Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2022

Discipline
Institution
Keyword
Publication
Publication Type

Articles 1 - 30 of 652

Full-Text Articles in Chemical Engineering

Faceted Nanomaterial Synthesis, Characterizations And Applications In Reactive Electrochemical Membrane Filtration, Qingquan Ma Dec 2022

Faceted Nanomaterial Synthesis, Characterizations And Applications In Reactive Electrochemical Membrane Filtration, Qingquan Ma

Dissertations

Facet engineering of nanomaterials, especially metals and metal oxides has become an important strategy for tuning catalytic properties and functions from heterogeneous catalysis to electrochemical catalysis, photocatalysis, biomedicine, fuel cells, and gas sensors. The catalytic properties are highly related to the surface electronic structures, surface electron transport characteristics, and active center structures of catalysts, which can be tailored by surface facet control. The aim of this doctoral dissertation research is to study the facet-dependent properties of metal or metal oxide nanoparticles using multiple advanced characterization techniques. Specifically, the novel atomic force microscope-scanning electrochemical microscope (AFM-SECM) and density functional theory (DFT) …

Go to article

Hydrodynamic Investigation Of The Discharge Of Complex Fluids From Dispensing Bottles Using Experimental And Computational Approaches, Baran Teoman Dec 2022

Hydrodynamic Investigation Of The Discharge Of Complex Fluids From Dispensing Bottles Using Experimental And Computational Approaches, Baran Teoman

Dissertations

The discharge of non-Newtonian, complex fluids through orifices of industrial tanks, pipes, dispensers, or packaging containers is a ubiquitous but often problematic process because of the complex rheology of such fluids and the geometry of the containers. This, in turn, reduces the discharge rate and results in residual fluid left in the container, often referred to as heel. Heel formation is undesired in general, since it causes loss of valuable material, container fouling, and cross-contamination between batches. Heel may be of significant concern not only in industrial vessels but also in consumer packaging. Despite its relevance, the research in this …

Go to article

Microhydrodynamic, Kinetic And Thermal Modeling Of Wet Media Milling For Process Optimization And Intensification, Gulenay Guner Dec 2022

Microhydrodynamic, Kinetic And Thermal Modeling Of Wet Media Milling For Process Optimization And Intensification, Gulenay Guner

Dissertations

Nanoparticle production by wet stirred media milling (WSMM) is a common method for the formulation of poorly water-soluble drugs. While most of the studies in the WSMM literature focus on the formulation aspects to overcome the stability challenges, a thorough mechanistic understanding of the process is lacking, and the process is slow, costly, and energy-intensive. This dissertation presents experimental and modeling work with the ultimate goals of (i) gaining a deeper and more mechanistic understanding of the WSMM process and breakage kinetics of the particles using a microhydrodynamic model with various improvements and advancements, (ii) examining the heat dissipation during …

Go to article

A Novel Biomaterial Platform For Cardiac Tissue Engineering, Andrew House Dec 2022

A Novel Biomaterial Platform For Cardiac Tissue Engineering, Andrew House

Dissertations

Heart disease is one of the leading causes of death in the world. With a growing demand for in vitro cardiac models that can recapitulate the complex physiology of the cardiac tissue, there is a desire to create novel therapies and treatments. However, due to a lack of fundamental understanding of the heart's inflammatory response to myocardial infarction, the development of new therapies is both time consuming and costly. In this work, a novel approach to fabricating a dynamic hydrogel cardiac platform is reported. This platform better mimics the dynamic changes occurring in the native cardiac tissue microenvironment during cardiac …

Go to article

Manufacturing Of Instrument Structures From Formed Silicide Films, I R. Bekpulatov Dec 2022

Manufacturing Of Instrument Structures From Formed Silicide Films, I R. Bekpulatov

Technical science and innovation

This work provides information on the formation of the main part of thermal radiation receivers. In addition, the article defines and creates optimal modes for creating targets for magnetron sputtering from higher manganese silicide (Mn4Si7) and cobalt monosilicide (CoSi). As is known, the device is formed from a two - type film, where the Mn4Si7 film gives the p - type, and the CoSi film gives the n - type. Films were formed using these targets by magnetron sputtering and their electrophysical properties were studied. The results obtained showed that the resulting films …

