Chemical Engineering Commons^™

Development Of Novel Inks And Approaches For Printing Tissues And Organs, Shen Ji

Dissertations

Tissue engineering is a multidisciplinary field that investigates and develops new methods to repair, regenerate and replace damaged tissues and organs, or to develop biomaterial platforms as in vitro models. Tissue engineering approaches require the fabrication of scaffolds using biomaterials or fabrication of living tissues using cells. As the demands of customized, implantable tissue/organs are increasing and becoming more urgent, conventional scaffold fabrication approaches are difficult to meet the requirements, especially for complex large-scale tissue fabrication. In this regard, three-dimensional (3D) printing attracted more interest over the past decades due to its unrivaled ability to fabricate highly customized tissues or …

The Aging And Impacts Of Atmospheric Soot: Closing The Gap Between Experiments And Models, Ogochukwu Yvonne Enekwizu

Dissertations

The main goal of this dissertation is to generate data and parameterizations to accurately represent soot aerosols in atmospheric models. Soot from incomplete combustion of fossil fuels and biomass burning is a major air pollutant and a significant contributor to climate warming. The environmental impacts of soot are strongly dependent on the particle morphology and mixing state, which evolve continuously during atmospheric transport via a process known as aging. To make predictions of soot impacts on the environment, most atmospheric models adopt simplifications of particle structure and mixing state, which lead to substantial uncertainties. Using an experimentally constrained modeling approach, …

Modeling Mass Transfer And Chemical Reaction In Industrial Nitrocellulose Manufacturing Processes, Francis Patrick Sullivan

Dissertations

A series of models are proposed to describe the production of military grade nitrocellulose from dense cellulose materials in mixtures of nitric acid, sulfuric acid, and water. This effort is conducted to provide a predictive capability for analyzing the rate and extent of reaction achieved under a range of reaction conditions used in the industrial nitrocellulose manufacturing process for sheeted cellulose materials. Because this capability does not presently exist, nitrocellulose producers have historically relied on a very narrow range of cellulose raw materials and resorted to trial and error methods to develop processing conditions for new materials. This tool enables …

Development Of Novel Membranes For Nanocarbon Enhanced Separation With Application In Biofuels And Solvent Recover, Oindrila Gupta

Dissertations

Pharmaceutical industries historically have had one of the highest amounts of solvent waste generated per unit of drug manufactured. Energy requirements and carbon footprint of current solvent recycling processes tend to be quite high, and the incineration of the solvents for waste disposal produces toxic air emissions. Also, rapidly increasing demand for energy and strict regulation on engine pollutant emissions have necessitated the use of alcohol as carbon-neutral fuels. Thermal distillation is one of the most common methods for the separation of alcohol-water mixtures. However, its application is limited due to energy requirements and high operating costs, and heating to …

Predicting Bulk-Scale Properties Of Pharmaceutical Powders From Their Particle-Scale Dimensionless Measures, Kuriakose T. Kunnath

Dissertations

Loose powder packing and flowability are both important bulk properties to consider in relation to pharmaceutical tablet and capsule manufacturing. These properties as well as cohesive powder agglomeration tendency impact the efficiency of various processes such as feeding, blending, conveying, and compaction, and could have an adverse effect on final drug product. Pharmaceutical powders are often milled to fine sizes (<100 gm) for dissolution improvements via increased available surface area. However, such particle size reductions lead to inadequate bulk powder properties due to high cohesion among the individual particles. Recent work has demonstrated the ability of nano-silica dry coating techniques to significantly decrease interparticle forces without changes in particle size. In this work, the ability to predict properties such as powder bed porosity, flowability, and particle agglomeration both before and after nano-silica dry coating is examined, along with assessment of the extent of property enhancements after dry coating. Previous studies have utilized empirical approaches to build property prediction models. However, such approaches lack physical fundamentals which dictate bulk powder behavior and would be unable to account for the effects of dry powder coating. Incorporation of physics can be done via computation of the granular Bond number, as is done in this study for a large dataset of commonly used pharmaceutical powders, with wide variations in particle size, shape, density, and surface roughness. Predictive capability of current Bond number models is investigated, reasons for outliers are elucidated, and amendments to improve prediction is attempted. Overall, the aim of this work is to expand generalizability of Bond number models to a wider variety of particles, and extend its use from single powders to multi-component mixtures. The major outcome of this work is the development of a predictive framework that is expected to simplify pharmaceutical dry powder formulation development, reduce required experimental testing, and provide quantifiable estimates to aid processing route decision making.

