Aerospace Engineering Commons^™

Developing An Inclusive Computational Platform For Aerospace Education Using Nasa’S Emtg, Tia Bajaj

College of Engineering Summer Undergraduate Research Program

This project will establish comprehensive guidelines and a strategic action plan for developing an inclusive and accessible computing platform that integrates NASA's Evolutionary Mission Trajectory Generator (EMTG) software with PolySpace, Cal Poly’s in-house space mission design toolkit. Employing Universal Design for Learning (UDL) principles, the project will ensure equitable access and participation for diverse undergraduate aerospace engineering students, emphasizing inclusion for women and underrepresented groups in aerospace. Inclusivity will be promoted by creating detailed guidelines for remote software interfaces and visualization layers specifically designed for diverse learning styles and accessibility needs. A blueprint for an inclusive curriculum module will also …

Hybrid Machine Learning--Finite Element Solvers For Solid And Fluid Mechanics, Victor Alcantara-Arias, Spandan Suthar

College of Engineering Summer Undergraduate Research Program

The goal of this project is to develop a new class of hybrid solvers for partial differential equations (PDEs) encountered in solid and fluid mechanics that blend traditional finite element methods (FEM) with modern machine learning algorithms. While FEM solvers are well developed, they can be computationally expensive for realistic problems. Machine learning algorithms have emerged as possible new solutions to cut down the computational cost associated with expensive FEM simulations, but these are typically not interpretable. Previous work on this topic resulted in a class of fully interpretable machine learning solvers for PDEs that had two primary drawbacks: (i) …

Perturbation Solution Of Air-Water Mixture For Jet Noise Reduction, Juan Felipe Uribe Cifuentes

Doctoral Dissertations and Master's Theses

This work investigates passive jet-noise mitigation using externally positioned air–water curtains that attenuate radiated sound without altering the underlying jet dynamics. Two classes of multiphase media are examined: a gaseous carrier phase containing dispersed liquid droplets, and a liquid carrier phase containing entrained air bubbles. For both systems, suspended and dispersed regimes are represented through a generalized perturbation formulation derived from the volume-averaged multiphase equations, incorporating finite volume fractions, interphase momentum coupling, and slip between phases. Analytical and numerical solutions demonstrate that acoustic attenuation is primarily governed by dispersed-phase diameter, volume fraction, and excitation frequency, with additional sensitivity to phase-interaction …

Autonomous Landing Of An Unmanned Aerial Vehicle On An Unmanned Surface Vessel Using Model Predictive Control With An Adaptive-Covariance Extended Kalman Filter, Jorge Estupinan

Doctoral Dissertations and Master's Theses

This thesis presents the development of vision-based estimation and model predictive control (MPC) strategies to enable an Unmanned Aerial Vehicle (UAV) to land autonomously on an Unmanned Surface Vessel (USV) subjected to wave-induced motion. An innovative Adaptive-Covariance Extended Kalman Filter (AEKF) implementation was developed for the estimation of the 6 degree-of-freedom USV states using GPS and vision-based measurements of AprilTag markers on the USV landing platform. The AEKF employs an uncontrolled 6 degree-of-freedom nonlinear model augmented with second-order harmonic wave-induced motion dynamics. The AEKF implements two correction techniques: an adaptive covariance adjustment and an artificial covariance inflation regulated by a …

Exploration Of Physics-Informed Grid Generation Technique For Wall-Modeled Les Using Eagle3d, Dominic Schneider

Doctoral Dissertations and Master's Theses

Wall-Modeled Large Eddy Simulation (WMLES) is an area of interest due to its ability to lower computational costs of LES. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and computational resources required. A novel technique for generating a lean, physics based WMLES grid is described.

The technique utilizes a RANS solution to extract turbulence information, user-specified values related to resolution of turbulent energy levels, acoustics waves, and shock waves, to generate a point cloud for producing a lean WMLES grid with in-house …

Unresolved Image Simulation For Space Situational Awareness Applications, Fox Coniglario

Doctoral Dissertations and Master's Theses

The knowledge of what lies in orbit around Earth is at best a guess. Decades of spaceflight, debris buildup, and vehicle collisions have contributed to a large number of objects that are simply not able to be catalogued. Ongoing efforts to catalog debris in orbit have reached limits by conventional measures and as such, research is active in the field of in-orbit space situational awareness. This thesis intends to help fill a hole in the development of such orbital platforms by assisting the development of image processing software pipelines though the simulation of unresolved space imagery. The simulation uses accurate …

Active Measurement Of A Micron-Order Gap Under High-Speed And High-Temperature Conditions, Andrew Becker

