Aerospace Engineering Commons^™

Improved Methodologies For Maneuver Design Of Aircraft Stability And Control Simulations, Adam Jirásek, Tiger L. Jeans, Mathew Martenson, Russell M. Cummings, Keith Bergeron

Aerospace Engineering

With many modern fighter aircraft experiencing unpredicted flight dynamics during flight tests, recent research has focused on developing methodologies for incorporating computational fluid dynamics into the aircraft development process. The goal of this approach is to identify configurations susceptible to stability and control issues early in the design process. Previous research has primarily focused on full aircraft configurations, however, to increase the rate of development the current study focused on a two-dimensional NACA0012 airfoil. The two-dimensional NACA0012 airfoil has the advantage of reducing the computational cost by orders of magnitude compared to full scale aircraft simulations, while still providing complicated …

Parameter Estimation Of Fundamental Technical Aircraft Information Applied To Aircraft Performance, Mike Vallone, Robert A. Mcdonald

Aerospace Engineering

Inverse problems can be applied to aircraft in many areas. One of the disciplines within the aerospace industry with the most openly published data is in the area of aircraft performance. Many aircraft manufacturers publish performance claims, flight manuals and Standard Aircraft Characteristic (SAC) charts without any mention of the more fundamental technical information such as C_D0. With accurate tools, generalized aircraft models and a few curve-fitting techniques, it is possible to evaluate vehicle performance and estimate these technical parameters.

With this goal a program has been written in Matlab to calculate the fundamental information behind a …

Designing A Green Aircraft: Cal Poly's 2009 Undergraduate Aircraft Designs, Robert A. Mcdonald, Bruce Wright

Aerospace Engineering

The Cal Poly senior design class submitted six designs this year in response to the 2009 Undergraduate Team Aircraft Design Competition. This paper summarizes our experiences teaching design through this RFP and brings the student's insights together.

Conceptual Design Of An Environmentally Responsible 150-Passenger Commercial Aircraft, Natalie R. Smith, Bryan Blessing, James Dixon, Allen Mackey, Gregory Mckenzie, Robert A. Mcdonald, Bruce Wright

Aerospace Engineering

Verde is an environmentally responsible commercial transport seating 150 dual-class passengers, designed in response to the 2008-2009 Request for Proposal from the American Institute of Aeronautics and Astronautics Undergraduate Team Aircraft Design Competition. While the airline industry faces increasing pressures from the cost of fuel and the responsibility of environmental impact, the next generation of this aircraft class must operate more efficiently and address those environmental needs. Therefore, all design decisions for Verde focused first on reducing fuel burn, second on reducing emissions, then noise, and finally on maintaining flyaway cost, airport integration, and passenger comfort. The final design utilizes …

Lift Superposition And Aerodynamic Twist Optimization For Achieving Desired Lift Distributions, Kevin A. Lane, David D. Marshall, Robert A. Mcdonald

Aerospace Engineering

A method for achieving an arbitrary lift distribution with an arbitrary planform is presented. This is accomplished through optimizing aerodynamic twist for a given number of either known airfoils or airfoils to be designed. The spanwise locations of these airfoils are optimized to get as close to the desired lift distribution as possible. Airfoils are linearly interpolated between these points. After aerodynamic twist, the planform is twisted geometrically using radial basis functions to model the twist distribution. The aerodynamic influence of each twist distribution is determined and all are superimposed to determine the function weights of each twist function, yielding …

A Three Dimensional Vortex Particle-Panel Method For Modeling Propulsion-Airframe Interaction, Jacob S. Calabretta, Robert A. Mcdonald

Aerospace Engineering

The panel code has been a pivotal tool for aerodynamic simulations for decades, today providing users with quick solutions without the necessity of a volume grid. Unfortunately, the panel code also carries with it some inherent shortcomings when compared with other methods. One such weakness is its inability to account for any work done on or by the system in question. This paper proposes a method to address this issue by combining vortex particles with a panel code, and using them to model the work effects of a propeller or engine. While the proposed model is still a work in …

Computational And Experimental Comparison Of A Powered Lift, Upper Surface Blowing Configuration, Jay Marcos, David D. Marshall

Aerospace Engineering

This paper demonstrates the use of CFD as a validation tool for wind tunnel data on 2D high lift airfoil with a 3D engine performed by Georgia Tech Research Institute. Results of this validation will assist in determining the appropriate turbulence models, boundary conditions, mesh characteristics and other CFD modeling techniques necessary to capture the complicated flow physics associated with the coupling of circulation control wings and engine exhaust flows. It was found that grid issues and the two-equation turbulence model, k-ε, over predicted lift as blowing momentum increases even with the additional complexity of having an over the wing …

