Chemical Engineering Commons^™

Controllable Synthesis Of Dispersed Spherical Fe3O4 Nanoparticles As Lithium-Inserted Materials, Hong-Li Zou, Wei-Shan Li

Journal of Electrochemistry

Dispersed spherical Fe₃O₄ nanoparticles were synthesized by a hydrothermal method. The influences of odecyl trimethyl ammonium bromide (DTAB) concentration on the morphology and particle size of the as-prepared Fe₃O₄ were studied. Electrochemical performance of the as-prepared sample as anode materials of lithium ion battery was investigated. It is found that the as-prepared sample exhibits superior rate performance and cycle performance. The nano-sized materials provide structural stability and favor the transfer of lithium ions.

Synthesis And Electrochemical Performance Of Nano Licopo4 By Polyol Method, Fei Wang, Yang Jun

Journal of Electrochemistry

High potential LiCoPO₄ cathode material was synthesized by polyol method. Carbon layer of ca. 3 nm thick was coated on the LiCoPO₄ surfaces by chemical vapor deposition from methylbenzene. Crystalline structure, morphology and electrochemical performance of the sample were studied by XRD, SEM, TEM, CV and galvanostatic charge/discharge curve. The synthesized material via polyol method showed a pure phase of LiCoPO₄. The LiCoPO₄/C electrode delivered a high discharge capacity of 132 mAh·g^-1 and maintained 78% of the initial capacity after 50 cycles at 0.1C rate. The two-step extraction/insertion behavior of Li⁺ in …

Synthesis And Electrochemical Property Of Li2Fesio4/C Cathode Material By Solid State Method, Jiao-Li Sun, Zhi-Jiao Chen, Yi-Xiao Li, Hu Cheng

Journal of Electrochemistry

Li₂FeSiO₄/C cathode material was synthesized using Li₂SiO₃ and FeC₂O₄ as raw materials by solid state method. The structure and morphology of the material were characterized by XRD and SEM. The electrochemical properties of the material were studied by constant-current cyclic testing. The results show that Li₂FeSiO₄/C has a good electrochemical performance. The first discharge capacity of Li₂FeSiO₄/C cathode material at 30oC reached 167 mAh∙g^-1 when cycled at 10 mA∙g^-1 between 1.5 and 4.8 V.

Aqueous Solution-Evaporation Route Synthesis And Phase Structural Research Of The Li-Rich Cathode Li1.23Ni0.09Co0.12Mn0.56O2 By In-Situ Xrd, Chong-Heng Shen, Shou-Yu Shen, Zhou Lin, Xiao-Mei Zheng, Hang Su, Ling Huang, Jun-Tao Li, Shi-Gang Sun

Journal of Electrochemistry

The Li-rich Li_1.23Ni_0.09Co_0.12Mn_0.56O₂ material was synthesized via aqueous solution-evaporation route. The structure and morphology of the material were characterized by means of XRD and SEM. The results indicated that the single particle of the product was polygonal with the size of 330 nm and the structure was layered solid solution with a certain amount of Li₂MnO₃. Electrochemical tests showed that the first discharge capacity of the Li-rich layered material was 250.8 mAh·g^-1 at 0.1C, the capacity retention was 86.5% after 40 cycles. Through in-situ XRD study …

A Dynamic Optimization Framework With Model Predictive Control Elements For Long Term Planning Of Capacity Investments In A District Energy System, Jose Luis Mojica Velazquez

Theses and Dissertations

The capacity expansion of a district heating system is studied with the objective of evaluating the investment decision timing and type of capacity expansion. District energy is an energy generation system that provides energy, such as heat and electricity, generated at central locations and distributed to the surrounding area. The study develops an optimization framework to find the optimal investment schedule over a 30 year horizon with the options of investing in traditional heating sources (boilers) or a next-generation combined heat and power (CHP) plant that can provide heat and electricity. In district energy systems, the investment decision on the …

A Kinetic Study Of Aqueous Calcium Carbonate, Derek Daniel Harris

Theses and Dissertations

Amorphous calcium carbonate (ACC) precipitation is modeled using particle nucleation, growth, and aggregation. The particles are tracked in terms of their radial size and particle density using direct quadrature method of moments (DQMOM). Four separate nucleation models are implemented and are compared to experimental data. In discord with a recent study, it is shown that classical nucleation, coupled with equilibrium chemistry, is in good agreement with experimental data. Novel nucleation mechanisms are presented which fit the experimental data with slightly greater accuracy. Using equilibrium chemistry it is shown that the equilibrium value of ACC is pKeq = 7.74 at 24C, …

