Aerospace Engineering Commons^™

Use Of Dynamic Incidence Angle For Glide Slope Control Of Autonomous Parafoils, Nathan Slegers, Eric Beyer, Mark Costello

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Strickly speaking, most autonomous parafoil and payload aircraft possess only lateral control, achieved by right and left parafoil brake deflection. An innovative new technique to achieve direct longitudinal control through dynamic incidence angle changes is reported. Addition of this extra control channel requires simple rigging changes and an additional servo actuator. The ability of dynamic incidence angle to alter the glide slope of a parafoil and payload aircraft is demonstrated through a flight test program with a micro parafoil system. Results from the flight test program are synthesized and integrated into a 6 degree-of-freedom simulation. The simulation model is subsequently …

Mechanical Characterization Of Spherical Hydrogels: Contact Diameter Measurement, Joshua Bunch

Opportunities for Undergraduate Research Experience Program (OURE)

In an effort to develop new ophthalmic treatments revolving around the ocular lens, the mechanical characteristics of natural ocular lenses and synthetic models must be determined and compared. One mechanical characteristic that is necessary when making comparisons is the variation of contact circle diameter or contact area with varying strains. A method was used in this experiment to measure the varying contact circle diameter of spherical hydrogels at strains up to 15%. This method could be used to estimate the varying contact diameter of other similar materials such as natural ocular lenses if the precision of the method is improved. …

Parallel Machine Tool Development, Adam Bunton

Opportunities for Undergraduate Research Experience Program (OURE)

The work done during this OURE centered on the parallel machining center that is under development by a research group led by Dr. R. Landers. The specific tasks associated with this research involved the design of several parts, documentation of the processes for assembly and operation, procurement of some materials and stock parts, and involvement with experiments with the machine tool. These various aspects are outlined in the following report, with emphasis on the design of components.

The Effects Of Charging By Ultraviolet Light On Granular Lunar Simulant In A Microgravity Environment, Sydney J. Chamberlin, Troy Munro, Sarah Isert, Tracy Garin Savage

Reports and Proposals

No abstract provided.

Concepts For The Nanosat- 5 Satellite Design Competition, Sunil C. Aggarwal

Opportunities for Undergraduate Research Experience Program (OURE)

This paper presents feasible small space satellite missions which are of interest to the U.S. Air Force and can be used to get selected and win the NANOSAT-5 satellite design competition. Some thought on which of these missions can be used by the University of Missouri-Rolla to successfully take part in the competition have also been presented.

United States Air Force Posture Statement 2007, U.S. Air Force

United States Air Force: Publications

Our 2007 Posture Statement articulates the major elements required to fulfill our mission. It reaffirms our commitment to focus our energies on the Global War on Terror; to develop and care for our Airmen and their families; and to recapitalize and modernize our aging aircraft, spacecraft and equipment.

The Complete Management Of Extremity Vascular Injury In A Local Population: A Wartime Report From The 332nd Expeditionary Medical Group/Air Force Theater Hospital, Balad Air Base, Iraq, Michael A. Peck, W. Darrin Clouse, Mitchell W. Cox, Andrew N. Bowser, Jonathan L. Eliason, Donald H. Jenkins, David L. Smith, Todd E. Rasmussen

United States Air Force: Publications

Background: Although the management of vascular injury in coalition forces during Operation Iraqi Freedom has been described, there are no reports on the in-theater treatment of wartime vascular injury in the local population. This study reports the complete management of extremity vascular injury in a local wartime population and illustrates the unique aspects of this cohort and management strategy.

Methods: From September 1, 2004, to August 31, 2006, all vascular injuries treated at the Air Force Theater Hospital (AFTH) in Balad, Iraq, were registered. Those in non-coalition troops were identified and retrospectively reviewed.

