Aerospace Engineering Commons^™

Effect Of Amino-Functionalization On Insulin Delivery And Cell Viability For Two Types Of Silica Mesoporous Structures, Abdollah Zakeri Siavashani, Masoumeh Haghbin Nazarpak, Fateme Fayyazbakhsh, Tayebeh Toliyat, Steven James Peter Mcinnes, Mehran Solati-Hashjin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Inorganic Mesoporous Structures Are a Class of Novel Biomaterials that Have Shown Practical Applications in Delivery of a Variety of Therapeutic Agents. in the Present Study, Two Mesoporous Structures Were Prepared, and the Effect of Surface Modification on their Insulin Delivery and in Vitro Cytotoxicity Was Evaluated. Morphological and Structural Characterizations of Silica Particles Were Accomplished by Different Analytical Techniques, Including Scanning Electron Microscopy, X-Ray Diffraction, Fourier Transform Infrared Spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) Surface Area Analyses. the Drug Loading Capacity and in Vitro Drug Release Behavior of Silica Structures Were Investigated under Simulated Gastrointestinal Conditions and Phosphate-Buffered Saline Solution …

Enhancement Of Volumetric Specific Impulse In Htpb/Ammonium Nitrate Mixed Hybrid Rocket Systems, Jacob Ward Forsyth

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Hybrid rocket systems are safer and have higher specific impulse than solid rockets. However, due to large oxidizer tanks and low regression rates, hybrid rockets have low volumetric efficiency and very long longitudinal profiles, which limit many of the applications for which hybrids can be used. This research investigates a method for increasing the volumetric efficiency and improving the form factor of hybrid rocket systems by a non-combustible load of solid oxidizer to the hybrid fuel grain. Including such oxidizers increases the regression rate of the fuel and lowers the amount of fluid oxidizer needed for optimal combustion. This type …

The Kinematics And X-Ray Emission Mechanism Of The Large-Scale Jet Of 3c 111, Devon Clautice

Theses and Dissertations

Relativistic jets are the most energetic manifestation of the active galactic nucleus (AGN) phenomenon. AGN jets are observed from the radio through gamma rays and carry copious amounts of matter and energy from the sub-parsec central regions out to the kiloparsec and often megaparsec scale galaxy and cluster environs. While most spatially-resolved jets are seen in the radio, an increasing number have been discovered to emit in the optical/near-IR and/or X-ray bands. Here we discuss a spectacular example of this class, the 3C 111 jet, housed in one of the nearest, double-lobed FR II radio galaxies known. We discuss new, …

Windshield Defrost And Deice Using Carbon Nanotube Composite, Santhosh Kumar Loganathan

Doctoral Dissertations and Master's Theses

Carbon nanotubes (CNT) are well known for their high thermal and electrical conductivities and can offer a great advantage by converting the applied electrical energy into instant heat with minimum energy loss. The goal of this research is to develop a very thin CNT layer sandwiched between two layers of glass substrate in order to generate instant heat through electrodes. The thin CNT layer is fabricated using the CNTRENETM solution, which is a mixture of single-walled nanotubes (SWNTs) (~75%), double-walled nanotubes (DWNTs), and multi-walled nanotubes (MWNTs) with an average CNT length of ~0.4 - 0.6 μm. The thin layer is …

Experimental Characterization And Simulation Of Carbon Nanotube Strain Sensing Films, Nagendra Krishna Chaitanya Tummalapalli

Masters Theses

Carbon Nanotubes (CNTs) have excellent mechanical, electrical and electromechanical properties. These properties led to a lot of novel applications. Due to change in electrical properties under mechanical loading, these composites have potential applications in strain sensors, when these are fabricated as films. CNT-based films are commonly fabricated using different physical and chemical techniques based on the property requirements governing those applications. In this work, CNT films were prepared using wet chemical based methods and chemical vapor deposition techniques.

