Synergic Production Scheduling Method For Distributed Multi-Plants Based On Fusion Decision Tree,
2019
Engineering Research Center of Internet of Things Technology Applications Ministry of Education, Jiangnan University, Wuxi 214122, China;
Synergic Production Scheduling Method For Distributed Multi-Plants Based On Fusion Decision Tree, Wang Yan, Tianlun Jiang
Journal of System Simulation
Abstract: In the synergic production scheduling optimization problem of distributed multi-plants, it is necessary to consider the two stages of job allocation between factories and job scheduling in factories at the same time. This paper first establishes a distributed multi-plant scheduling model with total cost and advance/delay as the optimization objectives, and then proposes a nested optimization algorithm framework integrating ID3 decision tree with Gauss particle swarm optimization. In this framework, independent scheduling optimization within the factory is nested in the process of inter factory allocation optimization, and elite retention strategy is introduced to improve the algorithm optimization. In …
Overview Of Cooperative Target Assignment,
2019
1. Graduate College, National Defense University, Beijing 100091, China; ;2. College of Joint Operations, National Defense University, Beijing 100091, China;
Overview Of Cooperative Target Assignment, Ou Qiao, Xiaoyuan He, Jiuyang Tao
Journal of System Simulation
Abstract: The concept and connotation of combat coordination are briefly analyzed. The historical origin of cooperative target allocation and its orientation in command and control process are expounded. The research status of collaborative target allocation in model building and algorithm solving is analyzed comprehensively, the shortcomings of current research is pointed out. It is proposed that for the next step we should pay more attention to large-scale collaborative target allocation under dynamic and confrontational conditions, and focus on the real-time, adaptability and iterative evolution mechanism of the algorithm.
A Mesh Model Simplification Method Based On Visual Feature Preservation,
2019
1. Army Aviation Institute, Beijing 100123, China; ;2. Marine College, Northwestern Polytechnical University, Xi'an 710072, China;
A Mesh Model Simplification Method Based On Visual Feature Preservation, Che Li, Dejun Tang, Shimin Li, Fengju Kang
Journal of System Simulation
Abstract: Aiming at the problems of mesh visual feature loss and oversimplification in mesh simplification algorithm, a visual feature preservation based triangle mesh model simplification algorithm is proposed. The multi-viewpoint perception method is used to measure the visual perception error caused by the difference between the original and the simplified model in the two-dimensional view under the optimal viewpoint set. Based on QEM algorithm, a novel geometric error metric is built by introducing the triangle shape factor. The triangle collapse error function is defined by combining visual perception and geometric error to control the simplified depth of the model. Through …
Research On Clock Synchronization Of Simulation System Based On Ethernet And Optical Fiber Network,
2019
Shanghai Institute of Mechanical and Electrical Engineering, Shanghai 201109, China;
Research On Clock Synchronization Of Simulation System Based On Ethernet And Optical Fiber Network, Yulin Meng, Shen Tao, Shuaihao Wang, Lüyi Zhao, Chengshi Tang
Journal of System Simulation
Abstract: With the development of simulation communication and Ethernet clock synchronization technology, the traditional timing simulation method based on real-time operating system can not meet the accuracy requirements of clock synchronization between multi-simulation systems. A time synchronization method between simulation systems based on IEEE1588 clock synchronization protocol and optical fiber reflection memory network is proposed, in which the Beidou/GPS timing device periodically calibrates the real-time operating system, and the real-time operating system divides the frequency of the calibrated clock information and synchronizes the clock of each simulation system through the high-speed optical fiber reflection memory network. The clock synchronization …
Research On Control Technology Of Aeroengine Heat Exchanger,
2019
1. School of Energy and Power Engineering, Beihang University, Beijing 100191, China; ;2. Collaborative Innovation Center for Advanced Aero-Engine, Beihang University, Beijing 100191, China; ;
Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua
Journal of System Simulation
Abstract: In order to solve the high temperature problem caused by the high speed of the synergistic aspirating engine, this paper designs a control algorithm for the heat exchanger. In the process of designing the control algorithm, considering the strong nonlinearity, uncertainty and strong coupling of the engine, The decoupling study of the multi-input and multi-output linear model of the heat exchanger is carried out. The decoupling effect of two different decoupling methods on the strongly coupled heat exchanger is obtained. The fuzzy decoupling PID controller has short adjustment time and overshoot. Small, conclusions with better decoupling effects.
