Chemical Engineering Commons^™

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Integrasi Metodologi Hazop Dalam Pengendalian Risiko Dan Keberlanjutan Operasional Pada Unit Pemulihan Urea: Studi Kasus Pada Industri Pupuk, Riny Yolandha Parapat, Arin Nur'aini Putri, Aryasatya Ramadhan Sukresno

National Journal of Occupational Health and Safety

The fertilizer industry is one of the chemical sectors with high-risk potential due to its operational processes involving hazardous materials as well as extreme pressure and temperature conditions. This study aims to identify and analyze hazards in the urea recovery unit using the Hazard and Operability Study (HAZOP) method, while also formulating effective risk control strategies to support the operational sustainability of the plant. The study was conducted directly at a commercial fertilizer plant in West Java using a semi-quantitative approach, which included field observations, review of technical documents such as Process Flow Diagrams (PFD), Piping and Instrumentation Diagrams (P&ID), …

Intelligent Manufacturing Of Edible Oil: From Smart Sensing To Big Data Platform, Ru Jiang, Nadirbek Yusupbekov

Chemical Technology, Control and Management

With the rapid advancement of Industry 4.0 technologies, intelligent manufacturing and big data platforms are profoundly transforming the production models of the traditional edible oil industry. The edible oil production process involves multiple complex unit operations such as refining, decolorization, and deodorization, which impose high requirements on process control and product quality monitoring. This paper presents a systematic review of key technological advances in the field of intelligent manufacturing of edible oil, establishing a comprehensive technical framework encompassing four dimensions: smart sensing, artificial intelligence applications, IoT communication, and big data platforms. The review begins by analyzing the global background and …

Data-Driven Neuro-Fuzzy Modeling And Rule Optimization For Intelligent Prediction Of Bioreactor Dynamics, Kamala Najaf Mammadzada

Chemical Technology, Control and Management

Modeling wastewater bioreactors is a challenging problem in environmental engineering because the processes are constantly changing and the microorganisms do not behave in a linear or predictable way. This makes it difficult to predict and control the system behavior. This research investigates three artificial intelligence approaches for modeling wastewater bioreactors: the Mamdani Fuzzy Inference System (FIS), the Adaptive Neuro-Fuzzy Inference System (ANFIS), and clustering-based fuzzy models. These models help us predict what is happening in the bioreactors. For instance they help us predict how the amount of substances in the water is changing over time like dS₀/dt dSs/dt …

Regular Synthesis Algorithms Of Control Devices In Nonlinear Control Systems, Husan Zakirovich Igamberdiyev, Iskandar Yusupovich Abdurakhmanov, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

This paper examines the development of regularized algorithms for synthesizing control devices in control systems for polynomial objects, described by multidimensional Volterra functional series. The synthesis problem is solved using a two-stage procedure. In the first stage, the optimization problem is initially solved for an open-loop system. The second stage involves determining the parameters of the control device, i.e., its impulse response functions, by using the relationship between the characteristics of the open-loop and closed-loop systems. Regular algorithms are presented for finding the impulse response functions of the control device based on methods for regularizing the solution of operator equations …

Increasing The Prediction Accuracy Of Plant Oil Production Processes Through Adjusting The Parameters Of Machine Learning Models, Umidjon Ruziev, M.K. Shodiev, A.T. Rajabov

Chemical Technology, Control and Management

Vegetable oil production is characterized by high variability in output indicators due to nonlinear interactions between raw material parameters, equipment modes, and heat and mass transfer conditions. Existing approaches to applying machine learning in this field, as a rule, do not account for the impact of hyperparameter adjustments on forecasting quality across specific technological stages. The article presents a systematic methodology for adjusting model parameters (Ridge regression, SVR, GBM, LSTM) applied to three key tasks: predicting residual oil content in oil cake, color index during bleaching, and free fatty acid content during deodorization. In a set of 1000 observations, including …

Rdm Interval Arithmetic Based Weapon System Evaluation, Konul Imran Jabbarova Phd

Chemical Technology, Control and Management

For solving this issue, the paper considers a hierarchical multi-criteria decision-making problem, where the choice of a company that corresponds best to the criteria is required. Data used in this problem are presented in the form of intervals, which makes it possible to cope with uncertainty in the problem solution. Several companies working in missile production industry are chosen as alternatives for analysis. Evaluation of the selected alternatives is made based on five criteria clusters. More than twenty criteria are taken into account during evaluation.

