Aerospace Engineering Commons^™

The Need For An Integrated Small Satellite Space Programme: Perspective From The Sumbandila Missions Operations, Pieter Kotze

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Pieter Kotze titled "The need for an integrated small satellite space programme: Perspective from the Sumbandila Missions Operations" from September 9, 2009.

Opportunities For Small Satellite Programs Provided By The Falcon Family Of Launch Vehicles, Spacex

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by SpaceX titled "Opportunities for Small Satellite Programs Provided by the Falcon Family of Launch Vehicles" from September 9, 2009.

Satedu, University Didactic Satellite For Hands-On Training And Easy Access To Low Cost Small Satellite Missions, Esau Vicente Vivas

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Esaú Vicente Vivas titled "SATEDU, University Didactic Satellite for Hands-on Training and Easy Access to Low Cost Small Satellite Missions" from September 9, 2009.

Isc Kosmotras Dnepr Cluster Launches: Large-Scale Opportunities For Small Satellites, Isc Kosmotras

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by the ISC Kosmotras titled "ISC Kosmotras DNEPR Cluster Launches: Large-Scale Opportunities for Small Satellites" from September 9, 2009.

Netherlands Antilles Satellite Orbit Development, Leonardo De Abreu Ladeira

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Leonardo de Abreu Ladeira   titled "Netherlands Antilles Satellite Orbit Development" from September 9, 2009.

Pulsed Film Cooling On A Turbine Blade Leading Edge, James L. Rutledge

Theses and Dissertations

Unsteadiness in gas turbine film cooling jets may arise due to inherent unsteadiness of the flow through an engine or may be induced as a means of flow control. The traditional technique used to evaluate the performance of a steady film cooling scheme is demonstrated to be insufficient for use with unsteady film cooling and is modified to account for the cross coupling of the time dependent adiabatic effectiveness and heat transfer coefficient. The addition of a single term to the traditional steady form of the net heat flux reduction equation with time averaged quantities accounts for the unsteady effects. …

Using Small Satellites For Low Cost Space Education & Science Missions, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Using Small Satellites for Low Cost Space Education & Science Missions" from September 8, 2009.

Itu Radio Regulations Related To N-Gso Satellites, International Telecommunication Union

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by the International Telecommunication Union  titled "ITU Radio Regulations related to N-GSO satellites" from September 8, 2009.

Indian Launch Vehicle Programme: An Overview, Indian Space Research Organization

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Indian Space Research Organization titled "Indian Launch Vehicle Programme: An Overview" from September 6, 2009.

Avoiding Veer-Off Accidents On Contaminated Runways, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Orbital Propagators For Horizon Simulation Framework, Mitra Farahmand

Master's Theses

This thesis describes the models of four common orbital propagators and outlines the process of integrating them into the Horizon Simulation Framework (HSF). The results of the Two-Body, J2, and J4 propagators from the HSF are then compared against the outcomes of these propagators in MATLAB and Satellite Toolkit (STK). The MATLAB algorithms verify the functionality of the propagators and determine the accuracy of the HSF implementation. The compassion against STK validates the formulation of the HSF propagators. In order to equip the HSF with a more precise means of orbit determination, adding the Simplified General Perturbations 4 (SGP4) propagator …

The Navigation Potential Of Ground Feature Tracking, Guner Mutlu

Theses and Dissertations

This research effort examines the reduction of error in inertial navigation aided by vision. This is part of an effort focused on navigation in a GPS denied environment. The navigation concept examined here consists of two main steps. First, extract the position of a tracked ground object using vision and geo-locate it in 3 dimensional navigation frame. In this first step multiple positions of the UAV are assumed known; think of a synthetic aperture. The only information about the tracked ground objects/features is the unit vector that points to the objects from the center of the camera. Two such vectors …

Phase Change Mechanisms During Femtosecond Laser Pulse Train Ablation Of Nickel Thin Films, Xin Li, Lan Jiang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The mechanisms of nickel thin films irradiated by femtosecond laser pulse trains are studied by a model using molecular dynamics simulations and two-temperature model. It is found that the pulse train technology can change energy transport and corresponding phase change processes. Compared with single pulse ablation at the same total fluence, the pulse trains lead to (1) lower ablation rate with more and smaller uniform nanoparticles, (2) higher film surface temperatures and longer thermalization time, (3) much lower electron thermal conductivity that can further control heat-affected zone, (4) significantly smaller film compressive stresses and tensile stresses which reduce microcracks, and …

Rayleigh Flow Of Two-Phase Nitrous Oxide As A Hybrid Rocket Nozzle Coolant, Lauren May Nelson

Master's Theses

The Mechanical Engineering Department at California Polytechnic State University in San Luis Obispo currently maintains a lab-scale hybrid rocket motor for which nitrous oxide is utilized as the oxidizer in the combustion system. Because of its availability, the same two-phase (gas and liquid) nitrous oxide that is used in the combustion system is also routed around the throat of the hybrid rocket’s converging-diverging nozzle as a coolant. While this coolant system has proven effective empirically in previous tests, the physics behind the flow of the two-phase mixture is largely unexplained. This thesis provides a method for predicting some of its …

Spacecraft Attitude Control (Mission Design), Norhizam Hamzah

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Norhizam Hamzah titled "Spacecraft Attitude Control (Mission Design)" from September 10, 2009.

