Aerospace Engineering Commons^™

Microalgae Sorption Of Ten Individual Heavy Metals And Their Effects On Growth And Lipid Accumulation, Eric M. Torres

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study is to determine the potential microalgae have for being a heavy metal remediation tool. Heavy metals are naturally occurring elements that can be found inside the earth or on its surface. Typically, heavy metals are found naturally at low concentrations. However, through human activities, heavy metals are continually making their way to the surface and being concentrated. This happens largely through mining and manufacturing operations. For example, NiCd batteries produce waste containing nickel and cadmium, and paper manufacturing produces waste containing high levels of lead. As underdeveloped nations continue to industrialize and the world population …

Development Of A Three-Dimensional High-Order Strand-Grids Approach, Oisin Tong

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The strand-Cartesian grid approach is a unique method of generating and computing fluid dynamic simulations. The strand-Cartesian approach provides highly desirable qualities of fully-automatic grid generation and high accuracy. This work focuses on development of a high-accuracy methodology (high-order scheme) on strand grids for two and three dimensions.

In this work, the high-order scheme is extended to high-Reynolds number computations in both two and three dimensions with the Spalart-Allmaras turbulence model and the Menter SST turbulence model. In addition, a simple limiter is explored to allow the high-order scheme to accurately predict discontinuous flows.

Extensive verification and validation is conducted …

Effects Of Radiation Heating On Additively Printed Hybrid Fuel Grain Oxidizer-To-Fuel Ratio Shift, Stephen L. Merkley

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis examined the hypothesis that radiative heat transfer in small-scale printed-fuel hybrid rocket motors is responsible for the observed decreasing oxidizer-to-fuel (O/F) ratio shift. The magnitude of the radiation term was negligible for the motor sizes and types of propellants that have been previously tested, but was reintroduced in this study. To prove this hypothesis, a detailed enthalpy balance model was developed and tested using experimental fuel regression rate data obtained from a variety of motor scales using additively-manufactured acrylonitrile butadiene styrene (ABS) fuel grains.

Investigating The Effect Of Capping Layers On Final Thin Film Morphology After A Dewetting Process, Benjamin C. White

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nanoparticles on a substrate have numerous applications in nanotechnology, from enhancements to solar cell efficiency to improvements in carbon nanotube growth. Producing nanoparticles in a cheap fashion with some control over size and spacing is difficult to do, but desired. This work presents a novel method for altering the size and spacing of nickel and gold nanoparticles. Dewetting is a methodology to reduce thin films to an ensemble of discrete droplets. The introduction of alumina capping layers to thin nickel films during a pulsed laser-induced dewetting process has yielded reductions in the mean and standard deviation of radii and pitch …

High Power Rocket Design Report, Laura E. Calcara, Monica Fernandez, Chris Green, Trent Hosokawa

Honors Thesis

Highpower rockets are extremely sensitive systems that require precise planning, testing, and analysis in order to yield accurate results. Under the guidance of project advisor, Dan Larson, a highpower rocket was designed and built to reach an apogee of 3000 feet. Additionally, means of dual deployment was used in order to aid in the safe descent and recovery of the rocket. In order to meet this expectation, two parachutes were used in conjunction with black powder ejection charges. Compliance with the safety standards of NAR and NFPA was met for the ejection system used in dual deployment. To ensure that …

Phased Array Antenna Investigation For Cubesat Size Satellites, Kien Dang

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science Morehead State University in Partial Fulfillment of the Requirements for the Degree Master of Science by Kien Dang on April 18, 2016.

Software Defined Multi-Spectral Imaging For Arctic Sensor Networks, Sam B. Siewert, Matthew Demi Vis, Ryan Claus, Vivek Angoth, Karthikeyan Mani, Kenrick Mock, Surjith B. Singh, Saurav Srivistava, Chris Wagner

Publications

Availability of off-the-shelf infrared sensors combined with high definition visible cameras has made possible the construction of a Software Defined Multi-Spectral Imager (SDMSI) combining long-wave, near-infrared and visible imaging. The SDMSI requires a real-time embedded processor to fuse images and to create real-time depth maps for opportunistic uplink in sensor networks. Researchers at Embry Riddle Aeronautical University working with University of Alaska Anchorage at the Arctic Domain Awareness Center and the University of Colorado Boulder have built several versions of a low-cost drop-in-place SDMSI to test alternatives for power efficient image fusion. The SDMSI is intended for use in field …

The Design Of A Racing Simulator: A Three-Phase User Testing Approach, Jakob E. Rouleau, Eric J. Wach

Human Factors and Applied Psychology Student Conference

No abstract provided.