Plasma chemical vapor deposition using microwave power is used in the first method to deposit films on silicon substrates, using Nickel film …

Optimization Methodology For Cvt Ratio Scheduling With Consideration Of Both Engine And Cvt Efficiency, Steven Beuerle

Masters Theses

A transmission ratio schedule is developed to optimize the fuel consumption for an automotive continuously variable transmission (CVT) connected to an internal combustion engine (ICE). Although the optimal operating line (OOL) generated from an engine brake specific fuel consumption (BSFC) map can be used to generate a CVT ratio schedule that yields maximum engine efficiency, it was found that OOL-based CVT ratio scheduling does not necessarily offer the best fuel economy because optimal CVT efficiency does not always correspond to OOL tracking. To develop a CVT ratio schedule that can offer the best fuel economy, a novel ratio-scheduling methodology is …

Analytical Modeling And Numerical Simulation Of A Thermoelectric Generator Including Contact Resistances, Shripad Dhoopagunta

Masters Theses

With increasing demand for energy harvesting systems, research has been conducted in different areas in which Thermoelectric Generators (TEG) find their way into the top of many available resources. Out of many energy harvesting systems available, TEGs are comparatively easier to study, to manufacture and also to comprehend while producing enough energy for applications they find use in. They are solid state devices, meaning; they do not have any moving parts and hence makes them durable. Most of the energy that goes out of the automobile as exhaust is reused to power the TEGs. In most of the works that’s …

Modeling And Analysis Of A Novel Imbedded Organic Thermal Cycle, Joel Maker Faure

Theses and Dissertations

A thermal cycle is a device that converts thermal energy into work energy. There is a strong need in the United States and the world for a cycle that can have viable performances with low-grade temperature heat sources to increase the supply of power generation. There are many cycles with different configurations, however most do not involve mixing. Generally speaking this is due to modeling difficulties with multiple constituents, phases, and the technology available that lose performance under these mixed conditions. The gap in technology for mixed flow and phase components is getting smaller due to the need. Current cycles …

Flight Test Evaluation And Analysis Of The Wingbug: A Miniature Air Data Computer And Inertial Measurement Unit, Matthew Knight Rhoney

Theses and Dissertations

The prototype WingBug was an innovative concept by Straight & Level Technologies to measure airspeed, altitude, temperature, Euler angles, angular rates, and acceleration information. The unit was portable, self-powered, streamed data via WiFi to any tablet or smart phone in the cockpit, and cost less than $1000. It measured 8”x3”x3”, weighed 6 ounces, and used a GoPro mount to attach externally to any aircraft. This thesis covers results from the initial flight test program flown at the Florida Institute of Technology in 2016. The WingBug was flown on a Piper Warrior. Data from the WingBug were compared to “truth” data …

Cooling Performance Of Reciprocating Aircraft Engines: A Quantitative Analysis Of 14 Cfr Part 23 Certification Requirements, Kevin Andrew Stuth

Theses and Dissertations

An analysis of the Federal Aviation Administration (FAA) aircraft certification requirements has revealed a potential error in the temperature correction formula the FAA requires aircraft manufacturers to use to process engine cooling performance data for compliance with Part 23 of Title 14 of the Code of Federal Regulations (14 CFR Part 23). The FAA engine cooling performance temperature correction formula, which predicts the critical temperature of engine components, was quantitatively evaluated using data acquired with a single-engine aircraft powered by a normally-aspirated, air-cooled, reciprocating engine. Previous research has failed to analyze the effect ambient air temperature has on oil temperature …

Development Of Fault Tolerant Adaptive Control Laws For Aerospace Systems, Andres E. Perez Rocha

Doctoral Dissertations and Master's Theses

The main topic of this dissertation is the design, development and implementation of intelligent adaptive control techniques designed to maintain healthy performance of aerospace systems subjected to malfunctions, external parameter changes and/or unmodeled dynamics. The dissertation is focused on the development of novel adaptive control configurations that rely on non-linear functions that appear in the immune system of living organisms as main source of adaptation. One of the main goals of this dissertation is to demonstrate that these novel adaptive control architectures are able to improve overall performance and protect the system while reducing control effort and maintaining adequate operation …

