Chemical Engineering Commons^™

Analysis Of Sunflower Shells By X-Ray Photoelectron Spectroscopy, Guilin Jiang, Ghaleb A. Husseini, Larry Lin Baxter, Matthew R. Linford

Faculty Publications

Determining the chemical structure and composition of biomass fuels using x-ray photoelectron spectroscopy (XPS) can provide fundamental knowledge of their structures that is useful in understanding and predicting their combustion behavior. Sunflower shells are an example of an agricultural residue (byproduct of food and feed production) of potential interest for biomass combustion. The XPS spectra of sunflower shells provide both its elemental composition and indications of its bonding. Traditional fuel analyses of this fuel are also provided. These include: ultimate analysis — the elemental composition of the overall fuel (C, H, N, S, and O); chlorine analysis — reported here …

Research Article| December 30 2005 Analysis Of Shea Nut Shells By X-Ray Photoelectron Spectroscopy, Guilin Jiang, Ghaleb A. Husseini, Larry Lin Baxter, Matthew R. Linford

Faculty Publications

Determining the chemical structure and composition of biomass fuels using x-ray photoelectron spectroscopy (XPS) can provide fundamental knowledge of their structures that is useful in understanding and predicting their combustion behavior. Shea nut shells are an example of an agricultural residue (byproduct of food and feed production) of potential interest for biomass combustion. The XPS spectra of shea nut shells provide both its elemental composition and indications of its bonding. Traditional fuel analyses of this fuel are also provided. These include: ultimate analysis — the elemental composition of the overall fuel (C, H, N, S, and O); chlorine analysis — …

Analysis Of Grain Screenings By X-Ray Photoelectron Spectroscopy, Guilin Jiang, Ghaleb A. Husseini, Larry Lin Baxter, Matthew R. Linford

Faculty Publications

Determining the chemical structure and composition of biomass fuels using x-ray photoelectron spectroscopy XPS can provide fundamental knowledge of their structures that is useful in understanding and predicting their combustion behavior. Grain screenings are an example of an agricultural residue byproduct of food and feed production of potential interest for biomass combustion. The XPS spectra of grain screenings provide both its elemental composition and indications of its bonding. Traditional fuel analyses of this fuel are also provided. These include: ultimate analysis — the elemental composition of the overall fuel C, H, N, S, and O; chlorine analysis — reported here …

Analysis Of Sawdust By X-Ray Photoelectron Spectroscopy, Guilin Jiang, Ghaleb A. Husseini, Larry Lin Baxter, Matthew R. Linford

Faculty Publications

Determining the chemical structure and composition of biomass fuels using x-ray photoelectron spectroscopy XPS can provide fundamental knowledge of their structures that is useful in understanding and predicting their combustion behavior. Sawdust is an example of a forest product residue byproduct of paper and lumber production of potential interest for biomass combustion. The XPS spectra of sawdust provide both its elemental composition and indications of its bonding. Traditional fuel analyses of this fuel are also provided. These include: ultimate analysis — the elemental composition of the overall fuel C, H, N, S, and O; chlorine analysis — reported here as …

Analysis Of Sugar Beet Pulp By X-Ray Photoelectron Spectroscopy, Guilin Jiang, Ghaleb A. Husseini, Larry Lin Baxter, Matthew R. Linford

Faculty Publications

Determining the chemical structure and composition of biomass fuels using x-ray photoelectron spectroscopy XPS can provide fundamental knowledge of their structures that is useful in understanding and predicting their combustion behavior. Sugar beet pulp is an example of an agricultural residue byproduct of food and feed production of potential interest for biomass combustion. The XPS spectra of sugar beet pulp provide both its elemental composition and indications of its bonding. Traditional fuel analyses of this fuel are also provided. These include: ultimate analysis — the elemental composition of the overall fuel C, H, N, S, and O; chlorine analysis — …

Analysis Of Straw By X-Ray Photoelectron Spectroscopy, Guilin Jiang, Ghaleb A. Husseini, Larry Lin Baxter, Matthew R. Linford

Faculty Publications

Determining the chemical structure and composition of biomass fuels using x-ray photoelectron spectroscopy XPS can provide fundamental knowledge of their structures that is useful in understanding and predicting their combustion behavior. Straw is an example of an agricultural residue byproduct of food and feed production of potential interest for biomass combustion. The XPS spectra of straw provide both its elemental composition and indications of its bonding. Traditional fuel analyses of this fuel are also provided. These include: ultimate analysis — the elemental composition of the overall fuel C, H, N, S, and O; chlorine analysis — reported here as part …