Results: During the study …

Impact Of Phlebotomine Sand Flies On U.S. Military Operations At Tallil Air Base, Iraq: 3. Evaluation Of Surveillance Devices For The Collection Of Adult Sand Flies, Douglas A. Burkett, Ronald Knight, James A. Dennett, Van Sherwood, Edgar Rowton, Russell E. Coleman

United States Air Force: Publications

We evaluated the effectiveness of commercially available light traps and sticky traps baited with chemical light sticks for the collection of phlebotomine sand flies. Evaluations were conducted at Tallil Air Base, Iraq, in 2003. In an initial study, a Centers for Disease Control and Prevention (CDC)-style trap with UV bulb collected significantly more sand flies than did an up-draft CDC trap, a standard down-draft CDC trap (STD-CDC), or a sticky strap with a green chemical light stick. In a subsequent study, we found that the addition of chemical light sticks to sticky traps resulted in a significant increase in the …

Control System Design And Simulation Of Spacecraft Formations Via Virtual Formation Approach, Pavan Donepudi

Master's Theses - Daytona Beach

The problem of formation control of multiple spacecraft using the virtual structure approach is studied. The thesis first summarizes the progress made in the area of spacecraft formation control and then provides an overview of the virtual structure method. Modifying earlier established control design techniques, new feedback laws are constructed to control both the rotational and translational motion of a group of spacecraft. Several computer simulations are performed to illustrate the effectiveness of the modified control laws. The ephemeris and attitude data files generated via Matlab are exported to Satellite Tool Kit (STK) to create 3D animations. Various formation scenarios …

Shock-Tube Investigation Of Ignition Delay Times Of Blends Of Methane And Ethane With Oxygen, Brian Christopher Walker

Electronic Theses and Dissertations

The combustion behavior of methane and ethane is important to the study of natural gas and other alternative fuels that are comprised primarily of these two basic hydrocarbons. Understanding the transition from methane-dominated ignition kinetics to ethane-dominated kinetics for increasing levels of ethane is also of fundamental interest toward the understanding of hydrocarbon chemical kinetics. Much research has been conducted on the two fuels individually, but experimental data of the combustion of blends of methane and ethane is limited to ratios that recreate typical natural gas compositions (up to ~20% ethane molar concentration). The goal of this study was to …

An Algorithm For Determining Satellite Attitude By Comparing Physical Feature Models To Edges Detected In Satellite Or Ground-Based Telescope Imagery, Eric Brian Reinhart

Electronic Theses and Dissertations

This thesis discusses the development and performance of an algorithm created to calculate satellite attitude based on the comparison of satellite "physical feature" models to information derived from edge detection performed on imagery of the satellite. The quality of this imagery could range from the very clear, close-up imagery that may come from an unmanned satellite servicing mission to the faint, unclear imagery that may come from a ground-based telescope investigating a satellite anomaly. Satellite "physical feature" models describe where an edge is likely to appear in an image. These are usually defined by physical edges on the structure of …

Mechanical Fastener Pull-Out In Recycled Plastic Lumber, Ryan Dusheke

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of this paper is to present test results for the examination of mechanical fastener pull-out in plastic lumber. The testing was performed on both 1 Od galvanized steel nails, nominally 3" long and 0.148" in diameter, and No. 10 flathead low-carbon steel screws, nominally I" long. l "x6" Trimax plastic lumber, produced by US Plastic Lumber, was used for all testing. Tests were performed in each of the three sides of the boards. To evaluate the performance of the materials in varying conditions, testing was performed at -20°f, room temperature, and 125°f.

