Aerospace Engineering Commons^™

An Investigation Of Starting Techniques For Inward Turning Inlets At Flight Speeds Below The On-Design Mach Number, John D. Mack

Theses and Dissertations

The purpose of this study was to create and investigate starting techniques aimed at allowing complex, three-dimensional, inward-turning inlets to start by swallowing the shock wave associated with unstarted inlets. The techniques are rooted in supersonic diffuser theory and the Kantrowitz limit; they attempt to alleviate the over contraction that occurs in inward-turning inlets at flight speeds below the on-design Mach number. Five cases, three geometries at two flow conditions and the base non-modified inlet at the two flow conditions, were generated, and all were numerically simulated using a commercially produced numerical solver: CFD++. The simulations were computed using the …

Can A 10cm Cube Picosatellite Have Any Real Application In Space?, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Can a 10cm Cube Picosatellite Have Any Real Application in Space?" from May 13, 2005.

Derivation Of A Numerical Method For Computing 3-D Magnetoplasmadynamic Flows In Thermodynamic Non-Equilibrium, Caroline CéCile Marcelle Liron

Master's Theses - Daytona Beach

Various models exist for the propulsion concept using magnetohydrodynamics (MHD). Various authors, such as Powell, Canupp, Candler, and MacCormack have dealt with issues of solving the magnetic field induction equations simultaneously with Navier-Stokes equations using Computational Fluid Dynamics (CFD). Although most authors deal with species non-equilibrium and thermal non-equilibrium, a new emphasis is set to study the impact of electrons with the electron energy and the electronic excitation energy, as well as a complex energy non-equilibrium.

This thesis presents the derivation of a numerical method for computing 3-D MHD flows for the purpose of modeling steady-state magnetoplasma …

Design Of A Prototype Model Aircraft Utilizing Propulsive Airfoil Technology, Richard L. Pepe

Renée Crown University Honors Thesis Projects - All

Researchers have considered the concept of a simple, compact aircraft for personal use for many years. To date, no effort has led to the development of a practical and affordable vehicle. The Computational Fluid Dynamics (CFD) Lab atSyracuseUniversity, however, has been researching a distributed propulsion technique, called propulsive airfoil technology, that has significant promise to meet the requirements for personal ownership of a small, hybrid road and air vehicle.

The propulsive airfoil concept is rooted in HVAC technology, utilizing a cross-flow fan (CFF) embedded into the trailing edge of a thick airfoil section, drawing in air from the top surface …

Modeling Interface Failure In Fiber-Composites, Andrew J. Craig

Renée Crown University Honors Thesis Projects - All

Interface failure has been studied in depth for more than the past twenty years due to its significant impact on the application of composite materials. The objective of this work is to investigate the role of the interface in the mechanical response of fiber-matrix composite materials subjected to an applied load. To do this, a single composite cylinder consisting of a rigid core, the fiber, and an elastic annulus, the matrix, with an interface of vanishing thickness separating them, is considered as the first step in what will later be representative of a composite material. Three non-linear, Needleman-type, force-separation relations …

Stanford Satellite & Polar Programs: Polar Technology Conference, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Stanford Satellite & Polar Programs: Polar Technology Conference" from April 23, 2005.

Studying The Troposphere, Stratosphere And Ionosphere Of The Earth, Per Hoeg

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Per Hoeg titled "Studying the Troposphere, Stratosphere and Ionosphere of the Earth" from April 7, 2005.

A New Use For Cubesats Utilizing Low Data Rate Downlinks: Stec2005, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "A New Use for CubeSats Utilizing Low Data Rate Downlinks: STEC2005" from April 6, 2005.

Damage Assessment And Strength Predictions In S-Glass/Epoxy Laminates Subjected To Low Energy Impact, Tuan-Khoi Dang Nguyen

Master's Theses - Daytona Beach

Composite materials have become one of the leading materials for manufacturing in the aerospace industry today. Compared to "conventional" aerospace metals, composites generally have higher strength-to-weight and stiffness-to-weight ratios, good fatigue and corrosion resistance and reduced parts count. However, like any other material, they also have disadvantages. They are inherently brittle and are thus prone to impact damage. Low energy/velocity impact damage, in particular, can be dangerous because the damage oftentimes goes undetected and can subsequently grow under load. Also known as barely visible impact damage (BVID), this area of concentration focuses on the small-scale damage that may be very …

Investigation Of A Highly Loaded, High Pressure Ratio Axial Turbine Stage For Industrial Applications, Amit Garg

