Aerospace Engineering Commons^™

Test And Evaluation Of An Artec Leo 3d Scanner, Chelsea Alexis Reichard

Theses and Dissertations

With new and innovative technologies, companies have begun utilizing 3-Dimensional Scanners to reverse engineer objects of virtually any size or complexity. These scanners increase efficiency, allowing companies to import physical items into the computer without the hassle of modeling it themselves in Computer Aided Design (CAD) software. Although these highly advanced devices can be very fast and effective, we will be studying the surfaces that are incompatible to these scanners. The study performed in this research will test the limitations of a new, highly advanced, wireless 3D Scanner; The Artec Leo. For many scanners, including the one used in this …

Closed-Loop Propulsive Control For Very Low Perigee Orbit Energy Management And Stabilization, Tyler J. Gardner

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Within the past decade, the United States Air Force has begun exploring options for using smaller satellites, known as SmallSats and CubeSats, to decrease the time it takes to design and build new satellites. If used properly, a rapid development environment for satellites could improve the Air Force's ability to respond to new technologies and threats. Other organizations such as NASA and universities have been using SmallSats and CubeSats for research and development missions.

While smaller satellites are usually much cheaper to develop and require less time to create, limited volume strictly constrains the size of instrumentation and avionics that …

Analytic Guidance Strategies For Passively Safe Rendezvous And Proximity Operations, Simon Shuster

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A safety ellipse is a type of relative motion trajectory that is commonly used for unmanned rendezvous and proximity operations. As the name suggests, safety ellipses are passively safe relative motion trajectories, which means that their natural motion inherently maintains a low collision risk. The focus of this dissertation is the derivation, analysis, and application of guidance strategies that reconfigure, establish, and exit a safety ellipse. The guidance strategies consist of a set of ∆v vectors and impulse times, all written in closed form. Through applications of optimal control theory and parameter optimization, it is shown that these maneuver …

The Effect Of Compaction Temperature And Pressure On Mechanical Properties Of 3d Printed Short Glass Fiber Composites, Pushpashree Jain Ajith Kumar Jain

Mechanical & Aerospace Engineering Theses & Dissertations

Among many thermoplastics that are used in engineering, polyamide 6 (nylon 6) is an extremely versatile engineering thermoplastic. Nylon filled with glass fibers has higher mechanical strength and high wear resistance than general purpose nylon. 3D printed composites, based on fused filament modeling, typically suffer from poor bead-to-bead bonding and relatively high void content, limiting their mechanical properties

This thesis explores the effect of compaction pressure and temperature on improving the mechanical properties of 3D printed composites. Engineering moduli in the printing and transverse to printing direction, as well as ultimate strength were measured using the tensile testing with Digital …

Flight Tests Of Trajectory Energy Management Systems Using A Vertical Takeoff And Landing Vehicle, Emils Senkans

Theses and Dissertations

The rise of new aircraft propulsion methods (e.g. powered by batteries, fuel cells or hybrid electric systems), the increased use of automated and integrated flight control systems, and the envisioned use of personal Vertical Takeoff and Landing (VTOL) vehicles in urban environments (urban aerial mobility) leads to novel technical and regulatory challenges for aircraft manufacturers, certification authorities and operators. Of primary concern is operational safety, and closely connected pilot situation awareness and workload. A particular safety factor for operating VTOL vehicles that depend on propulsive lift for the majority of their operations and that are operated over urban terrain, is …

Experimental Analysis Of Heat Generation In Carbon, Mounisha Ganesan

Doctoral Dissertations and Master's Theses

The purpose of this research is to study a novel non-covalent functionalization technique of single-walled carbon nanotubes (SWCNTs) and to examine the feasibility of using carbon nanotube films as thin film heaters. We developed a unique methodology to synthesize a well dispersed, environmentally friendly solution of CNTs that could be easily spin coated as well as spray coated on different substrates based on the application. Using the produced solutions, thin films of SWCNTs were fabricated on a glass substrate. Two sets of experiments were conducted to study the influence of polyaromatic moiety and the pH on the electro thermal characteristics …