Downhole Drilling Processing Data Acquisition And Stick Slip Characteristic Analysis,
2019
1. School of Information and Communication Engineering, Beijing Information Science and Technology University, Beijing 100101, China; ;
Downhole Drilling Processing Data Acquisition And Stick Slip Characteristic Analysis, Huang Sheng, Zhang Tao, Chongjun Huang, Yumei Li, Deng Hu, Zhang Xia
Journal of System Simulation
Abstract: During oil drilling process, drill string vibrations are detrimental to the bit and drill string, which even causes failure of equipment. Researches show that, studying the law of near bit vibration data can reduce non-production time (NPT) and improve drilling efficiency. This paper uses power spectral density and wavelet transform to analyze vibration signals, then compares with normal drilling situation to find out stick slip characteristics. The results show that, when stick slip occurs, the mean value of lateral vibration fluctuates greatly, which indicates stick slip is mainly based on torsional vibration. From the perspective of power spectral density …
Research On Mechanical Configuration Of Automatic Container Terminals Based On Simulation Optimization Method,
2019
1. Dalian Neusoft University of Information, Dalian 116023, China; ;
Research On Mechanical Configuration Of Automatic Container Terminals Based On Simulation Optimization Method, Shaozheng Yu, Dongshi Sun, Chen Jing, Yongchao Li
Journal of System Simulation
Abstract: In the study of mechanical configuration problem of automated container terminal, a system simulation model based on discrete event simulation is constructed. The key parameters and interference factors that affect the performance of the system are fully considered in the model and a mechanical scheduling algorithm interface to ensure the effectiveness of the simulation model is designed. On the premise of ensuring the reliability of the container terminal system, a cycle optimization method of mechanical configuration scheme is proposed to minimize the cost. An example is given to solve the mechanical configuration scheme of an automatic container terminal. …
Research On The Simulation Technology For Multi-Aerocraft Cooperative Guidance,
2019
1. Science and Technology on Complex System Control and Intelligent Agent Cooperation Laboratory, Beijing 100074, China; ;2. Beijing Electromechanical Engineering Institute, Beijing 100074, China;
Research On The Simulation Technology For Multi-Aerocraft Cooperative Guidance, Li Jing, Han Jian, Zhang Qing
Journal of System Simulation
Abstract: The formal system of multi- aerocraft cooperative simulation system is identified as the discrete event system & different equation system specifications (DEV&DESS) through the analysis of the composition and running mechanism. The running control problem of cooperative simulation system is transformed into simulation control problem of a specific DEV&DESS system. A dynamic operation control method for cooperative guidance simulation system based on coordinator is proposed, and this method is validated by real-time mathematical simulation experiments.
An Lstm-Based Motion Recognition Method For Power Operation And Maintenance,
2019
1.School of Information Engineering, Zhengzhou University, Zhengzhou 450001, China; ;
An Lstm-Based Motion Recognition Method For Power Operation And Maintenance, Peizhen Liu, Yuxiang Jia, Shihong Xia
Journal of System Simulation
Abstract: The security of power operation and maintenance has always been a subject of great social concern. In order to avoid serious consequences caused by the fault of staffs, a motion recognition method for power operation and maintenance jobs based on LSTM (Long Short-Term Memory) is proposed, which covers the whole process from data collection, data processing to motion classification and recognition, then it can recognise and supervise the behavior of staffs who are at work. In addition, a simulation experiment is conducted between the deep learning algorithm LSTM and the traditional machine learning algorithm KNN based on the newly …
Design Of Feedback Linearization Nonlinear Controller For Asynchronous Motor Power Consumption Efficiency,
2019
School of automation, Beijing Information Science and Technology University, Beijing 100192, China;
Design Of Feedback Linearization Nonlinear Controller For Asynchronous Motor Power Consumption Efficiency, Li Rui, Yingnian Wu
Journal of System Simulation
Abstract: In order to realize precise feedback linearization and optimal control of motor power consumption for MIMO nonlinear affine system, we build the model of induction motor within which dynamic power loss factor is included. Based on the differential geometry theory, a nonlinear optimization model of the controller is designed for this model to control the asynchronous motor outputs accurately and enhance the power efficiency. This paper presents an optimal control law for multiple inputs multiple outputs affine nonlinear system and the detailed design steps are given combined with examples for multiple outputs tracking problem. The simulation results show that …
Research On Intelligent Clustering Algorithm For Complex Water Wireless Network Surveillance,
