Chemical Engineering Commons^™

Lithospheric Evolution Of The South-Central United States Constrained By Joint Inversion Of Receiver Functions And Surface Wave Dispersion, Tuo Wang, Stephen S. Gao, Kelly H. Liu, Kevin L. Mickus, Ling Chen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In the present study, we use broadband seismic data recorded by 190 stations of the EarthScope program's Transportable Array to construct a 3-D shear wave velocity model for the upper 180 km using a non-linear Bayesian Monte-Carlo joint inversion of receiver functions (RFs) and Rayleigh wave dispersion curves. Ambient noise and teleseismic data are used for obtaining Rayleigh wave phase velocity dispersion curves. A resonance removal filtering technique is applied to the RFs contaminated by reverberations from the thick sedimentary layers that cover most of the region. Our observations of the higher crustal shear velocities (∼3.40 km/s) beneath the Sabine …

A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-Based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. the new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …

Understanding The Impact Of Microplastic Contamination On Soil Quality And Eco-Toxicological Risks In Horticulture: A Comprehensive Review, N. P. Gayathri, Geena Prasad, Vaishna Prabhakaran, Vishnu Priya

Research outputs 2022 to 2026

The horticulture sector, essential for global food production, confronts significant challenges with prevalent pollutants, mainly microplastics. The presence of microplastics in the food chain has induced physiological stress and a multifactorial food safety concern. The complexity of the problem, arising from intricate interactions among microplastics, organisms, and ecosystems, poses a substantial challenge to food safety, necessitating an immediate strategic perspective due to the associated risks to human health and eco-toxicology. Significant knowledge gaps persist regarding their impact on terrestrial ecosystems, especially in horticulture. This study addresses the urgent need to comprehend the implications of microplastics on soil health, eco-toxicological risks, …

Enhancing Entrepreneurial Minded Learning Of Process Control And Heat Transfer Concepts Using Micromoments And Concept Maps, Erick S. Vasquez-Guardado, Ricardo Gomez Gonzalez, Jean M. Andino, Nilza D. Aples, Xiaojing Yuan

Chemical and Materials Engineering Faculty Publications

The Entrepreneurially Minded Learning (EML) Framework seeks to infuse an Entrepreneurial Mindset in engineering students. The EML framework is founded on the 3 C’s principles of curiosity, connections, and creating value. Assessing EML efforts, however, is a well-known challenge for many engineering courses that do not have a design component. Through concept maps and micromoment activities, this work seeks to answer the following questions: Does implementing micromoment activities enhance students’ EML in two core areas of chemical engineering, i.e., heat transfer and process controls? A secondary research question is whether introducing a physical device in lectures enhances students’ EML. The …

Using Micromoments And Concept Maps To Enhance Entrepreneurially Minded Learning Of Indoor Air Pollution Control, Jean M. Andino, Erick Salvador Vasquez-Guardado, Ricardo Gomez Gonzalez, Xiaojing Yuan, Nilza D. Aples

Chemical and Materials Engineering Faculty Publications

Micromoments targeted toward indoor air quality were introduced to students in an Air Quality Engineering course to enhance their entrepreneurial mindset. Three micromoment activities, i.e., “Question Frenzy”, “Make It Relevant”, and “How Do We Make It Better?” that are linked, respectively, to the curiosity, connections, and creating value elements of EM were deployed in the class in the context of the use of a Corsi Rosenthal cube (a do-it-yourself structure that has recently become popular as an inexpensive way to reduce indoor particle pollution). Students generated concept maps pre-and post- micromoment intervention using the freely available CMap Tools software. The …

A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. The new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …

The Synthesis, Characterization, And Application Of Polysaccharide-Based Additive To Improve Wet And Dry Strength And High-Barrier Properties Of Paper Products, Cornellius Marcello

Dissertations

Paper products play an essential role in our daily lives owing to their low cost, environment-friendly character, renewability, and recyclability. Paper manufacturers have been using petroleum-based strength additives (cPAM, GPAM, PAE) to meet the perceived needs of customers. On the other hand, paper produced from cellulose is hydrophilic and porous, leading to shallow water and grease resistance, causing paper manufacturers to use many kinds of coating materials such as poly-fluoroalkyl substances (PFAS) and synthetic plastic to improve water resistance, especially for food packaging paper products like cups, plates, food boxes, and packaging. However, PFAS are identified as likely carcinogenic to …