Analysis Of After Impact Characteristics And Structural Optimization Of Cfrp Composite Plate, Zhennan He

Doctoral Dissertations and Master's Theses

Low-velocity impact (LVI) on composites may cause Barely Visible Impact Damage (BVID), which is one of the most common damage types and may result in a decrease in strength of the composite. The objectives of this research were (a) to identify the characteristics of a carbon/epoxy composite plate after low-velocity impact, (b) to create a validated model to simulate the impact process and progressive failure, and (c) to perform sizing and shape optimization of the laminate for improving the damage resistance of the plate. As a part of this thesis, composite plates were fabricated using carbon fiber reinforced polymer (CFRP) …

Foundations Of The Geometric Mechanics Udwadia-Kalaba Framework For Rigid Body Constrained Motion Analysis, Brennan S. Mccann

Doctoral Dissertations and Master's Theses

Presented herein are multiple tools for constrained motion analysis extended to different dynamical frameworks. The Udwadia-Kalaba (UK) formalism for the constrained motion analysis of a point mass is a well-documented and applied methodology. Here, UK formulation is generalized to the dynamics of rigid bodies on nonlinear manifolds in the geometric mechanics framework. This approach simultaneously treats rotational and translational motion in a unified method without encountering singularites or non-uniqueness, issues that would arise were attitude parameterization sets used. The viability of this geometric mechanics UK formalism is demonstrated for the cases of fully and underconstrained systems. The nominal UK formalism …

Parametric Analysis Of Particle Spreading With Discrete Element Method, Yuxuan Wu

Doctoral Dissertations and Master's Theses

The spreading of metallic powder on the printing platform is vital in most additive manufacturing methods, including direct laser sintering. Several processing parameters such as particle size, inter-particle friction, blade speed, and blade gap size affect the spreading process and, therefore, the final product quality. The objective of this study is to parametrically analyze the particle flow behavior and the effect of the aforementioned parameters on the spreading process using the discrete element method (DEM). To effectively address the vast parameter space within computational constraints, novel parameter sweep algorithms based on low discrepancy sequence (LDS) are utilized in conjunction with …

Flexible Strain Detection Using Surface Acoustic Waves: Fabrication And Tests, Rishikesh Srinivasaraghavan Govindarajan

Doctoral Dissertations and Master's Theses

Over the last couple of decades, smart transducers based on piezoelectric materials have been used as sensors in a wide range of structural health monitoring applications. Among them, a Surface Acoustic Wave sensor (SAW) offers an overwhelming advantage over other commercial sensing technologies due to its passive, small size, fast response time, cost-effectiveness, and wireless capabilities. Development of SAW sensors allows investigation of their potential not only for measuring less-time dependent parameters, such as pressure and temperature, but also dynamic parameters like mechanical strains. The objective of this study is to develop a passive flexible SAW sensor with optimized piezoelectric …

Numerical Analysis Of Multi-Functional Surface Acoustic Wave Sensor, Xin Xu

Doctoral Dissertations and Master's Theses

A surface acoustic wave (SAW) sensor can have broad industrial applications due to its compact size, low cost-effectiveness, and versatility of sensible measurands, as well as the wireless capabilities. In this study, a theoretical modeling approach accompanied by a MATLAB-based algorithm of the SAW device is first presented. With the designed dimensional parameters and selected material properties, numerical analyses are performed using COMSOL Multiphysics to validate the theoretical results. Various postprocessing responses of the propagated SAWs in both time and frequency domains, such as time delay, insertion loss, and frequency shift, are examined to evaluate the device performances. Also, the …

A Comparison Of Pid And Sliding Mode Controllers When Applied To The Orbit Raising Of A Satellite Using Solar Sail Propulsion, Kayla Marie Ormiston

Doctoral Dissertations and Master's Theses

Solar Sail spacecraft have become increasingly popular due to their ability to perform long term missions without the need for propellant. Because solar sail propulsion is so unique, most research has been focused on developing new mechanical control techniques. However, it can be argued that more advanced control algorithms can be used to mitigate the shortcomings of commonly used control actuators, specifically reaction wheels, when applied to solar sails. This thesis will research how a sliding mode controller compares to a PID controller with respect to settling time and state response error over a range of maximum reaction wheel torque …

