Chemical Engineering Commons^™

Determination Of Electrochemical Parameters For Predicting Reaction Mechanism And Algorithmic Approaches To Pain Assessment, Huize Xue

Dissertations

This dissertation introduces novel advancements in electrochemical kinetics and pain assessment, structured into two main parts. The first part focuses on the comprehensive analysis of the kinetic and mechanistic aspects of electrochemical reactions, utilizing a combination of experimental techniques and simulation methods. A new software tool, Envismetrics, was developed using Python to facilitate the analysis of complex electrochemical data, including cyclic voltammetry (CV), chronoamperometry (CA), and hydrodynamic voltammetry (HDV). The software was rigorously tested and validated with well-characterized redox systems such as the ferricyanide/ferrocyanide couple, dimethylamine borane (DMAB), and Per- and Polyfluoroalkyl Substances (PFAS). It was successfully used to determine …

Gas-Generating Reactive Materials: Design, Evaluation And Effect Of Morphology On Their Ignition And Combustion, Purvam Mehulkumar Gandhi

Dissertations

This work investigates optimizing gas-generating reactive materials, focusing on particle morphology's effect on ignition and combustion behavior. Metal-based gas-generating energetic materials (EMs) are promising alternatives to replace traditional CHNO compounds. Design of advanced metal-based EMs requires consistent ways of evaluating how their characteristics affect their ignition and combustion. Many relevant evaluation approaches exist; however, the results may be difficult to compare directly across different studies. Commonly, experimentalists ignite metal-based EMs in enclosed chambers and report pressures, P. However, direct comparison of these pressures is hindered by variations in the chamber volume, V, and the EM mass, m. To standardize the …

Decomposition Of Diisopropyl Methylphosphonate (Dimp) Exposed To Elevated Temperatures And Combustion Products Of Reactive Materials, Elif Irem Senyurt

Dissertations

The safe and efficient destruction of chemical weapon agents (CWAs) stockpiles remains a critical global challenge. Understanding the thermophysical properties, decomposition mechanisms, and interactions of CWAs with their environment is crucial for developing effective strategies to mitigate their threats. Diisopropyl methylphosphonate (DIMP) and Dimethyl methylphosphonate are commonly used nerve agent surrogates. This dissertation focuses on DIMP and DMMP, investigates their properties and behavior under conditions relevant to prompt defeat scenarios.

The thermophysical properties of DIMP and DMMP were experimentally characterized, including vapor-liquid surface tension (3-60 °C) and viscosities of neat and aqueous solutions. Results revealed significant non-ideal behavior in aqueous …

Development Of A Spray Pipe Evaporator For Application On Unproductive Salt Farm Land In Indonesia, Srie Muljani, Ketut Sumada, Alfian Rizki Pradana, Caecilia Pujiastuti

ASEAN Journal of Community Engagement

This article discusses the development of a prototype spray pipe evaporator and its efficiency in producing salt in Indonesia. Due to the length of the salt harvesting season in Indonesia, many salt farmers have closed their business doors, leaving many salt ponds abandoned. The spray pipe evaporator prototype was designed to produce a brine solution with a salinity of 23–24 Be from seawater, which has a salinity of 2.5–3.5 Be, in less than 3 days. This is faster than the conventional process of a brine solution salinity of 24 Be. The prototype spray pipe evaporator was assessed in a 20 …

Black Soldier Fly Larvae (Bsfl) Bioconversion For Circular Economy: A Study In Polaman Village, Siswo Sumardiono, Rizka Amalia, Syaikha Butsaina Dhiya’Ulhaq, Nurika Nazilatul Ilmi, Hermawan Dwi Ariyanto