Validation Of Conjugate Heat-Transfer Capability For Water- Cooled High-Speed Flows, Bruno R. Fletcher

Master's Theses - Daytona Beach

A FORTRAN conduction/convection heat transfer module named FOGO (meaning fire in Portuguese) has been developed to perform the conjugate heat transfer analyses with existing flow solvers. In this work, FOGO is coupled with TBD and WIND-US flow solvers. WIND-US is a well validated flow solver developed by NASA, AEDC, and Boeing. TBD is a new flow solver developed at ERAU. TBD is verified for laminar stagnation point heat transfer prediction and turbulent flowfield protection. The FOGO module is verified against an exact solution for transient one-dimensional heat flow in a semi-infinite solid

The coupled TBD-FOGO and WIND-FOGO conjugate heat-transfer solvers …

Magnetohydrodynamic Power Generation In A Scramjet Using A Post Combustor Generator, Nathan Lee Mundis

Masters Theses

"A scramjet with a post combustor MHD generator is examined. A quasi-one-dimensional model is developed to calculate the flow path from tip to tail. The model includes losses due to combustion irreversibility, incomplete combustion, chemically reacting flow, friction, MHD losses, and nozzle plume modeling. Flight Mach number, magnetic field strength, gas conductivity, MHD load factor, and MHD generator expansion angle are all varied in order to assess their effects on MHD power generated and thrust lost in the engine. The trends produced through the above variations are summarized in a set of model-fit equations. It is concluded that a post …

Computational Study Of Flow Over Elliptic Airfoils For Rotor/Wing Unmanned Aerial Vehicle Applications, Timothy William Assel

Masters Theses

"The purpose of this study will be to conduct a parametric investigation on the performance of elliptic airfoils for Rotor/Wing Unmanned Aerial Vehicles. The objective of this study is to conduct a two-dimensional, aerodynamic analysis on a various elliptic airfoil parameters, compare the reults of the analysis with theoretical predictions and experimental results, and evaluate handling and performance characteristics of Rotor/Wing UAVs during hover, transition, and forward flight"--Abstract, page iii.

A Guide To The Establishment Of A University Satellite Program, Abbie Marie Stewart

Masters Theses

"The UMR SAT team was formed at the University of Missouri-Rolla to design and build microsatellites. The team competed against ten other universities in the Nanosat 4 competition hosted by the Air Force Office of Scientific Research, the Air Force Research Laboratory, and the American Institute of Aeronautics and Astronautics. This document, written by the Chief Engineer, is a description of the process used by the UMR SAT team to develop a successful satellite program. Included in the document are methods based on systems engineering for developing a mission, a discussion of team organization and recruitment, and lessons learned during …

Modeling Redox-Based Magnetohydrodynamics In Three-Dimensional Microfluidic Channels, Hussameddine S. Kabbani, Aihua Wang, Xiaobing Luo, Shizhi Qian

Mechanical Engineering Faculty Research

RedOx-based magnetohydrodynamic MHD[1] flows in three-dimensional microfluidic channels are investigated theoretically with a coupled mathematical model consisting of the Nernst-Planck equations for the concentrations of ionic species, the local electroneutrality condition for the electric potential, and the Navier-Stokes equations for the flow field. A potential difference is externally applied across two planar electrodes positioned along the opposing walls of a microchannel that is filled with a dilute RedOx electrolyte solution, and a Faradaic current transmitted through the solution results. The entire device is positioned under a magnetic field which can be provided by either a permanent magnet or an electromagnet. …

Electrical Control Of The Thermodiffusive Instability In Premixed Propane–Air Flames, D. L. Wisman, S. D. Marcum, B. N. Ganguly

United States Air Force: Publications

This work focuses upon the effects of DC electric fields on the stability of downward propagating atmospheric pressure premixed propane–air flames under experimental conditions that provide close coupling of the electric field to the flame. With the appropriate electrode geometry, modest applied voltages are shown to drive a stable conical flame first into a wrinkled-laminar flamelet geometry, and then further toward either a highly unstable distributed flamelet regime or a collective oscillation of the flame front. Applied potentials up through +5 kV over a 40-mm gap encompassing the flame front have been used to force the above transition sequence in …

Low-Thrust Control Of A Lunar Orbiter, Nathan Harl

Masters Theses

"This thesis presents a method for maintaining a long-term lunar Sun-synchronous orbit using continuous low-thrust hardware. The control method is developed using optimal control theory, which involves controlling a system through the minimization of a desired cost function"--Abstract, page iii.