Go to article

Preparation Of Azomethine Derivatives (Schif Bases) Chitosan Apis Mellifera, A S. Mengliev, G A. Ikhtiyarova Dec 2022

Preparation Of Azomethine Derivatives (Schif Bases) Chitosan Apis Mellifera, A S. Mengliev, G A. Ikhtiyarova

Technical science and innovation

Chitin and chitosan should be considered as derivatives of cellulose. The basis for such an approach to these polysaccharides is their chemical structure. The macromolecular chains of these polymers are formed by glucopyranose cycles, which, being connected by β- (1→4) glucosidic bonds, form linear polymer chains. The biological functions and mechanical properties of these polysaccharides are largely determined by the conformation of macromolecules and the distribution of reactive groups in them. Due to the unique properties of chitin and chitosan, they are becoming increasingly important in the practical and especially in the medical and biological activities of mankind. The aim …

Go to article

A Comparison Of Techniques Of Boron Removal From Water And Wastewater, Abdolmajid Fadaei Dec 2022

A Comparison Of Techniques Of Boron Removal From Water And Wastewater, Abdolmajid Fadaei

Journal of Environmental Science and Sustainable Development

Boron is a vital trace element required by plants, humans, and animals. It is also a significant element used in several industries. Along with the widespread usage of boron, boron waste progressively contaminates the potable water sources as well as causing a chain of environmental and health challenges to occur. This study reviews the techniques used for boron removal from aqueous solutions, including ion exchange, resin adsorption, reverse osmosis (RO), electrocoagulation, microfiltration, chemical coagulation, solvent extraction, electro dialytic, and hybrid processes. A review search was carried out from the databases Scopus, PubMed, Web of Knowledge, and Embase using the following …

Go to article

Laboratory Analyzes For Determining The Antioxidant Activity Of Dried Red Hawthorn Fruits, T T. Raxmanova, N A. Afanaseva, Sh A. Sultanova Dec 2022

Laboratory Analyzes For Determining The Antioxidant Activity Of Dried Red Hawthorn Fruits, T T. Raxmanova, N A. Afanaseva, Sh A. Sultanova

Technical science and innovation

This article analyzes the drying process of hawthorn fruit found in mountainous regions of our country. Since red hawthorn fruit is considered one of the main medicinal products, it is important to dry it while preserving its antioxidant properties. Blanching technology was used in a convective drying device for drying while maintaining the antioxidant properties of the object. In the process of blanching, a solution of ordinary water and citric acid was used. 1 and 1.5% solution of citric acid solution was selected. Blanching technology was used before drying the hawthorn fruit. Red hawthorn fruit was dried until 15% moisture …

Go to article

Design And Implementation Of Cardiopulmonary Resuscitation Simulation Model, Mbazingwa Mkiramweni Dec 2022

Design And Implementation Of Cardiopulmonary Resuscitation Simulation Model, Mbazingwa Mkiramweni

Tanzania Journal of Engineering and Technology (TJET)

Cardiopulmonary resuscitation (CPR) is a life-saving procedure that can multiply a person's chances of survival after a cardiac arrest. The effectiveness of CPR procedures is heavily influenced by the individual skills of the rescuer providing assistance. Chest compressions delivered at an appropriate depth and rate, allowing full chest recoil and with minimal interruptions, are critical for improving cardiac arrest survival. The lack of quality CPR training models in developing countries has a significant impact on the quality of CPR training and skills acquired. Therefore, in this paper, we aim at improving CPR training by designing a high-fidelity CPR training manikin. …

Go to article

Properties Of (Cd, Zn)S Films Deposited By Dc Co-Sputtering, Lwitiko P. Mwakyusa Dec 2022

Properties Of (Cd, Zn)S Films Deposited By Dc Co-Sputtering, Lwitiko P. Mwakyusa

Tanzania Journal of Engineering and Technology (TJET)

