Aerospace Engineering Commons^™

On The Nature Of The Flow In A Separated Annular Diffuser, Jason Dunn

Electronic Theses and Dissertations

The combustor-diffuser system remains one of the most studied sections of the turbomachine. Most of these investigations are due to the fact that quite a bit of flow diffusion is required in this section as the high speed flow exits the compressor and must be slowed down to enter the combustor. Like any diffusion process there is the chance for the development of an unfavorable adverse pressure gradient that can lead to flow separation; a cause of drastic losses within a turbine. There are two diffusion processes in the combustor-diffuser system: The flow first exits the compressor into a pre-diffuser, …

Design, Implementation And Validation Of An Attitude Determination Subsystem For Nanosatellites, Mathieu Naslin

Master's Theses - Daytona Beach

The purpose of this study is to design and analyze the accuracy of an attitude determination subsystem for a satellite of the CubeSat class by using low cost sensors. CubeSats are nanosatellites that complies a certain amount of layout criterions described by the California Polytechnic State University. A 3-axis attitude determination platform has been designed with emphasis on the use of low cost, off the shelf sensors. This platform features a sun sensor, a magnetometer and an earth sensor. The principles of observation and the description of the acquisition method are explained. The interfacing of the software package and real …

Synthesis And Characterization Of Birnessite And Cryptomelane Nanostructures In Presence Of Hoffmeister Anions, Marcos A. Cheney, Robin Jose, Arghya Banerjee, Pradip K. Bhowmik, Shizhi Qian, Joseph M. Okoh

Mechanical & Aerospace Engineering Faculty Publications

The effect of Hoffmeister anions Cl(-), SO(4) (2-), and ClO(4) (-) on the structure and morphology of birnessite and cryptomelane-type manganese dioxide nanostructures, produced by the reduction reaction of KMnO(4) and MnSO(4) in aqueous acidic media, was studied. The syntheses were based on the decomposition of aqueous KMnO(4) in presence of HCl for birnessite-type and acidified MnSO4 for cryptomelane-type manganese dioxide under soft hydrothermal conditions. They were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) techniques. XRD patterns show the formation of birnessite for the first synthesis and a mixture of cryptomelane and …

Advances In Controlled Meteorological (Cmet) Balloon Systems, Paul B. Voss

Engineering: Faculty Publications

Over the past five years, small altitude-controlled balloons have been developed for atmospheric research and deployed in several major field campaigns. These Controlled Meteorological (CMET) balloons have been operated at altitudes from sea level to 18,000 feet, at latitudes from 18 to 80 degrees north, and for periods of up to five days. CMET balloons are now sufficiently simple to prepare and launch that they are being mailed to scientific collaborators oversees and operated remotely via satellite, greatly reducing the cost of making in situ atmospheric measurements. The balloon payload has been redesigned around a novel eight-parallel-processor microcontroller that enables …

On-Chip Liquid-Liquid Extraction And Separation Using Digital Microfluidics, Praveen Kunchala

Mechanical and Aerospace Engineering Theses - Archive

In this thesis, on-chip liquid-liquid microextraction and separation using electrowetting on dielectric (EWOD) digital microfluidics was demonstrated by considering room temperature ionic liquid (RTIL) and DI water as two liquid phases, which form immiscible interface with each other. Room temperature ionic liquids (RTILs) have been actively investigated as replacements for the organic solvents and various "task-specific" ionic liquids (TSIL) are being developed which exhibit many attractive properties such as selectivity to specific biomolecules. Liquid-liquid extraction and separation using EWOD digital microfluidic device with model extraction experiments have been demonstrated, one was extraction of organic dye from RTIL (1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf2]) …

A Location Analysis Approach For Military Maintenance Scheduling With Geographically Dispersed Service Areas, Dale L. Overholts Ii, John E. Bell, Marvin A. Arostegui

United States Air Force: Publications

This research uses a two-stage maximal covering location problem (MCLP) model to develop Intercontinental ballistic missile (ICBM) maintenance schedules for the US Air Force. Solutions are compared to actual missile maintenance activities accomplished at F. E. Warren Air Force Base (AFB), Wyoming in May 2005. Sensitivity analysis is performed to determine the impact of altering security response times and the number of security patrol are as on the quality of daily maintenance schedules and personnel usage. Results indicate marked improvement over traditional Air Force scheduling methods. In addition, sensitivity analysis identifies the levels at which the quality and quantity of …