Design And Performance Of Circulation Control Flap Systems, Rory M. Golden, David D. Marshall

Aerospace Engineering

The design of circulation control (CC) dual radius flap systems were investigated to characterize the parameters that make up the flap surface to offer further knowledge into the CC field of study. Multiple dual radius flap geometries, along with variants, were developed by varying specific flap parameters from a baseline configuration that had previously developed. The aerodynamics of the different flap geometries were analyzed using two-dimensional CFD. This research will explore the design of CC pneumatic flap systems to improve the performance of existing CC flap configurations, and provide insight into the characteristics of the CC flap geometry.

Towards Efficient Viscous Modeling Based On Cartesian Methods For Automated Flow Simulation, Patrick Hu, Hongwu Zhao, Ramji Kamakoti, Nagendra Dittakavi, Liping Xue, Kan Ni, Shaolin Mao, David D. Marshall, Michael Aftosmis

Aerospace Engineering

The advanced Computational Fluid Dynamics (CFD) techniques that address the current limitations of Cartesian-based Navier-Stokes CFD schemes are explored in current investigation. Three promising methods of implementing improved wall boundary conditions are applied: (1) the enhanced diamond path stencil approach, (2) the reformulated extended extrapolation boundary condition, and (3) the ghost cell method. Several initial testing cases have been conducted with all these three boundary conditions, including the flow past a circular cylinder, flow past a flat plate at different inclined angles and flow past an AGARD RAE2822 airfoil. All the results show the effectiveness of these boundary conditions in …

Inverse Airfoil Design Utilizing Cst Parameterization, Kevin A. Lane, David D. Marshall

Aerospace Engineering

An inverse airfoil design process is presented that makes use of the CST parameterization method. The CST method is very powerful in that it can easily represent any airfoil shape within the entire design space of smooth airfoils. This makes it an ideal modeling technique for an inverse design process because accurate airfoil geometry treatment is required. The downfall of some inverse design processes is that they do not accurately handle the leading edge region due to large flow gradients and high curvature distributions. One way to account for this is by representing airfoils with smooth analytic functions, such as …

Assessing The V2-F Turbulence Models For Circulation Control Applications, Travis M. Storm, David D. Marshall

Aerospace Engineering

This paper explores the applicability of several variations of the v²-f turbulence model to circulation control flows. The effects of modifying the model to capture nonlinear eddy viscosity effects and streamline curvature effects are assessed. Results indicate that the v²-f turbulence model is capable producing more physically accurate results for circulation control flow fields than common modern turbulence modeling techniques.

Numerical Investigation Of Aeroelastic Mode Distribution For Aircraft Wing Model In Subsonic Air Flow, Marianna A. Shubov, Stephen B. Wineberg, Robert Holt

Mathematics & Statistics

In this paper, the numerical results on two problems originated in aircraft wing modeling have been presented. The first problem is concerned with the approximation to the set of the aeroelastic modes, which are the eigenvalues of a certain boundary-value problem. The affirmative answer is given to the following question: can the leading asymptotical terms in the analytical formulas be used as reasonably accurate description of the aeroelastic modes? The positive answer means that these leading terms can be used by engineers for practical calculations. The second problem is concerned with the flutter phenomena in aircraft wings in a subsonic, …

Multiscale Transformation Field Analysis Of Progressive Damage In Fibrous Laminates, Yehia Bahei-El-Din, Ritesh Khire, Prabhat Hajela

Centre for Advanced Materials

As part of an ongoing effort to model uncertainty propagation across multiple scales in fibrous laminates, this paper presents a deterministic transformation field analysis for modeling damage progression under membrane forces and bending moments. In this approach, equivalent eigenstresses are computed in the phases and/or plies such that their respective stress components that satisfy the underlying failure criteria are reduced to zero. Superposition of the solutions found for the undamaged laminate under applied loads and under the eigenstress field provide the entire response. Failure criteria are based on stress averages in the fiber and matrix. Damage mechanisms considered are frictional …

Modified Sandwich Structures For Improved Impact Resistance Of Wind Turbine Blades, Yehia Bahei-El-Din, Mostafa Shazly, I. El-Habbal, Y. Elbahy

