Chemical Engineering Commons^™

Glass Transition Temperature Of Plga Nanoparticles And The Application In Drug Delivery, Guangliang Liu

Dissertations

The glass transition temperature (T_g) of poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles plays a crucial role in governing molecular mobility, diffusion, and consequently, drug release kinetics. However, the interaction among residual surfactant, drug effect, nanoscale confinement, and release medium on T_g remains insufficiently characterized. This study aims to bridge this gap by correlating the thermal behavior of PLGA nanoparticles with their drug release behavior under physiologically relevant conditions.

In the present study, PLGA nanoparticles were synthesized using both nano-emulsion and surfactant-free nano-precipitation approaches. The influence of residual surfactants - poly(vinyl alcohol) (PVA) and didodecyldimethylammonium bromide (DMAB) - was systematically …

Membrane-Engineered Nanotherapeutic Platforms For Drug Delivery: Hollow Fiber Membrane Synthesis Of Lipid Nanoparticles, Biomimetic Nanocarriers, And Nanobubbles, Zhixiang Liu

Dissertations

Lipid-based nanocarriers have emerged as a cornerstone technology for RNA therapeutics, enabling effective intracellular delivery for applications ranging from vaccination to gene regulation. However, current manufacturing approaches, particularly microfluidic-based platforms, face inherent limitations in scalability, throughput, and structural tunability due to their reliance on confined channel geometries and restricted mixing architectures. Addressing these challenges requires fundamentally new strategies that decouple nanoparticle formation from traditional microscale flow constraints while maintaining precise control over physicochemical properties.

This dissertation presents a comprehensive framework for the design, engineering, and application of advanced lipid-based nanocarriers, centered on a hollow fiber membrane (HFM)—assisted nanopore-mediated assembly platform. …

Design And Characterization Of Lignin-Based, Thermoresponsive Soft Composites With Improved Mechanical And Transport Properties, Missoury D. Wolff

All Dissertations

In an attempt to reduce reliance on petroleum-based polymers, lignin – an abundant biopolymer – has gained popularity as a sustainable alternative. However, research on lignin-containing soft composites – i.e., hydrogel (bio)composites – has largely been heuristic, providing limited insight into the fundamental structure-processing-property relationships that govern performance improvements in this emerging class of ‘green’ soft composites. As such, this dissertation presents a systematic investigation of how lignin molecular weight (MW), composite composition, and the concentrations of crosslinker and accelerator impact the mechanical and transport characteristics of soft composites composed of lignin, poly(N-isopropylacrylamide) (PNIPAm), and poly(vinyl alcohol) (PVA).

In the …

The Interplay Between Endothelial Glycocalyx Maturity And Both The Toxicity And Intracellular Uptake Of Charged Nanoparticles, Claire A. Bridges, Lu Fu, Jonathan Yeow, Xiaojing Huang, Miriam Jackson, Rhiannon P. Kuchel, James D. Sterling, Shenda M. Baker, Megan S. Lord

Business and Information Technology Faculty Research & Creative Works

Nanoparticles are widely studied for delivering treatments to target tissues, but few have reached clinical use. Most nanoparticles encounter blood vessels on their way to target tissues. The inner surface of these vessels is lined with endothelial cells covered by a glycocalyx, an extracellular matrix rich in anionic glycans. The role of the glycocalyx in nanoparticle interactions is not well understood. Here, we demonstrate that endothelial cells need extended culture times to synthesize a mature glycocalyx. Our research shows that branched polyethyleneimine functionalized gold nanoparticles bind to endothelial cells expressing either a developing or mature glycocalyx, with the interaction involving …

Development And Characterization Of Polysaccharide-Based Controlled Drug Delivery Platforms, Amanda Pepler

Open Access Dissertations

Drug delivery research focuses on overcoming challenges in patient treatment. Most therapeutics are delivered systemically through oral or intravenous routes. However, these administration methods are often inefficient due to therapeutic hydrophobicity, poor bioavailability, and liver metabolic clearance, necessitating frequent dosing. When treatment plans require frequent dosing, patients experience significant fluctuations in therapeutic concentration in the bloodstream, which can increase adverse side effects. These factors contribute to low patient compliance. Therefore, the core focus of drug delivery research is to develop new administration routes for therapeutics. Drug delivery systems (DDS) that can target therapeutics to a localized region offer advantages over …