Doctoral Dissertations and Master's Theses

The hypersonic regime poses numerous challenges that researchers face in the development of hypersonic flight vehicles. Due to their excellent thermomechanical properties, ultra-high-temperature ceramics (UHTCs) have risen as a promising solution to act as a protective barrier between the harsh environment and surface materials of these flight bodies. The mechanical operation of a portable hypersonic simulation device was developed in-house and tested at Argonne National Laboratories (ANL) to gather in-situ material response of prospective UHTC samples when exposed to a hypersonic regime. An edge detection-based algorithm was developed and used in LabVIEW to monitor the health and operation of the …

Characterization Of Cooled Turbine Efficiency For Off-Design Performance Models, Alberto Garcia

Doctoral Dissertations and Master's Theses

Gas turbine performance modeling is essential for predicting engine behavior across design and off-design conditions. Yet the treatment of cooling or service flows remains inconsistent, as these streams interact with the main flow in complex ways and their contribution to turbine work depends on how they are represented in performance models. The challenge is especially present in “black-box” approaches, where only inlet and outlet conditions are known and engineers must decide whether to introduce cooling flows upstream (if performing useful work) or downstream (if not). This thesis examines how different definitions of isentropic power and cooling-flow treatment affect the apparent …

High-Fidelity Modeling Of Evtol Rotor Unsteady Aerodynamic And Aeroacoustic Response To Time-Harmonic Gust, Vadim Voropayev

Doctoral Dissertations and Master's Theses

The rapid emergence of Urban Air Mobility (UAM) demands accurate prediction and mitigation of noise generated by electric vertical take-off and landing (eVTOL) aircraft operating in complex urban environments. Among the various noise sources, the aerodynamic and acoustic response of rotors to unsteady inflow represents a major uncertainty in community-noise assessment and certification. This thesis investigates the aerodynamic and aeroacoustic behavior of a representative eVTOL rotor subjected to time-harmonic inflow disturbances, providing a detailed numerical framework to quantify how periodic gusts influence rotor performance, unsteady loading, and sound radiation.

The study employs a three-stage computational methodology using the open-source solver …

Downwind-Upwind Flux Path Analysis Method For Model Reduction Performance Evaluations, Christian Robert Smith

Theses and Dissertations

Large, complex chemical kinetic models have long since been limited by the computational cost it takes to evaluate said model. Over time many reduction methods have been developed to combat this computational cost. However, very little has been done towards evaluating the limitations of reductions as a way of understanding the original model’s characteristics. This paper aimed to use a path flux analysis-based reduction algorithm to rapidly develop multiple reduced mechanisms for a 96 species FFCM-2 methane chemical kinetic model as well as an 858 species n-Dodecane chemical kinetic model. The goal of formulating these reduced mechanisms was to identify …

A Building Block Approach To Certification By Analysis Applied To A Ditching Analysis, Preliminary Studies, Sean Taylor

Theses and Dissertations

Extended Twin-Engine Operations (ETOPS) certification ensures safe trans-oceanic operation of transport category aircraft. A critical aspect of ETOPS certification is compliance with ditching regulations. The importance of ditching analysis has grown significantly and come under greater scrutiny because of the ‘Miracle on the Hudson’ incident. For transport category aircraft certified under 14 CFR 25 regulations, compliance with ditching requirements, rests on two major components. First, demonstrating acceptable aircraft dynamic behavior during the ditching event and second, ensuring the airframe can withstand the loads generated because of water impact.

Historically, original equipment manufacturers (OEMs) relied on comparisons to existing aircraft with …

Calculating Surface Current Velocities From Video Generated From A Near Forward-Facing Camera, Colby James Weeks

Theses and Dissertations

This work presents a camera system for estimating surface currents. A combined camera and IMU system provide high resolution images and high precision orientation information, respectively. This eliminates the need for leveling and enables forward looking operation. The hardware stack includes a Lucid Vision Triton TRT162S monochrome camera, an SBG Ellipse D with dual antenna GNSS for precise pose, and an Nvidia Jetson Orin for acquisition and processing. The Ellipse D provides a hardware trigger at 10 Hz to time stamp each frame and to synchronize images with inertial measurements.

