Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 7261 - 7290 of 11196

Full-Text Articles in Aerospace Engineering

Incorporating Industry Needs Into The Development Of An Undergraduate Degree In Commercial Space Operations, Yash Bipinchandra Mehta Apr 2013

Incorporating Industry Needs Into The Development Of An Undergraduate Degree In Commercial Space Operations, Yash Bipinchandra Mehta

Doctoral Dissertations and Master's Theses

The rapid expansion of the commercial space industry, not unlike the aviation industry in the early 20th century, has left the industry facing unique challenges. As companies continue to expand, the need for a well-trained workforce becomes critical. The needed workforce must be specifically educated to enter the commercial space industry at graduation. To have a successful industry, a workforce must be trained in skills that meet the industry's needs. In that regard, this study consisted of a survey of leaders in the commercial space industry to identify the different skill-sets sought by the industry. The results of the …

Go to article

An Investigation To Advance The Technology Readiness Level Of The Centaur Derived On-Orbit Propellant Storage And Transfer System, Nathan L. Silvernail Apr 2013

An Investigation To Advance The Technology Readiness Level Of The Centaur Derived On-Orbit Propellant Storage And Transfer System, Nathan L. Silvernail

Doctoral Dissertations and Master's Theses

This research was carried out in collaboration with the United Launch Alliance (ULA), to advance an innovative Centaur-based on-orbit propellant storage and transfer system that takes advantage of rotational settling to simplify Fluid Management (FM), specifically enabling settled fluid transfer between two tanks and settled pressure control. This research consists of two specific objectives: (1) technique and process validation and (2) computational model development. In order to raise the Technology Readiness Level (TRL) of this technology, the corresponding FM techniques and processes must be validated in a series of experimental tests, including: laboratory/ground testing, microgravity flight testing, suborbital flight testing, …

Go to article

Investigation Of Pulse Detonation Engines; Theory, Design And Analysis, Jeff Vizcaino Apr 2013

Investigation Of Pulse Detonation Engines; Theory, Design And Analysis, Jeff Vizcaino

Doctoral Dissertations and Master's Theses

Detonation and constant volume combustion has been known to the scientific community for some time but only recently has active research been done into its applications. Detonation based engines have received much attention in the last two decades because of its simple design and potential benefits to the aerospace industry. It is then the goal of this study to provide a background into detonation theory and application and establish the basis for future detonation based research at Embry-Riddle Aeronautical University. In this paper we will discuss the experimental aspects of building, testing, and analysis of a pulsed detonation tube …

Go to article

Measuring Acoustic Attenuation Of Polymer Materials Using Drop Ball Test, Yi Zhang Apr 2013

Measuring Acoustic Attenuation Of Polymer Materials Using Drop Ball Test, Yi Zhang

Doctoral Dissertations and Master's Theses

Polymers are often used for vibration damping and energy absorption. The effect of a material in reducing the strength of sound waves traveling through it is called acoustic attenuation. In the past, attenuation has mostly been evaluated in the MHz frequency range, using a pulse generator and transmitting transducer as the wave source. However, most real acoustic activities occur at frequencies up to a few hundred kHz. Here, a simple drop ball mechanism is used to generate acoustic source waves in the kHz range, and the attenuation capacities of several solid materials are measured. The recorded waveforms substantially differ between …

Go to article

A Preliminary Study Of Acoustic Prediction Technology Based On Detached Eddy Simulations For Supersonic Jets Impinging On Flat Plates, Yuvraj Dewan Apr 2013

A Preliminary Study Of Acoustic Prediction Technology Based On Detached Eddy Simulations For Supersonic Jets Impinging On Flat Plates, Yuvraj Dewan

Doctoral Dissertations and Master's Theses

An application of an existing industry tool to study supersonic jets impinging on at plates is shown. This industry tool is the commercially available CFD package ANSYS FLUENT. The supersonic jet studied is perfectly expanded with a Mach number of 1.5, and it impinges on a flat surface 4 nozzle throat diameters from the jet exit. All turbulence modeling is done using a hybrid RANS/LES technique known as Delayed Detached Eddy Simulation (DDES). A transient solution is calculated using the pressure-based coupled solver formulation with the second-order bounded central-upwind spatial discretization and second-order implicit time marching scheme. Flow features like …

Go to article

Communications: Moving Data, Robert J. Twiggs Mar 2013

Communications: Moving Data, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Communications: Moving Data" from March 24, 2013.