Molecular Modeling Of Dna For A Mechanistic Understanding Of Hybridization, Terry Jacob Schmitt

Theses and Dissertations

DNA microarrays are a potentially disruptive technology in the medical field, but their use in such settings is limited by poor reliability. Microarrays work on the principle of hybridization and can only be as reliable as this process is robust, yet little is known at the molecular level about how the surface affects the hybridization process. This work uses advanced molecular simulation techniques and an experimentally-parameterized coarse-grain model to determine the mechanism by which hybridization occurs on surfaces and to identify key factors that influence the accuracy of DNA microarrays. Comparing behavior in the bulk and on the surface showed, …

Microgrid Development Using A Grid Tie Inverter, Hartono Budi Santoso, Budiyanto Budiyanto

Makara Journal of Technology

The use of renewable energy sources (RES), especially photovoltaic (PV), to meet the demand of electrical energy has been getting a great deal of attention as an alternative solution to electrical energy deficit problems. RES are being applied in power systems in a variety of configurations including microgrid systems. One of the characteristics of a microgrid is capability to supplying power to grid when there is an excess power to supply local load. This research examines the chances of saving power consumption from grid using power converters grid tie inverter (GTI) in a microgrid configuration. The test is done by …

Surface Treatment Of Fly Ash For Improving The Tensile Strength Of Fly Ash/Unsaturated Polyester Composites, Sugiman Sugiman, Paryanto Dwi Setyawan

Makara Journal of Technology

The paper presents the surface treatment of fly ashes using acid and alkali solution on the tensile strength of the fly ash/unsaturated polyester (UP) composites. Sulfuric acid (H2SO4), hydrofluoric acid (HF) and sodium hydroxide (NaOH) solution with concentration of 0%, 5%, 10%, 15%, and 20% (by weight) were used for surface treatment of fly ashes. Generally, the tensile strength of the treated fly-ash/UP composites shows a significant increase compared to the untreated fly ash. Of all surface treatments studied, the optimum tensile strength was obtained at a concentration of 10%. At this concentration, at a fly ash content of 30% …

Recycling Roof Tile Waste Material For Wall Cover Tiles, Ambar Mulyono, Silfia Mona Aryani, Joko Lulut

Makara Journal of Technology

Prior research on roof tile waste treatment has attempted to find the appropriate technology to reuse old roof tile waste by create wall cladding materials from it. Through exploration and experimentation, a treatment method has been discovered to transform the tile fragments into artificial stone that resembles the shape of coral. This baked clay artificial stone material is then processed as a decorative element for vertical surfaces that are not load-bearing, such as on the interior and exterior walls of a building. Before applying the fragments as wall tiles, several steps must be taken: 1) Blunting, which changes the look …

Synthesis Of Tungsten Oxide Nanowires Onto Ito Glass Using T-Cvd, Tomy Abuzairi, Bohr-Ran Huang, Tzu-Ching Lin

Makara Journal of Technology

Tungsten oxide is an n-type semiconductor with interesting physical and chemical properties that make it suitable for various technological applications. Tungsten oxide nanowires were synthesized not only at low temperature but also without the use of any catalysts. The tungsten oxide nanowires were synthesized at 550 °C with tungsten layers onto the ITO glass using thermal chemical vapor deposition (T-CVD). The SEM image shows that the tungsten oxide nanowires are effectively grown with the 200 nm tungsten film. The Raman spectra shoulder at ~690 cm-1 proves the synthesized of tungsten oxide nanowires.