Delivery Of Tgfβ3 From Magnetically Responsive Coaxial Fibers Reduces Spinal Cord Astrocyte Reactivity In Vitro, Jessica L. Funnell, Jasper Fougere, Diana Zahn, Silvio Dutz, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

A spinal cord injury (SCI) compresses the spinal cord, killing neurons and glia at the injury site and resulting in prolonged inflammation and scarring that prevents regeneration. Astrocytes, the main glia in the spinal cord, become reactive following SCI and contribute to adverse outcomes. The anti-inflammatory cytokine transforming growth factor beta 3 (TGFβ3) has been shown to mitigate astrocyte reactivity; however, the effects of prolonged TGFβ3 exposure on reactive astrocyte phenotype have not yet been explored. This study investigates whether magnetic core-shell electro spun fibers can be used to alter the release rate of TGFβ3 using externally applied magnetic fields, …

Encapsulation And Release Of Calcein From Herceptin-Conjugated Eliposomes, Mah Noor Zafar, William G. Pitt, Ghaleb A. Husseini

Faculty Publications

Achieving an optimal therapeutic level is crucial in effectively eradicating cancer cells during treatment. However, conventional chemotherapy-associated systemic administration of anticancer agents leads to many side effects. To achieve the desired control over the target site, active targeting of HER2-positive breast cancer cells can be achieved by conjugating liposomal vesicles with Human Epidermal growth factor Receptor 2 (HER2) and inducing release of the encapsulated drug using ultrasound. To further enhance the delivery efficiency, nanoemulsion droplets exhibiting responsiveness to low-frequency ultrasound are encapsulated within these lipid vesicles. In this study, we prepared four different liposomal formulations, namely pegylated liposomes …

Recent Breakthroughs In Using Quantum Dots For Cancer Imaging And Drug Delivery Purposes, Aisha Hamidu, William G. Pitt, Ghaleb A. Husseini

Faculty Publications

Cancer is one of the leading causes of death worldwide. Because each person’s cancer may be unique, diagnosing and treating cancer is challenging. Advances in nanomedicine have made it possible to detect tumors and quickly investigate tumor cells at a cellular level in contrast to prior diagnostic techniques. Quantum dots (QDs) are functional nanoparticles reported to be useful for diagnosis. QDs are semiconducting tiny nanocrystals, 2–10 nm in diameter, with exceptional and useful optoelectronic properties that can be tailored to sensitively report on their environment. This review highlights these exceptional semiconducting QDs and their properties and synthesis methods when used …

Engineering Multifunctional Adhesive Hydrogel Patches For Biomedical Applications, Aishik Chakraborty, Shana Alexander, Wei Luo, Narisse Al-Salam, Mia Van Oirschot, Sudhir H. Ranganath, Subrata Chakrabarti, Arghya Paul

Chemical and Biochemical Engineering Publications

Traditional patches, such as sticking plaster or acrylic adhesives used for over a hundred years, lack functionality. To address this issue of poor functionality, adhesive hydrogel patches have emerged as an efficient bioactive multifunctional alternative. Hydrogels are three-dimensional, water-swellable, and polymeric materials closely resembling the native tissue architecture. The physicochemical properties of hydrogels can be modified easily, allowing them to be suitable for various biomedical applications. Moreover, adhesive properties can be imparted to hydrogels through physicochemical manipulations, making them ideal candidates for supplementing or replacing traditional sticking plaster. As a result, sticky hydrogel patches are widely used for transdermal drug …

Tailoring The Inherent Properties Of Biobased Nanoparticles For Nanomedicine, Alap Ali Zahid, Aishik Chakraborty, Wei Luo, Ali Coyle, Arghya Paul