Preparation And Characterization Of Reactive Composites Combining Boron With Mixed Oxides, Purvam Mehulkumar Gandhi

Theses

Thirteen liquids have been explored as Process Control Agents (PCAs) for high-energy mechanical milling of two metal oxide powders, CuO and Bi₂O₃, with the practical purpose to reduce the sizes of powder particles and refine their crystal structure. Multiple liquid properties have been considered to analyze their effect on evolution of both particle and crystallite sizes during milling for each oxide. Experimental data were analyzed using the δ-AICc (Akaike Information criterion) correlation function applied to linear relations between liquid properties and powder characteristics. Multiple linear correlation models were ranked based on the highest log-likelihood and the …

Effects Of Calcination Temperature Of Naturally Occurring Absorbents On Drinking Water Defluoridation, Brenda Mndolwa

Tanzania Journal of Engineering and Technology (TJET)

Currently, in Tanzania, fluoride removal from drinking water is treated mostly using the bone char method. The method has poor acceptability in some religious communities and also causes water quality deterioration in taste and odour if the bones are not properly prepared. The use of local natural adsorbents as an alternative is feasible with limitations of high levels of other impurities in treated water. Locally available gypsum, magnesite and bauxite were converted to adsorbents through calcination. The study was conducted to determine the removal efficiency, best calcination temperature and composite ratio of the three adsorbents for the removal of fluoride …

Fermentability Of Concentrated Sulfuric Acid Hydrolyzates From Aspenwood And Pinewood, Kando Janga

Tanzania Journal of Engineering and Technology (TJET)

The fermentability of hydrolyzates derived from two-stage concentrated sulfuric acid hydrolysis of Trembling aspen (Populus tremula) and Scots pine (Pinus sylvestris) were investigated. Three types of hydrolyzates were produced at mild, moderate and high decrystallization severity conditions. Portions of each of the original hydrolyzates were concentrated by vacuum evaporation to increase the sugar fraction to simulate industrial applications. Both sets of hydrolyzates were fermented anaerobically using Saccharomyces cerevisiae ATCC 96581. After 23 hours of fermentation, complete glucose consumption was observed for all the original hydrolyzates, with no signs of inhibition. The ethanol yields from these hydrolyzates ranged from 68% to …

Optimal Conditions Of Fermentation Of The Pichia Pastoris Yeast Expressing The Recombinant Pres2-S Protein (M-Hbsag) Of Hepatitis B Virus (Hbv), Sasmakоv Sobirdjan, Ashirоv Оybek, Abdurakhmanоv Jaloliddin, Xasanоv Shuhrat

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this study is determination of optimal fermentation conditions of the Pichia pastoris yeast expressing the recombinant Pres2-S protein of hepatitis B virus (HBV). For this purpose we investigated the main factors influencing for the cultivation of recombinant strain of the yeast Pichia pastoris pPIC3,5-S-HBsAg - the composition of the nutrient medium, pH and dissolved oxygen (DO). As a result, by enzyme-linked immunosorbent assay (ELISA) the optimal concentration of methanol ≈1.0 %, which is the initiator and the only source of carbon for protein expression in the Mut+ phenotype Pichia pastoris yeast cells was determined. In the selected …

Waste Engine Oil Regeneration With Bentonite From The Navbahor Deposit, Azimova Shodiyakhon, Arslanov Sharafutdin, Turakhujayev Saidakbar, Azimov Dilmurod