Creating Advanced Processes Through Utilizing Renewable Eutectics For Gas Capture And Separation, Ahmad Mohammad Rasheed Al-Bodour

Dissertations

Global efforts to reduce emissions of environmentally harmful gases have intensified, with carbon dioxide (CO2) being identified as the most significant greenhouse gas and a key target for reduction strategies. Carbon dioxide (CO2) has the highest potential of threatening the environment. It is recognized as one of the greenhouse gases which has the potential of negative effects on the human being, atmosphere, and the environment. Even though CO2 gas has negative effects but at the same time it has high potential to be exploited in beneficial ways. For instance, CO2 is used in the energy field to produce the so-called …

An Analytical Investigation Into Solute Transport And Sorption Via Intra-Particle Diffusion In The Dual-Porosity Limit, Lucy C. Auton, Maria Aguareles, Abel Valverde, Timothy G. Myers, Marc Calvo-Schwarzwalder

All Works

We develop a mathematical model for adsorption based on averaging the flow around, and diffusion inside, adsorbent particles in a column. The model involves three coupled partial differential equations for the contaminant concentration both in the carrier fluid and within the particle as well as the adsorption rate. The adsorption rate is modelled using the Sips equation, which is suitable for describing both physical and chemical adsorption mechanisms. Non-dimensionalisation is used to determine the controlling parameter groups as well as to determine negligible terms and so reduce the system complexity. The inclusion of intra-particle diffusion introduces new dimensionless parameters to …

Simulation Of Heat And Mass Transfer In A Refractance Window Dryer For Aloe Vera Gel, A. Shahraki, M. Khojastehpour, M. R. Golzarian, E. Azarpazhooh

Research outputs 2022 to 2026

Introduction Drying is one of the oldest methods of food preservation. To increase the efficiency of heat and mass transfer while maintaining product quality, the study of the drying process is crucial scientifically and meticulously. It is possible to conduct experimental tests, trial and error, in the drying process. However, this approach consumes time and cost, with a significant amount of energy resources. By harnessing available software and leveraging technological advancement to develop a general model for drying food under varying initial conditions, the drying process can be significantly optimized. Materials and Methods This study was conducted with the aim …

Interaction Of Particles With Plasma And Shock Produced By Pulsed Spark Discharge, Shomik Mukhopadhyay

Dissertations

Interactions of powders with high-temperature plasma and shockwaves occur in diverse scenarios, such as nuclear blasts, accidental industrial dust explosions, solid propellant combustion in explosive charges and when removing contaminants from surfaces. Electrostatic Discharge (ESD), known for generating shock and plasma, is a promising lab-scale technique for simulating these interactions. Studies with ESD involved placing powders near a spark-producing gap between electrodes and observing mechanical and chemical processes like particle motion and ignition. A limited range of spark conditions and material properties have been tested, which facilitated the development and validation of preliminary computational models describing this system. Significant gaps …

Molecular-To-Continuum Scale Modeling Of Aerosols: Atmospheric Application And Beyond, Ella Ivanova

Dissertations

Aerosol modeling is critical for various applications, such as climate forecasting, air quality, and human health impact assessment. During their lifetime, aerosols undergo a complex evolution, usually divided into several stages — formation, processing, transport, and removal — that occur on different scales. Thus, the choice of modeling methods depends on the stage considered. For example, certain stages of particle formation may require nano-scale modeling while aerosol-cloud interactions span from microscale to mesoscale. This study examines the modeling of aerosol behavior over a wide range of scales, from nano to microscale, with implications to mesoscale.

This dissertation focuses on two …

Microplastic Abundance And Removal In Stormwater Using Green Infrastructure, Meghana Parameswarappa Jayalakshmamma

Dissertations

Microplastics (MPs) are increasingly recognized as a pervasive environmental contaminant, conveying other contaminants, accumulating in aquatic organisms, and posing ecological risks. The existing research has primarily focused on MPs in wastewater treatment plant effluents in surface waters. However, the role of stormwater systems in MP transport has been less explored. Given the rise in MPs from urban sources, stormwater runoff from urban areas may serve as a critical conduit for transporting land-based MPs into aquatic environments. Green infrastructures (GIs) have been recognized for mitigating flooding and improving water quality from minor storms by trapping stormwater pollutants. Yet, the capability of …

Targeted Drug Delivery: Investigating Protein Corona Behavior, Atharva Markale

Theses

Due to high specificity and less toxicity, nanoparticles have become promising for targeted drug delivery against cancer, although they face challenges when they enter the bloodstream, making their behavior unpredictable. The deposition of proteins on nanoparticles, the protein corona, changes their biosignature, affecting their circulation, drug release potency, targeting ability, and immunogenicity. The continuous exchange of protein layers on a nanoscale is complex to analyze.