Centre for Advanced Materials

Wind turbine blades are susceptible to damage due to fatigue as well as impact by flying objects and parts broken off failed blades of nearby wind towers. Localized, permanent compression of the foam core and delamination of the fibrous composite face sheets are typical damage modes and can lead to progressive structural failure. Sandwich structures modified by inclusion of flexible polyurethane (PU) layers within the cross section are examined under both impact and dynamic loads. Finite element models of sandwich structures with conventional and modified designs show that sandwich designs modified with PU interlayes exhibit reduced foam core crushing and …

Spacecraft Coating-Induced Charging: A Materials And Modeling Study Of Environmental Extreme, Michelle M. Donegan, Jennifer L. Sample, John R. Dennison, R. Hoffman

All Physics Faculty Publications

As mankind reaches to explore extreme environments in space, the application of ceramics surface coatings is increasing. The 2005 mission concept for Solar Probe used a unique design to achieve the necessary thermal control for a very close approach to the solar corona, including the use of a highly refractory, electrically insulating ceramic coating over a carbon-carbon composite heat shield. The proposed trajectory takes the spacecraft from a Jovian fly-by to within 4 solar radii of the Sun, spanning 5 orders of magnitude in solar radiation and solar wind plasma density as well as spacecraft temperatures from <100 K to >2000 K. Using …

Funboe (Follow-Up Nucleate Boiling On-Flight Experiment), Getaway Special Team 2010

Education and Outreach

No abstract provided.

Gravitational Effects On Thin-Wire Subcooled Nucleate Boiling Dynamics, Justin Koeln, Andrew Fassmann, Troy Munro, Rob Barnett

Education and Outreach

No abstract provided.

Gravitational Effects On Thin-Wire Subcooled Nucleate Boiling Dynamics, Justin Koeln, Andrew Fassmann, Troy Munro, Rob Barnett

Presentations

No abstract provided.

In Search Of Something More: My Path Towards International Service-Learning In Engineering Education, Margaret Pinnell

Mechanical and Aerospace Engineering Faculty Publications

My personal and professional travels led me toward global education, in particular the University of Dayton (UD) program Engineers in Technical Humanitarian Opportunities for Service-Learning (ETHOS). I do not believe I ever intended to become part of an international engineering education program. In fact, I think the international piece was just a bonus. What really drew me to the ETHOS program was what initially draws our students to the program - a desire to "help" people. In order for the reader to understand how I ended up being involved in global education through the ETHOS program, I must first explain …

On The Benefits Of In-Flight System Identification For Autonomous Airdrop Systems, Michael Ward, Mark Costello, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

A unique feature of airdrop systems is the inherent and large variability in flight dynamic characteristics. The same physical article dropped on two different occasions will exhibit significantly different dynamic response. The problem only becomes worse for different test articles. Control systems for autonomous airdrop systems explicitly or implicitly assume knowledge of the flight dynamic characteristics in some way, shape, or form. A question facing autonomous airdrop designers is whether to use precomputed dynamic characteristics inside the control law, or to compute the needed flight dynamic characteristics in-flight and subsequently employ them in the control law. This paper establishes conditions …

Efficient Tether Dynamic Model Formulation Using Recursive Rigid-Body Dynamics, Brad Hembree, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

A computationally efficient discrete model for low-strain tethers used in many engineering applications is developed without the use of elastic elements. The tether is modelled using N links, with each link treated as a body of revolution where it is assumed the tether spin is negligible to the dynamics, resulting in each link having only two degrees of freedom. A recursive algorithm is developed for the dynamic equations, with the solution procedure being an order N method requiring only a 2 x 2 matrix inversion, resulting in approximately half the computations of the general recursive algorithm. A comparison between the …

Challenges Students Face When Solving Open - Ended Problems, Nikos J. Mourtos

Faculty Publications

Several core aerospace engineering courses at SJSU have been re-designed in an effort to help students develop problem-solving skills. This re-design includes (a) explicit definition of skills and attributes students need to develop to become capable problem-solvers, (b) inclusion of open-ended problems in each of several key, junior-level, core courses, (c) coaching students in the use of Wood’s Problem-Solving Methodology, and (d) development of rubrics to evaluate student performance at each step of this methodology. The paper discusses the application of this process and, in particular, it presents an assessment of student performance in two courses: fluid mechanics and aerodynamics. …

Mixi Thruster Tungsten And Thoriated Tungsten Testing, Jesse R. Miller

Aerospace Engineering

The purpose of this project is to build and evaluate a tungsten filament cathode for the 3-cm Miniature Xenon Ion (MiXI) thruster. The filament is to be used for future tests within the CP 3-cm MiXI and thoriated tungsten is to be examined as a possible alternative. No testing of these filaments was conducted, but the preparatory work has been conducted for future testing.