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study was the regeneration of used oils. The change in the conditions for the regeneration of used engine oil as a result of adsorptive cleaning with alkaline earth clay from the Navbakhor deposit has been studied. The carried-out regeneration allows almost completely removing mechanical impurities, moisture from the waste oil and helps to clarify it. The optimal conditions for regeneration have been established. The removal of secondary products formed during the use of engine oil while retaining the main components that determine the serviceability of the product has been established. By means of IR spectroscopy, as …

Mixed Complex Compounds Of Palmitate, Oleate Calcium With Acetamide, Nicotinamide And Thiocarbamide, Ibadullaeva Tursunoy, Azizov Tokhir, Ibragimova Мavluda

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of the study was the synthesis and study of the structure of mixed complexes of palmitate, calcium oleate with acetamide, nicotinamide and thiocarbamide. The mixed coordination compounds of palmitate and calcium oleate were synthesized. The composition, individuality, thermal behavior, methods of coordinating the palmitate and oleate fragments, acetamide, nicotinamide and thiocarbamide molecules have been established. Comparison of the diffraction patterns of calcium palmitate and oleate, free ligand molecules and synthesized compounds showed the mismatch of the diffractograms, conseqently that the synthesized complexes have an individual crystal lattice different from the starting materials. The method of coordination of amide …

Synthesis Of Esters Of Halogenoacetic Acids, Yuldasheva Muxabbat, Turaev Sherzod

CHEMISTRY AND CHEMICAL ENGINEERING

Amidoalkylating reagents containing a phthalimide group are used in the synthesis of hard-to-reach primary amines and complex heterocyclic compounds. These types of amidoalkylating compounds are suitable reagents for nucleophilic substituted reactions in acidic media due to their resistance to acids. Result of reactions of amidoalkylating reagents-N-hydroxyethylphthalimide and N-hydroxymethylphthalimide with aliphatic carbonic acids can also produce new bactericidal and fungicidal esters. In this study, halogen acids reacted with N-hydroxymethylphthalimide monochloric acetic acid, monobromic acetic acid, monoiodic acetic acid, trifluoric acetic acid and trichloroacetic acid, as well as, N-b-hydroxyethylphthaleidyl monohydric acid. As a result of the reactions, new phthalimidomethyl and phthalimidoethyl esters …

Carbon Nanotube–Liposome Complexes In Hydrogels For Controlled Drug Delivery Via Near-Infrared Laser Stimulation, S. Zahra M. Madani, Mohammad Moein Safaee, Mitchell Gravely, Carolynn Silva, Stephen Kennedy, Geoffrey D. Bothun, Daniel E. Roxbury

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Externally controllable drug delivery systems are crucial for a variety of biological applications where the dosage and timing of drug delivery need to be adjusted based on disease diagnosis and progression. Here, we have developed an externally controllable drug delivery system by combining three extensively used platforms: hydrogels, liposomes, and single-walled carbon nanotubes (SWCNTs). We have developed carbon nanotube–liposome complexes (CLCs) and incorporated these structures into a 3D alginate hydrogel for use as an optically controlled drug delivery system. The CLC structures were characterized by using a variety of imaging and spectroscopic techniques, and an optimal SWCNT/lipid ratio was selected. …

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song

Journal of Electrochemistry

Water electrolysis for hydrogen production is beneficial for solving the problem of energy crisis and environmental issues. It is necessary to study highly active and cost-effective catalysts toward hydrogen evolution reaction (HER) to reduce the consumption of noble metals. Herein, we report the synthesis of core-shell structured Ru@Pt_0.24Ru nanoflowers electrocatalyst by stepwise reduction of Ru and Pt precursors in the mixture of oleylamine and benzyl alcohol at 160 ^oC. The average diameter of the resultant Ru@Pt_0.24Ru was 16.5±4.0 nm with a bulk atomic ratio between Pt and Ru of 0.24:1 and a surface ratio of …

