Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1 - 30 of 2326

Full-Text Articles in Chemical Engineering

Feasibility Of Acetylated Icacina Trichantha Oliv. Tuber Starch As Viscosity And Fluid Loss Control Agents In Water-Based Drilling Mud. A Comparative Assessment With Commercial Starch, Kennedy I. Ogunwa, Theresa O. Uchechukwu, Ozioma Achugasim, Leo C. Osuji, Onyewuchi Akaranta Sep 2026

Feasibility Of Acetylated Icacina Trichantha Oliv. Tuber Starch As Viscosity And Fluid Loss Control Agents In Water-Based Drilling Mud. A Comparative Assessment With Commercial Starch, Kennedy I. Ogunwa, Theresa O. Uchechukwu, Ozioma Achugasim, Leo C. Osuji, Onyewuchi Akaranta

Tanzania Journal of Science

The need for sustainable, non-food drilling fluid additives has prompted the feasibility assessment of acetylated Icacina trichantha tuber starch as a viscosity modifier and fluid loss control agent in water-based muds. Native starch was acetylated to obtain two derivatives (Degree of Substitution DS = 0.38 and 0.68) and characterized using FTIR, swelling power, and physicochemical analyses. Drilling mud performance was assessed through rheology, gel strength, filtration loss, sorptivity, and model fitting. Acetylation improved swelling and reduced gelatinization temperature. The optimal formulation, Mud-ITO-ACS2 (DS = 0.68), exhibited the most favorable performance, combining low plastic viscosity (6 cP vs 9 cP for …

Go to article

Experimental Study On The Behavior Of High-Strength Reinforced Concrete Beams With A Longitudinal Void, With And Without Micro Steel Fibers, At Different Shear Spans, Farah M. Hussein, Saif Altai, Shatha Alasadi, Ayoob A. Ibrahim, Arshad Nadhom Shubber Sep 2026

Experimental Study On The Behavior Of High-Strength Reinforced Concrete Beams With A Longitudinal Void, With And Without Micro Steel Fibers, At Different Shear Spans, Farah M. Hussein, Saif Altai, Shatha Alasadi, Ayoob A. Ibrahim, Arshad Nadhom Shubber

Journal of Sustainable Construction Materials and Technologies

This study examines the impact of creating a longitudinal void in high-strength reinforced concrete (RC) beams to decrease concrete volume. Testing involved three groups: solid beams (SB), beams with a 75 mm void (VB), and beams with a void incorporating 1.2% micro-steel fibers (VBSF), across various shear spans (a/d) of 1.8, 2.7, and 3.6. Results indicated that increased a/d led to a 54.2% reduction in peak loads and a 119.2% increase in deflection for solid beams. The void negatively affected load-bearing at a/d = 1.8 with a 25% peak load reduction and brittle failure. At a/d = 2.7, effects were …

Go to article

Dense Platinum Nanoparticles Confined In Mn-N-C Nanocages For Robust Heavy-Duty Pemfcs, Lei Zhao, Zhen-Min Cao, Jia-Yu Zuo, Ming-Liang Yang, Hong-Yan Qiao, Jun-Song Chen, Rui Wu Sep 2026

Dense Platinum Nanoparticles Confined In Mn-N-C Nanocages For Robust Heavy-Duty Pemfcs, Lei Zhao, Zhen-Min Cao, Jia-Yu Zuo, Ming-Liang Yang, Hong-Yan Qiao, Jun-Song Chen, Rui Wu

Journal of Electrochemistry

High-loading Pt cathodes are essential for heavy-duty proton exchange membrane fuel cells but suffer from a critical tradeoff between ionomer sulfonate poisoning and nanoparticle instability. Herein, we report a spatial confinement strategy to encapsulate dense Pt nanoparticles (~51.8 wt%) within Mn/N-co-doped mesoporous carbon nanocages (denoted as Pt-MnNC). This architecture excludes bulky ionomers to create an ionomer-shielded environment against sulfonate poisoning, while Mn-Nx-mediated strong metal-support interactions anchor the Pt nanoparticles to prevent agglomeration and further boost durability. In the 5 × 5 cm2 membrane electrode assembly tests, the Pt-MnNC catalyst delivers an exceptional power density of 1.26 W·cm …

Go to article

Engineering Small-Sized Cations With Strong Solvation For High-Voltage Supercapacitors, Tong Huo, Pan Liu, Hao Chen, Peng Zhang, Zhen-Lei Chen, Guo-Fu Sun, Zhi-Qiang Shi, Jing Wang Sep 2026