Selecting And Conserving Lands For Biodiversity: The Role Of Remote Sensing, John Wiens, Robert Sutter, Mark Anderson, Jon Blanchard, Analie Barnett, Naikoa Aguilar-Amuchastegui, Chadwick Avery, Stephen Laine

United States Air Force: Publications

A major focus of conservation is on protecting areas to ensure the persistence of biological diversity. Because such areas may be large, not easily accessible, subject to change, and sensitive to the surrounding landscape, remote sensing can be a valuable tool in establishing and managing protected areas. We describe three case studies to illustrate how remote sensing can contribute to setting priorities for conservation actions, monitoring the status of conservation targets, and evaluating the effectiveness of conservation strategies. In the Connecticut River watershed, remote sensing has been used to assess flood regimes and identify key areas of floodplain forests and …

Perchlorate In Wet Deposition Across North America, Srinath Rajagopalan, Todd A. Anderson, Stephen Cox, Greg Harvey, Qiuqiong Cheng, W. Andrew Jackson

United States Air Force: Publications

Natural perchlorate is believed to be of atmospheric origin, yet no systematic study has been conducted to evaluate perchlorate deposition rate and possible seasonal or spatial variations. This study evaluated perchlorate concentrations in weekly composite wet deposition samples acquired through the National Atmospheric DepositionProgramfrom 26 sites across the continental United States, Alaska, and Puerto Rico for a 1-3 year period. Perchlorate concentrations varied from /L to a high of 102 ng/L with a mean of 14.1±13.5 ng/L for the 1578 total samples. The annual perchlorate flux by site ranged from a low of 12.5 (TX) to 157 mg/ha-year (NE) and …

Continuous Control Of Lunar Orbits Via Electric Propulsion, Sunil Aggarwal

Masters Theses

"To find definite answers for the presence of water on the poles of Moon, to facilitate selection of future lunar landing sites and aid in construction of architectural bases, to assist proper lunar resource utilization and to improve lunar gravity models there is a great interest and need for highly accurate, reliable and efficient lunar surface mapping and communication. This thesis is intended to aid in proper selection of orbits for future lunar missions by demonstrating the impact of using electric propulsion on the search space of feasible and useful lunar orbits. The requirements for future lunar mapping and communication …

Guidance, Navigation And Control System For Autonomous Proximity Operations And Docking Of Spacecraft, Daero Lee

Doctoral Dissertations

"This study develops an integrated guidance, navigation and control system for use in autonomous proximity operations and docking of spacecraft. A new approach strategy is proposed based on a modified system developed for use with the International Space Station. It is composed of three "V-bar hops" in the closing transfer phase, two periods of stationkeeping and a "straight line V-bar" approach to the docking port. Guidance, navigation and control functions are independently designed and are then integrated in the form of linear Gaussian-type control. The translational maneuvers are determined through the integration of the state-dependent Riccati equation control formulated using …

Understanding Practical Limits To Heavy Truck Drag Reduction, Drew Landman, Richard Wood, Whitney Seay, John Bledsoe

Mechanical & Aerospace Engineering Faculty Publications

A heavy truck wind tunnel test program is currently underway at the Langley Full Scale Tunnel (LFST). Seven passive drag reducing device configurations have been evaluated on a heavy truck model with the objective of understanding the practical limits to drag reduction achievable on a modern tractor trailer through add-on devices. The configurations tested include side skirts of varying length, a full gap seal, and tapered rear panels. All configurations were evaluated over a nominal 15 degree yaw sweep to establish wind averaged drag coefficients over a broad speed range using SAE J1252. The tests were conducted by first quantifying …

Algorithm Developement For Adaptive Grid Generation Using Galerkin Finite Element Method, Monalkumar Patel

Mechanical and Aerospace Engineering Theses - Archive

The adaptive grid concept is developed in order to achieve more accurate and stable results for the numerical simulations of Partial Differential Equations (PDEs). There are two main types of strategies used for adaptive grids: local refinement by increasing the number of elements (h-refinement) and deforming grids where the number of elements remains fixed (r-refinement). The h-refinement method requires inserting additional elements and nodes in a certain region of the mesh. This significantly affects the software data structure and makes programming more difficult. To maintain the same data structure, the method must delete the same number of nodes from another …