Go to article

Evaluation Of The Thorax Of Manduca Sexta For Flapping Wing Micro Air Vehicle Applications, Brian C. Cranston Mar 2013

Evaluation Of The Thorax Of Manduca Sexta For Flapping Wing Micro Air Vehicle Applications, Brian C. Cranston

Theses and Dissertations

The tobacco hornworm hawkmoth (Manduca sexta) provides an excellent model from which to gather knowledge pertaining to the development of a Flapping Wing Micro Air Vehicle (FWMAV). One of the major challenges in design of a FWMAV is the energy demanding nature of low Reynolds number flapping flight. Therefore, an understanding of the power required by the flight muscles to actuate the wings is essential for the design of a FWMAV. The M.sexta wing/thorax mechanism was evaluated as a mechanical system in order to gain insight to the mechanical power required to produce the full natural wing stroke. A unique …

Go to article

Feasibility Analysis On The Utilization Of The Iridium Satellite Communications Network For Resident Space Objects In Low Earth Orbit, John R. Claybrook Mar 2013

Feasibility Analysis On The Utilization Of The Iridium Satellite Communications Network For Resident Space Objects In Low Earth Orbit, John R. Claybrook

Theses and Dissertations

In recent years, space has become more congested and contested, particularly in low Earth orbit (LEO), generating the need for a low-latency capability to provide precise orbital knowledge and accurate space situational awareness information. This thesis investigates the feasibility of resident space objects (RSOs) in LEO communicating continuously with ground operators or users through the Iridium Satellite Communications Network. Due to the problem's complexity and required time for computation, a test-industry technique called Design of Experiments is implemented in order to efficiently study the feasibility of the communication link. Specifically, an optimal response surface method is chosen to design the …

Go to article

Integration Of An Inter Turbine Burner To A Jet Turbine Engine, Matthew M. Conrad Mar 2013

Integration Of An Inter Turbine Burner To A Jet Turbine Engine, Matthew M. Conrad

Theses and Dissertations

As aircraft power requirements continue to grow, whether for electrical systems or increased thrust, improved engine efficiency must be found. An Ultra-Compact Combustor (UCC) is a proposed apparatus for accomplishing this task by burning in the circumferential direction as a main combustor or an Inter-Turbine Burner (ITB). In order for the UCC to be viable it is important to study the effects of feeding the core and circumferential flows from a common gas reservoir. This research effort has developed a diffuser, for the AFIT Combustion Laboratory, that is capable of 80/20, 70/30, and 60/40 mass flow splits between the core …

Go to article

Power Requirements For Bi-Harmonic Amplitude And Bias Modulation Control Of A Flapping Wing Micro Air Vehicle, Justin R. Carl Mar 2013

Power Requirements For Bi-Harmonic Amplitude And Bias Modulation Control Of A Flapping Wing Micro Air Vehicle, Justin R. Carl

Theses and Dissertations

Flapping wing micro air vehicles (FWMAV) have been a growing field in the research of micro air vehicles, but little emphasis has been placed on control theory. Research is ongoing on how to power FWMAVs where mass is a major area of concern. However, there is little research on the power requirements for the controllers to manipulate the wings of a FWMAV. A novel control theory, BABM, allows two actuators to produce forces and moments in five of the FWMAV's six DOF. Several FWMAV prototypes were constructed and tested on a six-component balance. Data was collected for varying control parameters …

Go to article

Dynamic Constellation Tasking And Management, Steven P. Ingraham Mar 2013

Dynamic Constellation Tasking And Management, Steven P. Ingraham

Theses and Dissertations

Responsive orbits have gained much attention in recent years and many AFIT theses have addressed this topic. Specifically, the following topics have been studied: phasing within an orbit, adjusting time of arrival, avoidance, and maneuver detection. This thesis seeks to determine the feasibility of maneuvering satellites from circular (600 km) orbits to eccentric (600 km by 175 km) orbits in order to collect high resolution images for Earth surveillance. Coverage is calculated for multiple 6-satellite constellations. Perturbations for the subject orbits are analyzed and compared to simulation results.