Engineering Small-Sized Cations With Strong Solvation For High-Voltage Supercapacitors, Tong Huo, Pan Liu, Hao Chen, Peng Zhang, Zhen-Lei Chen, Guo-Fu Sun, Zhi-Qiang Shi, Jing Wang

Journal of Electrochemistry

Supercapacitors (SCs) have attracted much attention in the field of energy storage due to their high power density and long cycle life. However, their relatively low energy density limits their application in a wider range of fields. Methods to increase energy density include enhancing specific capacitance and extending operating voltage window. Herein, we report a novel electrolyte salt, tetramethylammonium bis(fluorosulfonyl)imide (TMA-FSI), the resulting electrolyte formed with propylene carbonate (PC), designated as TMF, exhibited a wide electrochemical stability window (ESW) of 5.09 V. On the one hand, we found that the small size of TMA+ enables it to enter the …

Go to article

Efficient Acidic H2O2 Electrosynthesis Over Co Atoms Anchored On Nitrogen-Doped Hierarchical Porous Carbon, Xiao Huang, Zi-Hao Zhan, Hao-Xu Niu, Guan-Yu Luo, Jin-Tao Huang, Bo-Xuan Jin, De-Li Wang Sep 2026

Efficient Acidic H2O2 Electrosynthesis Over Co Atoms Anchored On Nitrogen-Doped Hierarchical Porous Carbon, Xiao Huang, Zi-Hao Zhan, Hao-Xu Niu, Guan-Yu Luo, Jin-Tao Huang, Bo-Xuan Jin, De-Li Wang

Journal of Electrochemistry

The two-electron oxygen reduction reaction (2e− ORR) presents a promising route for the on-site production of hydrogen peroxide (H2O2), offering a green alternative to energy-consuming anthraquinone process. However, the high selectivity toward the competing 4e− ORR over the desired 2e− pathway leads to low Faradaic efficiency for H2O2, posing a critical challenge in catalyst design. In this work, a nitrogen-doped hollow hierarchical porous carbon with anchored Co atoms (CoN/HPC) was constructed for high-performance H2O2 production. The as-prepared Co-N/HPC catalyst showed excellent 2e− ORR performance, achieving …

Go to article

Complementary Thermodynamic Mechanisms Of Boron And Carbon Segregation At Grain Boundaries In Nickel Alloys, Tyler D. Dolezal, Rodrigo Freitas, Ju Li Sep 2026

Complementary Thermodynamic Mechanisms Of Boron And Carbon Segregation At Grain Boundaries In Nickel Alloys, Tyler D. Dolezal, Rodrigo Freitas, Ju Li

Faculty Publications

Grain boundary stabilization by light interstitials is central to the performance of Ni-based superalloys, yet the thermodynamic mechanisms governing their interactions with substitutional chemistry remain poorly resolved. Here, we use hybrid Monte Carlo molecular dynamics simulations to quantify how boron and carbon modify the thermodynamic, structural, and chemical ordering of grain boundaries in Ni-Cr alloys. By analyzing interfacial state variables, site-resolved segregation spectra, local chemical ordering, and structural evolution, we show that boron and carbon stabilize grain boundaries through complementary pathways. Carbon drives saturation-controlled stabilization by recruiting Cr and conditioning boundary chemistry, while suppressing temperature-driven structural transformations of the boundary. …

Go to article

Physical Modeling To Represent Molten-Slag Entrapment Behavior Into Molten-Steel Under Simultaneous Similitude Condition Of Multiple Dimensionless Numbers, Yuichi Tsukaguchi, Sho Nakano Sep 2026

Physical Modeling To Represent Molten-Slag Entrapment Behavior Into Molten-Steel Under Simultaneous Similitude Condition Of Multiple Dimensionless Numbers, Yuichi Tsukaguchi, Sho Nakano

Progress in Scale Modeling, an International Journal

Physical model construction and experiment are essential for scientific investigations of flow phenomena such as high temperature two phase flow of molten metal and inert gas. It has been a common method to construct a physical model with a convenient scale then proceed experiments under similitude condition of one or two dimensionless number(s) of dominant forces to represent. It is an ideal experimental method to satisfy the simultaneous similitude condition of multiple dimensionless numbers concerned with the objective flow phenomena but has been considered difficult or impossible to realize for many years. Contrarily, the concept of the simultaneous similitude of …