Finite Element Analysis Of Bio-Heat Transfer For Magnetic Fluid Hyperthermia Application, Kamalkumar N. Chauhan

Mechanical and Aerospace Engineering Theses - Archive

Finite Element solution for the multi-region bio-heat Equation is present to model magnetic fluid hyperthermia. This study solves the Penne's two dimensional bio-heat equation using finite element method and develops the thermal behavior of the tumor and healthyportion of the composite tissue using low curie nanoparticles.The inner cylinder represents the tumor tissue containing low Curie temperature nanoparticles. Low Curie temperature nanoparticles generate heat due to the Neel and Brownian relaxation when a magnetic field is applied. The outer cylinder represents the healthy tissue.First part of this thesis discusses about the background related to the nanoparticles heat dissipation and finite element …

Modeling And Simulation Of The Flight Dynamics Of Morphing Wing Aircraft, Borna Obradovic

Mechanical and Aerospace Engineering Theses - Archive

Aircraft with variable wing geometry (morphable wings) are of considerable interest, not only for mission-specific optimization, but for enhanced maneuverability as well. In the nascent field of mini- or micro-Unmanned Aerial Vehicles (UAVs), large and rapid changes in wing geometry are achievable, resulting in significant changes of the dynamics of the vehicle. In this thesis, we present a simulation methodology suitable for such aircraft, accounting for the changes in both the aerodynamic and inertial properties. Due to the complexity of the possible wing configurations, the aerodynamics are simulated using an unsteady Vortex-Lattice approach, solved concurrently with six(+) degrees of freedom …

Direct Numerical Simulation Of Interaction Of Detonation Wave With Homogeneous Isotropic Turbulence, Hari Narayanan Nagarajan

Mechanical and Aerospace Engineering Theses - Archive

The propagation of a shock or detonation wave through a reactive mixture has been the subject of research for over a century. The basic understanding has been shaped by one-dimensional Euler models, namely, those of Chapman-Jouguet and Zeldovich-Neumann-Doring, despite the fact that the detonation front is multidimensional. Other complications include observations of detonation instability, and spinning and galloping detonations. Recent advances in CFD have made it possible to examine detonation waves in great detail. These studies have revealed the complex nature of detonations that were observed experimentally. Some outstanding issues include the influence of inhomogeneities in the reactive mixture on …

Thermo-Mechanical Interaction Within Engineered Tissue During Freezing, Tenok Dehoyos

Mechanical and Aerospace Engineering Theses - Archive

Cryopreservation is the preserving of biological tissues at sub zero temperature. There are many useful applications to cryopreservation such as storing donated organs till they are needed rather than letting them go to waste. When tissues are frozen and thawed, their original functionality and vitality are not usually maintained. It's been shown that when tissue is frozen its mechanical properties change, such as tensile strength and modulus. Each tissue has an extra cellular matrix made up of many collagen fibrils that is responsible for the structural integrity of the tissue. This study is to investigate the structural changes of ECM …

Shear-Driven Liquid Film In A Duct, Magesh Thiruvengadam, B. F. Armaly, J. A. Drallmeier

Mining Engineering Faculty Research & Creative Works

Two-dimensional flow simulations of shear-driven thin liquid film by turbulent air flow in a duct is performed using the Reynolds Averaged Navier Stokes and continuity equations along with the Volume of Fluid (VOF) model that is part of the FLUENT-CFD code. the purpose of this study is to determine the suitability of using this code/model for predicting reported measurements of shear driven liquid film in a duct. Both a laminar and a turbulent flow model were examined for the liquid film flow region to assess their impact on film thickness and velocity. the Low Reynolds number k-ε turbulence model is …

Procedure To Validate Direct Numerical Simulations Of Wall-Bounded Turbulence Including Finite-Rate Reactions, Lian Duan, M. Pino Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper first discusses the constitutive relations and surface catalytic model for direct numerical simulation of wall-bounded turbulence including finite-rate chemistry and gas-surface interaction and then provides a systematic procedure to test the validity of the simulations by dividing the whole problem into different components and testing each component separately. Namely, comparisons against similarity solutions and other established hypersonic boundary-layer solutions are used to test the validity of laminar mean flow with and without gas-phase chemical reactions; comparisons against the analytic solution for the one-dimensional diffusion equation are used to test the validity of the surface catalysis boundary condition; and …