Experimental Study Of The Solids Velocity Field In Gas-Solid Risers, Satish Bhusarapu, Muthanna H. Al-Dahhan, Milorad P. Duduković, Steven Trujillo, Timothy J. O'Hern

Chemical and Biochemical Engineering Faculty Research & Creative Works

Solids Flow Dynamics in Gas-Solid Risers is Inherently Complex. Model Refinement through Experimental Validation Requires the Acquisition of Detailed Nonintrusive Measurements. in This Study, Noninvasive Computer-Automated Radioactive Particle Tracking (CARPT) is Employed to Visualize and Quantify in a Three-Dimensional Domain the Solids Dynamics and Mixing in Gas-Solid Risers. This Technique Has the Added Advantage that, along with the Derived Eulerian Solids Flow Field (Time-Average Velocity Map and Various Turbulence Parameters Such as the Reynolds Stresses, Turbulent Kinetic Energy), It Also Provides Directly the Lagrangian Description of the Solids Motion. the Solids Velocity Field Data Are Obtained in Two Different Risers …

Green Engineering And Gate-To Gate Life Cycle Assessments For Pharmaceutical Products, Daniel Fichana

Theses and Dissertations

The research of this thesis focused on the environmental and processing metrics during the development of two different drugs. Previous research in life cycle assessments and green engineering have focused on other products and processes, but only a limited amount of studies have been conducted for pharmaceutical applications. This analysis concerned a gate-to-gate analysis of two distinct pharmaceutical products along with the development of a solvent selection table. The goal of this research was to determine how various processing and environmental metrics were affected by process improvements.

The first drug was the pravastatin, which was made via a fermentation route. …

A New Method For The Rapid Calculation Of Finely-Gridded Reservoir Simulation Pressures, Benjamin Arik Hardy

Theses and Dissertations

A new method for the determination of finely-gridded reservoir simulation pressures has been developed. It is estimated to be as much as hundreds to thousands of times faster than other methods for very large reservoir simulation grids. The method extends the work of Weber et al. Weber demonstrated accuracies for the pressure solution normally requiring millions of cells using traditional finite-difference equations with only hundreds of cells. This was accomplished through the use of finite-difference equations that incorporate the physics of the flow. Although these coarse-grid solutions achieve accuracies normally requiring orders of magnitude more resolution, their coarse resolution does …

Reactivity Study Of Platinum Nanoparticles And Nanowires Inside The Channels Of Mesoporous Silica, Marcus R. Smith

Chemical and Biological Engineering ETDs

Pt metal nanowires and nanoparticles were prepared using mesoporous silica as the template. Mesoporous silica with straight 1-dimensional, tortuous 1-dimensional and 3-dimensional channels was used. The experimental techniques included CO oxidation, Chemisorption, XRD, and STEM. CO oxidation and chemisorption provided the data to calculate the intrinsic reactivity, known as turn over frequency (TOF). Powder XRD was used to measure line broadening. The FWHM of the XRD line broadening was used with the Scherrer formula to determine Pt metal crystallite size. STEM images permitted for the measurement of the particle diameters, and the determination of morphology.

Two commercially available reference samples …

The Deactivation Mechanism Of Metal Oxide Anodes Under Alternative Current Electrolysis Condition, Jun-Tao Wang, Yan Han, Guang-Zhang Chen, Wen-Fa Liu

Journal of Electrochemistry

The metal oxide anodes coated on titanium used in seawater electrolysis were prepared by thermal decomposition. Their morphologies, compositions and phase structures were determined by scanning electron microscope(SEM), energy dispersive X-ray detector(EDX) and X-ray diffraction(XRD). The electrochemical properties of the anodes were characterized by accelerated life test, cyclic voltammetry and electrochemical impedance spectroscopy. SEM, EDX and XRD showed that solid solution structures of (Ru, Ir, Ti)O₂ and (Ir, Ti)O₂ were formed after pyrolysis, the solid solution structures and active components were disappeared after the deactivation of the anodes. Electrochemical results indicated that the active area decreased and the …

Electrochemical Oxidation Of Organic Additives In Tin Plating Electrolytes, Yin-Mei Cheng, Lan-Kun Cai, Qiang Song