Semiconductor Thermal Neutron Detector, Toru Aoki, Aki Miyake, Takayuki Nakano, Akifumi Koike, Hisashi Morii, Hidenori Mimura

Makara Journal of Technology

The CdTe and GaN detector with a Gd converter have been developed and investigated as a neutron detector for neutron imaging. The fabricated Gd/CdTe detector with the 25 mm thick Gd was designed on the basis of simulation results of thermal neutron detection efficiency and spatial resolution. The Gd/CdTe detector shows the detection of neutron capture gamma ray emission in the 155Gd(n, g)156Gd, 157Gd(n, g)158Gd and 113Cd(n, g)114Cd reactions and characteristic X-ray emissions due to conversion-electrons generated inside the Gd film. The observed efficient thermal neutron detection with the Gd/CdTe detector shows its promise in neutron radiography application. Moreover, a …

Radiation Characteristics Of A Planar Strip Dipole Antenna And A Slot Dipole Antenna For Thz Applications, Catur Apriono, Eko Tjipto Rahardjo

Makara Journal of Technology

The development of a THz system often requires a device that is used to radiate or detect THz waves. One way to fulfill this requirement is to use an antenna. Therefore, we need to consider the radiation characteristics of an antenna working in the THz region. In this paper, we present simulation study of two dipole antennas, i.e. a planar strip dipole antenna and a slot dipole antenna. The simulation results show that a planar strip dipole antenna has a better radiation efficiency (more than 95%) compared to the slot dipole. It also shows that an efficiency of more than …

The Effect Of Pressing Temperature And Time On The Quality Of Particle Board Made From Jatropha Fruit Hulls Treated In Acidic Condition, Apri Heri Iswanto, Fauzi Febrianto, Yusuf Sudo Hadi, Surdiding Ruhendi, Dede Hermawan

Makara Journal of Technology

The high of pH of jatropha fruit hulls causes the negative properties of particleboard made from this material. Adjusting the particle acidity and pressing conditions (temperature and time) is among the technical modifications available to improve this particleboard’s properties. Particle acidity has been adjusted in a previous research project, and immersing the particles in acetic acid was found to be the best treatment in this preliminary research. In order to improve the particleboard’s properties, an experiment was conducted to determine the best pressing temperature and time. The objective of the research was to evaluate the influence of pressing temperature and …

Minimal Medium For Optimal Growth And Lipid Production Of The Microalgae Scenedesmus Dimorphus, Colin Welter, Jacob Schwenk, Bahar Kanani, John Van Blargan, Joanne M. Belovich

Chemical & Biomedical Engineering Faculty Publications

The culture of Scenedesmus dimorphus at the laboratory scale has often been in standard microalgae media, such as 3N-Basal Bold medium (3N-BB), which contains 15 different chemicals. Given the extremely tight profit margins of large-scale production of biofuel from microalgae, it is important to identify the minimally sufficient quantities of nutrients necessary to maximize lipid productivity. The individual and interactive effects of six groupings of the components of 3N-BB medium on growth rate, lipid content, and total biomass yield of S. dimorphus were determined. Trace metal and vitamin concentrations were reduced to 1/6 the level of 3N-BB medium without adversely …

Reassessment Of Biowish Activation Procedure For Denitrification, William Wah Yee

Master's Theses

BiOWiSH^TM – Aqua is a blend of preserved multi-bacteria culture with the capability of denitrification. If an anaerobic nitrate rich activation procedure is used instead of the standard aerobic activation procedure, the denitrification rate is increased by 28 percent under the conditions of 30°C, 1C:1N, 200mg/L of carbon, and 200mg/L nitrogen.

Sulfonated Perfluorocyclobutyl (Pfcb) Aryl Ether Polymers: Synthesis, Reactivity, And Characterization For Polymer Electrolyte Applications, Jiyoung Park

All Dissertations

Perfluorocyclobutyl (PFCB) aryl ether copolymers are excellent candidates for proton exchange membrane (PEM) component in PEM fuel cells. Sulfonated PFCB copolymer membranes exhibit not only high chemical/thermal/mechanical stability but also high proton conductivity. In this regard, PFCB aryl ether copolymers were synthesized via thermal step-growth [2 + 2] cyclopolymerization from aryl bis-(trifluorovinyl ether) (TFVE) monomers and oligomers. Experimental and computational studies confirmed that copolymerization of relatively electron-rich and electron-poor TFVE monomers gave selective-segmented copolymers in an one-pot polymerization. After sulfonation, the PFCB copolymers comprising hydrophilic and hydrophobic segments gave membranes with high proton conductivity. Cross-linked membranes of the sulfonated PFCB …

Structural Characterization Of Super-Acid Oligomerized Fatty Esters., Esam Allehyani

Electronic Theses & Dissertations

Fatty acid methyl esters can be oligomerized with very strong acid catalysts - superacids such as tetrafluoroboric or triflic acid with formation of dimer and trimer fatty acids at much lower temperature, such as 80-90 °C, than what is used presently. Insight into the reaction of polymerization of fatty esters/ acids can be obtained by structural characterization. This would determine the properties of the oligomeric products and their ability to substitute currently used materials. It was presumed that dimer fatty, trimer fatty acid esters, and oligomeric fatty acid esters are produced by polymerization of fatty acid methyl esters by a …

Gas Composition Analysis Using Limited Production Data Eagle Ford Case Study, Ryckur K. Shuttler

Honors Capstones

No abstract provided.