Volume Viscosity In Fluids With Multiple Dissipative Processes, Allan J. Zuckerwar, Robert L. Ash

Mechanical & Aerospace Engineering Faculty Publications

The variational principle of Hamilton is applied to derive the volume viscosity coefficients of a reacting fluid with multiple dissipative processes. The procedure, as in the case of a single dissipative process, yields two dissipative terms in the Navier-Stokes equation: The first is the traditional volume viscosity term, proportional to the dilatational component of the velocity; the second term is proportional to the material time derivative of the pressure gradient. Each dissipative process is assumed to be independent of the others. In a fluid comprising a single constituent with multiple relaxation processes, the relaxation times of the multiple processes are …

The Aerodynamics Of The Knuckleball Pitch: An Experimental Investigation Into The Effects That The Seam And Slow Rotation Have On A Baseball, Michael Patrick Morrissey

Master's Theses (2009 -)

There has been plenty of research on the fluid dynamic effects on different spheres, including sports balls, such as baseballs. Baseball pitches have different velocities, rotation rates and orientations which will cause the baseball to move in different directions. There has also been plenty of research on the aerodynamics of curveballs, but not nearly as much on knuckleballs. The difference between the two is that the knuckleball has a much slower rotation rate and a different initial orientation. This causes the baseball to "knuckle," or moving erratically. This pitch in baseball is one of the hardest to pitch, hit, catch, …

Computational And Experimental Investigation Of The Flow Structure And Vortex Dynamics In The Wake Of A Formula 1 Tire, John Axerio, Gianluca Iaccarino, Emin Issakhanian, Chris Elkins, John Eaton

Mechanical Engineering Faculty Works

The flowfield around a 60% scale stationary Formula 1 tire in contact with the ground in a closed wind tunnel was examined experimentally in order to assess the accuracy of different turbulence modeling techniques. The results of steady RANS and Large Eddy Simulation (LES) were compared with PIV data, which was obtained within the same project. The far wake structure behind the wheel was dominated by two strong counter-rotating vortices. The locations of the vortex cores, extracted from the LES and PIV data as well as computed using different RANS models, showed that the LES predictions are closest to the …

High Temperature Oxidation Behavior Of Nb-20mo-15si-5b-20cr Alloy, Julieta Angelica Ventura

Open Access Theses & Dissertations

Materials for high temperature applications, such as jet engines, gas turbines and turbine blades, require a balanced combination of physical and chemical properties to withstand the aggressive environments in which they are utilized. Some of the properties required are high strength, low density, high melting point and good oxidation resistance at elevated temperatures [1-3]. For this reason, the microstructure and oxidation behavior of the Nb-20Mo-15Si-5B-20Cr alloy (at.%) has been studied as a potential candidate to replace Nickel-based alloys currently used in the aerospace industry.

Short term oxidation (STO) and long term oxidation (LTO) studies have been performed in air for …

Semi-Automated Frame Transformations Using Fft Analysis On 2-D Images, Francisco Javier Osuna

Open Access Theses & Dissertations

Cassini entered Saturn's orbit on July 1, 2004 beginning a four-year exploration of Saturn. In 2008 the mission was extended, and Cassini continues to collect and transmit images and data collected during its mission. In order to accurately interpret images, it is necessary to know the location and orientation of the camera provided the field of view when the image was collected. While the mission managers provide initial estimates of this orientation, scientific analysis requires better estimates than the initial data provided. Navigation is a process for improving the estimation of the true camera pointing vector as determined by features …

Invited Article: Data Analysis Of The Floating Potential Measurement Unit Aboard The International Space Station, Aroh Barjatya, Charles M. Swenson, Donald C. Thompson, Kenneth H. Wright