Solving this problem is achieved with the help of the technique based on computation of …

Reliability Analysis Of Separator Control Systems, D.P. Muxitdinov, O.U. Sattarov, M.Sh. Nematov

Chemical Technology, Control and Management

This article aims to enhance the reliability, efficiency, and diagnostic capabilities of gas-liquid separators operating in hazardous technological processes. In the study, the separator is considered as a critical functional unit of an industrial system and is analyzed through structural and functional decomposition. The main operating parameters of the separator, including pressure drop (ΔP), separation efficiency and operational state are described on the basis of a mathematical model. In addition, a state model is developed for normal operation, foaming, liquid droplet carryover with the gas flow, and failure conditions. Emphasis is placed on diagnostic and monitoring issues, …

Analysis Of Automatic Control Of The Channels And Ditches Cleaning Mechanism Based On Dynamic Indicators, Nasiba Siraj Amirbayova

Chemical Technology, Control and Management

The article deals with the automated design and experimental investigation of reinforced concrete irrigation channels and ditches, their interrelated channel-cleaning mechanisms, which are complex mechatronic systems integrating hydraulic, mechanical, and electronic components. A thorough methodology is suggested, hydrodynamic modeling, combining parametric analysis, and information-based design support to enhance channel concrete cover thickness, geometry, and cleaning system performance. Main structural parameters—involving channel depth, slope, bottom width, and concrete cover—are systematically defined and shown in matrix form to facilitate automated calculation and decision-making. Experimental prototypes and Solid Edge-based digital models are employed to verify the methodology, revealing vital interdependencies between structural parameters, …

Structural Decomposition-Based Control Synthesis For Multivariable Systems Using Oblique Projection Operators, Abdukaxxarov Inomjon Ilxom Ugli Mr, Oripjon Olimovich Zaripov, Jasur Usmonovich Sevinov

Chemical Technology, Control and Management

This paper proposes a novel approach to control synthesis for multivariable systems with algebraic constraints using oblique projection operators and their structural decomposition. The method transforms a standard control law into a structured form by decomposing the control input into constraint-satisfying and null-space components. A generalized oblique projector is constructed using a dual matrix, ensuring flexibility in shaping system properties. Furthermore, a recursive decomposition algorithm is developed, allowing the global projector to be represented as a sum of local operators corresponding to subsystem structures. The proposed framework enables modular control design, decoupling of interactions, and efficient implementation for large-scale systems. …

Conceptual Model For Protecting Personal Data By Depersonalization In Information Systems: Principles, Components, And Life Cycle, Zarina Ildarovna Azizova

Chemical Technology, Control and Management

This article presents a systematic approach to personal data protection through depersonalization in the context of regulatory pressure and growing cyber threats. It proposes a comprehensive conceptual model that formalizes the de-identification process as a manageable sequence of steps, from attribute classification and method selection to mandatory verification of the result. The article also provides a comparative analysis of existing depersonalization methods in terms of their applicability within the proposed model. The model serves as a basis for the development of specific algorithms, as demonstrated by the example of a data shuffling approach.