A camera calibration step estimates the intrinsic camera parameters and …

Additively Manufactured Bioinspired Microstructures For Active Surface Modification, Zefu Ren

Doctoral Dissertations and Master's Theses

Advancements in additive manufacturing have facilitated the development of bioinspired microstructures, which hold promise for applications, such as liquid transport, self-cleaning, and anti-icing. However, the controllability of these microstructures remains an area requiring further exploration. This research explores the design, fabrication, and active control of 3D-printed bioinspired microstructures for dynamic wettability modulation. First, the anisotropic scales of butterfly wings were replicated through optimized two-photon polymerization printing strategies, achieving directional droplet motion controlled by structural geometry and arrangement. The reversed wetting trend compared with natural wings revealed key insights into the structure–performance relationship. Next, microstructures were integrated with dielectric elastomer actuators …

Adaptive Control For Spacecraft With Flexible Appendages With Unknown Parameters, Nicolo Woodward

Doctoral Dissertations and Master's Theses

Flexible spacecraft pose several challenges in control design due to the uncertain dynamical model and the underactuated nature of these systems. Adaptive and robust controllers are the common choice for these systems to either meet operational requirements like attitude pointing or to suppress vibrations. However, these controllers add complexity in the design of onboard Attitude Determination and Control Systems (ADCS) and the Reaction Control Systems (RCS) for spacecraft maneuvering. The objective of this research is to control a system that undergoes unpredictable and unknown disturbances through onboard derivation of an equivalent reduced order model designed around mounted sensors. The proposed …

Jet Impingement And Vortex/Swirl Cooling Of Different Inlet And Outlet Geometrical Configurations For Turbine Blade Leading Edge Cooling, Irfan Ahmad Sheikh

Dissertations

Gas turbine blades operate in extreme environments, exposed directly to high-temperature combustion gases that cause severe thermal stresses, weaken material integrity, and may lead to structural failure. Proper cooling is crucial to lower blade temperatures, reduce thermal stresses, prevent failure, and improve overall engine efficiency. This work presents a detailed numerical study of various cooling configurations by applying two advanced leading-edge cooling methods, jet impingement and swirl cooling, across different inlet mass flow rates and jet Reynolds numbers (Rej) ranging from 1,000 to 20,000 to evaluate their cooling performance.

Several advanced leading-edge cooling configurations are proposed and compared with the …

Dissociation Of Subjective And Objective Measures Of Trust In Vehicle Automation: A Driving Simulator Study, Samuel Petkac, Tetsuya Sato, Kun Xie, Yusuke Yamani

Psychology Faculty Publications

Trust is a crucial factor that influences human-automation interaction in surface transportation. Previous research indicates that participants tend to display higher levels of subjective trust toward lower-level automated systems compared to high-level automated systems. However, administering subjective trust measures via questionnaires can interfere with primary task performance, limiting researchers' ability to measure trust continuously in a real-world manner. In the current driving simulator study, 25 drivers using an advanced driving system (ADS) were randomly assigned to either an active (L2) or passive (L3) automated driving condition. Participants experienced eight near-miss driving scenarios with or without obstructions in a distributed driving …

Feasibility Of Helium And Nitrogen As Surrogate Gases For Hydrogen Jet Using Planar Laser-Induced Fluorescence In A Constant Volume Chamber, Jungho Justin Kim, Seong Young Lee, Youngmin Ki, Joonsik Hwang, Choongsik Bae

Michigan Tech Publications

This study investigates the feasibility of using helium and nitrogen as surrogate gases for visualizing the non-reactive behavior of hydrogen jets in a constant volume chamber. Hydrogen, helium, and nitrogen were individually mixed with acetone vapor and injected using a hollow-cone injector. The fuel distribution was visualized using Planar Laser-Induced Fluorescence (PLIF), while simultaneous Schlieren imaging was employed to capture overall jet structures. Quantitative comparisons of jet areas extracted from both imaging techniques demonstrated that acetone effectively followed the gas-phase flow of each species, validating its use as a flow tracer. Furthermore, helium and nitrogen exhibited jet dispersion patterns comparable …

Warpage-Resistant, Under-Extrusion-Free, High-Surface-Quality Additive Manufacturing Process For Polyethylene-Based Composite Radiation Shielding Material, Duo Xu, Volodymyr Korolovych, You Lyu, Jacqueline Aslarus, Domingo R. Flores-Hernandez, Simo Pajovic, William T. Heller, Lembit Sihver, Svetlana V. Boriskina

Informatics and Engineering Systems Faculty Publications

Polyethylene (PE) is one of the best shielding materials for primary space radiation due to its high hydrogen content. For effective secondary neutron shielding, boron-rich fillers are incorporated to enhance performance. The semicrystalline nature and high thermal expansion coefficient of PE impede its adoption for in situ additive manufacture in space via the fused deposition modeling (FDM) 3D printing. We developed an optimized PE blend to mitigate the effects of under-extrusion and warpage. Guided by studies on extrusion and warpage, we developed an optimal set of printing parameters for the proposed PE blend. The optimum PE blend─both in its pure …