Publications

We present data from the Floating Potential Measurement Unit (FPMU) that is deployed on the starboard truss of the International Space Station. The FPMU is a suite of instruments capable of redundant measurements of various plasma parameters. The instrument suite consists of a floating potential probe, a wide-sweeping spherical Langmuir probe, a narrow-sweeping cylindrical Langmuir probe, and a plasma impedance probe. This paper gives a brief overview of the instrumentation and the received data quality, and then presents the algorithm used to reduce I-V curves to plasma parameters. Several hours of data are presented from August 5, 2006 and March …

Design Hazard Analysis, And System Level Testing Of A University Propulsion System For Spacecraft Application, Joseph R. Siebert

Masters Theses

"The Missouri Science and Technology Satellite (M-SAT) design team on the campus of the Missouri University of Science and Technology has developed a pair of satellites to perform an autonomous formation flight mission. To enable the mission, a unique cold gas propulsion system was developed which utilizes the refrigerant R-134a as propellant. This thesis details the design process and considerations which led to the propulsion system as integrated into the satellite for the Flight Competition Review of the NS4 competition. The design process described flowed from the mission requirements and program restrictions down through component-level requirements and resulted in a …

An Experimental And Numerical Investigation Of Flapping And Plunging Wings, Taylor A. Swanson

Doctoral Dissertations

"Micro air vehicles, or MAVs, are of current interest for a multitude of uses to which they, being small, unmanned vehicles, are uniquely suited. Among the proposed uses are exploration, reconnaissance, and communications. They can be deployed inside buildings, where their small size, hovering capability, and maneuverability, are important factors. Due to their small size, they operate at low Reynolds numbers where conventional flying mechanisms are not advantageous. Thus, attempts have been made to learn from natural flyers like insects and birds. Natural flight is accomplished by flapping wings, and this idea has been proposed for certain types of MAVs …

Spacecraft Formation Flight At Sun-Earth/Moon Libration Points, Douglas Robert Tolbert

Doctoral Dissertations

"Formations of spacecraft, positioned near the libration points of the Sun- Earth/Moon system, have recently received an increase in interest in response to a variety of mission needs. Specifically, missions such as the Micro Arcsecond X-Ray Imaging Mission (MAXIM), Terrestrial Pathfinder (TPF), Stellar Imager (SI) and the European Space Agency's DARWIN all baseline formations of spacecraft to satisfy mission requirements. Replacing the traditional single spacecraft mission with multiple small spacecraft flying in formation is advantageous for these missions, especially when establishing a virtual aperture. These types of formations allow for higher resolution observations than with a single, conventional aperture. The …

Optimization Of A Strapdown Inertial Navigation System, Mario Ruiz

Open Access Theses & Dissertations

The focus of this Thesis is to find 21 error parameters in a Strapdown Inertial Navigation System (SINS) that would minimize objective functions or error functions to increase accuracy utilizing an optimization algorithm. The algorithm used is goal attainment by Gembiki which is a multi-objective optimization algorithm proven to outperform other optimization methods in terms of efficiency and accuracy over large numbers of problems. Simulations of a noise-free SINS mounted on an aircraft were done in a stationary and on the move scenario to simulate two conditions in which alignment could become necessary. The error parameters to find were sensor …

Modeling And Simulation Of Coaxial Helicopter Rotor Aerodynamics, Murat Gecgel

Mechanical & Aerospace Engineering Theses & Dissertations

A framework is developed for the computational fluid dynamics (CFD) analyses of a series of helicopter rotor flowfields in hover and in forward flight. The methodology is based on the unsteady solutions of the three-dimensional, compressible Navier-Stokes equations recast in a rotating frame of reference. The simulations are carried out by solving the developed mathematical model on hybrid meshes that aim to optimally exploit the benefits of both the structured and the unstructured grids around complex configurations. The computer code is prepared for parallel processing with distributed memory utilization in order to significantly reduce the computational time and the memory …

Formation Feedback Control Of Uav Flight, Stephen Stegall

Doctoral Dissertations and Master's Theses

This thesis is a study of formation control with autonomous unmanned aerial vehicles using the formation as feedback. There is also an investigation of formation methods presenting insight into different algorithms for formations. A rigid formation is achieved using a proportional-derivative virtual structure with a formation feedback controller. There is an emphasis on stick controlled aerodynamics. The rigid formation is verified by a simulation of a longitudinal model. Formation control ideas are presented for rigid formations.