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun

Journal of Electrochemistry

Electrochemical conversion of carbon dioxide (CO₂) driven by renewable electricity that can meet both carbon emission reduction and renewable energy utilization has been rapidly developed in recent years. Copper (Cu) catalyst has long been a promising candidate for CO₂ electroreduction applications because of its natural abundance and specific capability of producing a substantial amount of C2 products. However, various metallic Cu electrodes reported have been significantly influenced by the adsorption of certain cation/anion ions, resulting in wide-span catalytic activities and selectivity for various products. In addition, a recent report demonstrated that by virtue of gas-diffusion flow cell …

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a high-efficient clean conversion device for future energy management. Because of the low antioxidant reduction ability and complex thermal stress, the structure of traditional asymmetrical thin anode-supported planar SOFC is easily to be broken under stack operating conditions. To overcome these defects, a new complete symmetrical SOFC based on double-sided cathodes was developed. To study the influences of gas flow direction and current collection mode on the cell performance inside stack, a numerical model was established by finite element method based on the theory of electro-thermo-chemo multiphysical coupling. By applying this model, the molar …

Reduction Of Copper And Iron Oxide Mixture With Local Reducing Gases, Shokhrukh Khojiev

Acta of Turin Polytechnic University in Tashkent

The article analyzes the scientific problems of the copper industry. In particular, the main problem with the classical production of copper is the causes of large amounts of slag and the negative impact of these wastes on the environment. Accordingly, the main component that forms the slag is iron, and the higher its content in the original copper concentrate, the more slag is formed, and at the same time a large amount of copper metal is released into the waste. The departure is indicated by evidence. To prevent this problem, a technology has been proposed to reduce copper sulfide concentrates …

Effect Of Microcapsule Content On Diels-Alder Room Temperature Self-Healing Thermosets., Sadella C Santos, John J La Scala, Giuseppe R Palmese

Henry M. Rowan College of Engineering Departmental Research

A furan functionalized epoxy-amine thermoset with an embedded microcapsule healing system that utilizes reversible Diels-Alder healing chemistry was used to investigate the influence of microcapsule loading on healing efficiency. A urea-formaldehyde encapsulation technique was used to create capsules with an average diameter of 150 µm that were filled with a reactive solution of bismaleimide in phenyl acetate. It was found that optimum healing of the thermoset occurred at 10 wt% microcapsule content for the compositions investigated. The diffusion of solvent through the crack interface and within fractured samples was investigated using analytical diffusion models. The decrease in healing efficiency at …

Effect Of Surfactant Addition On The Dispersion And Antioxidant Performance Of Pyrogallol In Biodiesel, Silvya Yusri, Mohammad Nasikin, Hery Sutanto

Makara Journal of Science

Biodiesel is one of the most feasible energy sources that can be used as a replacement for fossil fuel. Biodiesel has several advantages over conventional fuels because of its availability, renewability, and high combustion efficiency. However, biodiesel that contains unsaturated fatty acid methyl esters is prone to oxidation during the blending process and storage period. The complete oxidation reaction of biodiesel produces insoluble gums that could potentially plug the fuel engines. This reaction has become the main barrier for biodiesel to compete with other biofuels. Among several methods, the addition of antioxidants is the most cost-effective method to prevent the …

Detection Of Nucleotides In Hydrated Ssdna Via 2-D H-Bn Nanopore With Ionic-Liquid/Salt-Water Interface, Jungsoo Lee

Multidisciplinary Studies Theses and Dissertations

Accomplishing slow translocation speed with high sensitivity has been the greatest mission for solid-state nanopore (SSN) to electrically detect nucleobases in single-stranded DNA (ssDNA). In this study, a method to detect nucleobases in ssDNA using a SSN is introduced by considerably slowing down the translocation speed and effectively increasing its sensitivity. The ultra-thin titanium dioxide (TiO₂) coated hexagonal boron nitride (h-BN) nanopore was fabricated, along with an ionic-liquid [bmim][PF₆]/2.0 M KCl aqueous (cis/trans) interfacial system, to increase both the spatial and the temporal resolutions. As the ssDNA molecules entered the nanopore, a …