Constrained Motion Analysis Of Spacecraft Trajectory In Restricted Three Body Problem, Harshkumar Patel

Doctoral Dissertations and Master's Theses

Due to the popularity of libration points, many satellites are being maintained on their desired trajectory. Indian space research organization has planned to launch the Aditya-L1 spacecraft to study about the Sun by 2021. James Webb Space Telescope has also been designed to observe deep space at L2 in the Sun-Earth system by 2021. The combined gravity of the Earth and the Sun keep satellite’s orbit locked at libration points. Though satellites enjoys an uninterrupted view of Sun and Earth all the time, they are affected by the solar radiation pressure (SRP) continuously. Due to the instability of collinear libration …

Laser-Based Interfacial Patterning Enables Toughening Of Cfrp/Epoxy Joints Through Bridging Of Adhesive Ligaments, Ran Tao, Xiaole Li, Arief Yudhanto, Marco Alfano, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The ability to prevent catastrophic failures in secondary bonded CFRP adhesive joints is important for reliable automotive and aerospace structures. In a previous study, we proposed an innovative damage-tolerant interfacial design concept for adhesively bonded composite joints, which relied on the extrinsic dissipation of bridging adhesive ligaments enabled by controlling the adhesion at CFRP/epoxy interfaces. In this work, we experimentally validate this strategy by combining laser processing and mechanical testing using double cantilever beam (DCB) joints. Mechanical tests indicate that the pattern geometry, i.e., number and spacing of the areas with different adhesion, controls the formation of either single or …

Modular Framework For Implementation And Analysis Of Recursive Filters With Considered And Neglected Parameters, Kyle J. Demars, Kari C. Ward

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper develops novel covariance and square-root factor formulations of a consider-neglect Kalman filter for navigation applications. The proposed filter partitions system parameters into three distinct categories: those to be estimated by the filter, those whose contribution to the system are considered without being explicitly estimated, and those with sufficiently low effect on the system such that their contribution can be neglected altogether. Discussion on appropriate selection of parameters to be considered and neglected is provided with specific attention given to descent-to-landing navigation. Monte Carlo simulations and analysis are performed to assess the performance of the developed square-root consider-neglect filter …

Space-Based Countermeasure For Hypersonic Glide Vehicle, Robert Joseph Fowler Iv

Mechanical & Aerospace Engineering Theses & Dissertations

The purpose of this thesis is to investigate the effectiveness of a space-based laser weapon system for countering a hypersonic glide vehicle. Hypersonic glide vehicles are an emerging type of weapon system which combine the range of ballistic missiles with the maneuverability of cruise missiles. These systems pose a unique threat to military assets not only for their expanded capabilities but also for the lack of an effective defensive countermeasure. Space-based laser weapon systems may offer a solution to this problem. The dynamics of a space-based laser system defending against a hypersonic glide vehicle are modeled first. The governing equations …

Onboard Autonomous Controllability Assessment For Fixed Wing Suavs, Brian Edward Duvall

Mechanical & Aerospace Engineering Theses & Dissertations

Traditionally fixed-wing small Unmanned Arial Vehicles (sUAV) are flown while in direct line of sight with commands from a remote operator. However, this is changing with the increased popularity and ready availability of low-cost flight controllers. Flight controllers provide fixed-wing sUAVs with functions that either minimize or eliminate the need for a remote operator. Since the remote operator is no longer controlling the sUAV, it is impossible to determine if the fixed-wing sUAV has proper control authority. In this work, a controllability detection system was designed, built, and flight-tested using COTS hardware. The method features in-situ measurement and analysis of …

Parallelization Of The Advancing Front Local Reconnection Mesh Generation Software Using A Pseudo-Constrained Parallel Data Refinement Method, Kevin Mark Garner Jr.