ASEAN Journal of Community Engagement

Conventional organic waste management methods often lead to environmental degradation and underutilization of valuable resources. In rural areas, such as Polaman Village, limited awareness and inefficient disposal systems exacerbate these issues, thus necessitating innovative and sustainable solutions. This study explores black soldier fly larvae (BSFL) bioconversion as a community-based solution for organic waste management, addresses environmental challenges, and promotes economic empowerment by converting waste into valuable by-products. The study employed a mixed-methods approach, beginning with baseline assessments of waste generation and existing management practices to identify community needs. Educational workshops and hands-on training sessions introduced BSFL bioconversion techniques to local …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Strategic Site Selection For Bio-Lng Plant In Indonesia: A Multi-Criteria Scoring Method Approach, Edma Nadhif Oktariani, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

In Indonesia, the energy sector is still predominantly reliant on fossil fuels, with renewable energy, including liquefied biomethane (Bio-LNG), playing a limited role. Nonetheless, Indonesia has significant potential for Bio-LNG development due to its abundant organic waste resources such as Palm Oil Mill Effluent (POME) from palm oil mills. Having approximately 891 Palm Oil Mills in Indonesia and being spread mostly in Sumatra, this study aims to select a strategic location for a Bio-LNG plant that can enhance logistical efficiency and economic viability for the plant. This study uses Multi-Criteria Decision Making (MCDM) methodologies to assess potential sites based on …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Synergic Efficiency Of Organophosphonates In The Synthesis And Corrosion Inhibition Of Zinc Complexonates, Shoyunus Botir Ugli Obidov, Xusniddin Nurboboyevich Raximov, Xasan Irgashevich Kadirov, Satridin Maxamatdinovich Turabdjanov

Technical science and innovation

In this article, the processes of metal complex synthesis are studied in detail. Zinc OEDF+NTF complexation reactions were carried out in the presence of polyhydric alcohols, ethylene glycol, glycerol, and citric acid. For the first time, the synergistic efficiency of a mixture of zinc OEDF+NTF complexes with methyldiethanolamine, used as an inhibitor of mineral salt accumulation, was studied. It was found that when selecting the components in equivalent amounts, the inhibition efficiency of the composition is at least 90%. The high efficiency of inhibiting mineral salt accumulation in the composition is due to the presence of methyldiethanolamine, alkylimidazoline, and their …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Enriched Microbial Consortia From Natural Environments Reveal Core Groups Of Microbial Taxa Able To Degrade Terephthalate And Terphthalamide, Laura G. Schaerer, Sulihat Aloba, Emily Wood, Allison Olson, Isabel B. A. Valencia, Rebecca Ong, Stephen Techtmann

Michigan Tech Publications

Millions of tons of polyethylene terephthalate (PET) are produced each year, however only ~30% of PET is currently recycled in the United States. Improvement of PET recycling and upcycling practices is an area of ongoing research. One method for PET upcycling is chemical depolymerization (through hydrolysis or aminolysis) into aromatic monomers and subsequent biodegradation. Hydrolysis depolymerizes PET into terephthalate, while aminolysis yields terephthalamide. Aminolysis, which is catalyzed with strong bases, yields products with high osmolality, which is inhibitory to optimal microbial growth. Additionally, terephthalamide, may be antimicrobial and its biodegradability is presently unknown. In this study, microbial communities were enriched …

Influence Of Fused Deposition Modeling Process Parameters On The Constitutive Model Of Hyperelastic Thermoplastic Polyurethane, Lucas Gallup, Mohamed Trabia, Brendan O'Toole, Youssef Fahmy

Mechanical Engineering Faculty Research

Thermoplastic polyurethanes (TPUs) are suited for fused deposition modeling (FDM) of parts that require high levels of flexibility and strength. Predicting the deformation of TPU parts produced using FDM may be difficult, especially under large deformations, as their constitutive models depend on the printing process parameters. The lack of understanding led to the absence of constitutive models for TPU parts produced using FDM. This work aims to identify accurate hyperelastic constitutive models. Six groups of uniaxial tensile specimens were produced using FDM. These groups were made with variations in two process parameters, which were infill geometry and extrusion nozzle temperature. …