Go to article

Effects Of Temperature On The Performance Of A Small Internal Combustion Engine At Altitude, Travis D. Husaboe Mar 2013

Effects Of Temperature On The Performance Of A Small Internal Combustion Engine At Altitude, Travis D. Husaboe

Theses and Dissertations

The effects of atmospheric pressure and temperature variations on the performance of small internal combustion (IC) engines operating at altitudes significantly above sea level are not widely documented. Using an altitude chamber and fuel-injected twostroke engine, data were collected while varying air temperature along with pressure. The peak engine power was 4.1 kW at roughly sea level standard conditions and dropped to 3.5 kW at the standard conditions for an altitude of 1.5 km. At a combination of pressure and temperature corresponding to an altitude of 3 km, peak power fell further to 2.5 kW. The combined effects of standard …

Go to article

Characterization Of Rotating Detonation Engine Exhaust Through Nozzle Guide Vanes, Nick D. Debarmore Mar 2013

Characterization Of Rotating Detonation Engine Exhaust Through Nozzle Guide Vanes, Nick D. Debarmore

Theses and Dissertations

A RDE has higher thermal efficiencies in comparison to its traditional gas turbine counterparts. Thus, as budgets decrease and fuel costs increase, RDEs have become a research focus for the United States Air Force. An integration assembly for attaching the first NGV section from a T63 gas turbine engine to a 6 inch diameter RDE was designed and built for this study. Pressure, temperature, and unsteadiness measurements were completed in this study to characterize the exhaust flow of the RDE through the NGVs. The experiment found that stagnation pressure dropped an average of 4% through the NGVs, and that unsteadiness …

Go to article

Design Of A Control Moment Gyroscope Attitude Actuation System For The Attitude Control Subsystem Proving Ground, Samuel C. Johnson Mar 2013

Design Of A Control Moment Gyroscope Attitude Actuation System For The Attitude Control Subsystem Proving Ground, Samuel C. Johnson

Theses and Dissertations

All spacecraft represent a considerable investment of both time and money. To ensure mission success, testing and validation of all vital systems is crucial to the design process. The attitude control subsystem (ACS) is typically tested thoroughly, to include both hardware and control algorithms. Computer simulations offer a simple and relatively cheap method of predicting the performance of the ACS; however, computer simulations cannot provide the assurances necessary to qualify an ACS hardware configuration or control algorithm spaceworthy. For this reason, physical spacecraft simulators must be used to validate ACS dynamics. Previous research showed there is room for significant improvement …

Go to article

Development Of Optimized Piezoelectric Bending Actuators For Use In An Insect Sized Flapping Wing Micro Air Vehicle, Robert K. Lenzen Mar 2013

Development Of Optimized Piezoelectric Bending Actuators For Use In An Insect Sized Flapping Wing Micro Air Vehicle, Robert K. Lenzen

Theses and Dissertations

Piezoelectric bimorph actuators, as opposed to rotary electric motors, have been suggested as an actuation mechanism for flapping wing micro air vehicles (FWMAVs) because they exhibit favorable characteristics such as low weight, rapidly adaptable frequencies, lower acoustic signature, and controllable flapping amplitudes. Research at the Air Force Research Labs and the Air Force Institute of Technology has shown that by using one actuator per wing, up to five degrees of freedom are possible. However, due to the weight constraints on a FWMAV, the piezoelectric bimorph actuators need to be fully optimized to support free flight. This study focused on three …

Go to article

A Study Of The Thermal Environment Developed By A Traveling Slipper At High Velocity, Kathleen H. Le Mar 2013