Chemical and Biochemical Engineering Publications

Biobased nanoparticles are at the leading edge of the rapidly developing field of nanomedicine and biotherapeutics. Their unique size, shape, and biophysical properties make them attractive tools for biomedical research, including vaccination, targeted drug delivery, and immune therapy. These nanoparticles are engineered to present native cell receptors and proteins on their surfaces, providing a biomimicking camouflage for therapeutic cargo to evade rapid degradation, immune rejection, inflammation, and clearance. Despite showing promising clinical relevance, commercial implementation of these biobased nanoparticles is yet to be fully realized. In this perspective, we discuss advanced biobased nanoparticle designs used in medical applications, such as …

Drug Delivery On Mg-Mof-74: The Effect Of Drug Solubility On Pharmacokinetics, Neila Pederneira, Kyle Newport, Shane Lawson, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Biocompatible metal-organic frameworks (MOFs) have emerged as potential nanocarriers for drug delivery applications owing to their tunable physiochemical properties. Specifically, Mg-MOF-74 with soluble metal centers has been shown to promote rapid pharmacokinetics for some drugs. In this work, we studied how the solubility of drug impacts the pharmacokinetic release rate and delivery efficiency by impregnating various amounts of ibuprofen, 5-fluorouracil, and curcumin onto Mg-MOF-74. The characterization of the drug-loaded samples via X-ray diffraction (XRD), N2 physisorption, and Fourier transform infrared (FTIR) confirmed the successful encapsulation of 30, 50, and 80 wt % of the three drugs within the MOF structure. …

Transport Phenomena With Reactions In Drug Delivery: Towards A Quantitative Description, Xianjie Qiu, Parthasakha Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Distributed System Called a Krogh Cylinder is Used Here to Quantify the Transport of a Solute from the Capillary into the Extravascular Tissue. the Capillary Network is Broken Down into Cylindrical Cells, Each Containing a Capillary and an Appropriate Amount of Extravascular Tissue. the Flow in the Cylinder Model Has Two-Dimensional Velocities, Which Are in the Axial and Radial Directions. All Parameters of the System, together with the Geometric Ones, Have Been Included in the Model. for a Given Bioavailability, the Uptakes of Reactive and Nonreactive Solutes Have Been Obtained. Very Large or Massive Molecules Have Been Considered. the …

Dendrimer And Dendrimer Gel-Derived Drug Delivery Systems: Breaking Bottlenecks Of Topical Administration Of Glaucoma Medications, Juan Wang, Boxuan Li, Uday B. Kompella, Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Due to high structural flexibility, multidrug carrying capability, and tunable size, dendrimers have been used as suitable carriers for ophthalmic drug delivery. Drug molecules can be either encapsulated or chemically coupled to dendrimers. the nanoscopic size, spheroidal shape, and cationic surface of Poly amidoamine (PAMAM) dendrimers promote their interaction with the cornea and result in prolonged precorneal retention. Dendrimers could be further cross-linked to produce three-dimensional hydrogel networks or dendrimer hydrogels (DH). the properties of the DH can be readily adjusted to maintain both fluidity and adhesiveness, making them suitable for developing topical ocular drug formulations. Micro-/nano- sized DHs, that …

3d Printed Composite Structures For Bone Repair And Drug Delivery Application, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Due to the increase in traffic accidents, industrial contingencies, and natural disasters, there is a high demand for bone regeneration biomaterials. Although bone can regenerate and self-repair, it is difficult to do so when the defect area exceeds the critical repair area due to trauma, tumour resection, or congenital diseases. The traditional methods for bone repair are autograft, allograft, and xenograft. However, these methods have flaws and limitations, such as complications in the donor bone area, a limited number of donors, rejection, and infectious diseases. However, in recent years, the use of additive manufacturing technologies in bone tissue engineering has …

Development Of A Slow-Degrading Polymerized Curcumin Coating For Intracortical Microelectrodes, Alexis M. Ziemba, Mary Clare Crochiere Woodson, Jessica L. Funnell, Douglas Wich, Bailey Balouch, Deniz Rende, Dahlia N. Amato, Jonathan Bao, Ingrid Oprea, Dominica Cao, Neda Bajalo, Evon S. Ereifej, Jeffrey R. Capadona, Edmund F. Palermo, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Intracortical microelectrodes are used with brain-computer interfaces to restore lost limb function following nervous system injury. While promising, recording ability of intracortical microelectrodes diminishes over time due, in part, to neuroinflammation. As curcumin has demonstrated neuroprotection through anti-inflammatory activity, we fabricated a 300 nm-thick intracortical microelectrode coating consisting of a polyurethane copolymer of curcumin and polyethylene glycol (PEG), denoted as poly (curcumin-PEG1000 carbamate) (PCPC). The uniform PCPC coating reduced silicon wafer hardness by two orders of magnitude and readily absorbed water within minutes, demonstrating that the coating is soft and hydrophilic in nature. Using an in vitro release model, curcumin …