Master's Theses - Daytona Beach

The turbine component of a gas turbine engine is the most costly component due to its complexity, and life requirements, given the harsh environment in which it is required to operate. Minimizing the number of stages can lead to significant savings in terms of development efforts, materials, and serviceable parts. This philosophy has led to a significant increase in the work demanded from the typical stage. In this work, a highly loaded axial turbine stage was designed for high power-output industrial applications using a comprehensive set of investigations, which included parametric studies, throughflow solutions, and 2D airfoil shapes. The design …

Fabrication And Compressive Yield Strength Of Open Cell Corrugated Cellular Solids, Jeong Ho Choi

Master's Theses - Daytona Beach

This thesis studied the fabrication and compressive yield strength of open cell corrugated cellular solids made from type 304 stainless steel. Test samples were made by corrugating woven wire meshes, then laminating these in a high temperature argon environment. Mesh sizes ranging from 9.5 pore/cm (24 pore/in) to 31.5 pore/cm (80 pore/in) with wire diameters ranging from 0.178 mm (0.007 in) to 0.3556 mm (0.014 in) were bonded using lithobraze 925 (Ag-7.5Cu-0.2Li) to create cellular solids having relative densities ranging from 0.0384 to 0.0920. Test samples were then quasistatically compressed to measure the stress-strain response. The stress level at 25% …

Modeling And Slew-Maneuver Control Of A Flexible Spacecraft, Jeremy E. Eckhart

Master's Theses - Daytona Beach

Slew-maneuver control problem is studied for a flexible spacecraft consisting of a rigid main body to which a long flexible appendage is attached. Nonlinear dynamical system models are developed using both distributed parameter modeling and discrete parameter modeling; these models are shown to be equivalent for appropriately chosen system parameters. Lyapunov-based nonlinear feedback controllers are designed for the control of rigid-body motion while suppressing the lowest frequency vibrational mode. In case of large-angle maneuvers, these nonlinear controllers are shown to outperform the linearization-based controllers including the filtered proportional-derivative (PD) controllers as well as the linear quadratic regulator (LQR) controllers. Finally, …

A Computational Study Of Thermo-Fluid Dynamics Of Pulse Detonation Engines, Alberto Davila Urresti

Master's Theses - Daytona Beach

The purpose of this thesis is to use a transient Computational Fluid Dynamics computer code written in FORTRAN 90 for full reaction kinetics, to perform an analysis of the physical processes and chemical phenomena occurring on a single cycle of an ideal Pulse Detonation Engine (PDE) using a stoichiometric mixture of H₂ and O₂. A small zone of high pressure and temperature is used to initiate the detonation wave in the PDE. A simple case with no chemical reactions and the same PDE geometry and “computational spark” is also tested. The speed of the wave relative to …

The Coupling Effect Of Interfacial Adhesion And Tensile Residual Stress On A Thin Membrane Adhered To A Flat Punch, Kai Tak Wan, Lior Kogut

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Adhesion and residual stress play a critical role in the performance and reliability of microdevices, in particular, the cross bridge of RF microswitches. to investigate their combinatorial influences on thin films, an elastic model is constructed for a clamped circular membrane in contact with the planar surface of a rigid cylindrical punch. External force applied to the punch leads to thin film delamination and ultimately 'pull-off' at a critical non-zero contact radius. Characteristic trends of the mechanical responses were obtained for fixed load and fixed grips in terms of pull-off force, punch displacement and contact radius. It is shown that …

Use Of Picosatellites & Rovers For Space Science And Education, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Use of Picosatellites & Rovers for Space Science and Education" from April 1, 2005.

Shape Memory Alloy Applications On Control Of Thermal Buckling, Panel Flutter And Random Vibration Of Composite Panels, Xinyun Guo

Mechanical & Aerospace Engineering Theses & Dissertations

Shape Memory Alloy (SMA) has a unique ability to recover large prestrain (up to 8∼10% elongation for Nitinol, a typical SMA material) completely when the alloy is heated (e.g. aerodynamic heating) above the austenite finish temperature Af. An innovative concept is to utilize the large recovery stress by embedding the prestrained SMA in a traditional fiber-reinforced laminated composite plate, which is called SMA hybrid composite (SMAHC) plate. In this research, static thermal and aerothermal deflections, dynamic panel flutter and random response are investigated for traditional composite plates and SMAHC plates under combined aerodynamic, random and thermal loads by employing nonlinear …

Evaluation Techniques For Determining Damping Mechanisms On Titanium Plates, Kyle S. Allen

Theses and Dissertations

High cycle fatigue (HCF) is the single largest cause of component failure for all modern military gas turbine engines. Hard coatings, such as magnesium aluminate spinel, have been found to provide significant damping properties. Past studies have had difficulties isolating the contributions of these hard coating damping layers from other damping mechanisms. This study explored techniques for assessing the contribution of different damping mechanisms on titanium plates during vibration testing. The study investigated 2nd bend and 2-stripe modes. Two different specimen sizes were tested in both a clamped-free-free-free and free-free-free-free condition. Specimens were tested at varying pressures. Increases in pressure …

Fuel-Air Injection Effects On Combustion In Cavity-Based Flameholders In A Supersonic Flow, William H. Allen Jr.