CdS thin film is commonly used as a buffer layer in most thin film solar cells. However, the buffer layer with less absorption in the visible region of the solar spectrum as well as that which provides perfect lattice matching with the absorbers is required. The incorporation of Zn in the CdS films can affect the structural and optical properties of the buffer layer. In this work, films of CdS and (Cd,Zn)S films were deposited by DC sputtering utilizing CdS and Zn targets. The concentration of Zn in the CdS was varied by changing the sputtering power of the Zn …

Go to article

Synthesis, Characterisation And Catalytic Evaluation Of Castor Oil-Templated Mesoporous Sulfated Solid Acid Catalysts For Esterification Reaction, Steven Nyandoro Pr Dec 2022

Synthesis, Characterisation And Catalytic Evaluation Of Castor Oil-Templated Mesoporous Sulfated Solid Acid Catalysts For Esterification Reaction, Steven Nyandoro Pr

Tanzania Journal of Engineering and Technology (TJET)

In bio-refinery and other catalytic reactions, heterogeneous catalysts confer advantage over homogenous catalysts due to minimized recovery and separation costs. However, templating surfactant and solid support for the synthesis of heterogeneous catalysts ought to consider their cheap sources and environmentally friendliness for their sustainable use. Thus, with the vision to make the process significantly benign, in the present work, solid acids were synthesised from renewable sources (castor oil as surfactant and rice husk as the source of silica). The synthesised castor oil-templated mesoporous sulfonic acid modified catalysts (SO3H-MTS and SO3H-MT-RHS) were characterised and evaluated for catalytic esterification of acetic acid …

Go to article

Optimization Of Pulsed Laser Deposition Parameters For Single Crystalline (011) Oriented Tetragonal Pzt Thin Films, Mahamudu H. Mtebwa Dec 2022

Optimization Of Pulsed Laser Deposition Parameters For Single Crystalline (011) Oriented Tetragonal Pzt Thin Films, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

Recent advances in nanotechnology applications require the processing of high-quality thin films. A systematic study of the optimization of Pulsed deposition parameters for (110) oriented tetragonal PZT thin films is reported in this work. Prior to film deposition, a highly tetragonal Pb(Zr0.5, Ti0.95) or PZT 05/95 was selected to be deposited on (110) oriented Strontium titanate, SrTiO3 substrate, STO(110) to insure small compressive misfit strain. Unlike SRO, the LSOM bottom electrode was then successfully grown at 620 °C, 1.0 J/cm2 and a target-substrate distance of 3.9 cm. Finally, deposition parameters of PZT were progressively optimized through monitoring film morphological changes. …

Go to article

Lead Acid Battery Recycling In The Current Tanzania Industrialization Drive: Challenges And Opportunities, Divina D. Kaombe Dec 2022

Lead Acid Battery Recycling In The Current Tanzania Industrialization Drive: Challenges And Opportunities, Divina D. Kaombe

Tanzania Journal of Engineering and Technology (TJET)

ABSTRACT Advancements in automotive technologies, Information and Communications Technology and renewable energy technologies have increased the use of lead acid batteries as a source of portable and rechargeable energy. This has considerably increased the number of spent batteries with adverse effects on the environment and human health; which calls for recycling of spent batteries. This work was conducted to investigate challenges facing the formal business of recycling spent batteries and potential manufacturers of new lead-acid batteries in Tanzania. The work involved collection of information from key stakeholders such as collectors, dealers, Tanzania Revenue Authority and recyclers. It was found out …

Go to article

A Chemical Study Of Archaeometallurgical Ceramics From Southwestern Tanzania, Edwinus Lyaya Dec 2022

A Chemical Study Of Archaeometallurgical Ceramics From Southwestern Tanzania, Edwinus Lyaya

Tanzania Journal of Engineering and Technology (TJET)

Archaeometallurgical ceramics, including furnaces, tuyères, and potteries, were required for successful pre-industrial iron smelting and refining. However, there are limited chemical studies on archaeometallurgical ceramics in Tanzania. This paper examined the nature of clay source in terms of refractoriness, determined whether there were multiple clay sources, and verified the refractoriness of the archaeometallurgical ceramics. An x-ray fluorescence (XRF) analytical technique and experimental re-firing of the archaeometallurgical ceramics were employed. The chemical data clustered in the mullite region on the Al2O3-SiO2-FeO ternary system indicate that iron smelters and refiners chose refractory clay sources for making archaeometallurgical ceramics. Small range and standard …