2019
1. College of Electronic Information Engineering, Xi‘an Technological University, Xi‘an 710021, China; ;3. Northwest Institutes of Advanced Technology, Xi‘an Technological University, Xi‘an 710021, China;
Research On Intelligent Clustering Algorithm For Complex Water Wireless Network Surveillance, Hua Xiang, Hongtao Liang, Zhaoxin Dong, Wang Zhao, Hongjuan Yao, Baohua Li, Bingqing Jiang
Journal of System Simulation
Abstract: The clustering of irregular networks will cause load imbalance, which results in the phenomenon of “energy hot zone”. Aiming at the unreasonable topology of irregular network clustering, an intelligent clustering algorithm based on genetic strategy is proposed for the wireless network surveillance of complex water system. An irregular complex water topology model and an energy consumption model are built, and a genetic clustering strategy is designed via the principle of minimum energy consumption. The P matrix coding method is given, which avoids the squared increment of data calculation. Simultaneously, an adaptive genetic operator and a fuzzy modified operator are …
Moving Object Detection Based On Deep Convolutional Neural Network,
2019
School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200444, China;
Moving Object Detection Based On Deep Convolutional Neural Network, Yuqiu Lu, Jinyu Sun, Shiwei Ma
Journal of System Simulation
Abstract: A deep convolution neural network MONet is designed for the intermittent motion problem in moving objects detection. In the absence of training data sets, a synthetic dataset GoChairs is generated by affine transformation, and on this basis the network training and testing are performed. The results show that the trained MONet can effectively detect the moving objects based on the correspondence between the pixels. The traditional datasets CDnet and I2R are also tested to verify the generalization performance of the network. In addition, MONet is compared qualitatively and quantitatively with classical methods for the intermittent motion problem of …
3d Shape Deformation Simulation Algorithm Based On Haptics,
2019
1. School of Information Management, Nanjing University, Nanjing 210023, China; ;
3d Shape Deformation Simulation Algorithm Based On Haptics, Binbin Qi, Xuefang Zhu, Lipeng Fan
Journal of System Simulation
Abstract: Shape deformation is widely used in virtual reality, system simulation, computer animation and other graphics applications. Few people pay attention to introducing haptic interaction into 3D model deformation. We provide a haptic interactive framework by introducing haptic interaction into shape editing field. Based on the above haptic interactive framework, we propose a 3D model deformation simulation algorithm based on haptics. In order to realize the shape deformation, this algorithm needs to involve three parts: grid hierarchical structure, local mass-spring model and the dynamic shape deformation. Experimental results show that this algorithm has good stability and strong robustness, and the …
Intelligent Manufacturing Plan Management Based On Digital Twins,
2019
1. Beijing Complex Product Advanced Manufacturing Engineering Research Center, Beijing Simulation Center, Beijing 100854, China; ;2. State Key Laboratory of Intelligent Manufacturing System Technology, Beijing Institute of Electronic System Engineering, Beijing 100854, China; ;3. Science and Technology on Space System Simulation Laboratory, Beijing Simulation Center, Beijing 100854, China;
Intelligent Manufacturing Plan Management Based On Digital Twins, Yingying Xiao, Wang Mei, Liqin Guo, Xing Chi, Changhui Zhuang
Journal of System Simulation
Abstract: For the multi-variety and small-batch manufacturing mode, the planning management system cannot be timely automatically adjusted according to uncertain factors. This paper proposes an intelligent manufacturing plan management system based on factory digital twins. The plan management PDCA business process model is established. In addition, the processing logic model and constraints of the periodic static scheduling model and the dynamic emergency scheduling model are proposed. Based on the planning management case of hybrid assembly of two types of aerospace complex products, it is verified that the management model proposed in this paper can support the intelligent dynamic adjustment of …
A Cloud Service Composition Optimization Based On Hnn,
2019
1. Linfen Vocational and Technical College, Linfen 041000, China; ;2. School of Educational Science, Shanxi Normal University, Linfen 041000, China;
A Cloud Service Composition Optimization Based On Hnn, Huili Zhang, Zhihe Li
Journal of System Simulation
Abstract: With the rapid development of Cloud service application, how to effectively optimize the composition of Cloud services on cloud platform and improve the overall performance of cloud platform system have become an urgent research issue. In order to improve the efficiency of Cloud services, a combined optimization model based on Hopfield neural network is proposed. The problem of Cloud services is modeled. The problem is expressed as Hopfield Neural Network energy model for optimization, and a PSO group algorithm with Cauchy disturbance is designed to improve the Hopfield model. The experimental comparison shows that the method can improve …