Theses and Dissertations

The Air Force Research Lab, Propulsion Directorate, Wright-Patterson Air Force Base, Ohio has studied several designs regarding cavity flameholding for supersonic RAMJET (SCRAMJET) applications. The most recent of these studies have concluded that direct injection of ethylene fuel into the aft cavity ramp produced an efficient, robust flameholder given specific freestream condition and fuel flow rate. The main goals of this experiment are: 1) study the effect on combustion of direct fuel and air injection in the main flameholding cavity and 2) characterization of the operational limits (i.e., sustained combustion limits) over a variety of fuel and air flow rates. …

Experimental Study Of The Subsonic Aerodynamics Of A Blended Wing Body Air Vehicle With A Focus On Rapid Technology Assessment, David A. Gebbie

Theses and Dissertations

The subsonic aerodynamic performance of a blended wing body aircraft constructed using selective laser sintering was assessed in the AFIT low-speed wind tunnel. The scaled-down model of a strike tanker aircraft consisted of a shaped fuselage and sweptback wings. The Reynolds number, based on mean wing chord, during testing was on the order of 105 while the Mach number ranged from 0.10 to 0.20. The model evaluation and analysis process included force and moment measurements acquired from a wind tunnel balance, pressure data measured with 8 taps located on the model’s upper surface, a comparison to computational fluid dynamics (CFD) …

Development Of A Higher-Order Upwind Algorithm For Compressible Fluid Flow, Barry A. Croker

Theses and Dissertations

A global fourth-order solution method that incorporates compact differencing with Roe's approximate Riemann solver was investigated. This method was incorporated into a one-dimensional numerical simulation of the compressible Euler equations, and applied to a one-dimensional shock tube problem. The method was also extended to two dimensions, and applied to a two-dimensional shock tube problem and an advecting vortical structure problem on both rectilinear and curvilinear meshes. The results were compared to a third-order Roe scheme and a fourth-order compact difference scheme. An order of accuracy determination showed that it has an order of accuracy somewhere near fourth order, with absolute …

Structures Of Angled Aerated-Liquid Jets In March 1.94 Supersonic Cross Flow, Dion R. Dixon

Theses and Dissertations

The structures of aerated-liquid jets injected into a supersonic crossflow have been studied experimentally. Aerated-liquid injectors with diameters of 0.020", 0.040" and 0.060" were flush mounted on the bottom plate of a supersonic wind tunnel to provide normal and angled injection. Free stream Mach number and temperature were held constant at 1.94 and 500°F, respectively. Water at room temperature was used as the liquid injectant and nitrogen gas used as the aerating gas. Wide ranges of test conditions for injection angle (θ), injector orifice diameter (d₀), jet-to-air momentum flux ratios (q₀), and gas-to-liquid ratios (GLR), were …

A Study In Drag Reduction Of Close Formation Flight Accounting For Flight Control Trim Positions And Dissimilar Formations, Michael T. Morgan

Theses and Dissertations

This thesis further defines the position of greatest fuel savings benefit for the trail aircraft flying in a two-ship formation. The HASC95 vortex lattice code was used for the examination. Investigations of a similar formation of F-16 aircraft and a dissimilar formation of a lead KC-135 aircraft and a trail F-16 aircraft were conducted. The analyses determined the effects of varying airspeed on the optimal position. In addition, flight control surface deflections were taken into account during the analyses. Both investigations trimmed the aircraft in the yaw and roll axes to determine the optimal savings. The similar analysis was conducted …

Full Capability Formation Flight Control, Ryan K. Osteroos

Theses and Dissertations

The subject of automatic formation flight control is of current interest to the development of Unmanned Aerial Vehicles (UAV). Previous control approaches have been refined in this work to allow more robust maneuvering and to include a fourth control parameter. The equations of motion for each aircraft as a point mass, expressed in a wind-axis coordinate system, are coupled into differential equations that model the two aircraft system dynamics. Control laws are developed that include proportional and integral action. Gains are determined based on formation performance. Lead maneuvers are simulated and the controller is gauged on its ability to maintain …

Entropy Generation As A Means Of Examining Continuum Breakdown, Christopher R. Schrock