Go to article

Determination Of Effectiveness Of Combined Biological And Physicochemical Treatment Of Vinasse, Mahir Mohammed Said Dec 2022

Determination Of Effectiveness Of Combined Biological And Physicochemical Treatment Of Vinasse, Mahir Mohammed Said

Tanzania Journal of Engineering and Technology (TJET)

Combined biological and Physicochemical treatment method was used to treat vinasse using microorganisms (Aspergillus niger (fungi) and Bacillus subtilis (bacteria)), coagulants (aluminium sulphate (Al2(SO4)3) and iron III chlorides (FeCl3)) and followed by filtration. Three factors; coagulant type, type of microorganism and coagulant concentration was analysed using full factorial design (2n) with replication, on their percentage removal of Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD), Total Suspended Solids (TSS) and turbidity. Pareto chart and regression analysis with a 95% confidence interval (5% significant level) were used to analyse the results using MINITAB 22 (current version). Initially, the vinasse had (COD), …

Go to article

Performance Evaluation Of Udsm Network To Deliver Multimedia Elearning Contents: Case Of Coict, Mercy Mbise Dec 2022

Performance Evaluation Of Udsm Network To Deliver Multimedia Elearning Contents: Case Of Coict, Mercy Mbise

Tanzania Journal of Engineering and Technology (TJET)

The use of technology in education in Sub-Saharan Africa has been reported to be hindered by many factors including inadequate Information and Communication Technology (ICT) infrastructure, low internet speed, and lack of skills to use educational technologies. This paper aim at evaluating how the available ICT infrastructure at the College of Information and Communication Technologies (CoICT) can support, with acceptable Quality of Service (QoS), the delivery of multimedia applications for eLearning services. The evaluation was performed over a network testbed implemented in a computer laboratory for wired and wireless connections. The testbed consisted of five personal computers (PCs) connected via …

Go to article

Damage Stability Study Of A 500 Dw Ro-Ro Ferry Vessel, Zulfaidah Ariany, Budhi Santoso, Sarwoko Sarwoko, Nauval Abdurrahman Prasetyo Dec 2022

Damage Stability Study Of A 500 Dw Ro-Ro Ferry Vessel, Zulfaidah Ariany, Budhi Santoso, Sarwoko Sarwoko, Nauval Abdurrahman Prasetyo

Makara Journal of Technology

The development of the crossing transportation industry is currently increasing in the island areas. The use of Ro-Ro type ferry boats is extremely efficient in moving people, goods, and vehicles. The current research focuses on the damage stability of the 500 DWT Ro-Ro ferry, which aims to meet the needs of the Ro-Ro ferry in the archipelago area. The previously existing initial design of a barge hull with a main size Lpp = 40.15 m, B = 12 m, H = 3.2 m, and T = 2.15 m was used to analyze the damage stability condition further. First, the drawings …

Go to article

Utilization Of Biopertalite For Fuel Efficiency And Reduction In Co And Co2 Gas Emissions In Four-Wheel Motor Vehicles, Ridwan Iskandar, Hadiyanto Hadiyanto, Suherman Suherman, Zainul Akmar Zakaria Dec 2022

Utilization Of Biopertalite For Fuel Efficiency And Reduction In Co And Co2 Gas Emissions In Four-Wheel Motor Vehicles, Ridwan Iskandar, Hadiyanto Hadiyanto, Suherman Suherman, Zainul Akmar Zakaria

Makara Journal of Technology

Emissions of carbon monoxide (CO) and carbon dioxide (CO2) gases are the main problem that must be rectified as they are harmful and contribute to global warming through the greenhouse gas effect. In Indonesia, motor vehicles, especially four wheelers, are one of the biggest contributors with up to 71 million tons of CO2 emissions and energy consumption of 179 million barrel of oil equivalent. Bioethanol has octane rating >100, which is higher than that of gasoline; and emission contribution of only 0.02 kg/L, which is lower than that from gasoline (2.23 kg/L). Accordingly, a mixture of gasoline and bioethanol is …