Go to article

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid Sep 2026

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid

Journal of Sustainable Construction Materials and Technologies

The use of precast concrete structures with grouted sleeve (GS) connections has gained significant traction in the acceleration of bridge construction. The plastic hinge length (Lp) is a critical parameter for assessing the seismic performance and deformation capacity of such structural members. The previous study has proposed empirical equations for Lp in monolithic columns; however, a comprehensive understanding of the influential parameters on Lp in precast concrete columns with GS connections remains limited. This study presents a detailed parametric investigation to evaluate the effects of key design parameters on the plastic hinge length of a precast concrete columns with GS …

Go to article

Engineered Porous Structures For Propellants Using Additive Manufacturing, Elbert Caravaca Aug 2026

Engineered Porous Structures For Propellants Using Additive Manufacturing, Elbert Caravaca

Dissertations

Foamed polymers are widely used today for shock absorption and packaging materials to prevent damage to their contents. Typical foamed densities vary from 0.1 g/cm3 to 0.4 g/cm3 depending on the polymeric materials used. There is a need to explore foaming densities above 0.4 g/cm3 for propellants with highly engineered surface area progression for increased combustion performance. One way to achieve this is through highly controlled and engineered graded foam structures. To further exploit this approach, additive manufacturing coupled with a tunable means to generate foamed structures is the target of this work. To generate foam structures …

Go to article

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao Aug 2026

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao

Journal of Electrochemistry

Seawater electrolyte-based metal-air batteries exhibit great promise for marine energy supply systems. However, conventional statistical analysis methods, though applicable to seawater metal-air battery lifetime prediction, have inherent limitations of insufficient prediction accuracy and large error. Herein, a deep time-series regression framework based on InceptionTime and incorporating prior-biased attention pooling is proposed to construct a nonlinear mapping between electrochemical performance sequences and the discharge termination time of catalysts. Specifically, chronoamperometric profiles are employed to extract long-term stability features, while prior knowledge derived from linear sweep voltammetry is introduced to strengthen the attention weighting over critical potential regions. Under a nested leave-one-catalyst-out …

Go to article

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang Aug 2026

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang

Journal of Electrochemistry

Developing cost-efficient and durable multifunctional electrocatalysts of hydrogen evolution reaction, oxygen reduction reaction and oxygen evolution reaction is crucial for improving energy conversion efficiency in electrolytic water splitting electrolyzer and advancing rechargeable zinc-air batteries. Polyhedral shaped nanocrystals with well-defined crystal facets represent a type of model catalysts that enables the exploration of structure-activity relationships. However, it is still very challenging to prepare alloy nanocrystals with multiple metal components due to their complicated redox potentials and mixing enthalpy. Herein, we report a rapid microwave-assisted polyol reduction method for syntheses of core-shell Pd@PdPtCu, Pd@PdPtCuNi, Pd@PdPtCuCo and Pd@PdPtCuZn octahedral nanocrystals, and recessed truncated-octahedral …

Go to article

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li Aug 2026

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li

Journal of Electrochemistry

Electrocatalytic nitrate reduction to ammonia (NitRR) represents a sustainable pathway that integrates environmental remediation with the production of high-value ammonia. However, the activity and selectivity of this process are limited by the generation, consumption, and dynamic equilibrium of the key transient intermediate—active hydrogen (*H). Precise modulation of *H necessitates a comprehensive understanding of its behavior, which relies fundamentally on advanced in situ electrochemical characterization techniques. However, a systematic review dedicated to the rational selection and application of in situ electrochemical techniques for the specific characterization of *H in NitRR, with clear definitions of each technique's "detectable targets, quantitative accuracy, and …

Go to article

Synergistic Reinforcement Of Lignin–Chitosan Hydrogels Using Vanillin As A Sustainable Green Crosslinker, Moses Ayitey-Adjin Jr., Mohammad Jahid Hasan, Jeremy Erb, Kishore Chand, Garry S. Crosson, Kenya Crosson, Esteban Ureña-Benavides, Erick Salvador Vasquez-Guardado Aug 2026

Synergistic Reinforcement Of Lignin–Chitosan Hydrogels Using Vanillin As A Sustainable Green Crosslinker, Moses Ayitey-Adjin Jr., Mohammad Jahid Hasan, Jeremy Erb, Kishore Chand, Garry S. Crosson, Kenya Crosson, Esteban Ureña-Benavides, Erick Salvador Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