Manufacturing The Next Generation Of Vaccines: Non-Egg Based Platform For Influenza Vaccine, Andrew B. Price

Chemical Engineering Undergraduate Honors Theses

This report explores the design of an influenza vaccine manufacturing facility using a non-egg based expression platform. The current standard procedure in flu vaccine production is to grow the virus in bird eggs. However, recently there is evidence that supports production by other expression platforms. The Sf9 insect cell is considered in this report. Facility design including cell culture media formulation through product storage for shipment and final formulation is considered based on the use of an existing facility. The new design also employs the use of disposable equipment such as bioreactors and purification unit operations. These disposables help reduce …

Formulation And Evaluation Of Resistive Inks For Applications In Printed Electronics, Sughosh Satish Bhore

Masters Theses

In the 21^st century, it has been shown that printing methodologies can be used to print electrically functional devices on a variety of substrates. In comparison to conventional electronic manufacturing methods, printing is a more cost effective and less complex process. The requirements for manufacturing Printed Electronics (PE) components are much more demanding than graphic printing applications due to the additional requirement of easy electron flow. This additional requirement increases the need for print uniformity and layer-to-layer registration to a much higher degree. In this work, hybrid UV-curable, water-based, electrical resistive inks were formulated. Inkjet inks were prepared by …

Fuctional Properties Of Phthalocyanine Dye Based Inks, Yumeizhi Jia

Masters Theses

Currently, inkjet printing techniques are getting more attention. They have the features of non-contact and additive patterning feasibility, compatibility with different substrates (the materials on which the ink is printed), low temperature processing, and low cost (1) (2). They can be used for patterning solution processable polymers or nanoparticle inks on various substrates including conductive materials, paper and glass (3). The need for proper functional inks is increasing every year. The goal of my work was to formulate a phthalocyanine water based ink, which can work as a dielectric ink. In my research, all the materials which were used to …

Characteristics Of Glass Ionomer Cements Composed Of Glass Powders In Cao-Sro-Zno-Sio2 System Prepared By Two Different Synthetic Routes, Ill Yong Kim, Chikara Ohtsuki, Aisling Coughlan, Lana Placek, Anthony W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass ionomer cements (GICs) are composed of an acid degradable glass, polyacrylic acid and water. Sol-gel processing to prepare the glass phase has certain advantages, such as the ability to employ lower synthesis temperatures than melt quenching and glasses that are reported to have higher purity. A previous study reported the effects of glass synthesis route on GIC fabrication. However, in that study, the sol-gel derived glass exhibited a reduced concentration of cations. This study investigates increasing the cation content of a sol-gel derived glass, 12CaO·4SrO·36ZnO·48SiO₂ (molar ratio) by heating before aging to reduce dissolution of cations. This glass …

Synthesis Of Ferrocene Copolymers And Investigation Of Their Electrochemical Properties., Alzharani Ahmed

Electronic Theses & Dissertations

Ferrocene is an organometallic compound. It is a classical metallocene consisting of two cyclopentadienyl rings bound on opposite sides of a central iron atom. Such organometallic compounds are also called sandwich compounds. Ferrocene copolymers have well known electrochemical capabilities. The main objective of this thesis is to synthesize vinyl ferrocene copolymers and test their electrochemical properties in aqueous solutions with different electrolytes (sodium nitrate, sodium perchlorate, and phosphate buffered saline). Vinylferrocene and 3-phenyl[5]ferrocenophane-1,5- dimethylene were synthesized using a Wittig reaction. Both ferrocene monomers were copolymerized with N-ethylmaleimide and N-phenylmaleimide and the resulting polymers were analyzed by Gel Permeation chromatography, IR …

Investigation Of Recycled Paper Deinking Mechanisms, Veronika Husovska

Dissertations

The use of water-based inks is on the rise. Sub-micron pigment particles are used for flexographic and inkjet water-based inks. Conventional deinking eliminates larger particles than those from these new ink systems. Therefore, water-based inks represent recycling difficulty.