Theses and Dissertations

To quantify the validity and breakdown of the continuum equations of fluid flow, the concept of entropy generation is examined. This parameter is formulated utilizing statistical mechanics and kinetic theory to avoid the use of equilibrium assumptions. This analysis leads to expressions in terms of energy distribution functions. These results are applied to monatomic and diatomic molecules. A numerical procedure for computing these values using the Direct Simulation Monte Carlo Method (DSMC) is presented. Normal shock waves in argon and nitrogen were simulated at Mach numbers ranging from 1.2 to 10. Results are compared to Navier-Stokes predictions. The Navier-Stokes equations …

Mixing Effects Of Pylon-Aided Fuel Injection Located Upstream Of A Flameholding Cavity In Supersonic Flow, Daniel R. Montes

Theses and Dissertations

The Air Force Research Lab (AFRL), Propulsion Directorate, Wright-Patterson Air Force Base, Ohio is conducting ongoing research into propulsive efficiency in supersonic ramjet (scramjet) technology. One current focus of this research is the usefulness of flameholding cavities implemented in the supersonic hydrocarbon-fueled combustion chamber. Because good mixing and proper cavity-core interaction lead to more efficient combustion, methods of optimizing fuel/air mixing both within and upstream the cavity are investigated. In a cooperative effort with the Air Force Institute of Technology (AFIT), AFRL provided a supersonic wind tunnel outfitted with an existing cavity design. A circular injection port was placed upstream …

Parachute Extraction Of A Generic Store From A C-130; A Cfd Proof Of Concept, Stephen C. Platt

Theses and Dissertations

This thesis encompasses a feasibility analysis of a parachute extracted generic precision guided munition from the cargo bay of a C-130 aircraft in flight. This analysis utilizes the USAF Beggar code and incorporates full physics effects as well as aerodynamic loading assuming an inviscid aircraft and viscous store for a time-accurate solution. Both an immediate and time varying application of the parachute force are utilized as well as two different ordnance body styles at zero and 5 degrees AOA with the store placed on centerline and offset in the cargo bay. The time accurate parachute model is based on empirical …

Maneuver Estimation Model For Relative Orbit Determination, Tara R. Storch

Theses and Dissertations

While the use of relative orbit determination has reduced the difficulties inherent in tracking geosynchronous satellites that are in close proximity, the problem is often compounded by stationkeeping operations or unexpected maneuvers. If a maneuver occurs, observations will no longer fit predicted data, increasing the risk of misidentification and cross-tagging. The goal of this research was to develop a model that will estimate the magnitude, direction, and time of a suspected maneuver performed by a collocated satellite in geosynchronous orbit. Relative motion was modelled using Hill's equations, and least squares estimation was employed to create both a linear non-maneuver model …

A Numerical Analysis For Passive Attitude Stabilization Using A Tethered Balloon On A Gravity Gradient Satellite, Ernest Matias Maramba

Theses and Dissertations

This research effort analyzes the fundamental dynamics governing a satellite with a gravity gradient boom and a tethered balloon. Satellites that use gravity gradient booms for passive attitude control are characterized by undamped pitch oscillations and no roll control. The tethered balloon acts as a high drag device that accounts for the most drag on the satellite system. By attaching a drag device, the system resists rolling movements while also damping oscillations. This could potentially be a cost effective method for increasing satellite stabilization. The goal of this research is to model the dynamics and determine the feasibility of a …

Performance Study Of Staging Variable On Two-Stage-To-Orbit Reusable Launch Vehicles, James K. Nilsen

Theses and Dissertations

The purpose of this research is to investigate the effects of staging variables on Two-Stage-To-Orbit reusable launch vehicles, specifically, the question of what measurable factors play important roles in staging performance. Three different configurations (Rocket-Rocket, Turbojet-Rocket and Turbine Based Combined Cycle-Rocket) were considered. The software, Program to Optimize Simulated Trajectories (POST), was used to analyze these configurations. Vehicle coasting time, staging dynamic pressure and staging Mach number were all varied to determine their influence on the final payload.

Technical Feasibility Of Loitering Lighter-Than-Air-Near-Space Maneuvering Vehicles, Eric R. Moomey

Theses and Dissertations

The near-space region of earth's atmosphere above 20 kilometers altitude is greatly underutilized. Lighter-than-air maneuvering vehicles, or airships, using the principle of buoyancy can take advantage of this region to become potential platforms for precision navigation, environmental monitoring, communication relays, missile warning, surveillance, and weapon delivery. These vehicles purportedly provide persistent coverage over large areas of the earth's surface at substantially lower costs than orbiting satellites. This study investigated the technical requirements to loiter an operational payload within this high altitude region using a lighter-than-air maneuvering platform. A parametric analysis was conducted to identify the critical technologies needed to achieve …