Coupled Fluid-Structure Interaction Modeling Of A Parafoil, Brandon Burnett

Doctoral Dissertations and Master's Theses

In the summer of 2014, Performance Designs, Inc. contacted Embry-Riddle Aeronautical University’s Eagle Flight Research Center to lead an investigation on square parachute design and optimization using modern computational methods to reduce costs in experimental testing. This thesis investigates the foundation for using an implicit fluid-structure interaction computational model to tackle the challenges of modeling a highly-flexible, porous fabric for design optimization of a parafoil parachute’s transient performance. Canopy deformations of a single-cell square parafoil using a fluid-structure interaction (FSI) model with nonlinear material modeling is compared to an experimental setup of matching geometry. The results of this thesis yielded …

Effect Of Flow-Acoustic Resonant Interactions On Aerodynamic Response Of Transitional Airfoils, Joseph Hayden

Doctoral Dissertations and Master's Theses

A high-accuracy numerical study is conducted to examine the impact of flow-acoustic resonant interactions on the aerodynamic response of symmetric and cambered airfoils in the realistic transitional flow regimes with Rec=140,000 and M=0.0465 as well as the low Reynolds number flow regime with Rec=10,000 and M=0.2. The symmetric NACA-0012 and the cambered SD7003 airfoils are investigated at various angles of attack that have been found previously to include both the tone and no-tone producing regimes, with specific focus on the aerodynamic lift response. Additional simulations are conducted with a low-intensity synthetic turbulence introduced upstream of the airfoils in order to …

Effect Of Slot Span On Wing Performance, Juan F. Granizo

Doctoral Dissertations and Master's Theses

This report presents new numerically-derived correlations to estimate the aerodynamic properties of a three-dimensional wing that features a partial to full span fixed slot. Fixed slots have been thoroughly studied in the past with regards to their operation and the relation between slot geometry and wing performance. There have also been many studies on the advantages and disadvantages of tip-slotted wings and the comparison between these and full-slotted wings. Up to this point however, a study on the effects of slot span on wing performance has not been performed. Effect of slot span on wing performance is evaluated in an …

Model Predictive Control Of A Nonlinear Aeroelastic System Using Volterra Series Representations, Wai Leuk Law

Doctoral Dissertations and Master's Theses

The purpose of this study is to investigate the potential effectiveness of using a Volterra-based Model Predictive Control strategy to control a nonlinear aeroelastic system. Model Predictive Control (MPC), also known as Receding Horizon Control (RHC), entails computing optimal control inputs over a finite time horizon, applying a portion of the computed optimal control sequence, and then repeating the process over the next time horizon. The Volterra series provides input-output models of a dynamical system in terms of a series of integral operators of increasing order, where the first-order Volterra operator models the linear dynamics and the higher-order operators model …

More Electric Systems Architecture Effect On Business Jet Performance, Kelsey M. Mazur

Doctoral Dissertations and Master's Theses

A more-electric systems architecture, using current state of the art components, is proposed for the business jet Dassault Falcon 2000. A model of the existing aircraft, both of its overall flying characteristics and performance and of its detail systems layout, is created using Pacelab APDc and SysArcc programs. The model is validated with respect to the aircraft published data. Then, another model of the same aircraft is created but, this time, it is for the aircraft with the new architecture and their respective performance is compared. In particular, this results in changes in mission range and the overall system's weight. …

A Detailed Uncertainty Analysis Of Heat Transfer Experiments Using Temperature Sensitive Paint, Anish Prasad

Doctoral Dissertations and Master's Theses

Heat transfer experiments for different cooling techniques for a gas turbine blade are performed and the data are collected via temperature sensitive paint, ammeter, thermocouple and manometer measurement techniques. These data are subjected to uncertainty analysis and the major contributing parameter in the uncertainty is found. A tool to identify the major contributing parameter is devised to reduce the uncertainty in the experiment. Further the effect of temperature difference (surface temperature to bulk temperature) is studied to determine the impact on uncertainty and to determine its importance. The analysis between various implementations of the student’s t distribution are conducted to …

Performance Characterization Of Ceramic Matrix Composites Through Uniaxial Monotonic Tensile Testing, Jóhannes Pétursson