The Gas Team And Nasa (Aka Boil, Boil, Toil And Trouble), Get Away Special Team 2010

Education and Outreach

No abstract provided.

Effects Of Canopy-Payload Relative Motion On Control Of Autonomous Parafoils, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

An 8 degree-of-freedom model is developed that accurately models relative pitching and yawing motion of a payload with respect to a parafoil. Constraint forces and moments are found analytically rather than using artificial constraint stabilization. A turn rate controller common in precision placement algorithms is used to demonstrate that relative yawing motion of the payload can result in persistent oscillations of the system. A model neglecting relative payload yawing failed to predict the same oscillations. It is shown that persistent oscillations can be eliminated by reduction of feedback gains; however, resulting tracking performance is poor. A reduced order linear model …

Aircraft Conceptual Design - An Adaptable Parametric Sizing Methodology, Gary John Coleman

Mechanical and Aerospace Engineering Dissertations - Archive

Aerospace is a maturing industry with successful and refined baselines which work well for traditional baseline missions, markets and technologies. However, when new markets (space tourism) or new constrains (environmental) or new technologies (composite, natural laminar flow) emerge, the conventional solution is not necessarily best for the new situation. Which begs the question "how does a design team quickly screen and compare novel solutions to conventional solutions for new aerospace challenges?" The answer is rapid and flexible conceptual design Parametric Sizing. In the product design life-cycle, parametric sizing is the first step in screening the total vehicle in terms of …

Constrained Dynamics Approach For Motion Synchronization And Consensus, Divya Bhatia

Mechanical and Aerospace Engineering Theses - Archive

In this research we propose to develop constrained dynamical systems based stable attitude synchronization, consensus and tracking (SCT) control laws for the formation of rigid bodies. The generalized constrained dynamics Equations of Motion (EOM) are developed utilizing constraint potential energy functions that enforce communication constraints. Euler-Lagrange equations are employed to develop the non-linear constrained dynamics of multiple vehicle systems. The constraint potential energy is synthesized based on a graph theoretic formulation of the vehicle-vehicle communication. Constraint stabilization is achieved via Baumgarte's method. The performance of these constrained dynamics based formations is evaluated for bounded control authority.The above method has been …

Ideal Cycle Analysis Of A Regenerative Pulse Detonation Engine For Power Production, Rafaela Bellini

Mechanical and Aerospace Engineering Dissertations - Archive

Over the last few decades, considerable research has been focused on pulse detonation engines (PDEs) as a promising replacement for existing propulsion systems with potential applications in aircraft ranging from the subsonic to the lower hypersonic regimes. On the other hand, very little attention has been given to applying detonation for electric power production. One method for assessing the performance of a PDE is through thermodynamic cycle analysis. Earlier works have adopted a thermodynamic cycle for the PDE that was based on the assumption that the detonation process could be approximated by a constant volume process, called the Humphrey cycle. …

Stress Analysis Of Laminated Composite Beam With I-Section, Jitesh Cherukkadu Parambil

Mechanical and Aerospace Engineering Theses - Archive

The advantage of material properties and flexibility of choosing material have made composite materials a primary preference for structural application. Unlike isotropic materials, the parametric study of composite beams for optimized design is complicated due to high number of parameters involved in designing like lay-up sequence, and layer configuration. Moreover, the limitations of FEA techniques in designing have created a need for an analytical closed-form solution for stress analysis of laminated composite beams. The objective of this study focuses on the development of an analytical method for stress analysis of composite I-beam. This method includes the structural response due to …

Solution To Multi Term Boltzmann Equation For Plasma Assisted Combustion, Antriksh Luthra

Mechanical and Aerospace Engineering Theses - Archive

Plasma assisted ignition and combustion (PAIC) is a technology where plasma is generated by high voltage, nano second pulse duration and high repetitive rate pulses. The high reduced electric field during the pulse allows efficient electronic excitation and molecular dissociation, thereby generating a pool of chemically active radical species. This speeds up the reaction process needed to generate a high speed flame a very high energy is liberated though the mode of excited electrons to the neutral molecules of the fuel in such a way that the energy sent should not go in momentum transfer but it should be so …