Modeling Residence Time Distribution Of Chromatographic Perfusion Resin For Large Biopharmaceutical Molecules: A Computational Fluid Dynamic Study, Kevin Vehar

KGI Theses and Dissertations

The need for production processes of large biotherapeutic particles, such as virus-based particles and extracellular vesicles, has risen due to increased demand in the development of vaccinations, gene therapies, and cancer treatments. Liquid chromatography plays a significant role in the purification process and is routinely used with therapeutic protein production. However, performance with larger macromolecules is often inconsistent, and parameter estimation for process development can be extremely time- and resource-intensive. This thesis aimed to utilize advances in computational fluid dynamic (CFD) modeling to generate a first-principle model of the chromatographic process while minimizing model parameter estimation's physical resource demand. Specifically, …

Use Of Food Waste Activated Carbons For Wastewater Treatment, Abigale Monasterial

Honors Scholar Theses

Activated carbons are often used to remove phenol from wastewater. However, they are usually derived from expendable resources, such as coal and have high regeneration costs. In this work, the adsorption of phenol on activated carbon derived from food waste was studied to understand its kinetics, determine its maximum adsorption capacity, and compare it to commercial activated carbons. Adsorption experiments were performed at 298 K for 48 hours at various pHs and initial phenol concentrations. The adsorption data was then fit to the pseudo-first order, pseudo-second order, and intraparticle diffusion models to understand the kinetics and to the Langmuir and …

Copper Electrodeposition In Full Wafer Thickness Through-Silicon Vias, Rebecca P. Schmitt

Chemical and Biological Engineering ETDs

Through-silicon vias (TSVs) are a key interconnect technology for advanced packaging of microelectronic devices, and full wafer thickness TSVs are required for certain microelectromechanical systems (MEMS) applications. In this work, electrolytes containing copper sulfate, an acid, chloride, and Tetronic 701 suppressor were implemented for Cu filling of high aspect ratio (10:1), full wafer thickness TSVs. For each electrolyte system, rotating disk electrode voltammetry was used to identify a voltage range for bottom-up Cu filling in the TSVs. Die level feature filling was performed using voltage ramping, which moved active deposition through the vias to yield void-free Cu features. During voltage-controlled …

Pressure-Induced Formation And Mechanical Properties Of 2d Diamond Boron Nitride, Filippo Cellini, Francesco Lavini, Elton Chen, Angelo Bongiorno, Filip Popovic, Ryan L. Hartman, Remi Dingreville, Elisa Riedo

Publications and Research

Understanding phase transformations in 2D materials can unlock unprecedented developments in nanotechnology, since their unique properties can be dramatically modified by external fields that control the phase change. Here, experiments and simulations are used to investigate the mechanical properties of a 2D diamond boron nitride (BN) phase induced by applying local pressure on atomically thin h-BN on a SiO2 substrate, at room temperature, and without chemical functionalization. Molecular dynamics (MD) simulations show a metastable local rearrangement of the h-BN atoms into diamond crystal clusters when increasing the indentation pressure. Raman spectroscopy experiments confirm the presence of a pressure-induced cubic BN …

Understanding The Role Of Atom Trapping In The Evolution Of Hydrocarbon Transformation Catalyst Morphology, Griffin Alexander Canning

Chemistry and Chemical Biology ETDs

Converting alkanes to other, more chemically and economically valuable molecules requires catalysts that can survive elevated temperatures and highly reducing environments. These environments can cause many metal-nanoparticle based catalysts to sinter rapidly, causing a loss of activity. They must also tolerate the coke formation, as well, since coke can restrict access to active sites by gas phase molecules, thus lowering catalytic activity. While there are routes to improve both the sinter and coke resistance of catalysts, an alternative strategy is to develop a protocol for regenerating the activity of the catalyst in question when coke formation or sintering becomes problematic. …