Curcumin Release From Biomaterials For Enhanced Tissue Regeneration Following Injury Or Disease, Adelle E. Hamilton, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Curcumin, a bioactive phenol derived from turmeric, is an antioxidant, anti-inflammatory, and antibacterial molecule. Although curcumin exhibits beneficial effects in its innate form, it is highly hydrophobic, which leads to poor water solubility and, consequently, low bioavailability. The lack of bioavailability limits curcumin's effectiveness as a treatment and restricts its use in clinical applications. Furthermore, to achieve beneficial, clinically relevant results, high doses of curcumin are required for systemic administration. Many researchers have utilized biomaterial carriers, including electrospun fibers, nanoparticles, hydrogels, and composite scaffolds, to overcome curcumin's principle therapeutic limitation of low bioavailability. By using biomaterials to deliver curcumin directly …

Nanomaterial Payload Delivery To Central Nervous System Glia For Neural Protection And Repair, Jayant Saksena, Adelle E. Hamilton, Ryan J. Gilbert, Jonathan M. Zuidema

Chemical and Biochemical Engineering Faculty Research & Creative Works

Central nervous system (CNS) glia, including astrocytes, microglia, and oligodendrocytes, play prominent roles in traumatic injury and degenerative disorders. Due to their importance, active pharmaceutical ingredients (APIs) are being developed to modulate CNS glia in order to improve outcomes in traumatic injury and disease. While many of these APIs show promise in vitro, the majority of APIs that are systemically delivered show little penetration through the blood–brain barrier (BBB) or blood-spinal cord barrier (BSCB) and into the CNS, rendering them ineffective. Novel nanomaterials are being developed to deliver APIs into the CNS to modulate glial responses and improve outcomes in …

The Generation And Transport Of Charged Aerosols: Fundamental Study And Applications In Medicine And Energy Conversion, Hao Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

Charged aerosols have significant implications in the field of functional material synthesis, pharmaceutical coating, and drug delivery. Electrospray systems are an effective methodology for generating highly charged monodispersed droplets in the size range from nanometer to micrometer. The prediction of surface charge, size and morphology of nanoparticles resulting from charged droplets are highly required for the precise control of nanoparticle properties and their effective utilization. However, the evolution of charged droplet is not well understood due to the existence of coulombic fission and ion evaporation processes. Thus, the goal of this dissertation is to elucidate how the precursor properties and …

Nonordered Dendritic Mesoporous Silica Nanoparticles As Promising Platforms For Advanced Methods Of Diagnosis And Therapies, S. Malekmohammadi, Riaz Ur Rehman Mohammed, H. Samadian, A. Zarebkohan, A. García-Fernández, G. R. Kokil, F. Sharifi, J. Esmaeili, M. Bhia, M. Razavi, M. Bodaghi, T. Kumeria, R. Martínez-Máñez

Department of Chemical and Biomolecular Engineering: Faculty Publications

Dendritic mesoporous silica nanoparticles (DMSNs) are a new generation of porous materials that have gained great attention compared to other mesoporous silicas due to attractive properties, including straightforward synthesis methods, modular surface chemistry, high surface area, tunable pore size, chemical inertness, particle size distribution, excellent biocompatibility, biodegradability, and high pore volume compared with conventional mesoporous materials. The last years have witnessed a blooming growth of the extensive utilization of DMSNs as an efficient platform in a broad spectrum of biomedical and industrial applications, such as catalysis, energy harvesting, biosensing, drug/gene delivery, imaging, theranostics, and tissue engineering. DMSNs are considered great …