Refrigerant-Based Propulsion System For Small Spacecraft, Carl Reiner Seubert

Masters Theses

"The MR SAT spacecraft under development at UMR requires a propulsion system that can be utilized to perform orbital maneuvers and three-axis attitude control to complete its mission objective of conducting spacecraft formation flight. This thesis documents the research, analysis design and development of the cold gas propulsion system that was integrated on the MR SAT spacecraft"--Abstract, page iii.

Manufacturing Of Glass Ribbon Reinforced Transparent Composites Using The Autoclave Process, Josef Patrick Seale

Masters Theses

"Clear transparent panels have many applications ranging from windows on an aircraft to protective safety guards on industrial equipment. Glass ribbon reinforced transparent composites are light weight, load bearing and have a high impact resistance.

A transparent composite is based on the concept of matching the refractive index of the glass ribbon with that of a resin system. It is not necessary that the resin refractive index match the glass refractive index before the cure cycle, only that the refractive indexes match after curing.

Transparent composites have a high impact resistance that would be mechanically ideal for aircraft windows and …

Configuration, Manufacture, Assembly, And Integration Of A University Microsatellite, Lori Ann Ziegler

Masters Theses

"The Space Systems Engineering Team at the University of Missouri-Rolla (UMR), in conjunction with a number of Air Force, NASA, and industry mentors, is working toward the design, development, and launch of its first satellite, UMR SAT (University of Missouri-Rolla Satellite). This thesis documents the design of the UMR SAT satellites, specifically focusing attention on the layout of all components, component boxes designed for containment and protection from electromagnetic interference and the attachment of components inside the boxes and the boxes to the structure. This thesis also discusses the development of UMR SAT with challenges faced in manufacturing and prototyping …

Controls Algorithm For A Satellite Using Earth's Magnetic Field: Orbit Maneuvers And Attitude Positioning, Karthik Ganesh

Electronic Theses and Dissertations

This document describes the design, analysis of Orbit Maneuvers and Attitude Control for NanoSat class satellites, which uses an electro-magnetic force controller which was proposed by the Florida Space Institute (FSI). Orbit Maneuvering and the Attitude Control System (ACS) play a very important role for the success of this mission, as that can allow making the satellite go to the desired orbit as well do the sun pointing of the solar arrays with su¢ cient accuracy to achieve desired power levels. The primary mission would be to attain attitude stabilization using the torque from the coils. This is also used …

Supersonic Crossflow Visualization Using The University Of Central Florida Supersonic Wind Tunnel, Peter Himmerich

Electronic Theses and Dissertations

The next generation air breathing engine that would enable an alternative to conventional air travel or suborbital flight is the supersonic ramjet engine (SCRAM) which requires a highly accelerated rate of fuel mixing and combustion. For this type of engine, one of the improvement opportunities lies in the injection of the fuel into the supersonic flow inside the combustor. In order to determine the flow field that develops when a sonic jet of secondary gas is injected into a supersonic free stream, a dedicated test section was developed which was attached to the existing supersonic wind tunnel at the University …

Determination Of Laser Absorption Coefficients Of Gas Mixtures Using An Ab Initio Md Model, Zhi Liang, Hai-Lung Tsai, Lan Jiang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In an Effort to Study the Laser Induced Dissociation of Gas Mixtures for an Ongoing Research Project on Diamond Thin Film Coating using Multiple Lasers, It is Necessary to Determine the Absorption Coefficient of Laser Energy by CO2 Gas. an Ab Initio Molecular Dynamics (AIMD) Model is Used to Determine the Laser Absorption Coefficient of CO2 Gas as a Function of Laser Wavelength and Gas Temperature. the Translational, Rotational, and Vibration Motions of Molecules Are All Taken into Account in Our Model. the Intra-Molecular Potential Energy is Obtained by Solving the Kohn-Sham Equation. the Projector-Augmented Wave (PAW) Exchange-Correlation Potential Function …