A Study Of The Thermal Environment Developed By A Traveling Slipper At High Velocity, Kathleen H. Le

Theses and Dissertations

The research presented in this thesis is developed from the relative sliding motion of a traveling slipper and stationary rail at the Holloman High Speed Test Track located at Holloman AFB, NM. The high velocity condition of the slipper traveling down the rail creates a thermal environment that is of interest to the researchers at the Air Force Institute of Technology. The high temperatures coupled with high velocity leads to a non-linear problem known as melt wear. The goal of this research is to characterize the amount of heat flow going into the slipper as it traverses the rail and …

Go to article

Experimental Characterization Of The Structural Dynamics And Aero-Structural Sensitivity Of A Hawkmoth Wing Toward The Development Of Design Rules For Flapping Wing Micro Air Vehicles, Aaron G. Norris Mar 2013

Experimental Characterization Of The Structural Dynamics And Aero-Structural Sensitivity Of A Hawkmoth Wing Toward The Development Of Design Rules For Flapping Wing Micro Air Vehicles, Aaron G. Norris

Theses and Dissertations

A case is made for why the structures discipline must take on a more central role in the research and design of flapping-wing micro-air-vehicles, especially if research trends continue toward bio-inspired, insect-sized flexible wing designs. In making the case, the eigenstructure of the wing emerges as a key structural metric for consideration. But with virtually no structural dynamic data available for actual insect wings, both engineered and computational wing models that have been inspired by biological analogs have no structural truth models to which they can be anchored. An experimental framework is therefore developed herein for performing system identification testing …

Go to article

Heat Exchanger Design And Testing For A 6-Inch Rotating Detonation Engine, Scott W. Theuerkauf Mar 2013

Heat Exchanger Design And Testing For A 6-Inch Rotating Detonation Engine, Scott W. Theuerkauf

Theses and Dissertations

This thesis explains the design and testing of a water-cooled rotating detonation engine (RDE) run on hydrogen and air. The change in water temperature as it cooled the engine was used to find the steady heat rate into the containing walls of the detonation channel. The engine successfully ran four times for 20 seconds each. The steady-state heat rate was measured to be 2.5% of the propellant lower heating value (LHV) into the outer wall and 7.1% of LHV into the inner wall. Additionally, a quick-response resistance temperature detector (RTD) was used in an uncooled RDE of similar dimension to …

Go to article

Real-Time Heading Estimation Using Perspective Features, James W. Dean Mar 2013

Real-Time Heading Estimation Using Perspective Features, James W. Dean

Theses and Dissertations

There are a large number of commercially available quad-rotor helicopters available from various manufacturers. All of these systems rely on a low cost MEMS based inertial measurement system for stabilization and navigation. These low cost inertial systems are all subject to rapid error growth in their attitude and position estimates unless bounded by external measurements. This thesis created real-time algorithm to integrate measurements from visual cues with measurements from onboard sensors to estimate the attitude position and velocity of a quad-rotor helicopter in a local navigation frame, a system model for the ARDrone, and a feed-back controller for the vehicle's …

Go to article

Creep Of Hi-Nicalon S Fiber Tows At Elevated Temperature In Air And In Steam, Theodore R. Shillig Mar 2013

Creep Of Hi-Nicalon S Fiber Tows At Elevated Temperature In Air And In Steam, Theodore R. Shillig

Theses and Dissertations

Structural aerospace components require materials that have superior long-term mechanical properties and can withstand severe environmental conditions, such as high temperatures, high pressures and moisture. Ceramic-matrix composites (CMCs) are capable of maintaining excellent strength and creep resistance at high temperatures, which makes them attractive candidate materials for aerospace applications, particularly in propulsion components. Silicon Carbide (SiC) ceramic fibers have been used as constituent materials in CMCs, although oxidation of the SiC to SiO2 has been a known fiber degradation mechanism. Recently developed near stoichiometric Hi-Nicalon-S fibers have shown significant improvements in thermo-chemical stability. Creep of the Hi-Nicalon-S fibers at elevated …