Determination Of The Kinetic Parameters Of Cholesterol Oxidation Using Cholesterol Oxidase From Streptomyces Sp., Meka Saima Perdani, Heri Hermansyah, Muhamad Sahlan, Dwini Normayulisa Putri, Teguh Pambudi, Anggi Khairina Hanum Hasibuan

Makara Journal of Technology

Cholesterol oxidase (CO) was successfully produced from Streptomyces sp. via the submerged fermentation method, and 69 U/mL enzyme activity was obtained. This study aimed to determine cholesterol oxidation kinetics and the production of CO as a catalyst. The enzyme was diluted to 0.15, 0.075, and 0.00375 U/mL for the oxidation reaction. The substrate was also prepared in three concentrations: 3.23, 6.46, and 12.93 mM. The optimization of conditions for enzymatic cholesterol oxidation was investigated through measurement of the effect of initial cholesterol and enzyme concentrations. Cholesterol concentration was rapidly measured via high-performance liquid chromatography (HPLC). The kinetics of CO were …

Physics-Informed Heterogeneous Spatiotemporal Graph Neural Network For Reservoir Simulation, Ahmed A.M.A. Abdullah

LSU Master's Theses

Reservoir simulation is the state-of-the-art method for predicting the flow of petroleum reservoir fluids in porous media. It provides an accurate and unbiased prediction of the performance of petroleum reservoirs under different operating conditions. Despite its advantages, reservoir simulation is computationally expensive; with typical full-field simulation models running for several hours. This limitation is worsened when simulating reservoirs with several equations for each cell, such as multiphysics or compositional reservoir simulation. The goal of this research is to provide a fast and accurate spatiotemporal machine-learning model that incorporates discretized governing mass balance equations for training. To achieve this, we propose …

Investigating Catalytic Conversion Of Lignin To Valuable Products, Jialiang Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Lignin is a complex, random, and heterogeneous biopolymer in lignocellulosic biomass. It has significant potential for conversion into valuable chemicals and fuels. However, its natural recalcitrant structure has made selective depolymerization challenging. This dissertation presents a detailed investigation into the mechanisms of lignin disassembly and structural evolution under various catalytic and solvent conditions. The research spans three key studies. In Chapter 2, operando magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectroscopy was employed to study reaction pathways and kinetics of lignin model polymers during catalytic hydrogenolysis. We used a Ni-Al2O3 catalyst in methanol under high temperature and pressure, and …

Investigating Catalytic Conversion Of Lignin To Valuable Products, Jialiang Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Lignin is a complex, random, and heterogeneous biopolymer in lignocellulosic biomass. It has significant potential for conversion into valuable chemicals and fuels. However, its natural recalcitrant structure has made selective depolymerization challenging. This dissertation presents a detailed investigation into the mechanisms of lignin disassembly and structural evolution under various catalytic and solvent conditions. The research spans three key studies. In Chapter 2, operando magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectroscopy was employed to study reaction pathways and kinetics of lignin model polymers during catalytic hydrogenolysis. We used a Ni-Al2O3 catalyst in methanol under high temperature and pressure, and …

Capacity Of Self Compact Concrete Walls Using Attapulgite As A Partial Replacement Of Cement Under One Way And Two Way Action Restriction, Wissam Kadhim Alsaraj, Luma Abdul Ghani Zghair, Akhlas Hashem Mohammed

Al-Esraa University College Journal for Engineering Sciences

This investigation about the structural performance of sustainable self-compact concrete walls exposed to eccentric axial regularly dispersed loading, including the effect of aspect ratio (AR) and slenderness ratio (λ) by one-way and two-way action. The experimental program includes testing ten wall panels, the eccentricity of the loading system equivalent to one-sixth of depth. These wall panels are separated into four groups, each one consisting of three specimens. first and second groups clarify the aspect ratio (H/L) effect. The results indicated for decreasing AR from (0.75 to 0.625), (0.625 to 0.5), and (0.75 to 0.5), the increase of final load is …