Deinking experiments of water-based inks are carried out. The deinking strategy initially investigated elimination of pressure sensitive adhesive due to similar acrylic polymer chemistry used in water based inks. The impact of pH on stickies and ink agglomeration during deinking is studied. Experiments in acidic regions show growth of acrylic inks and stickies agglomerates, simplifying elimination.

Pre-recycling of water-based inks is explored. …

Uv-Assisted Stabilization Of Polyacrylonitrile-Based Carbon Fiber Precursors, Marlon Salvador Morales Sandoval

All Dissertations

Due to their high strength and stiffness coupled with low density, carbon fibers are the preferred reinforcing fibers used in high-performance polymer matrix composites. Consequently, the demand for carbon fibers is expected to grow from 40,000 metric tons to about 150,000 metric tons over the next decade. A large fraction of the increase is anticipated in the industrial sector that is cost-sensitive. Therefore, there is a need for the development of novel processes and precursors to reduce the carbon fiber production cost and expand the use of carbon fibers. This research focuses on the development of an alternative, rapid stabilization …

Pyrene Oligomers: Their Isolation, Molecular Characterization, And Phase Behavior, David Esguerra Taborda

All Dissertations

Carbonaceous pitches can serve as attractive precursors for advanced carbon materials such as high thermal conductivity fibers or carbon-carbon composites. Yet the effects of composition and molecular structure on the bulk properties (e.g., mesophase content and melting point) of these precursors remain only partly known, mainly because of the difficulties associated with the isolation, identification, and quantification of the large (i.e., molecular weight (mol wt) > 350-400 Da) polycyclic aromatic hydrocarbon (PAH) oligomers comprising these pitches. In this study, oligomeric fractions were isolated via supercritical extraction (SCE) from two representative pitches: a petroleum pitch (M-50) produced by the thermal polymerization of …

Effect Of Graphitic Carbon Nanomodifiers On The Electromagnetic Shielding Effectiveness Of Linear Low Density Polyethylene Nanocomposites, Byron Villacorta Hernandez

All Dissertations

Conductive polymer composites have become alternative materials for providing electromagnetic and electrostatic shielding where metals are not suitable. In this study, the effect of crystallinity, morphology, concentration and orientation of carbon nanomodifiers on shielding provided by their polyethylene-based composites has been investigated relative to their transport properties.

First, the electrical properties and EM SE of composites consisting of heat-treated carbon nanofibers (Pyrograf^® -III PR-19 CNF) in a linear low density polyethylene (LLDPE) matrix were assessed. Heat treatment (HT) of CNF at 2500°C significantly improved their graphitic crystallinity and intrinsic transport properties, thereby increasing the EM SE of the nanocomposites. …

Developing Process Control Experiments For Undergraduate Chemical Engineering Laboratories, Chase M. Swaffar

Graduate Theses and Dissertations

It is the intent of this work to develop a process control apparatus and series of experiments that will help students visualize the PID (Proportional-Integral-Derivative) control of a process and enhance their understanding of the subject. The apparatus is a computer-controlled PID mixing system that responds quickly to set point changes and process disturbances which are directly observable. The system can easily be simulated with a transfer function model in Matlab's Simulink, so that the controller can be optimized for the desired system response. Four experiments can be conducted with this system including: exploration of system modeling and controller optimization …

Structure, Rheology And Optical Properties Of Plasmonic Fluids, Tao Cong

Dissertations - ALL

Fluids with tunable optical and rheological properties are of fundamental and practical interest. They can be easily processed to manufacture thin films and interfaces for applications such as molecular detection and light trapping in photovoltaics. Cationic surfactants such as cetyl-trimethylammonium bromide have the ability to self assemble with metallic nanoparticles to form a corona or a double-layer vesicular structure. These structures upon further interaction with wormlike micelle fragments are hypothesized to form micelle-nanoparticle elastic networks. In this dissertation, solution phase self-assembly is utilized to uniformly distribute various metallic nanoparticles to produce stable multicomponent plasmonic fluids with remarkable color uniformity. The …