Go to article

Information Encoding On A Pseudo Random Noise Radar Waveform, Joshua A . Hardin Mar 2013

Information Encoding On A Pseudo Random Noise Radar Waveform, Joshua A . Hardin

Theses and Dissertations

Navigation requires knowledge of current location and a planned destination. This is true with manned vehicles and unmanned vehicles. There are many ways to acquire the current location, including global positioning system (GPS), triangulation, radar, and dead reckoning. Today GPS is the most reliable and accurate navigation technique when there is a clear, unobstructed view of the satellite constellation. Various sensors can be used to perform indoor navigation; however, when the vehicle is autonomous the sensors need to provide the exact location to the system. This research determined if using a template replay strategy has the same RNR performance as …

Go to article

Inertial Navigation System Aiding Using Vision, James O. Quarmyne Mar 2013

Inertial Navigation System Aiding Using Vision, James O. Quarmyne

Theses and Dissertations

The aiding of an INS using measurements over time of the line of sight of ground features as they come into view of an onboard camera is investigated. The objective is to quantify the reduction in the navigation states' errors by using bearings-only measurements over time of terrain features in the aircraft's field of view. INS aiding is achieved through the use of a Kalman Filter. The design of the Kalman Filter is presented and it is shown that during a long range, wings level cruising flight at constant velocity and altitude, a 90% reduction in the aided INS-calculated navigation …

Go to article

Adaptations And Analysis Of The Afit Noise Radar Network For Indoor Navigation, Russell D. Wilson Iv Mar 2013

Adaptations And Analysis Of The Afit Noise Radar Network For Indoor Navigation, Russell D. Wilson Iv

Theses and Dissertations

After several years of development, the AFIT Noise Radar Network (NoNET) has proven to be an extremely versatile system for many standard radar functions. This pallet of capabilities includes through the wall target tracking capabilities due to its wide bandwidth and UHF operations. Utilizing White Gaussian Noise as its waveform, the NoNET can operate at much lower power levels than other comparable systems while remaining extremely covert. In an effort to explore new applications, the question arose could the NoNET provide a viable option for navigation capability in GPS denied and indoor environments? This research aims to provide proof of …

Go to article

Pseudolite Architecture And Performance Analysis For The Faa's Nextgen Airspace, Joseph A . Czabaranek Mar 2013

Pseudolite Architecture And Performance Analysis For The Faa's Nextgen Airspace, Joseph A . Czabaranek

Theses and Dissertations

By 2025 the FAA plans to have fully implemented its NextGen Airspace design. NextGen takes advantage of modern positioning technologies as well as automation, data sharing, and display technologies that will allow more efficient use of our ever busier National Airspace (NAS). A key element of NextGen is the transition from surveillance RADAR providing aircraft separation and navigation to the use of the GPS and Automatic Dependent Surveillance Broadcast (ADS-B). ADS-B couples the precision of the GPS with networked ground and airborne receivers to provide precise situational awareness to pilots and controllers. The result is increased safety, capacity, and access …

Go to article

Development Of Autonomous Optimal Cooperative Control In Relay Rover Configured Small Unmanned Aerial Systems, Timothy J. Shuck Mar 2013

Development Of Autonomous Optimal Cooperative Control In Relay Rover Configured Small Unmanned Aerial Systems, Timothy J. Shuck

Theses and Dissertations

This thesis documents the research effort to develop, integrate and implement the system hardware and the software necessary to validate the Air Force Institute of Technology's theoretical advances in small unmanned aerial systems (SUAS) cooperative control. The end state objective of the research effort was to flight test an autonomous control algorithm on a communication relay unmanned aerial vehicle (UAV) that was actively relaying data to and from a rover UAV. The relay UAV is one part of a SUAS designed to utilize cooperative control to extend the effective line-of-sight operating range for a rover UAV. An algorithm is integrated …

Go to article

Aerial Networking For The Implementation Of Cooperative Control On Small Unmanned Aerial Systems, Scott A . Songer Mar 2013