Computer Science Theses & Dissertations

Preliminary results of a long-term project entailing the parallelization of an industrial strength sequential mesh generator, called Advancing Front Local Reconnection (AFLR), are presented. AFLR has been under development for the last 25 years at the NSF/ERC center at Mississippi State University. The parallel procedure that is presented is called Pseudo-constrained (PsC) Parallel Data Refinement (PDR) and consists of the following steps: (i) use an octree data-decomposition scheme to divide the original geometry into subdomains (octree leaves), (ii) refine each subdomain with the proper adjustments of its neighbors using the given refinement code, and (iii) combine all subdomain data into …

An Analysis Of The Benefits And Difficulties Of Aerial Magnetic Vector Navigation, Aaron J. Canciani, Christopher J. Brennan

Faculty Publications

Recent successful flight tests have demonstrated scalar magnetic anomaly navigation to be a viable GPS-alternative navigation system. These flight tests matched magnetic field measurements to maps of the Earth's crustal magnetic field in order to navigate. Scalar magnetic navigation uses only the magnetic field intensity, not direction, in order to navigate. While it appears obvious to extend aerial magnetic navigation to use the full vector field, in practice there are substantial obstacles to doing so. This article explores the key challenges of magnetic vector navigation including current sensor limitations, lack of high frequency magnetic vector maps of the Earth's crust, …

Development Of A Single Emitter Ionic Liquid Ion Source Research Platform, Thomas V. Kerber

Masters Theses

A single emitter ionic liquid ion source using porous borosilicate glass was developed. Two emitters with different radii of curvatures were tested using 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF₄). I-V curves of the currents on the extractor electrode and a collector plate were obtained for potential differences between the emitter and the extractor ranging from 0 V to 3500 V. For the first emitter chip, extraction began near 2400 V. The highest emission current measured on the first chip was 80 µA at 3500 V with an interception current on the extractor of 4.86 µA. An new collector plate was used …

Measuring Pilot Control Force In General Aviation: Strain Gauges And Load Cell, Benjamin David Wyma

Theses and Dissertations

Flight test requires a variety of sensors and data systems to accurately read variables on an aircraft during testing. One of these important variables is the pilots control force. Control force is used in many tests in flight test to ensure the aircraft being tested meets the required FAA standards. One essential test is stick free longitudinal stability where control force is needed to calculate the stick free neutral points of the aircraft [1]. The objective of the project was to explore two methods of electronically measuring control force and determining which method is best suited for Florida Institute of …

Existence Of Ballistic Capture Transfer Trajectories From Trans-Lunar Injection To Lunar Polar Orbit For All Lunar Phases At Time Of Departure, Anthony Lawrence Genova

Theses and Dissertations

This dissertation reveals several families of trajectories that can reduce the change in velocity(ΔV) required to transfer from trans-lunar injection (TLI) to a lunar polar circular orbit with 100 km altitude by up to 26.5% compared to conventional transfers. The primary hypothesis states that such trajectories, termed lunar polar ballistic capture (LPBC) transfers, exist for all lunar phases at the time of lunar departure (i.e., initial lunar flyby).The existence of LPBC transfers for all lunar phases can enable missions with ride-share restrictions (CubeSat), limited propellant capability (small spacecraft), and/or payloads that are not time sensitive (cargo).Evidence to support the primary …

Assessing Observer Stations For Cislunar Space Domain Awareness, Michael S. Rosenof

Theses and Dissertations

With renewed worldwide interest in cislunar space, the need for reliable domain awareness in that extended region of space is clear. This investigation quantifies the suitability of several possible stations for observer satellites in cislunar space by calculating the specific irradiance each would observe as they track satellites in various realistic lunar free-return trajectories across a decade, using reflected sunlight. This investigation includes one class of free return trajectories for target satellites, eleven distinct observer stations, and three different metrics for comparing the effectiveness of each observer station or combination of observer stations for sensing targets using reflected sunlight. The …

Experimental And Computational Analysis Of Progressive Failure In Bolted Hybrid Composite Joints, John S. Brewer