While bio-based hydrogels derived from lignin and chitosan are promising sustainable adsorbents, their practical application is hindered by poor mechanical stability. This study addresses this limitation by synthesizing lignin-chitosan hydrogels using vanillin as a green, bio-derived crosslinker via a facile solution-casting method. The formation of imine (Schiff base) linkages between the aldehyde groups of vanillin and the primary amines of chitosan was confirmed by FTIR spectroscopy (C = N stretching at ~ 1602 cm− 1). SEM and TGA results demonstrated a reduction in the pore size of the crosslinked hydrogel and an enhanced residual thermal mass. Rheological and …

Go to article

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa Aug 2026

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Go to article

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa Aug 2026

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Go to article

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih Aug 2026

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Go to article

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo Aug 2026

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Go to article

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu Jul 2026

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu

Journal of Electrochemistry

Green hydrogen production via alkaline seawater electrolysis offers an environmentally sustainable and potentially cost-effective route to address both energy and climate challenges. Achieving long-term anode stability under complex ionic environments and industrial current densities remains a central bottleneck. Specifically, Ni-based anodes exhibit intense surface reconstruction during the oxygen evolution reaction, necessitating dynamic anti-corrosion strategies. This mini review systematically summarizes reconstruction engineering approaches to develop anti-corrosion Ni-based anodes of alkaline seawater electrolysis across increasingly complex ionic environments from simulated seawater to real seawater: (i) Cl– dominated; (ii) Cl– with co-existing oxyanions, and (iii) Cl–  with co-existing Br– …

Go to article

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang Jul 2026

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang

Journal of Electrochemistry

Mullite-structured oxides exhibit excellent oxygen reduction reaction activity, possess a low thermal expansion coefficient due to their unique crystal structure, and can eliminate the need for a barrier layer and simplify the preparation process as they contain no alkaline earth elements. Thus, they hold great promise as novel cathode materials for solid oxide fuel cells. In this work, a mullite-spinel-structured SmMn2O5-NiMn2O4 (SMO-NMO) composite cathode was one-step synthesized via a solid-liquid composite route, and its in-situ self-assembly enabled good compatibility with the electrolyte without any barrier layer. Characterization results showed that the SMO:NMO = …

Go to article

In Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu Jul 2026

In Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu

Journal of Electrochemistry

Para-aminothiophenol (PATP) is not only a widely-used probe molecule in the field of surface-enhanced Raman spectroscopy (SERS), but also an important model molecule for interfacial reactions, exhibiting distinct photo- and electro-oxidation pathways, so that PATP is selectively activated under different external fields. The evolution of products and intermediates during electrochemical oxidative coupling remains unknown. In this study, we have investigated the dynamic electrochemical oxidation process of PATP on the Au(111) surface using cyclic voltammetry, electrochemical (EC)-SERS, and in situ electrochemical scanning tunneling microscopy (EC-STM). The results showed that PATP forms an unsaturated adsorption coverage on Au(111) in an acidic solution. …

Go to article

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah Jul 2026

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah

Journal of Mechanical Engineering Science and Technology (JMEST)

Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO2-Al2O3 hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO2-Al2O3 mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results …

Go to article

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly Jul 2026

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The construction sector faces increasing pressure to reduce embodied carbon and adopt circular material strategies, with bio-based materials offering a promising pathway. Straw-based insulation, particularly in loose-fill form, has gained traction in Europe, where several products have achieved certification under EAD 040138-01-1201. This study investigates the potential of Irish-processed straw chip as a bio-based insulative infill for framed construction by evaluating its material properties and thermal conductivity–density performance relative to European ETA-certified reference products. A programme of laboratory testing was undertaken on commercially available Irish straw samples, including material characterisation (moisture content, particle morphology, and dust content) and thermal conductivity …

Go to article

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa Jul 2026

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa

Journal of Sustainable Construction Materials and Technologies

The construction industry urgently requires sustainable alternatives to petroleum-based insulation materials such as expanded polystyrene (EPS) and mineral wool. Mycelium-based biocomposites offer a promising solution by valorizing agricultural waste while delivering competitive thermal and acoustic performance. In this study, developed and characterized biocomposites using Ganoderma lucidum mycelium combined with spent yerba mate and residual sunflower oil (70 g/30 mL), both commonly generated as waste in Argentine institutions. Two formulations were evaluated: high density (HD: 280 ± 5 kg/m³) and low density (LD: 185 ± 5 kg/m³). Samples were cultivated for 90 days at 28 °C and 65% relative humidity and …