Doctoral Dissertations and Master's Theses

Ceramic matrix composite (CMC) samples were tested in order to characterize their mechanical performance and provide metrics for material process refinement and component design. Monotonic, uniaxial tensile testing of an uncoated carbon fiber reinforced silicon carbide ceramic at room temperature was performed following ASTM standard C1275 to measure ultimate tensile strength and elastic modulus. Equipment verification was carried out through alignment measurement with a gaged tensile specimen using ASTM E1012 to ensure the monotonic nature of the testing equipment. Tensile strength data was treated with Weibull statistical models to produce A and B-basis strength properties for design values.

An alternative …

Configuration Validation Of A Novel In-Space Propellant Storage And Transfer System, Priyadarshan Sundararaju

Doctoral Dissertations and Master's Theses

The concept of developing a new technology for on-orbit storage and refueling system has been a great interest among scientists for many decades. This study is about Centaur-based on-orbit propellant storage and transfer. This system takes the advantage of rotational settling to a simple fluid management (FM) system. Specifically, enabling settled fluid transfer and settled pressure control between two tanks. This thesis work focuses on configuration and validation of static and dynamic stability, mass gauging and CFD analysis of the rotational propellant transfer method in space. The application of this technology in Low Earth Orbit (LEO) and Geo-Synchronous Orbit (GEO) …

Turbulence Control In Wall Jets, Jonathan Latim

Doctoral Dissertations and Master's Theses

The turbulent boundary layer has been the focus of many studies over the last century or so due to its engineering significance. Recent studies have shown that the turbulent boundary layer encapsulates extremely energetic large-scale structures which play a much more significant role in its dynamics than has been previously thought. Further, these large scales amplitude and frequency modulate the finer scales of turbulence. This offers a path to control wall turbulence by controlling the large-scales of the flow. The focus of this thesis is to establish ways to manipulate the energy of the large-scale structures in a model turbulent …

Determination Of Aqueous Surfactant Solution Surface Tensions With A Surface Tensiometer, Remelisa Esteves, Birce Dikici Ph.D, Matthew Lehman, Qayyum Mazumder, Nonso Onukwuba

Beyond: Undergraduate Research Journal

Surfactant solutions are applicable to engineering systems for cooling equipment for electronics. Surfactants can be added to water to improve heat transfer. An application of using aqueous surfactant solutions can be through microchannel heat sink. Although it is ideal to redesign these systems to reduce heat, it is a costly method. Surfactant solutions at optimal solution concentration can be able to transfer heat quickly and effectively with minimum expense. The surface tension of surfactant solutions is an important parameter for boiling heat transfer and must be taken into consideration. The purpose of this research is to measure surface tension of …

Determination Of Surfactant Solution Viscosities With A Rotational Viscometer, Remelisa Esteves, Nonso Onukwuba, Birce Dikici Ph.D

Beyond: Undergraduate Research Journal

Aqueous surfactant solutions are used in engineering systems for improving boiling heat transfer. The purpose of this research is to determine the viscosities of surfactant solutions and to investigate the effect of composition on viscosity. The results obtained can possibly be used as reference for further study in the effects of surfactant solution viscosities on nucleate boiling. A rotational viscometer was used to determine the viscosities of three surfactant solutions – SLS, EH-14, and SA-9 – of various compositions at room temperature. It was discovered that the viscosities of SLS, EH-14, and SA-9 had a nearly consistent pattern as their …

Commercial Space Situational Awareness (Ssa) Capabilities And Their Benefits For Civilian Space Traffic Management (Stm), Mark A. Skinner

Space Traffic Management Conference

Paralleling (but lagging) satellite development, SSA, long the sole domain of sophisticated militaries, now includes commercial providers. These commercial capabilities, identified as beneficial to the sustainable use of outer space[1], have demonstrated technical sophistication sufficient to positively contribute to the mitigation of satellite interference and provide actionable SSA information. Utilizing small optical telescopes, these entities are able to determine the orbits of objects in the geosynchronous orbit (GSO) to sizes as small as 1 m², with measured positional uncertainties of 10s of meters, on the order of the size of a modern communications satellite. These techniques …