Ph-Responsive Nanocarriers In Cancer Therapy, Nour M. Alsawaftah, Nahid S. Awad, William G. Pitt, Ghaleb A. Husseini

Faculty Publications

A number of promising nano-sized particles (nanoparticles) have been developed to conquer the limitations of conventional chemotherapy. One of the most promising methods is stimuli-responsive nanoparticles because they enable the safe delivery of the drugs while controlling their release at the tumor sites. Different intrinsic and extrinsic stimuli can be used to trigger drug release such as temperature, redox, ultrasound, magnetic field, and pH. The intracellular pH of solid tumors is maintained below the extracellular pH. Thus, pH-sensitive nanoparticles are highly efficient in delivering drugs to tumors compared to conventional nanoparticles. This review provides a survey of the different strategies …

A Wirelessly Controlled Scalable 3d-Printed Microsystem For Drug Delivery, Farzad Forouzandeh, Nuzhet N. Ahamed, Xiaoxia Zhu, Parveen Bazard, Krittika Goyal, Joseph P. Walton, Robert D. Frisina, David A. Borkholder

Chemical and Biochemical Engineering Faculty Research & Creative Works

Here we present a 3D-printed, wirelessly controlled microsystem for drug delivery, comprising a refillable micro reservoir and a phase-change peristaltic micropump. The micropump structure was inkjet-printed on the back of a printed circuit board around a catheter microtubing. The enclosure of the microsystem was fabricated using stereolithography 3D printing, with an embedded micro reservoir structure and integrated micropump. In one configuration, the microsystem was optimized for murine inner ear drug delivery with an overall size of 19 x 13 x 3 mm3. Benchtop results confirmed the performance of the device for reliable drug delivery. The suitability of the device for …

Biopolymeric Materials For Tissue Regeneration, Cell Manufacturing, And Drug Delivery, David Alfonso Castilla-Casadiego

Graduate Theses and Dissertations

The development of materials for tissue regeneration, cell manufacturing, and drug delivery is possible by the manipulation of polymer properties and the use of three different techniques including layer-by-layer, electrospinning, and molding technique.

By applying the layer-by-layer technique over biomaterials, it is possible to develop polymeric multilayers that promote a more favorable environment for cellular functionality, increasing the possibility of improving their acceptance in the area of implantation. IRVASE demonstrated being a powerful technique that allows for a reliable characterization of the physical-chemical and thermal properties of the fabricated surfaces. This opens the possibility to monitor the design of surfaces …

Assessing The Impact Of Block-Selective Homopolymers On The Diffusion Of Payload Through Polymeric Organogels, Ian Coates

Honors Theses

Styrenic polymer gels have received recent attention for their application in transdermal patches due to their unique properties. Previous research in the pharmaceutical industry has identified that polymeric gels, specifically styrenic gels, have the potential to encompass multiple functions of the transdermal delivery patch including controlling mechanical and delivery properties. To tailor styrenic gels either the gel nanostructure or the drug complex can be controlled. Specifically, this thesis investigated the effect of gel nanostructure in an attempt to control the gel diffusivity and mechanical properties. To control gel nanostructure a phase selective styrene homopolymer was used at varying concentrations. It …

The Use Of Nanoparticles And Electrospun Fibers For Intravaginal Delivery To Treat Viral And Bacterial Infections And Electrophysiological Measurements Of Synthetic Chloride Channels., Farnaz Minooei

Electronic Theses and Dissertations

Female reproductive viral and bacterial infections affect millions of women worldwide. Given the diversity and magnitude of these unmet reproductive health challenges, topical administration of antiretrovirals (ARVs) and antibiotics have emerged as promising approaches to maintain and restore reproductive health. However, currently available intravaginal dosage forms often suffer from low user adherence and the need for frequent, daily administration to achieve therapeutic effect. To address these challenges, the broad goal of this research was to focus on the development of new localized nanoparticle (NP) and electrospun fiber dosage forms to prolong the delivery and enhance the efficacy of active agents …