Ergonomics In Space Flight – Past, Present, & Future, Robert Consolo

Human Factors and Applied Psychology Student Conference

From the days of “The Rocket Men” to the uprising of SpaceX, spaceflight has always inspired awe in humanity. If you examine the men that were apart of those first missions, you will find that they were not only the most capable, but won the genetic lottery to become this nations first astronauts. Looking to the times of Mercury, you see the extreme constraints that potential astronaut candidates had to meet in order to go to space. Aside from the rigorous medical testing, potential candidates also had to meet strict height and weight requirements. Early candidates could not be taller …

Designing A Mobile Space Habitat Analog, Victor Kitmanyen, Matthew Burkhard, Timothy Disher

Human Factors and Applied Psychology Student Conference

No abstract provided.

Design Of A Master Cutdown Payload For High-Altitude Balloon Applications, Bradley Henderson

Research Horizons Day Posters

No abstract provided.

The Effect Of Golden Pothos In Reducing The Level Of Colatile Organic Compounds In A Simulated Spacecraft Cabin, Matthew Ursprung

Research Horizons Day Posters

No abstract provided.

Drag Reduction Utilizing Driven Micro-Cavities, David W. Riggins

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A high-speed vehicle or device presents a surface configured to move through a fluid such that the fluid flows across the surface in a primary flow direction. The vehicle or device also presents a subsurface spaced inwardly from the surface, as well as a plurality of cavity-defining structures that project generally outwardly from the subsurface and extend along the subsurface generally transverse to the primary flow direction. The cavity-defining structures are spaced apart in the primary flow direction. Each adjacent pair of the cavity-defining structures and the subsurface at least in part cooperatively define a cavity therebetween. Fluid rollers or …

Preliminary Design Tools In Turbomachinery: Non-Uniformly Spaced Blade Rows, Multistage Interaction, Unsteady Radial Waves, And Propeller Horizontal-Axis Turbine Optimization, Yujun Leng

Open Access Dissertations

Turbomachinery flow fields are inherently unsteady and complex which makes the related CFD analyses computationally intensive. Physically based preliminary design tools are desirable for parametric studies early in the design stage, and to provide deep physical insight and a good starting point for the later CFD analyses. Four analytical/semi-analytical models are developed in this study: 1) a generalized flat plate cascade model for investigating the unsteady aerodynamics of a blade row with non-uniformly spaced blades; 2) a multistage interaction model for investigating rotor-stator interactions; 3) an analytical solution for quantifying the impeller wake convection and pressure wave propagating between a …

Utilization Of Trss To Assist Pilot’S Decision Making Process During Critical Runway Operations., Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Incorporation Of Gnss Multipath To Improve Autonomous Rendezvous, Docking And Proximity Operations In Space, Benjamin W. Ashman

Open Access Dissertations

Automated rendezvous and docking (AR&D;) operations are important for many future space missions, such as the resupply of space stations, repair and refueling of large satellites, and active removal of orbital debris. These operations depend critically on accurate, real-time knowledge of the relative position and velocity between two space vehicles. Unfortunately, Global Navigation Satellite System (GNSS) capabilities remain severely limited in close proximity to large space structures due to significant multipath effects and signal blockage. Although GNSS is used for the initial stages of approach, other instruments such as laser, radar and vision-based systems, are required to augment GNSS during …

Transfers To A Gravitational Saddle Point: An Extended Mission Design Option For Lisa Pathfinder, Andrew D. Cox

Open Access Theses

Any possible LISA Pathfinder extended mission will immediately follow the primary mission after completion of scientific observations and technical demonstrations in a Sun-Earth L1 libration point orbit. One extended mission concept with scientific appeal is a spacecraft path that includes multiple encounters with a gravitational equilibrium point. This point, also termed a saddle point, exists where the total gravitational acceleration sums to zero and is distinct from the five Lagrange points in the three-body problem. This investigation seeks a strategy to design such a path subject to a variety of constraints. Periodic, quasi-periodic, and manifold structures are explored to …