Nanoparticle tracking analysis (NTA) is a method to characterize nanoparticles in blood plasma by combining principles of light scattering microscopy and Brownian motion. In this work, time-dependent experiments with plasma were conducted to analyze the …

Electrochemical Nitrate Reduction To Ammonia On Cu Based Nanoparticles Using Quantum Mechanical Simulations, Kathan Bhavin Shukla

Theses

Nitrate reduction to ammonia (NRA) is critical for environmental remediation and energy conservation, as it can remove harmful nitrate (NO₃^-) from water sources while producing usable ammonia (NH₃). Cu represents one of the most promising non-noble-metal NRA electrocatalysts. However, the intrinsic catalytic activity of Cu facets and their influence under different pH conditions remain unclear, particularly in the presence of ions commonly found in wastewater such as Cl^-, Na⁺, Mg²⁺, and Ca²⁺. Using density functional theory (DFT) calculations, we evaluated the nitrate reduction to ammonia (NRA) pathways …

Utilization Of Iron Fillings Solid Waste For Optimum Biodiesel Production, Fady Ihab Bayoumy Eng., Ahmed Osman Ahmed Dr., David W. Rooney Dr., Mai H. Roushdy

Chemical Engineering

This study explores the innovative application of iron filings solid waste, a byproduct from mechanical workshops, as a heterogeneous catalyst in the production of biodiesel from waste cooking oil. Focusing on sustainability and waste valorization, the research presents a dual-benefit approach: addressing the environmental issue of solid waste disposal while contributing to the renewable energy sector. Particle size distribution analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), Thermal analysis (TG-DTA), and FTIR analysis were used to characterize the iron filings. The response surface methodology (RSM) was used to guide a series of experiments that were conducted to …

Comparison Of Ligands In Palladium-Catalyzed Electrochemical Allyl 4-Pyridinylation, Wei-Jie Ding, Chun-Hui Yang, Zhong-Tao Feng, Shi-Rong Lu, Xu Cheng

Journal of Electrochemistry

4-CN-pyridine is a widely applied 4-pyridinylation reagent for diverse transformations. Conventionally, the reaction proceeds via an open-shell radical cross-coupling pathway. Following our previous study, in this work, we report the Pd-catalyzed allyl 4-pyrinylation reaction under electrochemical conditions. The reaction proceeds via radical-polar crossover pathway in which the role of phosphine ligand in reactivity and selectivity was extensively investigated.

Nickel-Catalyzed Α-Arylation Of Α-Cyanoacetates Enabled By Electrochemistry, Zi-Meng Li, Zhang-Jian Li, Anat Milo, Ping Fang, Tian-Sheng Mei

Journal of Electrochemistry

β-Amino acids have a wide range of applications in the field of pharmaceuticals. Utilizing a combination strategy of nickel catalysis and paired electrolysis, a catalytic α-arylation protocol of carbonyl compounds has been developed. This protocol affords various a-aryl-a-cyanoacetates, which can be reduced to high-value-added α-aryl-β-amino acids. The cross-coupling reaction of electron-deficient aryl bromides with a-cyanoacetates achieves the expected products with good yields and functional group compatibility under mild conditions. Excessive electron-richness in initial aryl bromides facilitates the self-coupling of desired products. DFT calculations confirm that the presence of electron-rich aryl substitutions decreases the reduction potentials of the product anions, making …

Recent Advance In Electrochemical Dehalogenative Deuteration, Peng-Fei Li, Guang-Sheng Kou, Li-Ping Qi, You-Ai Qiu

Journal of Electrochemistry

In recent years, the incorporation of deuterium atoms into organic compounds has emerged as a vital focus in the development of pharmaceutical molecules. This trend is driven by the increasing recognition of the significance of compounds containing deuterium atoms across various domains, including materials and biopharmaceuticals, where they have found widespread applications in mechanistic studies within the realms of chemistry and biology. Meanwhile, organic electrochemistry, as a relatively environmentally friendly catalytic mode with broad adaptability to redox reactions, has emerged as a crucial alternative to traditional halogen-deuterium exchange in the context of the reduction deuteration of halides. This approach circumvents …