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Research Of Logic Elements Based On Complementary Bipolar Transistors, Nodira Batirdjanovna Alimova, Nilufar Baxtiyorovna Gulyamova

Chemical Technology, Control and Management

Important parameters for any type of inverter – a NOT logic gate – are the power consumption during switching and the supply voltage. The proposed connection of complementary (two different types) bipolar transistors reduces the current consumption and supply voltage by simultaneously using the cutoff and saturation modes of the bipolar transistors. It has been theoretically and experimentally established that an inverter using complementary bipolar transistors operates at low supply voltages, approximately 0.7 V. Power consumption is virtually independent of the inverter's static state. A method for calculating the transfer characteristic of an inverter using complementary bipolar transistors is developed, …

Algorithms Of Stable Adaptive Observation Of A Multidimensional Undefinite Object, Tursunova Sadoqat Abdusalom Qizi

Chemical Technology, Control and Management

This article presents an algorithm for simultaneously estimating the parameters and state coordinates of a multidimensional control object when some of its state variables are not directly measured. The inability to measure all state variables (coordinates) of an object is a well-known drawback of identification schemes. Such conditions require the construction of adaptive state observers. This work demonstrates that when identifying the parameters of a mathematical model for an uncertain multidimensional object, the asymptotic stability of the object and the convergence of its parameters to the model parameters are ensured, provided the input vector is sufficiently informative. The construction of …

Analysis Of The Carbonization Process Of Ammoniated Brine In Ammonia-Soda Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fotima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The work provides an analytical review of the current state of modeling and controlling the carbonization process of ammoniated brine. It analyzes modern methods of mathematical, simulation, and intelligent modeling of heat and mass transfer, hydrodynamics, carbonation kinetics, and crystallization. The paper considers the potential of using digital twins, neural network models, fuzzy logic devices, and hybrid models to improve forecasting accuracy and the adaptability of process solutions. Modern carbonation process control strategies are also considered. A detailed analysis is provided of predictive control (MPC), neuro-fuzzy controllers, decentralized and multivariate control systems that ensure stable column operation under disturbances, optimize …

Inductive Transducers For Measuring Vibrations, S.F. Amirov, A.Kh. Sulliev, A.A. Shoimkulov

Chemical Technology, Control and Management

A new design of an induction transducer has been developed for measuring linear and torsional vibrations in different directions with high sensitivity by constructing an inertial element consisting of four mutually perpendicular sectors and making the masses of two adjacent sectors different from the masses of the other two adjacent sectors. By constructing an inertial element in the form of a sector with two mutually diametric magnetic cores and different masses, and placing it between the horizontal and vertical axes, a design of an induction transducer has been developed that highly sensitively measures linear and torsional vibrations in different directions, …

The Main Errors Of The Ultrasonic Sensor In Measuring Water Flow In Open Channels, Anvar Urolovich Djalilov

Chemical Technology, Control and Management

This article analyzes the use of ultrasonic sensors in measuring water flow and the main errors that may occur in this process. In the conducted scientific research, a time-pulse ultrasonic sensor was tested. The absolute, relative and repeatability errors of the sensor during water flow measurement were studied. The absolute error represents the largest difference between the value recorded by the sensor and the real value, affecting the overall accuracy of the measurement system. This error can vary depending on environmental factors, the design and operating principles of the sensor. During the experiment, the performance of this sensor was …

Synthesis Of An Adaptive Synergistic Fuzzy Discrete Controller For Nonlinear Systems, Isamidin Xakimovich Sidikov, Gulruxsor Murot Qizi Nashvandova, Feruzakhon Botirxon Qizi Sodiqova

Chemical Technology, Control and Management

The paper considers the issues of synthesizing an adaptive fuzzy synergetic controller with discrete time for nonstationary nonlinear dynamic objects. The proposed approach is based on the integrated use of synergetic control principles and fuzzy logic methods, which ensure the formation of a control law for nonlinear dynamic objects that provides asymptotic stability of the control system. Such a hybrid combination makes it possible to guarantee the asymptotic stability of the closed-loop system and to shape the required dynamic behavior of the object over a wide range of operating modes. In addition, this approach provides the ability to adapt to …

Adaptive-Robust Control Of Dynamic Systems Using Generalized Predictive Methods, Shuxrat Tulyaganov