Go to article

Comparative Analysis Of Injection Of Pyrolysis Oil From Plastics And Gasoline Into The Engine Cylinder And Atomization By A Direct High-Pressure Injector, Magdalena Szwaja, Jeffrey Naber, David Shonnard, Daniel G. Kulas, Ali Zolghadr, Stanislaw Szwaja Dec 2022

Comparative Analysis Of Injection Of Pyrolysis Oil From Plastics And Gasoline Into The Engine Cylinder And Atomization By A Direct High-Pressure Injector, Magdalena Szwaja, Jeffrey Naber, David Shonnard, Daniel G. Kulas, Ali Zolghadr, Stanislaw Szwaja

Michigan Tech Publications, Part 1

The article discusses the results of experimental studies on the course of pyrolysis oil injection through the high-pressure injector of a direct-injection engine. The pyrolysis oil used for the tests was derived from waste plastics (mainly high-density polyethylene—HDPE). This oil was then distilled. The article also describes the production technology of this pyrolysis oil on a laboratory scale. It presents the results of the chemical composition of the raw pyrolysis oil and the oil after the distillation process using GC-MS analysis. Fuel injection tests were carried out for the distilled pyrolysis oil and a 91 RON gasoline in order to …

Go to article

Temporal Changes In Extracellular Vesicle Hemostatic Protein Composition Predict Favourable Left Ventricular Remodeling After Acute Myocardial Infarction, Xiong Chang Lim, Chenyuan Huang, Siti Maryam J.M. Yatim, Suet Yen Chong, Sock Hwee Tan, Xiaoxun Yang, Caryn L. Heidt, Jodi Pedersen, Michael Talanker, Harshvardhan Modh, Matthias G. Wacker, Giorgia Pastorin, Siew Pang Chan, A. Mark Richards, Chris J. Charles, Mark Y. Chan, Jiong Wei Wang Dec 2022

Temporal Changes In Extracellular Vesicle Hemostatic Protein Composition Predict Favourable Left Ventricular Remodeling After Acute Myocardial Infarction, Xiong Chang Lim, Chenyuan Huang, Siti Maryam J.M. Yatim, Suet Yen Chong, Sock Hwee Tan, Xiaoxun Yang, Caryn L. Heidt, Jodi Pedersen, Michael Talanker, Harshvardhan Modh, Matthias G. Wacker, Giorgia Pastorin, Siew Pang Chan, A. Mark Richards, Chris J. Charles, Mark Y. Chan, Jiong Wei Wang

Michigan Tech Publications, Part 1

The subset of plasma extracellular vesicles (EVs) that coprecipitate with low-density lipoprotein (LDL-EVs) carry coagulation and fibrinolysis pathway proteins as cargo. We investigated the association between LDL-EV hemostatic/fibrinolysis protein ratios and post-acute myocardial infarction (post-AMI) left ventricular (LV) remodeling which precedes heart failure. Protein concentrations of von Willebrand factor (VWF), SerpinC1 and plasminogen were determined in LDL-EVs extracted from plasma samples obtained at baseline (within 72 h post-AMI), 1 month and 6 months post-AMI from 198 patients. Patients were categorized as exhibiting adverse (n = 98) or reverse (n = 100) LV remodeling based on changes in LV end-systolic volume …

Go to article

Surface Modification Of 3d Printed Microfluidic Devices For Controlled Wetting In Two-Phase Flow, Chandler A. Warr, Nicole G. Crawford, Gregory P. Nordin, William G. Pitt Dec 2022

Surface Modification Of 3d Printed Microfluidic Devices For Controlled Wetting In Two-Phase Flow, Chandler A. Warr, Nicole G. Crawford, Gregory P. Nordin, William G. Pitt

Faculty Publications

Microfluidic devices (MFDs) printed in 3-D geometry using digital light projection to polymerize monomers often have surfaces that are not as hydrophobic as MFDs made from polydimethylsiloxane. Droplet microfluidics in these types of devices are subject to droplet adhesion and aqueous spreading on less hydrophobic MFD surfaces. We have developed a post-processing technique using hydrophobic monomers that renders the surfaces of these devices much more hydrophobic. The technique is fast and easy, and involves flowing monomer without initiator into the channels and then exposing the entire device to UV light that generates radicals from the initiator molecules remaining in the …