Phase Of Flight Identification In General Aviation Operations, Valentine Pascale Goblet

Open Access Theses

Identifying phases of flight in General Aviation can help in identifying safety events, which are events which may result in the aircraft being in a hazardous state. Unlike commercial operations that have well-defined phases of flight such as taxi, takeoff, climb, cruise, descent, approach, and landing, GA missions have more hard-to-identify phases of flight. For example, pilot training missions can involve multiple “touch-and-go” maneuvers, which make it difficult to define a distinct cruise phase during the patterns. Here, we present an algorithm to automatically identifying phases of flight in GA. The method includes an algorithm to tailor the phase of …

Dynamic Sensor Tasking And Imm Ekf Estimation For Tracking Impulsively Maneuvering Satellites, Arthur A. Lace

Open Access Theses

In order to efficiently maintain space situational awareness, care must be taken to optimally allocate expensive observation resources. In most situations the available sensors capable of tracking spacecraft have their time split between many different monitoring responsibilities. Tracking maneuvering spacecraft can be especially difficult as the schedule of maneuvers may not be known and will often throw off previous orbital models. Effectively solving this tasking problem is an ongoing focus of research in the area of space situational awareness. Most methods of automated tasking do not make use of interacting multiple model extended Kalman filter techniques to better track satellites …

An Experimental Comparison Of Diffuser Designs In A Centrifugal Compressor, Cam-Tu Jeanne Methel

Open Access Theses

The objective of this investigation was to compare the effects of two different diffuser vane geometries on the performance of a centrifugal compressor. Vaned diffusers are commonly used in aeroengines because they can achieve higher pressure recoveries than vaneless diffusers of similar size. Improving the diffuser’s pressure recovery and effectiveness can result in overall compressor performance benefits that are sought out by engine manufacturers looking to improve overall engine efficiency. An airfoil vane was tested and compared to a baseline wedge diffuser in the Purdue CSTAR research facility, where the centrifugal compressor used for this study is intended to be …

Unsupervised Learning Framework For Large-Scale Flight Data Analysis Of Cockpit Human Machine Interaction Issues, Abhishek B. Vaidya

Open Access Theses

As the level of automation within an aircraft increases, the interactions between the pilot and autopilot play a crucial role in its proper operation. Issues with human machine interactions (HMI) have been cited as one of the main causes behind many aviation accidents. Due to the complexity of such interactions, it is challenging to identify all possible situations and develop the necessary contingencies. In this thesis, we propose a data-driven analysis tool to identify potential HMI issues in large-scale Flight Operational Quality Assurance (FOQA) dataset. The proposed tool is developed using a multi-level clustering framework, where a set of basic …

Tadpole Orbits In The L4/L5 Region: Construction And Links To Other Families Of Periodic Orbits, Alexandre G. Van Anderlecht

Open Access Theses

The equations of motion in the Circular Restricted Three-Body Problem (CR3BP) allow five equilibrium solutions, that is, the Lagrange or libration points. Two of the five equilibrium solutions are the triangular or equilateral libration points, L4 and L 5. As the secondary gravitational body moves in its orbit about the larger mass, L4 and L5 lead and trail the secondary by 60 degrees, respectively. This investigation focuses on periodic solutions in the vicinity of the triangular libration points, specifically horseshoe and tadpole orbits. Horseshoe orbits are symmetric periodic solutions in the plane of primary motion encompassing both …

A Transfer Network Linking Earth, Moon, And The Triangular Libration Point Regions In The Earth-Moon System, Lucia R. Capdevila

Open Access Dissertations

In the near future, several space applications in the Earth-Moon system may require a spacecraft to hold a stable motion, but the transfer trajectory infrastructure to access such stable motions has not been fully investigated yet. The triangular libration points, L 4and L5, in the Earth-Moon system have long been thought of as ideal locations for a communications satellite. Recently, Distant Retrograde Orbits (DROs) and Near-Rectilinear Halo Orbits (NRHOs) near the Moon have been identified as motion of interest for manned and unmanned missions with a focus on operations in cislunar space. The triangular libration points, as well as …