Journal of Electrochemistry

Cyclic voltammetry(CV) was used to characterize the voltammetric behaviours of organic additives, e.g. PSA(phenolsulfonic acid) EN(ethoxylatedα-naphthol) and ENSA(ethoxylatedα-naphthol sulfonic acid), on the anode surface. In PSA solutions, an anodic peak was obtained and the peak potential was about 1.2V. In EN and ENSA solutions, two anodic peaks were obtained and the peak potentials were about(0.95V) and 1.3V. The products of galvanostatic electrolysis were separated by HPLC(high performance liquid chromatography) and analyzed by EI/MS(electron ionizing mass spectrometry). The mechnism of the electrochemical oxidation was also disussed.

The Electrocatalystic Investigation Of 3,4-Dihydroxybenzoic Acid On The Modified Multiply Wall Carbon Nanotubes, Ming-Qi Li, Duo-Chang Cai, Xiao-Ying He

Journal of Electrochemistry

The electrochemical behavior of 3,4-Dihydroxybenzoic acid(DHBA) on modified multiply wall carbon nanotubes electrode was investigated by cyclic voltammetry(CV) and square wave voltammetry(SWV). Results show that in 0.1 mol/L HCl solutions the modified carbon nanotube electrode has an obvious electrocatalytic effect on the oxidation and deoxidization of DHBA. The oxidation current of DHBA is linear to it's concentration in the range of 4.0×10^-6～1.0×10^-4 mol/L and 2.0×10^-4～8.0×10^-4 1mol/L with correlation coefficient of 0.9995 and 0.9992. The detection limit is 1.0×10^-6 mol/L.

Solid Oxide Fuel Cells-Materials And Prospects, Molenda Janina, Marzec Jacek

Journal of Electrochemistry

The paper summarizes and discusses the basic properties of solid oxide fuel cell (SOFC) components (electrode materials and electrolyte) from the point of view of their essential functional parameters suck as chemicalstability, transport, catalytic and thermomechanical properties under operational conditions in a SOFC. An interrela-tion between the defect structure of these materials related to oxygen nonstoichiometry and their electronic propertiesand catalytic activity was shown. Single-chamber fuel cell concept was also presented.

A Continuous Operation For Electroreduction Of Oxalic Acid To Glyoxylic Acid, Xiao-Hui Hu, Xiang-Fei Yan, Yu-Zhong Su, Jun Li, Qing-Biao Li

Journal of Electrochemistry

A simulative-continuous-operation approach was proposed to study the continuous operation for electroreduction of oxalic acid to gloxylic acid using a packed bed reactor and a parallel reactor with cooled cathode in order to solve the low productivity problem in current state by using traditional reactor. The effects of the concentration of oxalic acid and temperature on this process were also studied. Results showed that,after 30min of the reaction(residence time), the mass fraction of the produced glyoxylic acid in the catholic solution could reach 3.76% and 3.66% with respect to a saturated oxalic acid method and a step-temperature decreasing method. From …

Mpsa Effects On Copper Electrodeposition: Understanding Molecular Behavior At The Electrochemical Interface, Clint Gordon Guymon

Theses and Dissertations

In this work the structure of the electrochemical metal-liquid interface is determined through use of quantum mechanics, molecular simulation, and experiment. Herein are profiled the molecular dynamics details and results of solid-liquid interfaces at flat non-specific solid surfaces and copper metal electrodes. Ab initio quantum-mechanical calculations are reported and define the interatomic potentials in the simulations. Some of the quantum-mechanical calculations involve small copper clusters interacting with 3-mercaptopropanesulfonic acid (MPSA), sodium, chloride, bisulfate and cuprous ions. In connection with these I develop the electrode charge dynamics (ECD) routine to treat the charge mobility in a metal. ECD bridges the gap …

Synthesis Of Fuel Cell Membrane: Copolymerization Of Styrene On Etfe Film By Grafted Pre-Irradiation, Yohan Yohan, Rifai M. Nur, Lilik Hendrajaya, E. S. Siradj

Makara Journal of Technology

Synthesis of Fuel Cell Membrane: Copolymerization of Styrene on ETFE Film by Grafted pre-Irradiation. Preirradiation Grafting styrene monomer on ETFE film has been prepared. Research has been performed by γ-ray radiation at various total dose from 2.5 – 12.5 kGy and various dose rate from 1.3 – 1.9 kGy/hour. Irradiated copolymer is then grafted by styrene monomer in various solvent: ethanol, 2-propanol, and toluene, various concentration from 20 – 70% volume, various temperature from 50 – 90oC, and various grafting time from 2 – 12 hours. The results showed that percent of grafting is increase with increase of total dose …