Spaceways: Airspace In Outer Space, Scott Haeffelin

Space Traffic Management Conference

Forecasted future demand in space travel is driving the need for the development of space traffic management. Currently, orbital space traffic is mostly unregulated with internationally agreed upon best practices and self-interest driving space operators to avoid collisions with other spacecraft. This paper explores the future of space travel by presenting a concept of creating “airspace in space” or spaceways to manage the ever growing volumes of space traffic. Spaceways are analogous to airspace for aircraft with the goal of increasing levels of safety and reducing probabilities of collision. These goals can be achieved by creating traffic rules, defining valuable …

A Novel Approach For Controlled Deorbiting And Reentry Of Small Spacecraft, Larry H. Fineberg, Justin Treptow, Timothy Bass, Scott Clark, Yusef Johnson, Bradley Poffenberger

Space Traffic Management Conference

No abstract provided.

Space Analysis And Research Centers (Sparcs) For Ssa Data And Analytics, Phillip Cunio, Brien Flewelling

Space Traffic Management Conference

Widespread use of massive data and increasing reliance on spaceborne infrastructure are two of the emerging megatrends of the early 21^st century. However, both come with liabilities: movement and processing of large data volumes is very expensive, and reliance on spaceborne infrastructure adds risk that problems in the still incompletely-understood space domain might cause work disruptions.

ExoAnalytic proposes the use of Space Analysis and Research Centers (SpARCs) as a way to begin addressing both these issues. A SpARC is a facility which integrates volumes of data collected on satellites, centrally analyzes it, and makes available resulting useful information. The …

Examining Time To Evacuate Dynamically Activated Aircraft Hazard Areas, Zheng Tao, Granghuai Wang, Ashley G. Williams, Jon L. Semanek, Jonathan L. Schwartz

Space Traffic Management Conference

The growth in launch and reentry operations in the National Airspace System (NAS) presents the Federal Aviation Administration (FAA) with the challenge of integrating them more efficiently while also minimizing effects on other NAS users and maintaining safety. Currently, to maintain safety and account for unforeseen events such as vehicle breakup, the FAA segregates large amounts of airspace, called Aircraft Hazard Areas (AHAs), from traditional NAS users during launch and reentry operations. In order to minimize effects on NAS users, some AHAs during reentry are dynamically activated only if an unexpected event occurs. If a dynamic AHA is activated, then …

Air Traffic Impact Analysis Design For A Suborbital Point-To-Point Passenger Transport Concept, Tanja Luchkova, Sven Kaltenhaeuser, Frank Morlang

Space Traffic Management Conference

Space flight activities are growing on an international level, thereby creating an evident need for a safe and efficient integration of space vehicle operations into the air traffic system. For concepts like very high-speed intercontinental passenger transport via suborbital point-2-point flights, as it is proposed by the DLR SpaceLiner, this integration issue is becoming especially relevant. As part of a case study approach to analyse the effects of space vehicle operations on air traffic and to evaluate mitigation strategies and optimized ATM integration, a traffic impact analysis has been prepared and conducted for the SpaceLiner return trajectory towards a European …

Finite Element Simulation Of Pzt-Aided Interrogation Of Composite Laminates Exhibiting Damage, Amany Micheal, Yehia Bahei-El-Din

Centre for Advanced Materials

Piezoelectricity has proved effective in capturing changes in structures caused by various damage mechanisms. In one approach, piezoelectric wafer active sensors (PWAS) are mounted on the surface of the host structure and utilized as both actuators and sensors to interrogate the structure and monitor its health. This is achieved by subjecting the PWAS to a transient electric pulse and reading the resulting voltage. Changes in the stiffness of the substrate due to structural damage affect the response of the PWAS, which could be correlated to integrity of the structure. Applying this technique to fibrous composite laminates encounters particular challenges due …

Aircraft Decelerating And Stopping Systems, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1572070) held at Minnesota State University, Mankato Wiecking Center Auditorium at 18:30 CST on Thursday, November 10, 2016.