Go to article

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch Jul 2026

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Go to article

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek Jul 2026

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek

Journal of Sustainable Construction Materials and Technologies

This study reveals the potential substitution of silica fume and eggshell ash in the technique of soil stabilization, varying across distinct proportions in the modification of geotechnical parameters. The untreated kaolinitic soil which has low soil bearing capacity in nature is frequently reflected in its mechanical instability, for instance, soil settlement and extreme compressibility. By associating the industrial and agricultural material, it is potentially to resolve the above-mentioned issues with explicit designs. A number of laboratory approaches have been implemented in the assessment of basic geotechnical properties, including grain size distribution, Atterberg limits, specific gravity, proctor properties, and shear strength …

Go to article

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju Jul 2026

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Go to article

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf Jul 2026

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf

Journal of Sustainable Construction Materials and Technologies

This study explores climate-responsive design in domestic architecture, focusing on the application and effectiveness of passive strategies across various climatic regions, including the UK, hot-arid, tropical, and cold climates. A qualitative comparative case study method was used to explore different passive design strategies, integration of sustainability, procurement, the coordination of stakeholders, and compliance with regulations in residential architectural projects under varying climate conditions. Drawing from a combination of historical case studies and original architectural projects, the research evaluates how spatial configuration, material selection, solar orientation, shading, ventilation, and insulation are optimized to achieve thermal comfort and energy efficiency. In temperate …

Go to article

Compound Role Of Using Advanced Materials And Design Procedures On Improving The Performance Of Baghdad Buildings Facades, Abeer Qasim Jbur Jun 2026

Compound Role Of Using Advanced Materials And Design Procedures On Improving The Performance Of Baghdad Buildings Facades, Abeer Qasim Jbur

Al-Esraa University College Journal for Engineering Sciences

The research idea addresses improving the thermal performance of buildings in Baghdad by selecting and employing facade materials to reduce heat gain and energy consumption associated with cooling in a hot-dry climate. The study discusses the pivotal role of facade materials in interacting with solar radiation, heat transfer, and inward thermal transmittance, as well as their capacity to store and release heat in ways that maintain thermal comfort within architectural spaces and reduce reliance on mechanical cooling systems. A range of traditional materials such as stone, earth, and concrete is presented alongside modern materials like high-performance glass and thermal storage …

Go to article

Current Condition Of The Holy Kadhimiya Shrine Surveying Using A Gpr, Israa Hatem Jun 2026

Current Condition Of The Holy Kadhimiya Shrine Surveying Using A Gpr, Israa Hatem

Al-Esraa University College Journal for Engineering Sciences

This study describes the extensive survey of the Holy Kadhimiya Shrine in Baghdad, Iraq, carried out with the use of a non-invasive geophysical instrument called Ground Penetrating Radar (GPR) to assess the conditions of subsurface and the condition of the infrastructure in the site. The total area of the shrine is 19,575 m2 that was systematically studied with the help of internal measures, satellite imagery and radar profiling. The frequency antennas used for the GPR survey were the 250 MHz, 500 MHz, and 800 MHz which have a penetration depth of 1-15 m. Specialized software packages (Ground Vision, Reexplore …

Go to article

Static Analysis-Based Android Malware Detection (2021–2026): A Systematic Survey And Taxonomy, Ali Hussein Mohammed Ali, Musaab Riyadh Abdulrazzaq Jun 2026

Static Analysis-Based Android Malware Detection (2021–2026): A Systematic Survey And Taxonomy, Ali Hussein Mohammed Ali, Musaab Riyadh Abdulrazzaq

Al-Esraa University College Journal for Engineering Sciences

Android malware is not only increasing in size and sophistication but is also a challenge to be detected on a large scale. Static analysis is popular due to its ability to detect malware without running applications or tracing run-time events. However, features, datasets, labeling methods, and assessment methodology differ, which makes studying performance difficult. This is a systematic study of 78 peer reviewed articles written between 2021 and 2026 regarding the Android malware detection by static analysis. In each of the studies, the current survey cover the following feature source, feature representation and engineering, learning paradigms, datasets and labeling methods, …

Go to article

Next Last