Enhancing High Cycle Fatigue Perfomance Of Electron Beam Melted Ti6al4v: A Study On Shot Peening And Hot Isostatic Pressing, Naghmeh M. Mojib, Dwayne D. Arola, Ramulu Mamidala

15th International Conference on Shot Peening

The qualification of electron beam powder bed fusion (PBF-EB) for safety-critical applications is hindered by variability in high cycle fatigue performance, largely due to surface roughness and internal defects. While Hot Isostatic Pressing (HIP) effectively reduces internal porosity, it does not address surface-initiated fatigue failures. This study investigated the combined effects of HIP and shot peening on enhancing the fatigue performance of PBF-EB Ti6Al4V. Over 50 specimens, including both vertical and horizontal build orientations, underwent high cycle fatigue testing per ASTM E466. X-Ray computed tomography confirmed decrease in defect distribution following HIP, while shot peening resulted in a more uniform …

Improvement Of The Fatigue Behaviour Of Additive Manufatured Scalmalloy By Using Surface Improvement Processes, Francisco José Boby Alcaide, Irene Eras, José Manuel De Los Santos, Alejandro Munoz Castro, Antonio Perinan Butrón, Jorge Sogorb

15th International Conference on Shot Peening

The use of light metals such as Aluminum alloys has experienced a remarkable increase for the additive manufacturing (AM) industry, especially in aerospace.

AM Scalmalloy®. (an Al-Mg-Sc alloy) shows outstanding behavior with much higher mechanical performance with respect to other alloys for powder bed fusion laser-based (PBF-LB) process like AlSi10Mg or AlSi7Mg. Recent studies have mainly focused on static loading, with minor attention to cyclic loading despite its vital importance in many applications.

In this work, the fatigue performance of PBF-LB Scalmalloy was investigated considering the effects of surface treatments to identify the set of optimal post-processes. Shot peening with …

Methodologies And Applications Of Precision Shot Peening To Hole Or Slot Geometry, James C. Hoffman

15th International Conference on Shot Peening

Shot peening, a commonly used method of fatigue and surface enhancement, is a critical process in many of the components in the aerospace industry. When it comes to small holes and/or slot geometries in these components, the process can become a challenge when these features are smaller than a conventional size Almen strip. In these cases, a decision must be made about how to process this type of geometry. Oftentimes, the method to apply the shot peen process is already defined in a process specification or part print so we must adhere to that method. If a method is not …

The E-Strip® As A Tool For Predictive Maintenance To Monitor And Control Shot Peening Processes, Walter A. Beach, Scott Glasier

15th International Conference on Shot Peening

The primary objective of this paper is to demonstrate the E-Strip® is capable of providing real-time feedback to the machine controller for making necessary process adjustments due to external forces, such as machine wear. Adjustments may include regulating air pressure and shot flow within pre-defined tolerances dictated by specification. It is anticipated that this integrated approach will significantly reduce variations in intensity levels observed from part to part and lot to lot.

Improving Fatigue Strength And Life Of Single Crystal Cmsx-4, Jochen Peter Fuhr, Lloyd Hackel, Nicolau I. Morar, Noah Holtham, Keivan Davami, Montu Sharma, Rajkumar Roy

15th International Conference on Shot Peening

The deep penetration of laser peening (LP) and retention of residual stress at high temperature by LP is significant in improving fatigue life and strength of superalloys exposed to high temperature and corrosion. Single crystal CMSX-4, was evaluated for stress relaxation and both fatigue life and fatigue strength of material that was LP-treated compared to non-LP and shot-peened (SP) specimens. LP was done with multiple layers using a 20 J/pulse laser where the laser high energy enabled using a 5 mm spot size on the metal surface. Stress measurements by the slitting technique showed the plastic penetration depth exceeded SP …

Overcoming Variable Illumination In Photovoltaic Snow Monitoring: A Real-Time Robust Drone-Based Deep Learning Approach, Amna Mazen, Ashraf Saleem, Kamyab Yazdipaz, Ana Dyreson

Michigan Tech Publications

Snow accumulation on photovoltaic (PV) panels can cause significant energy losses in cold climates. While drone-based monitoring offers a scalable solution, real-world challenges like varying illumination can hinder accurate snow detection. We previously developed a YOLO-based drone system for snow coverage detection using a Fixed Thresholding segmentation method to discriminate snow from the solar panel; however, it struggled in challenging lighting conditions. This work addresses those limitations by presenting a reliable drone-based system to accurately estimate the Snow Coverage Percentage (SCP) over PV panels. The system combines a lightweight YOLOv11n-seg deep learning model for panel detection with an adaptive image …