Synthesis Of Geopolymer Using Coal Fly Ash And Corn Stover, Anu Paneru

Master's Theses

The development of each nation is dependent on its infrastructure, and nations are competing with others in infrastructure, especially in the construction of roadways, since they play a vital role in the economic and social development of the nation. The conventional materials used for road construction are cement and asphalt, which pose significant environmental challenges. This thesis explores the potential of fly ash (FA) and corn stover (CS) in synthesizing geopolymer, as an alternative material for the construction of roads. The study examines the impact of FA and CS percentages and the particle sizes of CS on the compressive strength, …

Communication—The Development Of A Stable And Practical Saturated Reference Electrode For Molten Chloride Salt Systems, J. Marvin Torrie, Ranon Fuller, Devin Rappleye

Faculty Publications

A simply constructed, stable, Ni/Ni²⁺ saturated reference electrode (SRE) has potential to measure thermodynamic behavior of molten chloride salts more reliably. Like the Ag/Ag⁺ reference electrode (RE), the Ni/Ni²⁺ SRE is made of commercially available materials. Initial experiments in molten CaCl2 and LiCl show the Ag/Ag⁺ RE potential drifting two times faster than the SRE. Furthermore, experiments show the replicability of SREs by comparing two Ni/Ni²⁺ SREs with different compositions of NiCl₂ which is supportive of saturated phase behavior.

Recent Progress And Perspectives Of Liquid Organic Hydrogen Carrier Electrochemistry For Energy Applications, Jinyao Tang, Rongxuan Xie, Parsa Pishva, Xiaochen Shen, Yanlin Zhu, Zhenmeng Peng

Faculty Publications

Amidst the global pursuit of clean and sustainable energy, the transition towards a hydrogen economy holds immense promise, yet is encumbered by significant storage challenges. Liquid organic hydrogen carrier (LOHC) electrochemistry emerges as a promising solution to enable efficient and sustainable hydrogen storage, meanwhile broadening the horizons of LOHCs for use as clean, renewable, and intense energy carriers to store and generate electricity. In this perspective, we embark on a review of recent trends and progress in LOHC redox electrochemistry, properties, and applications. We categorize electrochemically active, regenerable LOHCs into alcohols, amines, aromatic compounds, aminoxyl species, and others, based on …

Kinetic Studies Of Liquid Phase Hydrogenation Of Acetylene For Ethylene Production Using A Selective Solvent Over A Commercial Palladium/Alumina Catalyst, Humayun Shariff, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Kinetics of Selective Hydrogenation of Acetylene in the Liquid Phase over a Commercial 0.5 Wt % Pd/Al2O3 Spherical Catalyst Was Investigated in a Stirred-Tank Basket Reactor. the Liquid Phase Was Acetylene Gas Absorbed in a Selective Solvent, N-Methylpyrrolidone (NMP). the Reactor Was Operated at a Pressure Range of 15-250 Psig with Temperature Varying from 60 to 100 °C using Different Catalyst Loadings to Identify the Suitable Operating Conditions. the Kinetic Experiments Were Conducted in the Absence of External Mass Transfer Resistances with the Liquid Phase in Batch Mode and the Gas Phase Being Continuous. the Initial Rates Varied Linearly …

Pet And Polyolefin Plastics Supply Chains In Michigan: Present And Future Systems Analysis Of Environmental And Socio-Economic Impacts, Utkarsh S. Chaudhari, Kamand Sedaghatnia, Barbara K. Reck, Kate Maguire, Anne T. Johnson, David Watkins, Robert M. Handler, Tasmin Hossain, Damon S. Hartley, Vicki S. Thompson, Alejandra Peralta, Jenny L. Apriesnig, David Shonnard

Michigan Tech Publications

Many actions are underway at global, national, and local levels to increase plastics circularity. However, studies evaluating the environmental and socio-economic impacts of such a transition are lacking at regional levels in the United States. In this work, the existing polyethylene terephthalate and polyolefin plastics supply chains in Michigan were compared to a potential future (‘NextCycle’) scenario that looks at increasing Michigan’s overall recycling rate to 45%. Material flow analysis data was combined with environmental and socio-economic metrics to evaluate the sustainability of these supply chains for the modeled scenarios. Overall, the NextCycle scenario for these supply chains achieved a …