Turkish Satellite Technology Applications For Sustainable Development And Capacity Building, Burcu Dikmen

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Burcu Dikmen titled "Turkish Satellite Technology Applications for Sustainable Development and Capacity Building" from September 8, 2009.

The Role Of Education In Small Satellite Programmes, Olaleye Salu

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Olaleye Salu titled "The Role of Education in Small Satellite Programmes" from September 9, 2009.

Unmanned Aircraft System Propulsion Systems Technology Survey, Christopher Griffis, Timothy Wilson, Jeffrey Schneider, Peter Pierpont

Publications

This technology survey is an investigation of various propulsion systems used in Unmanned Aircraft Systems (UAS). Discussed are existing and near-future propulsion mechanisms of UAS, such as reciprocating piston engines, Wankel rotary engines, gas turbine engines, rocket-powered systems, electric motors, and battery-based systems. Also discussed are systems that use proton exchange membrane fuel cells, photovoltaics, ultracapacitors, and propellers. Each system is described in reference to a larger conceptual framework, with instances and profiles of existing UAS employing the system being described. Advantages and disadvantages of each type of propulsion system are identified along with associated technical issues and their respective …

Heavy-Fueled Intermittent Ignition Engines: Technical Issues, Jeffrey Arthur Schneider, Timothy Wilson, Christopher Griffis, Peter Pierpont

Publications

This report contains an overview of the technology and engineering issues with nonturbine heavy-fueled engines for general aviation aircraft and Unmanned Aircraft Systems. In recent years, interest in these types of engines has grown, partly due to the cost, safety, and worldwide availability of gasoline fuels. Within 3 to 5 years, up to five engines will seek Federal Aviation Administration certification as heavy-fuel powerplants. Although there has been some progress, there is no universal standard for certification of these engines (under Title 14 Code of Federal Regulations (CFR) Part 33), or their installation into normal category fixed-wing aircraft or rotorcraft …

The Interaction Between Throttling And Thrust Vectoring Of An Annular Aerospike Nozzle, David Michael Imbaratto

Master's Theses

Applied research and testing has been conducted at the Cal Poly San Luis Obispo High-pressure Blow-Down facility to study the affects of throttling in a thrust-vectored aerospike nozzle. This study supports the ongoing research at Cal Poly to effectively thrust vector a hybrid rocket motor. Such thrust vectoring is achieved by small secondary ports in the nozzle body that are perpendicular to the main nozzle. The testing conducted included characterizing and comparing the performance of a straight aerospike nozzle to that of a thrust-vectored aerospike nozzle. Throttling effects on the aerospike nozzle in an unvectored and in a vectored configuration …

Formation Flight Of Earth Satellites On Kam Tori, Christopher T. Craft

Theses and Dissertations

Kolmogorov, Arnold and Moser (KAM) theory provides that orbits of satellites whose dynamics are representable by an integrable Hamiltonian plus a small, real perturbation lie on tori in phase space and remain on the KAM tori for all time, unless acted upon by a non-conservative force. A refined technique for constructing KAM tori for Earth-orbiting satellites is developed and implemented using numerically integrated orbital data for hypothetical satellites and involving methods of Fourier analysis and spectral decomposition. Definition of satellite formations on the KAM tori is performed and analyses conducted to investigate both constellations with large separations and clusters with …

Efficient Simulation Of Fluid Flow, David Hannasch, Monika Neda

Undergraduate Research Opportunities Program (UROP)

We are computationally investigating fluid flow models for physically correct predictions of flow structures. Models based on the idea of filtering the small scales/structures and also the Navier-Stokes equations which are the fundamental equations of fluid flow, are numerically solved via the continuous finite element method. Crank-Nicolson and fractional-step theta scheme are used for the discretization of the time derivative, while the Taylor-Hood and Mini elements are used for the discretization is space. The effectiveness of these numerical discretizations in time and space are examined by studying the accuracy of fluid characteristics, such as drag, lift and pressure drop.