Chemical Technology, Control and Management

This paper considers an approach to adaptive-robust control of dynamic systems using generalized anticipation, where the object is described by a locally linearized model. Known self-tuning algorithms show insufficient stability to inaccurate selection of delay or model order. A generalized predictive control approach is suggested, with simulation outcomes showing superiority over traditional methods like generalized minimum variance control and pole assignment.This sliding horizon algorithm is based on predicting future system output signals several steps ahead, based on assumptions about subsequent control actions. One effective assumption is the presence of a “control horizon,” beyond which control signal increments are assumed to …

Review Of Modern Methods For Identification, Forecasting, And Intelligent Control Of Wastewater Biological Treatment Processes, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon O'G'Li Mannobjonov

Chemical Technology, Control and Management

This article presents a comprehensive review of contemporary approaches to the automation and intelligent control of wastewater biological treatment processes. Particular emphasis is placed on the digitalisation of wastewater treatment plants, ranging from the implementation of automated process control systems (APCS/SCADA-based solutions) to the application of predictive algorithms and the development of digital twins of bioreactors.

Special attention is devoted to mathematical models that underpin the control of bioprocesses. The evolution of the most widely used activated sludge models—ASM1, ASM2d, and ASM3—is examined, as these models describe key processes such as microbial community growth, nitrification, denitrification, and phosphorus removal. It …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Improvement Of Technology And Control And Management Systems Of The Plant Oil Refination Process, Elyor Samadov

Chemical Technology, Control and Management

The article examines modern approaches to modernizing vegetable oil refining processes from the perspective of increasing energy efficiency, environmental friendliness, and final product quality. Traditional and innovative technologies are analyzed, with a focus on the implementation of membrane filtration, automated control systems, heat exchange complexes, and renewable energy sources. It has been shown that the use of intelligent control systems, high-precision membrane filters, and heat regeneration allows for a 25% reduction in energy consumption, a 20% reduction in greenhouse gas emissions, and a significant improvement in acidity, color, and impurity content in the product. The obtained results show the effectiveness …

Analog Systems Of Physical Quantities And Their Graph Models In Determining The Parameters Of Mechatronic Modules, Temurbek Omonboevich Rakhimov, Elmira Eshmurod Qizi Raxmanova, Guzal Khujaniyazova

Chemical Technology, Control and Management

This article is dedicated to the analogy systems of physical quantities and their graph models in determining the parameters of mechatronic modules. It presents the general sets and fundamental laws of analogy systems of physical quantities and their elements for determining the parameters of mechatronic modules. Based on the general sets and fundamental laws of analogy systems of physical quantities and their elements, principles have been developed for mechatronic modules with a heterogeneous structure consisting of electrical, magnetic, and mechanical parts. In these modules, the field as a form of matter exists, forming the basis for developing mathematical models to …

Improving Self-Diagnostic Methods Of Flow Measurement Systems Based On Artificial Intelligence, Elbek Ortikov

Chemical Technology, Control and Management

The article examines methods for improving self-diagnostics of consumption measurement systems based on artificial intelligence in the context of industry digitalization and the development of cyber-physical systems. It has been shown that traditional flow meters used to measure the flow rate of liquids and gases are subject to mechanical, hydraulic, electronic, and hidden failures, which reduce the accuracy and reliability of measurements. A justification for the need to transition from classical maintenance methods to intelligent self-control methods that ensure the detection of anomalies and hidden malfunctions in real time is presented. A multi-level architecture of intelligent self-diagnosis is proposed, including …

Performance Assessment Of Operators Under Digital Simulator-Based Training In Automated Industrial Systems, Kamola Abdullaeva

Chemical Technology, Control and Management

This article proposes a comprehensive approach to training process operators, based on computer simulators integrated with digital twins, SCADA/DCS systems, real production data, and artificial intelligence algorithms. This approach is particularly relevant given the increased requirements for safety, productivity, and reliability of industrial facilities, as human factors are often the main cause of accidents (up to 60-80% of cases). The architecture of the simulator complex is designed to accurately emulate steady-state, transient, and pre-emergency operating modes of equipment, which are not achievable under actual production conditions. The experiment compared the training effectiveness of two groups of operators: one that used …