A Rechargeable Metal-Co2 Battery Using Lower-Cost Materials, Chris Fetrow

Nanoscience and Microsystems ETDs

High energy density, low-cost chemical conversion batteries are widely studied for their potential application to applications in which current battery technologies are unsuitable replacements for fossil fuel-powered systems. The demonstration of rechargeable chemical conversion batteries, and particularly batteries without the fatal flaw of high overpotential due to the difficulties inherent to chemical conversion reactions, is of great interest to further both this aim. In this work, a secondary Al-CO2 battery was demonstrated using a homogeneous aluminum iodide redox mediator to enable the battery’s discharge and charge at a high energy density and a low overpotential of 0.05 Volts. The operation …

Recent Progress And Perspectives Of Liquid Organic Hydrogen Carrier Electrochemistry For Energy Applications, Jinyao Tang, Rongxuan Xie, Parsa Pishva, Xiaochen Shen, Yanlin Zhu, Zhenmeng Peng

Faculty Publications

Amidst the global pursuit of clean and sustainable energy, the transition towards a hydrogen economy holds immense promise, yet is encumbered by significant storage challenges. Liquid organic hydrogen carrier (LOHC) electrochemistry emerges as a promising solution to enable efficient and sustainable hydrogen storage, meanwhile broadening the horizons of LOHCs for use as clean, renewable, and intense energy carriers to store and generate electricity. In this perspective, we embark on a review of recent trends and progress in LOHC redox electrochemistry, properties, and applications. We categorize electrochemically active, regenerable LOHCs into alcohols, amines, aromatic compounds, aminoxyl species, and others, based on …

Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …

Development Of Agar-Based Preformed Particle Gel For Water Control In High-Salinity Reservoirs, Ahmed Ben Ali, Reem Elaf, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Oil Extraction Faces Challenges in Cost and Complexity Due to Excessive Water Production, Leading to Diminished Hydrocarbon Recovery. Preformed Particle Gels (PPGs) Hold Promise for Enhancing Oil Recovery and Sealing High-Permeability or Fractured Zones. However, Current PPGs Encounter Limitations in High-Temperature Reservoirs, Including Salt Sensitivity and Potential Hazards. to Address These Issues, We Propose Eco-Friendly PPGs Utilizing Agar Polysaccharides. Agar Backbones Grafted with Acrylamide (AM) and AM/N,N′-Methylenebis(AM) (MBA) Via Microwave-Assisted Techniques Resulted in Polyacrylamide Grafted Agar (Ag/PAM) and Cross-Linked Polyacrylamide Grafted Agar (Ag/PAMBA). Various Sizes (75 Μm to 1.18 Mm) Were Prepared to Accommodate Diverse Reservoir Porosities and Ensure Effective …

Air Quality Assessment On Local And Hyperlocal Scales, Zhiyao Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Air quality monitoring across local and hyperlocal scales has attracted increased attention from both the public and research community. There are several approaches such as passive samplers and low-cost air quality sensors, depending on the pollutant and measurement objectives. Local and hyperlocal air pollutant measurements help to characterize local emission sources such as traffic and industry, including separating these signals from large scale influences (e.g., urban and regional scales), and better understand how land use types and meteorology influence pollutant spatiotemporal patterns. Low-cost sensors (LCS) are now a popular approach to monitor several criteria pollutants (e.g., particulate matter (PM), ozone, …

Development Of An Experimentally Validated Computational Fluid Dynamics Model For A Pbi Membrane-Based Anhydrous Hcl Electrolyzer, Kris Likit-Anurak, Hunter R. Teel, Ishwor Karki, Ben I. Howard, Brian C. Benicewicz, Sirivatch Shimpalee, Benjamin H. Meekins

Faculty Publications

We report the development of an experimentally-validated computational fluid dynamics (CFD) model for simulation of an anhydrous HCl electrolyzer. The experimental data from 3 membrane variants was used to provide kinetic and membrane parameters for the model. The model not only accurately simulates overall electrolyzer performance, but it also provides key insights into the transport phenomena within the electrolyzer. The model allows simulation of experimental parameters like high HCl flowrates and increased cell pressure that pose a high safety risk to researchers. The model shows hotspots in the temperature distribution that will need to be addressed by flow field modification …