Exploring The Benefits Of Feature Selection Based On Bat Algorithm And Deep Learning In Brain Cancer Diagnosis, Noor Fawzi Shafiq

Al-Esraa University College Journal for Engineering Sciences

Brain cancer is considered one of the most dangerous types that must be treated as soon as possible. Therefore, it is necessary to detect brain cancer in its early stages to enhance the diagnosis of the condition. This study proposes to combine the bat algorithm (BA) with deep learning methods to identify and classify brain tumors in medical images accurately.

In this paper, the bat algorithm was used to select distinctive features from the input brain images. The Bat Algorithm (BA) is a metaheuristic optimization algorithm that mimics the echolocation behavior of bats. It efficiently explores the feature space to …

Unveiling The Hidden Threat: How Wireless Networks Fuel Serious Cyber Attacks, Ibtesam Jomaa Hawi

Al-Esraa University College Journal for Engineering Sciences

The spread of wireless networks has led to an increase in serious cyber attacks due to their weak architecture. This article focuses on reevaluating cybersecurity in wireless network technology by integrating statistical information detection methods and artificial intelligence (AI) algorithms. To construct a wireless networking scenario that accurately reflects real-life conditions, we created a data fabrication that included four pre-existing anomalies as well as four newly introduced anomalies. The synthetic dataset created from these generation processes contains 20 thousand distinguishable values, which are later divided into training and validation sets. Using the strategy described before, we began to analyze the …

A Study On Improving The Accuracy And Effectiveness Of Similarity Detection Processes In Text Files Using Nlp Techniques, Noor Abdulmuttaleb Jaafar

Al-Esraa University College Journal for Engineering Sciences

The rapid expansion of the Internet has revolutionized access to information, especially in the area of unstructured data, most of which consists of textual content. While instant access to information brings many advantages, it has also given rise to a prevalent problem – plagiarism. Copying and reusing materials without proper permission poses a significant threat to academic integrity and integrity. Rates of plagiarism, especially in academic and scientific publications, have risen with the advent of the Internet, reaching alarming levels, such as 60% in student projects. This study examines the proposed model that includes computation of similarity using cosine coefficients, …

An Intelligent System Using Deep Learning For Healthcare Monitoring In Light Of The Covid-19 And Future Pandemics Based On Iot, Sara Salman Qasim, Rajaa J. Khanjar, Jamal Nasir Hasoon, Baesher Abdullateff Abad, Ali Hussein Fadil, Shajan.M. Alsowaidi

Al-Esraa University College Journal for Engineering Sciences

Recently, the Internet of Things has become a compelling research field as a new topic of research in various disciplines, particularly in the field of healthcare, because the Internet of Things is rebuilding modern healthcare systems by integrating technology, economics, and social perspectives. The development of healthcare systems from traditional to more personalized systems in which patients can be easily diagnosed, monitored and treated and many people can be helped. People are treated and cared for remotely and this is what some people need in the crisis the world has been through like COVID-19. This epidemic is caused by the …

Speech Coding Based On A Hybrid Approach: Dct, Huffman And Run-Length Coding, Sundos Abdulameer Alazawi, Esraa Jaffar Baker, Shahbaa Mohammed Abdulmaged

Al-Esraa University College Journal for Engineering Sciences

The exponential expansion of data in the digital world necessitates the development of effective methods for data transmission and storage. Data compression (DC) strategies are suggested to reduce the quantity of data stored or conveyed due to constrained resources. As a result of DC ideas' ability to efficiently use existing storage space and transmission capacity, different methods have been developed in various areas. Speech coding is a lossy method of coding; therefore, the output signal differs slightly from the input signal. Speech coding is useful for message encryption, communication over long distances and speech quality. In the fields of digital …