Design Of Product Placement Layout In Retail Shop Using Market Basket Analysis, Isti Surjandari, Annury Citra Seruni

Makara Journal of Technology

Retailing is an industry with high level of competition. It is a customer-based industry which depends on how it could be aware of what the customers’ needs and requirements are. One technique most used in supermarkets is the mix merchandise. The purpose of this paper is to identify associated products, which then grouped in mix merchandise with the use of market basket analysis. This association between products then will be applied in the design layout of the product in the supermarket. The process of identifying the related products bought together in one transaction is done by using data mining technique. …

Production Hydrogen And Nanocarbon Via Methane Decomposition Using Ni-Based Catalysts. Effect Of Acidity And Catalyst Diameter, Widodo W. Purwanto, M. Nasikin, E. Saputra, L. Song

Makara Journal of Technology

Objectives of this research are mainly to study impacts of acidity strength (by varying amount of precipitant and loading Al-Si) and the effect of nickel particle size (by varying calcinations temperature) on decomposition reaction performances. In this research, high-nickel-loaded catalyst is prepared with two methods. Ni-Cu/Al catalysts were prepared with co-precipitation method. While the Ni-Cu/Al-Si catalyst were prepared by combined co-precipitation and sol-gel method. The direct cracking of methane was performed in 8mm quartz fixed bed reactor at atmospheric pressure and 500-700°C. The main results showed that the Al content of catalyst increases with the increasing amount of precipitant. The …

Design And Implementation Of 1-2 Ghz Stepped Frequency Gpr For Buried Metal Detection, Joko Suryana, Andriyan B. Suksmono, Tati R. Mengko

Makara Journal of Technology

Design and Implementation of 1-2 GHz Stepped Frequency GPR for Buried Metal Detection. In this paper, we describe the design and realization steps of 1 – 2 GHz SFGPR (Stepped Frequency Ground Penetrating Radar) transceiver for metal detection under the ground. Before using prototyped GPR for detecting the metal under the ground, several of calibration processes must be performed, namely phase calibration and monocycle pulse waveform calibration. After completing the calibrations, this prototyped GPR would be ready for detecting a hidden object such as a metal plate 5 cm under the ground in our small test range size 25 cm …

Simultaneous Treatment Of Organic (Phenol) And Heavy Metal (Cr6+ Or Pt4+) Wastes Over Tio2, Zno-Tio2 And Cds-Tio2 Photocatalysts, Slamet Slamet, R. Arbianti, Daryanto Daryanto

Makara Journal of Technology

Simultaneous Treatment of Organic (Phenol) and Heavy Metal (Cr6+ or Pt4+) Wastes over TiO2, ZnO-TiO2 and CdS-TiO2 Photocatalysts. Treatment of heavy metal (Cr6+ and Pt4+) and organic (phenol) wastes has been studied using the relatively new method, i.e. simultaneous photocatalytic process over TiO2 photocatalysts in the batch photoreactor. Following the photocatalytic reduction of the heavy metal wastes, recovery of Cr and Pt was carried out by precipitation and leaching method, respectively. The experimental results show that in the simultaneous photocatalytic system, there is a synergism effect between the photocatalytic reduction of heavy metal waste (Cr6+ or Pt4+) and the oxidation …

Design Of Generating Dual Frequency Operation For Triangular Microstrip Antenna Using Electromagnetic Coupling, Indra Surjati, Eko Tjipto Rahardjo, Djoko Hartanto

Makara Journal of Technology

Design of Generating Dual Frequency Operation for Triangular Microstrip Antenna Using Electromagnetic Coupling. A new design is proposed in this paper by applying a pair of slits using a microstrip feed line. Therefore the microstrip line feeding system is electromagnetically coupled to the patch. The antenna works at two different frequencies in the range from 2 GHz to 4 GHz (S band frequency). The results of the simulation shows that the dual frequency operation can be created when the slit width is 1 mm and the height of the slits ranges from 10 mm to 14 mm with inter slit …

Development Of Low Frequency Vibration Method Of Direct-Write Deposition Relevant To Layer Manufacturing Application, Susilo Adi Widyanto, Alva Edy Tontowi, Jamasri Jamasri, Heru Santosa Budi Rochardjo