Neural Network Controller Development And Implementation For Spark Ignition Engines With High Egr Levels, Jonathan B. Vance, Atmika Singh, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

Past research has shown substantial reductions in the oxides of nitrogen (NOx) concentrations by using 10% -25% exhaust gas recirculation (EGR) in spark ignition (SI) engines (see Dudek and Sain, 1989). However, under high EGR levels, the engine exhibits strong cyclic dispersion in heat release which may lead to instability and unsatisfactory performance preventing commercial engines to operate with high EGR levels. A neural network (NN)-based output feedback controller is developed to reduce cyclic variation in the heat release under high levels of EGR even when the engine dynamics are unknown by using fuel as the control input. A separate …

Incorporating The Effects Of Magnetic Saturation In A Coupled-Circuit Model Of A Claw-Pole Alternator, Hua Bai, Steven Pekarek, Jerry L. Tichenor, Walter Eversman, Duane J. Buening, Gregory R. Holbrook, Ronald J. Krefta

Electrical and Computer Engineering Faculty Research & Creative Works

A method of representing the effects of magnetic saturation in a coupled-circuit model of a claw-pole alternator is presented. In the approach considered, the airgap flux density produced by each winding is expressed as a function of magnetic operating point. A challenge in the implementation is that the airgap flux densities consist of several significant harmonics, each of which changes at a distinct rate as iron saturates. Despite this complication, it is shown that relatively simple measurements can be used to determine model parameters. The model is implemented in the analysis of several alternator/rectifier systems using a commercial state-model-based circuit …

Near Optimal Output-Feedback Control Of Nonlinear Discrete-Time Systems In Nonstrict Feedback Form With Application To Engines, Peter Shih, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

A novel reinforcement-learning based output-adaptive neural network (NN) controller, also referred as the adaptive-critic NN controller, is developed to track a desired trajectory for a class of complex nonlinear discrete-time systems in the presence of bounded and unknown disturbances. The controller includes an observer for estimating states and the outputs, critic, and two action NNs for generating virtual, and actual control inputs. The critic approximates certain strategic utility function and the action NNs are used to minimize both the strategic utility function and their outputs. All NN weights adapt online towards minimization of a performance index, utilizing gradient-descent based rule. …

Product Family Design Knowledge Representation, Aggregation, Reuse, And Analysis, Jyotirmaya Nanda, Henri Thevenot, Timothy W. Simpson, Robert B. Stone, Matt R. Bohm, Steven B. Shooter

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A flexible information model for systematic development and deployment of product families during all phases of the product realization process is crucial for product-oriented organizations. In current practice, information captured while designing products in a family is often incomplete, unstructured, and is mostly proprietary in nature, making it difficult to index, search, refine, reuse, distribute, browse, aggregate, and analyze knowledge across heterogeneous organizational information systems. To this end, we propose a flexible knowledge management framework to capture, reorganize, and convert both linguistic and parametric product family design information into a unified network, which is called a networked bill of material …

Robust/Optimal Temperature Profile Control Of A High-Speed Aerospace Vehicle Using Neural Networks, Vivek Yadav, Radhakant Padhi, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An approximate dynamic programming (ADP)-based suboptimal neurocontroller to obtain desired temperature for a high-speed aerospace vehicle is synthesized in this paper. a 1-D distributed parameter model of a fin is developed from basic thermal physics principles. ldquoSnapshotrdquo solutions of the dynamics are generated with a simple dynamic inversion-based feedback controller. Empirical basis functions are designed using the ldquoproper orthogonal decompositionrdquo (POD) technique and the snapshot solutions. a low-order nonlinear lumped parameter system to characterize the infinite dimensional system is obtained by carrying out a Galerkin projection. an ADP-based neurocontroller with a dual heuristic programming (DHP) formulation is obtained with a …