Modeling And Simulation Of Complex Equipment Health Management System Based On Cloud Computing,
2019
1. School of Mechanical Engineering, Shenyang University, Shenyang 110044, China; ;2. School of Mechanical and Automation, Northeastern University, Shenyang 110819, China;
Modeling And Simulation Of Complex Equipment Health Management System Based On Cloud Computing, Tianrui Zhang, Chuansheng Qu, Baoku Wu, Jianan Xu
Journal of System Simulation
Abstract: For complex equipment operation safely, the health management problems of complex equipment life cycle is analyzed. In order to realize remote service, complex equipment health management mode based on cloud computing is proposed. Aiming at the accuracy problem in the process of extracting and recognizing complex equipment characteristic data, the feature knowledge acquisition method based on ontology is researched, and the expression and acquisition algorithm of state characteristic knowledge is proposed. A task sequencing algorithm faults based on fuzzy comprehensive evaluation method is proposed, an appropriate task assignment model is selected for scheduling health management technicians. …
Agent Based Modeling And Simulation Analysis Of Low-Orbit Early-Warning Satellites,
2019
China Academy of Launch Vehicle Technology Research and Development Department, Beijing 100076, China;
Agent Based Modeling And Simulation Analysis Of Low-Orbit Early-Warning Satellites, Liu Wen, Xiaolu Wang, Hongsheng Wang, Zhang Heng, Changqing Wang
Journal of System Simulation
Abstract: Low-Orbit Early-Warning Satellite has accurate midcourse ballistic missile tracking and surveillance capability. The paper takes Space Tracking and Surveillance System’s function and construction as the research subject. System model is constructed based on Agent method. The possible constellation configurations of STSS are analyzed considering the coverage performance,and the detection capability of ballistic missile target is simulated and analyzed. Simulation analysis of target detection is carried out. The result shows that STSS can effectively detect a certain number of targets, but detecting capability is affected severely by solar illumination.
Simulation Of Vehicle Startup Delay At Green Light And Its Direct And Chain-Reaction Impact On Traffic Flow,
2019
School of Civil Engineering, Tsinghua University, Beijing 100084, China;
Simulation Of Vehicle Startup Delay At Green Light And Its Direct And Chain-Reaction Impact On Traffic Flow, Longxi Luo, Lijun Xie, Jianping Wu, Xu Ming
Journal of System Simulation
Abstract: In current traffic simulations, it is implicitly assumed vehicles are driven by ideal drivers. Therefore, simulated vehicles make the most reasonable decisions such as moving out immediately when traffic lights turn green, resulting in a gap between simulations and real traffics. Research shows that drivers, including those who follow the rules, show a delay in starting-up their vehicles at the green light. The vehicle startup delay (SUD) is even more significant for drivers by things such as cell phones during waiting. However, the SUD has rarely been considered in simulations. The SUD is simulated to study its impacts on …
Fault Prediction Of Satellite Attitude Control System Based On Neural Network,
2019
1. School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China; ;
Fault Prediction Of Satellite Attitude Control System Based On Neural Network, Xiaofan Meng, Song Hua
Journal of System Simulation
Abstract: A new method based on BP neural network(BPNN), wavelet neural network(WNN) and wavelet decomposition-LSTM(wLSTM) network is proposed for predicting faults in the satellite attitude control system. Normal satellite attitude data is used to train BPNN which is used as the standard model of satellite attitude control system. The real-time attitude residuals is obtained by subtracting the BPNN output attitude angle from the real-time data of satellite attitude. The time series of the residuals are used to build WNN and wLSTM models to predict the faults of satellite attitude control system. A conclusion is given according to comparing the …
Design Of Combat Simulation And Visualization System Of Hypersonic Vehicle,
2019
Science and Technology on Space Physics Laboratory, Beijing 100076, China;
Design Of Combat Simulation And Visualization System Of Hypersonic Vehicle, Yu Ying, Weidong Liang, Xiujuan Zhu, Jianlin Wang, Wang Ling
Journal of System Simulation
Abstract: Based on the thought of combat simulation, the system of combat simulation and visualization is designed to show the typical combat mode and the characteristics of near space vehicles. Taking the aircraft attacking a fixed target as an example, the formulation of combat plan, the deployment of forces and the design of combat process of both sides are realized. On the one hand, a combat simulation platform which covers various combat modes of attack and defense is established. On the other hand, the whole process of combat confrontation of hypersonic vehicles is presented, driven by the real-time simulation data. …