Theses and Dissertations

Composite materials are strong, lightweight, and stiff making them desirable in aerospace applications. However, a practical issue arises with composites in that they behave unpredictably in bolted joints, where damage and cracks are often initiated. This research investigated a solution to correcting the problem with composite bolted joints. A novel hybrid composite material was developed, where thin stainless steel foils were placed between and in place of preimpregnated composite plies during the cure cycle to reinforce stress concentrations in bolted joints. This novel composite was compared to control samples experimentally in quasi-static monotonic loading in double shear configuration in 9-ply …

Electro-Optic Satellite Constellation Design Using Multi-Objective Genetic Algorithm, Yasin Tamer

Theses and Dissertations

Satellite constellation design is a complex, highly constrained, and multidisciplinary problem. Unless optimization tools are used, tradeoffs must be conducted at the subsystem level resulting in feasible, but not necessarily optimal, system designs. As satellite technology advances, new methods to optimize the system objectives are developed. This study is based on the development of a representative regional remote sensing constellation design. This thesis analyses the design process of an electrooptic satellite constellation with regional coverage considerations using system-level optimization tools. A multi objective genetic algorithm method is used to optimize the constellation design by utilizing MATLAB and STK integration. Cost, …

Specifying Space Defense Operator Interfaces Through The Application Of Cognitive Systems Engineering And Prototyping, Justin E. Oryschak

Theses and Dissertations

The Department of Defense needs better tools to support its operators as they strive to defend its space assets. The growing sophistication of anti-satellite weapons increasingly challenges the nation’s orbital communications and surveillance infrastructure. Operators face difficulties gathering useful information and dealing with the complexity of potential enemy actions. This research applied cognitive systems engineering and ecological interface design (EID) methodologies to create a prototype space mission management tool that enhances operator situation awareness and decision-making ability. Applied cognitive task analysis interviews were used to document space operator decision-making in their domain. Model-based systems engineering was applied to integrate work …

Hexakis Icosahedron Frame-Skin Vacuum Lighter Than Air Vehicle, Brian Cranston, Anthony N. Palazotto

AFIT Patents

A vacuum lighter than air vehicle (VLTAV) includes a rigid frame of rods connected together to form a hexakis icosahedron. A membrane skin covers the rigid frame and defines therewith a vessel configured to hold an internal vacuum that allows the vessel to float in the air. The plurality of rods and membrane skin have weights and dimensions that result in a neutral and/or positive buoyancy for the vessel while preventing geometric instability.

Advanced Concepts For Multiengine Airplane Flying, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Webinar (GL15102159) held online at 9:00 CST on Saturday, November 21, 2020.

An Investigative Study Of Combustion And Emissions With Noise And Vibrations Of Synthetic Fuels Within An Aero-Gas Turbine, Camille J. Phillips

Honors College Theses

The pollution from the aerospace transportation is rapidly becoming the largest source of greenhouse gas (GHG) emissions. The FAA expects aviation emissions to almost triple by 2050, making the aerospace industry responsible for the release of approximately 25% of the global carbon dioxide budget. These aviation emissions, including CO2 and NOx, as well as other GHGs, contribute to the destruction of ozone layer. Carbon dioxide emissions have a particularly negative effect on humans, leading to airway diseases especially in children and elderly. To combat the addition of further GHG emissions into the atmosphere, it is necessary to minimize the usage …

A Ranking Method To Prioritize Vfr Airports To Be Provided With Instrument Approach Procedures, Marcelo Soares Leao, Gustavo A.M. Ortegal Leal, Fabio Rodrigues Paukoski Fernandes

Graduate Student Works

The primary purpose of this work is to investigate the necessity of a more comprehensive and systematic method to prioritize airports to be provided with instrument approach and landing procedures in the Brazilian air transportation landscape. An overview of the main contributors to risks associated with the approach and landing phases is provided, covering the most important aspects of unstable approaches and CFIT events. Considering the emergence of Terrain Awareness and Alerting Systems (TAWS), the role of its contribution to safety is discussed, as well as the certification context related to the design, installation, and operation of those systems. A …