One-Dimensional Turbulence (Odt): Computationally Efficient Modeling And Simulation Of Turbulent Flows, Victoria B. Stephens, David O. Lignell

Faculty Publications

One-dimensional turbulence (ODT) is an accurate and computationally efficient model for simulating turbulent flows. ODT has been applied to a wide range of flow problems including reaction, multiphase, differential diffusion, heat release, buoyancy, and wall flows. Applications include use as a standalone model and as a closure for large-eddy simulation (LES). Its strength lies in the ability to capture a full range of turbulent length and time scales. The ODT model is strongly coupled with its implementation, complicating its formulations. We present a modern, open-source, object-oriented C++ implementation of ODT. The code described here and made available online can be …

An Improved Foam Modeling Technique And Its Application To Petroleum Drilling And Production Practice, Yanfang Wang

LSU Doctoral Dissertations

Foam is one of the most common used multiphase fluid in Underbalanced Drilling (UBD) and Managed Pressure Drilling (MPD). Because of its low density, high capacity of lifting and carrying cuttings, low cost and compatibility with formations, foam has become more superior than the conventional drilling mud when depleted reservoir pressure, severe lost circulation, or unstable borehole are encountered. In general, the success of foam applications rely on the understanding of the fundamentals of foam rheology in downhole conditions.

Foam rheology has been studied for decades. Conventional foam rheological models such as Power Law, Bingham Plastic, Herschel-Bulkley to explain foam …

Well Oiled Machine: Classifying Machinery Performance Reductions Using Work Order Data, Jacob Brionez, Amber Burnett, Cho Kim, Scott M. Whitney, Thomas N. Anderson, Sumeet Treehan

SMU Data Science Review

Work Order (WO) data from System Applications and Products in Data Processing (SAP) software contains valuable information about what WOs intend to accomplish. Using SAP work order data, with time-series machinery sensor data combined into the same dataset, provides an opportunity to optimize prediction models to increase performance. Ideally, WO data can be utilized to help predict machinery's anticipated performance and can help prioritize a WO among others based on the anticipated machinery performance. It is possible to identify anomalies in pump sensor data using the Isolation Forest algorithm as the method for anomaly detection. The relationship between the sensor …

Machine Learning Based Applications For Data Visualization, Modeling, Control, And Optimization For Chemical And Biological Systems, Yan Ma

LSU Doctoral Dissertations

This dissertation report covers Yan Ma’s Ph.D. research with applicational studies of machine learning in manufacturing and biological systems. The research work mainly focuses on reaction modeling, optimization, and control using a deep learning-based approaches, and the work mainly concentrates on deep reinforcement learning (DRL). Yan Ma’s research also involves with data mining with bioinformatics. Large-scale data obtained in RNA-seq is analyzed using non-linear dimensionality reduction with Principal Component Analysis (PCA), t-Distributed Stochastic Neighbor Embedding (t-SNE), and Uniform Manifold Approximation and Projection (UMAP), followed by clustering analysis using k-Means and Hierarchical Density-Based Spatial Clustering with Noise (HDBSCAN). This report focuses …

A Computational Investigation Of The Interstitial Oxidation Thermodynamics Of A Mo-Nb-Ta-W High Entropy Alloy Beyond The Dilute Regime, Adib J. Samin

Faculty Publications

High entropy alloys (HEAs) are promising candidates for high-temperature structural material applications. Oxidation is a major factor that must be accounted for when designing such materials and it is thus important to study the oxidation behavior of HEAs to enable the optimum design of next generation materials. In this study, the thermodynamic behavior of interstitial oxygen in a Mo-Nb-Ta-W high entropy alloy was explored beyond the dilute limit. This was accomplished by sampling configurations of the HEA and HEA-oxygen systems from an isothermal–isobaric ensemble using a series of first-principle-based Monte Carlo simulations. It was found that the interstitial oxygen had …