Makara Journal of Technology

The research of deposition process is the first step in development process of multi materials selective laser sintering. The deposition process enables to settle multi materials powder in horizontal formation on one layer. In this research we use low frequency (70 - 200Hz) to vibrate a hopper nozzle in which powder is settled. The research method consists of two steps, the first step is to determine flow-ability parameters and the second is to join flow ability parameter with other parameters such that the line width can be controlled. The results show that the line width depends on uniformity of particle …

Solids Flow Mapping In A High Pressure Slurry Bubble Column, Novica Rados, Ashfaq Shaikh, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Successful Design and Scale-Up of Slurry Bubble Column Reactors (SBCRs) Require Proper Understanding of How Operating Conditions Affect their Flow Behavior. Presently, there is Little Information on the Flow Dynamics of Solids (E.g., Distribution of Velocities and Turbulent Parameters) in Slurry Systems that Are Operated at Industrially Relevant Conditions of High Pressure, High Superficial Gas Velocities, and High Solids Loading. Computer Automated Radio Particle Tracking (CARPT) is Widely Recognized as One of a Few Techniques that Can Be Reliably Used Even in Highly Turbulent and Opaque Slurry Flows. This Work Utilizes an Improved CARPT Technique to Investigate the Effect of …

Coupling Between Helix-Coil And Coil-Globule Transitions In Helical Polymers, Vikas Varshney, Gustavo A. Carri

College of Polymer Science and Polymer Engineering

We explore the coupling between the helix-coil and coil-globule transitions of a helical polymer using Monte Carlo simulations. A very rich state diagram is found. Each state is characterized by a specific configuration of the chain which could be a helix, a random coil, an amorphous globule, or one of various other globular states which carry residual helical strands. We study the boundaries between states and provide further insight into the physics of the system with a detailed analysis of the order parameter and other properties.

Properties Model For Aqueous Sodium Chloride Solutions Near The Critical Point Of Water, Bing Liu

Theses and Dissertations

Traditional excess Gibbs energy models in terms of temperature, pressure, and concentration become progressively less effective in describing the thermodynamics of aqueous solutions at temperatures above 300 ¢ªC, and are totally inadequate in the critical region of water. This deficiency is due to the strong ion association and the large property fluctuations (such as density) with small variations in pressure, temperature, and solute concentration around the critical point of water. In this work, a speciation-based model has been developed to describe the thermodynamic properties of aqueous sodium chloride solutions in the critical region of water. The anomalous fluctuation problem is …

Royal Society Of Chemistry - Gold-Plated Bacteria, Ravi F. Saraf, Vikas Berry

Department of Chemical and Biomolecular Engineering: News Releases

No Abstract

Confinement-Induced Ordering Of Alkanes Between An Elastomer And A Solid Surface, Kumar Nanjundiah, Ali Dhinojwala

College of Polymer Science and Polymer Engineering

We have studied the molecular structure of liquid alkanes confined between a flexible elastomeric poly(dimethyl siloxane) lens and a rigid sapphire substrate using surface-sensitive infrared-visible sum frequency generation spectroscopy. The reduction in the gauche defects suggests ordering of liquid alkanes under confinement. The cooling of confined liquid below the freezing temperature leads to crystallization with alkane molecules lying on the substrate with the symmetry axis parallel to the surface normal. This structure is very different from the bulk alkane crystals next to sapphire or air interfaces.

The Role Of Cavitation In Acoustically Activated Drug Delivery, Mario A. Diaz, Ghaleb A. Husseini, William G. Pitt, Eric S. Richardson, Douglas A. Christensen

Faculty Publications

The triblock copolymer, Pluronic P105, has been found to be an ideal ultrasonically activated drug delivery vehicle because it forms micelles with hydrophobic polypropylene oxide cores that sequester hydrophobic drugs (Fig. 1). These micelles release their contents upon the application of low frequency ultrasound [1]such that drugs can be released specifically at the ultrasonicated region (Fig. 2). Such ultrasonically controlled release has been effective against cancer cells in vitro [2] and in vivo [3]. This poster presents our results showing that collapse cavitation is associated with drug release. Cavitation is generally divided into two types of behavior. Stable cavitation is …

Nature - Nanotechnology-Live Wire, Ravi F. Saraf, Vikas Berry

Department of Chemical and Biomolecular Engineering: News Releases

No Abstact.