Go to article

Magnetized Inulin By Fe3o4 As A Bio-Nano Adsorbent For Treating Water Contaminated With Methyl Orange And Crystal Violet Dyes, Kamran Valizadeh, Amir Bateni, Nazanin Sojoodi, Maryam Rostami Ataabadi, Amir Hossein Behroozi, Ali Maleki, Zhenjiang You Dec 2022

Magnetized Inulin By Fe3o4 As A Bio-Nano Adsorbent For Treating Water Contaminated With Methyl Orange And Crystal Violet Dyes, Kamran Valizadeh, Amir Bateni, Nazanin Sojoodi, Maryam Rostami Ataabadi, Amir Hossein Behroozi, Ali Maleki, Zhenjiang You

Research outputs 2022 to 2026

Current work focuses on fabricating a new bio-nano adsorbent of Fe3O4@inulin nanocomposite via an in-situ co-precipitation procedure to adsorb methyl orange (MO) and crystal violet (CV) dyes from aqueous solutions. Different physical characterization analyses verified the successful fabrication of the magnetic nanocomposite. The adsorbent performance in dye removal was evaluated by varying initial dye concentration, adsorbent dosage, pH and temperature in 5110 mg/L, 0.10.8 g/L, 111 and 283 – 338 K, respectively. Due to the pH of zero point of charge and intrinsic properties of dyes, the optimum pHs were 5 and 7 for MO and …

Go to article

Application Of Distributed Fiber-Optic Sensing For Pressure Predictions And Multiphase Flow Characterization, Gerald Kelechi Ekechukwu Dec 2022

Application Of Distributed Fiber-Optic Sensing For Pressure Predictions And Multiphase Flow Characterization, Gerald Kelechi Ekechukwu

LSU Doctoral Dissertations

In the oil and gas industry, distributed fiber optics sensing (DFOS) has the potential to revolutionize well and reservoir surveillance applications. Using fiber optic sensors is becoming increasingly common because of its chemically passive and non-magnetic interference properties, the possibility of flexible installations that could be behind the casing, on the tubing, or run on wireline, as well as the potential for densely distributed measurements along the entire length of the fiber. The main objectives of my research are to develop and demonstrate novel signal processing and machine learning computational techniques and workflows on DFOS data for a variety of …

Go to article

Formation And Interrogation Of A Modeling Excel Database For Sorbent Preconcentrate With Gc/Ms, Lisa Caravello Dec 2022

Formation And Interrogation Of A Modeling Excel Database For Sorbent Preconcentrate With Gc/Ms, Lisa Caravello

Chemical and Biological Engineering ETDs

Volatile organic compounds (VOCs) are of great interest and the subject of much research, as they can be used in various applications. Preconcentrating this class of analytes is necessary as they can be elusive with simple sampling techniques. VOCs are often captured using sorbents in thermal desorption tubes as preconcentrates prior to analysis, commonly gas chromatography mass spectroscopy (GCMS). There are gaps in knowledge in behavior of materials used as sorbents i.e., if they will retain an analyte of interest appropriately. In this research I seek to eliminate speculation and unknown variables of analyte and sorbent combinations by creating a …

Go to article

Structure And Morphology Of Photoreactive Monomer–Nanoparticle Mixtures Under Patterned Irradiation, Shreyas Pathreeker Dec 2022

Structure And Morphology Of Photoreactive Monomer–Nanoparticle Mixtures Under Patterned Irradiation, Shreyas Pathreeker

Dissertations - ALL

Establishing processing–structure relationships is central to materials science. In this work, we seek answers to whether morphology can be controlled during Light–Induced Self–Writing (LISW) in polymer composite materials, and if yes, how? LISW is based on the ability of light to undergo divergence–free propagation in photoreactive media due to photopolymerization–induced rise in refractive index of the medium. Notably, LISW in polymeric materials has found use predominantly for the fabrication of optical waveguides but has not been explored in polymer–inorganic mixtures. Using through–mask projection which creates a spatially periodic array of optical beams, this work extends LISW to nanoparticle–monomer mixtures to …