Aerial Networking For The Implementation Of Cooperative Control On Small Unmanned Aerial Systems, Scott A . Songer

Theses and Dissertations

The employment of Small Unmanned Aerial Systems (SUAS) for reconnaissance and surveillance missions is a vital capability of the United States military. Cooperative control algorithms for SUAS can enable tactical multi-vehicle configurations for communications extension, intelligent navigation, and a multitude of other applications. Past research at AFIT has designed and simulated a cooperative rover-relay algorithm for extended communications and has investigated its implementation through various modem configurations. This research explores aerial networking options for implementing cooperative control and applies them to an actual SUAS. Using Commercial Off-The-Shelf (COTS) hardware, a system was designed and flight tested to implement the rover-relay …

Go to article

Biaxial (Tension-Torsion) Testing Of An Oxide/Oxide Ceramic Matrix Composite, Joseph M. Derienzo Mar 2013

Biaxial (Tension-Torsion) Testing Of An Oxide/Oxide Ceramic Matrix Composite, Joseph M. Derienzo

Theses and Dissertations

High temperatures and structural loads in advanced aerospace structures often result in complex loading conditions. This study is focused on biaxial (tension-torsion) testing of an oxide-oxide porous matrix ceramic matrix composite (CMC) (NextelTM 720/AS) thin wall tube with a novel involute layup. Tests included pure torsion and biaxial (tension- torsion) loading. Strain gages were used in addition to digital image correlation (DIC) to measure strains and to detect crack initiation and propagation. Room temperature and 1100°C uniaxial tests were performed in a build up approach prior to biaxial (tension-torsion) testing. Double-notch shear (DNS) specimens were tested at 1100°C in air …

Go to article

Computational Simulation Of Explosively Generated Pulsed Power Devices, Mollie C. Drumm Mar 2013

Computational Simulation Of Explosively Generated Pulsed Power Devices, Mollie C. Drumm

Theses and Dissertations

Technology and size constraints have limited the development of the end game mechanisms of today's modern military weapons. A smaller, more efficient means of powering these devices is needed, and explosive pulsed power devices could be that answer. While most prior research has been in the experimental field, there is a need for more theory-based research and a computer modeling capability. The objective of this research was to use experimental data collected by the US Army at Redstone Arsenal from their ferroelectric generator (FEG) design in combination with the ALEGRA-EMMA code to develop a computer model that can accurately represent …

Go to article

Using Hysteretic Energy To Evaluate Damping Characteristics Of Hard Coating On Titanium, Colin C. Engebretsen Mar 2013

Using Hysteretic Energy To Evaluate Damping Characteristics Of Hard Coating On Titanium, Colin C. Engebretsen

Theses and Dissertations

Current methods of material damping evaluation consist of bending tests involving half-power bandwidth base excitation or free decay methods measured by laser vibrometer. These methods are accompanied by complex, nonlinear strain evaluation; they are vulnerable to undesired air damping; and they require less than commonplace equipment. The measurement of hysteretic energy loss in axial cyclic loading alleviates these difficulties. By using common tensile testing machines, strain is kept linear and air damping is of no concern. Furthermore, the static test section allows for simplified environmental variation for high temperature or high humidity testing. This study set forth to advance and …

Go to article

Experimental Analysis Of Dampened Breathing Mode Oscillation On Hall Effect Thruster Performance, Christopher D. Vineski Mar 2013

Experimental Analysis Of Dampened Breathing Mode Oscillation On Hall Effect Thruster Performance, Christopher D. Vineski

Theses and Dissertations

Experiments were performed at AFIT to determine the effect of active control of the magnetic field strength to reduce the breathing mode oscillation on the efficiency of a 200W Hall thruster. The breathing mode oscillation amplitude was measured by the root mean square (RMS) variation in the AC portion of the discharge current. Experiments were run using krypton and xenon propellant. Using the xenon propellant control of the RMS improved the propellant utilization efficiency by approximately 2% in two cases, while reducing the magnet current efficiency by about 10%. Control of the RMS's effect on the divergence angle of the …

Go to article

First Prev Next Last