Aligned Fingolimod-Releasing Electrospun Fibers Increase Dorsal Root Ganglia Neurite Extension And Decrease Schwann Cell Expression Of Promyelinating Factors, Devan L. Puhl, Jessica L. Funnell, Anthony R. D'Amato, Jonathan Bao, Dmitri V. Zagorevski, Yelena Pressman, Daniel Morone, Agnes E. Haggerty, Martin Oudega, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Researchers are investigating the use of biomaterials with aligned guidance cues, like those provided by aligned electro spun fibers, to facilitate axonal growth across critical-length peripheral nerve defects. To enhance the regenerative outcomes further, these aligned fibers can be designed to provide local, sustained release of therapeutics. The drug fingolimod improved peripheral nerve regeneration in preclinical rodent models by stimulating a pro-regenerative Schwann cell phenotype and axonal growth. However, the systemic delivery of fingolimod for nerve repair can lead to adverse effects, so it is necessary to develop a means of providing sustained delivery of fingolimod local to the injury. …

Formulation Strategies To Enhance Solubility And Permeability Of Small Molecules For Drug Delivery Applications, Pradeep Kumar Bolla

Open Access Theses & Dissertations

All the new chemical entities/drug molecules intended for therapeutic use must be administered using an appropriate delivery system/dosage form to achieve maximum bioavailability. However, designing a drug delivery system is complex as several factors such as lipophilicity, molecular mass, crystallinity, ionic charge, polymorphic forms and hydrogen bonding) affect the solubility and permeability of these molecules. Biopharmaceutics drug classification system (BCS) categorizes the existing drugs into four classes based on the aqueous solubility and membrane permeability and it is reported that >70% of the drugs are poorly soluble and belong to BCS class II and BCS class IV. Several physical, chemical …

Iron-Containing Nanoparticles For The Treatment Of Chrionic Biofilm Infections In Cystic Fibrosis, Leisha M. A. Martin

Nanoscience and Microsystems ETDs

Cystic fibrosis (CF) is the most common genetic disease resulting in the morbidity and mortality of Caucasian children and adults worldwide. Due to a genetic mutation resulting in malfunction of the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein, CF patients produce highly viscous mucus in their respiratory tract. This leads to impairment of the mucociliary clearance of inhaled microbes. In addition to reduced microbial clearance, anoxic environmental conditions in the lungs promote biofilm-mode growth of the pathogenic bacterial species Pseudomonas aeruginosa. Chronic infections of P. aeruginosa begin in early childhood and typically persist until respiratory failure and death result. The …

Highly Thiolated Poly (Beta-Amino Ester) Nanoparticles For Acute Redox Applications, Andrew L. Lakes, David A. Puleo, J. Zach Hilt, Thomas D. Dziubla

Chemical and Materials Engineering Faculty Publications

Disulfides are used extensively in reversible cross-linking because of the ease of reduction into click-reactive thiols. However, the free-radical scavenging properties upon reduction are often under-considered. The free thiols produced upon reduction of this disulfide material mimic the cellular reducing chemistry (glutathione) that serves as a buffer against acute oxidative stress. A nanoparticle formulation producing biologically relevant concentrations of thiols may not only provide ample chemical conjugation sites, but potentially be useful against severe acute oxidative stress exposure, such as in targeted radioprotection. In this work, we describe the synthesis and characterization of highly thiolated poly (β-amino ester) (PBAE) nanoparticles …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Tuning Properties Of Poly(Ethylene Glycol)-Block-Poly(Simvastatin) Copolymers Synthesized Via Triazabicyclodecene, Theodora A. Asafo-Adjei, Thomas D. Dziubla, David A. Puleo

Biomedical Engineering Faculty Publications

Simvastatin was polymerized into copolymers to better control drug loading and release for therapeutic delivery. When using the conventional stannous octoate catalyst in ring-opening polymerization (ROP), reaction temperatures ≥ 200 °C were required, which promoted uncontrollable and undesirable side reactions. Triazabicyclodecene (TBD), a highly reactive guanidine base organocatalyst, was used as an alternative to polymerize simvastatin. Polymerization was achieved at 150 °C using 5 kDa methyl-terminated poly(ethylene glycol) (mPEG) as the initiator. ROP reactions with 2 kDa or 550 Da mPEG initiators were also successful using TBD at 150 °C instead of stannous octoate, which required a higher reaction temperature. …