Go to article

Synthesis And Characterization Of Hybrid Catalysts For Fischer-Tropsch Jet Fuel Production, Jack M. Steinagel Dec 2022

Synthesis And Characterization Of Hybrid Catalysts For Fischer-Tropsch Jet Fuel Production, Jack M. Steinagel

Honors College Theses

Climate change is a major issue that our world is facing today. Finding renewable options for current infrastructure is paramount to solving this issue. Fischer-Tropsch synthesis of syngas from gasified biomass can produce renewable fuels that can be used in current conventional combustion engines. In order to make this process more industrially viable, a higher selectivity towards the desired range of liquid hydrocarbon products must be achieved. A novel way to do this is to introduce a catalyst to the Fischer-Tropsch reaction. The catalyst’s physical and chemical properties can promote chain growth of specific hydrocarbons. For the purpose of this …

Go to article

Investigating The Support For Agility In Developing Government Software Systems: A Case Of Three East African Countries, Leonard Peter Binamungu Dec 2022

Investigating The Support For Agility In Developing Government Software Systems: A Case Of Three East African Countries, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Agile Software Development Methods support an iterative and incremental way of developing software systems while responding to change by prioritising various aspects at different times. This differs from traditional sequential methods like Waterfall, in which one software development stage has to be completed before starting the next stage. To produce software systems that meet the requirements of their institutions, several governments in Africa have issued standards and guidelines to be followed during the development of government software systems. Such standards and guidelines specify the specific activities and deliverables for each stage of software development. While well-intentioned, such guidelines and standards …

Go to article

A Robust Random Forest Prediction Model For Mother-To-Child Hiv Transmission Based On Individual Medical History, Rebecca Chaula Dec 2022

A Robust Random Forest Prediction Model For Mother-To-Child Hiv Transmission Based On Individual Medical History, Rebecca Chaula

Tanzania Journal of Engineering and Technology (TJET)

Human Immunodeficiency Virus (HIV) continues to be a leading cause of mortality and reduces manpower throughout the world. HIV transmission from mother to child is still a global challenge in health research. According to UNAIDS, in every 7 girls, 6 are found to be newly infected among adolescents whereby 15-24 years are likely to be living with HIV which is the maternal age and likely to transfer to the child. Machine learning methods have been used to predict HIV/AIDS transmission from mother to child but left behind some important considerations including the use of patient-level information and techniques in balancing …

Go to article

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson Dec 2022

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson

Chemical Engineering and Materials Science Faculty Research Publications

Strategies for mitigating the impacts of cyberattacks on control systems using a control-oriented perspective have become of greater interest in recent years. Our group has contributed to this trend by developing several methods for detecting cyberattacks on process sensors, actuators, or both sensors and actuators simultaneously using an advanced optimization-based control strategy known as Lyapunov-based economic model predictive control (LEMPC). However, each technique comes with benefits and limitations, both with respect to one another and with respect to traditional information technology and computer science-type approaches to cybersecurity. An important question to ask, therefore, is what the goal should be of …

Go to article

Structure And Dynamics Of Lignin In Condensed Phase For Biomass Conversion, Nusrat Jahan Dec 2022

Structure And Dynamics Of Lignin In Condensed Phase For Biomass Conversion, Nusrat Jahan

Theses and Dissertations

Lignocellulosic biomass represents the largest potential volume and lowest cost for biofuel and biochemical production. Harnessing the full potential of the lignocellulosic biomass for low-carbon energy requires the knowledge of efficient breakdown and fractionation of its carbohydrates and lignin. Organic solvent pretreatment is recognized as an emerging way ahead because of its inherent advantages, such as the ability to fractionate lignocellulosic biomass into cellulose, lignin, and hemicellulose components with high purity, as well as easy solvent recovery and solvent reuse. Through all-atom MD simulation, we analyze the conformational transition of diverse lignin molecules in varying concentration of Methanol/water , DMSO/water …

Go to article

Next Last