Coupled Orbit-Attitude Mission Design In The Circular Restricted Three-Body Problem, Davide Guzzetti

Open Access Dissertations

Trajectory design increasingly leverages multi-body dynamical structures that are based on an understanding of various types of orbits in the Circular Restricted Three-Body Problem (CR3BP). Given the more complex dynamical environment, mission applications may also benefit from deeper insight into the attitude motion. In this investigation, the attitude dynamics are coupled with the trajectories in the CR3BP. In a highly sensitive dynamical model, such as the orbit-attitude CR3BP, periodic solutions allow delineation of the fundamental dynamical structures. Periodic solutions are also a subset of motions that are bounded over an infinite time-span (assuming no perturbing factors), without the necessity to …

Examining American Attitudes On The Use Of Military Drones, Todd Brandon

Political Science Theses and Capstones

Recent polls have revealed that Americans of both the political left and right support the use of military drones. This statement stands true among groups who traditionally do not support the use of military force. I hypothesize that people of a more liberal persuasion will be more concerned with whether or not the drone program endangers innocent civilians, while those of a more conservative view will be more concerned with the legality of conducting military drone strikes. I analyze data obtained from the Pew Research Center to examine people's attitudes on military drone strikes via framing theory. My hypothesis has …

Effects Of Curing Cycle And Loading Rates On The Bearing Stress Of Double Shear Composite Joints, Mateja Andrejic

Master's Theses

In the last few decades, there has been a shift to using more lightweight materials for the potential of fuel consumption reduction. In the Aerospace Industry, conventional metal structures are being replaced by advanced composite structures. The major advantage of an advanced composite structure is the huge reduction in the number of parts and joints required. Also composite materials provide better resistance to creep, corrosion, and fatigue. However, one cannot eliminate all the joints and attachments in an aircraft’s structure. Eliminating structural joints is impractical in present-day aircraft because of the requirements for inspection, manufacturing breaks, assembly and equipment access, …

Syllabus: Space Systems Engineering 122 (Satellites And Space Systems Ii), Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A syllabus created by Professor Bob Twiggs for Space Systems Engineering 122 (Satellites and Space Systems II) taught at Morehead State University in the Spring of 2016.

Nonlinear Analysis Of Balance Data In The Easter Seals Adult Day Services Population, Taylor Marie Schemmel

Honors Theses

81.1 million adults are expected to be affected by dementia in 2040. Individuals with dementia are twice as likely to fall as healthy individuals and three times as likely to sustain an injury during a fall. Unfortunately, current fall prevention techniques in place for cognitively healthy older adults are not as effective for those with dementia. The objective of this study was to examine balance differences between individuals of varying cognitive ability utilizing Easter Seals Adult Day Services. All study participants completed the Montreal Cognitive Assessment (MoCA). Clinical assessments were done in conjunction with static posturography data collection on a …

A Hybrid Position Feedback Controller For Bistable Structures, Mehmet R. Simsek

Mechanical & Aerospace Engineering Theses & Dissertations

Bistability is the property of structures showing the ability to attain two statically stable states. Due to dynamic and static advantages such as no energy demand at stable positions and providing higher deflections compared to a monostable structure, bistability may be appealing in control surface design for aircraft structures and load alleviation for wind turbine blades. The dynamics of bistable structures is nonlinear because of the snap-through occurring during the cross-well oscillation between two stable states. A new control strategy called hybrid position feedback control is developed based on the conventional positive position control to exploit linear dynamics of bistable …

Experimental Analysis Of Turbulent Structures And The Effects Of Non-Equilibrium On An Axial Vortex, Michael P. Thompson

Mechanical & Aerospace Engineering Theses & Dissertations

Examples of the axial vortex include, dust devils, trailing line aircraft wake vortices, and tornadoes. Some of these vortices can prove hazardous to individuals and property. This necessitates that studies be conducted to understand their structure and to attempt to develop mathematical models of the flow physics involved. A wide variety of experimental techniques have been used in the past to study the vortex, with flow visualization and hotwire anemometry being chosen for this experiment. There have been many inadequate mathematical models proposed in the past. The experimental results obtained were compared to the work of Ash, Zardadkhan and Zuckerwar …