Performance Of A Two-Body Wave Energy Converter With An Annular Heave Plate, Raj Tamakuwala, Muhammad Usman, Nathan Tom, Hassan Masoud

Michigan Tech Publications

We theoretically examine the performance of a two-body wave energy converter (WEC) featuring a floating sphere and a submerged annular heave plate, connected by a power take-off (PTO) system. Utilising linear wave theory, we derive the system's frequency-domain response to regular plane waves and analyse the impact of varying disk porosity on power generation. Our results suggest that annular disks can enhance power extraction efficiency in various cases compared with solid heave plates. Additionally, permeable plates can broaden operational conditions by reducing oscillation amplitudes and decreasing the mechanical strain on the PTO system without substantially compromising the power conversion efficiency. …

Occulation Observations With Event-Based Vision Sensors [ Poster ], Rachel Oliver, Paul Rickerhauser, Brian Mcreynolds

Faculty Publications

Event-based vision sensors (EVS) offer exceptional change detection capabilities due to their asynchronous and independent pixels which record binary events with changes in their photocurrent. The resulting address event representation data is a sparse timeseries list.

Cryogenic Gas Cell For Infrared Space Instrumentation, Trent Newswander, Scott Bailey, Mark Hervig, Phillip Scott, Ryan Luder, Mike Watson, Mike Oksness, Cody Secrist, Zack Hatfield

Space Dynamics Laboratory Publications

The Doppler Wind and Temperature Sounder (DWTS) is being developed for flight on NASA’s Dynamical Neutral Atmosphere-Ionosphere Coupling (DYNAMIC) satellite. DWTS will view the Earth limb orthogonal to the spacecraft ram and uses gas-filter correlation radiometry to detect the Doppler shift of atmospheric emission. The observations yield horizontal winds and kinetic temperature with high precision, excellent spatial resolution, and altitude coverage from 40–250 km. DWTS detects Doppler shifting of NO and 13CO2 atmospheric emission lines by passing the incident light through an onboard cell containing both gases that is cooled to near cryogenic temperatures. This work describes the DWTS instrument, …

A Feasibility Study Into The Usability And Application Of An Unmanned Aerial Vehicle For Aircraft Inspection And Quality Assurance Inspections, Reece P. Bhave

Journal of Aviation Technology and Engineering

The global aviation industry is often characterized as one of the safest modes of transportation in the modern world. With an abundance of quality assurance inspections and checks to determine operations safety, modern-day commercial aircraft that are utilized for passenger and cargo flights are held to a higher safety standard defined by regulatory bodies, such as the Federal Aviation Administration in the United States of America and the European Union Aviation Safety Agency in the European Union. While these quality standards are maintained via a series of inspections, checks, and preventative maintenance procedures, they are limited to only visual or …

Self-Organization In Metal Plasticity: An Ilg Update †, Avraam Konstantinidis, Konstantinos Spiliotis, Amit Chattopadhyay, Elais C. Aifantis

Michigan Tech Publications

In a 1987 article of the last author dedicated to the memory of a pioneer of classical plasticity Aris Philips of Yale, the last author outlined three examples of self-organization during plastic deformation in metals: persistent slip bands (PSBs), shear bands (SBs) and Portevin Le Chatelier (PLC) bands. All three have been observed and analyzed experimentally for a long time, but there was no theory to capture their spatial characteristics and evolution in the process of deformation. By introducing the Laplacian of dislocation density and strain in the standard constitutive equations used for these phenomena, corresponding mathematical models and nonlinear …

Energy-Aware Optimal Reconfiguration Of A Heterogeneous Connected And Automated Vehicle Cohort On A Limited-Access Highway, Pruthwiraj Santhosh, Darrell Robinette, Daniel Knopp, Jeffrey Naber, Jungyun Bae

Michigan Tech Publications

This paper presents an optimized vehicular reordering methodology designed to minimize energy consumption within heterogeneous cohorts operating at constant velocity on limited-access highways. The approach addresses the challenge of optimizing vehicle sequencing by considering both aerodynamic drag reduction benefits and the energy costs of reconfiguring a cohort from a stochastic initial state. This study provides empirical validation through on-road vehicle tests, demonstrating significant energy savings, achieving up to 10% reduction in axle energy for optimally configured cohorts compared to independent operation. A System of Systems (SoS) simulation environment, integrating micro-traffic, validated powertrain, and aerodynamic drag reduction models, was developed to …