The Evolution Of The University Of Al-Anbar Urban Planning Based On The Mental Picture's Diversity And The Contemporary Planning Spaces Filling, Ali Abdulsamea Hameed

Al-Esraa University College Journal for Engineering Sciences

This research concentrated on the role of environmental graphic design (EGD) and the place-making idea in the interior environment of Al-Anbar University. To develop an identity being visual for the University of Al-Anbar internal environment (IE) is this goal of project. The search sought to create and enhance the shape of the internal University of Al-Anbar vacuum by reviving the idea of place building. In order to build and filling the internal emptiness of the campus, the identity being visual must also be strengthened. The descriptive analytical approach was chosen since it was best suited to achieve the goal of …

Studies On The Synthesis, Reactivity, And Stability Of Au Nanoparticles In Ts-1 Zeolites For Propylene Epoxidation Within H2/O2 Mixtures, Weixin Li

Dissertations - ALL

The increasing global demand for energy and materials has highlighted the importance of efficient production of chemical intermediates like propylene oxide (PO), a key compound in manufacturing polyurethanes, propylene glycol, and other industrial products. Traditional methods, such as the chlorohydrin process and organic peroxide methods, pose environmental and economic challenges due to hazardous by-products and complex processes. The need for greener alternatives led to the exploration of gold (Au) catalysts for the direct catalytic epoxidation of propylene using hydrogen (H2) and oxygen (O2). This research focused on understanding the propylene epoxidation process over Au catalysts, specifically Au nanoparticles (AuNPs) supported …

Thermodynamics And Shear Flow Dynamics Of Block Copolymer Morphologies In Solution, Senyuan Liu

Dissertations - ALL

Block copolymers (BCPs) have been a focal point of research for several decades. They have been engineered to produce various morphologies by altering the combinations of chemically distinct polymer segments that interact selectively with their environment, such as in aqueous or organic solvents, or within a polymer matrix. The ability to tailor morphological features by manipulating polymer chain length, composition, and monomer chemistry has led to applications in advanced material manufacturing, catalysis, emulsification, environmental remediation, targeted drug delivery, gene therapy, and medical diagnostics. Consequently, understanding the relationship between copolymer architecture and the self-assembled morphologies at equilibrium, the pathways of structure …

Beyond The Surface: Understanding Temperature Polarisation In Dcmd Membranes Through Varied Operational Parameters, Hiras Ahamed Hijaz, Masoumeh Zargar, Abdellah Shafieian, Amir Razmjou, Mehdi Khiadani

Research outputs 2022 to 2026

Conventionally, a single Temperature Polarisation Coefficient (TPC) value is calculated to quantify Temperature Polarisation (TP). In this research, the extent of polarisation is investigated by capturing temperature profiles at specific points along a MD membrane using miniature thermocouples, eliminating the need for TPC calculations. The extent of polarisation at a point is affected by two contributory factors, namely the proximity of flow inlets and the difference in vapour pressure across the membrane at that point. Under this direction, this work examined the influence of permeate temperature, feed salinity, and flow direction on the development of the temperature profiles. Our analysis …

Kinetics Model Of Cananga (Cananga Odorata) Fresh Flower Extraction Using Microwave Hydrodistillation Method, Darnengsih Darnengsih, Hikmatun Ni’Mah, Mahfud Mahfud, Ayu Chandra Kartika Fitri

Makara Journal of Science

Recent studies have focused on improving essential oil extraction methods by incorporating advanced technologies, such as microwave-assisted hydrodistillation (MHD). Despite these advancements, further research is necessary to fully understand how different kinetic models influence extraction efficiency. This study evaluates several kinetic models for extracting essential oil from fresh Cananga flowers using MHD, examining how varying microwave power affects extraction rates and correlates with kinetic model parameters. The extraction process involved introducing 200 grams of fresh Cananga flowers in 400 mL of distilled water and subjecting the mixture to microwave power levels of 200 W, 400 W, and 600 W. The …