The CaO-based material has exhibited a good performance as the desulfurizer or adsorbent in coal combustion in order to reduce SO2 emission. In this study, pulverized green mussel shell, without calcination, was utilized as the desulfurizer in the briquette produced from a mixture of low rank coal and palm kernel shell (PKS), also known as bio-briquette. The ratio of coal to PKS in the briquette was 90:10 (wt/wt). The influence of green …

Combustion Of Novel Thermite Mixtures For Iodine Generation, Sergio Emanuel Guerrero

Open Access Theses & Dissertations

Halogen-containing reactive materials could be used for mitigating the spread of hazardous, active biological microorganisms aerosolized as a result of explosion. The present work exhibits experimental results on the combustion of mechanically alloyed aluminum-iodine (Al-I2) powder mixed with Fe2O3, CuO, MoO3, Bi2O3, and I2O5. Wet mixing was used to prepare the samples, which were then compacted into pellets and ignited with a CO2 laser. A chamber was designed and built to accommodate for combustion and collection of products, and the available laser ignition setup was modified to enable combustion experiments with rapidly burning gas-generating mixtures. High-speed video recording was used …

Synthesis And Characterization Of Metal-Based Reactive Powders, Yasmine Aly

Dissertations

Aluminum added to propellants, explosives, and pyrotechnics, boosts their energy density. Different approaches were investigated that could shorten aluminum ignition delays, increase combustion rates, and decrease the tendency of aluminum droplets to agglomerate. Here, Al-based reactive, mechanically milled materials are prepared and characterized.

For powders with Fe, Ni, or Zn additives, the particles consist of an aluminum matrix and inclusions of Fe, Ni, or Zn comprising 10 at % of the bulk composition. For additives of Ni and Zn, only short milling times can be used to prepare composites; intermetallic phases form at longer milling times. Thermogravimetric analysis shows selective …

Determining Biomass Particle Properties Via Digital Imaging, Justin Scott, Dr. Larry Baxter

Journal of Undergraduate Research

Understanding the devolatilization and combustion of biomass (sawdust, agricultural waste, etc.) will lead to better use of this renewable fuel source. The overall goal of the project is to write a computer model that can accurately predict what will occur during biomass combustion. The research conducted over the past year has focused on developing an apparatus capable of determining the needed data for model development. The apparatus, once completed, will consist of an entrained flow reactor, an optical measurement system, and a computer algorithm to process the needed data from the images.

Heats Of Combustion For Four Utah Leaf Species, Megan M. Woodhouse, Dr. Thomas Fletcher

Journal of Undergraduate Research

Empirical models have been developed to predict the spread of forest fire models from data about the burning plant species, terrain, and wind conditions. Over the past three years, a research group at Brigham Young University has collected data for ignition temperatures and time to ignition for eight leaf species involved in wildland fires. Four of these species are found in the Southern California chaparral, while the four other species are found in Utah. To further improve the fire models it is desirable to know the heats of combustion for each of the different leaf species. Heats of combustion can …

Application Of One Dimensional Turbulence (Odt) To Model Fire Spread Through Biomass Fuel Bed, Abinash Paudel

Theses and Dissertations

Each year fires destroy millions of acres of woodland, lives, and property, and significantly contribute to air pollution. Increased knowledge of the physics and properties of the flame propagation is necessary to broaden the fundamental understanding and modeling capabilities of fires. Modeling flame propagation in fires is challenging because of the various modes of heat transfer with diverse fuels, multi-scale turbulence, and complex chemical kinetics. Standard physical models of turbulence like RANS and LES have been used to understand the flame behavior, but these models are limited by computational cost and their inability to resolve sub-grid scales. Application of several …

Metal Based Reactive Nanocomposites Prepared By Cryomilling, Shasha Zhang

Dissertations

Aluminum is one of the most commonly used metal fuel additives for propellants, explosives, and pyrotechnics. Recent interest has been focused on replacements for aluminum as fuel additives to achieve higher combustion temperatures and stronger pressure pulses for applications in advanced munitions systems. Two applications are addressed in this work. In the applications for explosives designed to defeat stockpiles of chemical and biological weapons, it is of interest to develop multifunctional materials combining the high energy density of metal fuels with the biocidal activity of halogens. A challenge of this effort is to design and prepare powder-like Al-I2 materials which …

Application Of Fuel Element Combustion Properties To A Semi-Empirical Flame Propagation Model For Live Wildland Utah Shrubs, Chen Shen

Theses and Dissertations

Current field models for wildfire prediction are mostly based on dry or low-moisture fuel combustion research. To better study live fuel combustion behavior and develop the current semi-empirical bush combustion model, a laminar flow flat-flame burner was used to provide a convection heating source to ignite individual live fuel samples. In this research project, four Utah species were studied: Gambel oak (Quercus gambelii), canyon maple (Acer grandidentatum), big sagebrush (Artemisia tridentata) and Utah juniper (Juniperus osteosperma). Leaf geometrical parameters and time-dependent combustion behavior were recorded. Qualitative results included various combustion phenomena like bursting, brand formation and bending. Quantitative results included …