Evaluation Of Direct Diode Laser Deposited Stainless Steel 316l On 4340 Steel Substrate For Aircraft Landing Gear Application, Tian Fu, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Zhiqiang Fan, Syamala Rani Pulugurtha, Jianzhong Ruan, Hsin-Nan Chou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

300M steel is used extensively for aircraft landing gears because of its high strength, ductility and toughness. However, like other high-strength steels, 300M steel is vulnerable to corrosion fatigue and stress corrosion cracking, which can lead to catastrophic consequences in the landing gear. Stainless steels offer a combination of corrosion, wear, and fatigue properties. But for an aircraft landing gear application a higher surface hardness is required. A laser cladding process with fast heating and cooling rates can improve the surface hardness. AISI 4340 steel is used as a lower cost alternative to 300M due to its similar composition. In …

Development Of A High Performance Micropropulsion System For Cubesats, Christopher Lorian Biddy

Master's Theses

Picosatellites are defined as satellites with a mass between 0.1 and 1kg (Miniaturized satellite). Picosatellites are typically designed to work together or function in formations (Miniaturized satellite). A specific type of Picosatellite known as CubeSats were introduced in 1999 and since then have increased in popularity so that there are now over 80 CubeSat programs around the world. CubeSats are defined as cubic units 10cm on each side and no more than 1kg in mass. CubeSats are required to conform to the CubeSat Standard created by California Polytechnic State University and Stanford University and be compatible with Cal Poly’s P-POD …

Developing Abrasion Test Standards For Evaluating Lunar Construction Materials, Ryan L. Kobrick, David M. Klaus, Kenneth W. Street

Publications

Operational issues encountered by Apollo astronauts relating to lunar dust were catalogued, including material abrasion that resulted in scratches and wear on spacesuit components, ultimately impacting visibility, joint mobility and pressure retention. Standard methods are being developed to measure abrasive wear on candidate construction materials to be used for spacesuits, spacecraft, and robotics. Calibration tests were conducted using a standard diamond stylus scratch tip on the common spacecraft structure aluminum, Al 6061-T6. Custom tips were fabricated from terrestrial counterparts of lunar minerals for scratching Al 6061-T6 and comparing to standard diamond scratches. Considerations are offered for how to apply standards …

Magnetic Stabilization Of Nadir-Pointing Small Satellites, Chau T. Ton

Master's Theses - Daytona Beach

Since magnetic control systems are relatively lightweight, require low power and are inexpensive, they are attractive for small, inexpensive satellites in low Earth orbits. In this thesis we present averaging-based feedback control laws that achieve three-axis stabilized nadir-pointing attitude. Two types of nonlinear feedback control laws are proposed: full-state feedback and passivity-based feedback. Full-state feedback uses the attitude and angular velocity measurements to regulate the spacecrafts dynamics. Passivity-based feedback uses the attitude measurement and doesn’t require the rate sensors. The control laws are tested using two magnetic field models: the tilted dipole model and the International Geomagnetic Reference Field (IGRF) …

An Intelligible Software (Cfa) Approach For Fiber-Reinforced Laminate Failure Analysis Including A Piecewise Representation Of The Tsai-Wu Failure Criterion Using Excel And Matlab, Ryan C. Schmidt

Master's Theses - Daytona Beach

Present generations rely heavily on the use of petroleum as their primary means of transportation. As the cost of petroleum continues to escalate, the need for lightweight structures for vehicle applications becomes more evident. The ability to engineer materials so that they possess desired application specific properties and characteristics has made tremendous progress in the past century. Consequently, the use of these composite materials for aircraft weight reduction has been investigated for decades.

The aerospace industry often uses composite materials to make a laminated composite structure where each constituent ply of the laminate has its own material properties. This anisotropic …

Section Abstracts: Aeronautical And Aerospace Sciences

Virginia Journal of Science

Abstracts of the Aeronautical and Aerospace Sciences Section for the 87th Annual Meeting of the Virginia Academy of Science, May 27-29, 2009, Virginia Commonwealth University, Richmond, Virginia.

Stability Analysis, Modeling, Simulation And Experimental Testing Of An Ems Maglev System With Structural Flexibility, Aravind M. Hanasoge

Mechanical & Aerospace Engineering Theses & Dissertations

Vehicle-guideway interaction studies of Magnetically Levitated (Maglev) vehicles indicate that structural flexibility can adversely affect the overall stability and performance of such systems. This is one of the reasons why guideways are generally made very rigid. This in turn leads to increased cost of the overall system since guideway construction forms a significant portion of the overall cost. In this dissertation, the influence of structural flexibility on the stability of Electromagnetic Suspension (EMS) Maglev systems is studied. It is shown how inherently unstable and flexible structure EMS Maglev systems can achieve guaranteed stability by using collocated actuators and sensors, along …

On-Board Orbit Determination And 3-Axis Attitude Determination For Picosatellite Applications, John Arthur Bowen

Master's Theses

This thesis outlines an orbit determination and 3-axis attitude determination system for use on orbit as applicable to 1U CubeSats and other picosatellites. The constraints imposed by the CubeSat form factor led to the need for a simple configuration and relaxed accuracy requirements. To design a system within the tight mass, volume, and power constraints inherent to CubeSats, a balance between hardware complexity, software complexity and accuracy is sought. The proposed solution consists of a simple orbit propagator, magnetometers with a magnetic field look-up table, Sun sensors with an analytic Sun direction model, and the TRIAD method to combine vector …