Design And Implementation Of Real Confrontation Oriented Simulation Models For Artillery Firepower,
2020
1. College of Command Information Systems, PLA University of Science and Technology, Nanjing 210007, China;;2. PLA 65067 Force, Shenyang 110035, China;
Design And Implementation Of Real Confrontation Oriented Simulation Models For Artillery Firepower, Baoyu Xu, Hongjun Zhang, Guo Hong, Guangming Xu
Journal of System Simulation
Abstract: Aiming at the training requirement of real confrontation, a simulation method based on real equipment for artillery firepower was proposed on the basis of the analysis of artillery firepower attacking behavior characteristics. By comprehensive use of the sensor, exterior ballistic calculation, satellite positioning, geographic information and damage assessment technology, using a embedded simulation method, a simulation model of artillery firepower fused information collection of artillery firing data, ballistic endpoint simulation and damage assessment was built, which could reflect systematically and comprehensively artillery firepower attacking process and the result of the strike in the actual combat environment. The model …
Qos-Aware Scheduling For Data Intensive Workflow,
2020
College of Information Science and Engineering, Northeastern University, Shenyang 110004, China;
Qos-Aware Scheduling For Data Intensive Workflow, Wan Cong, Cuirong Wang, Wang Cong
Journal of System Simulation
Abstract: The development of technology enables people to access resources from different data centers. Resource management and scheduling of applications, such as workflow, that are deployed on the cloud computing environment have already become a hot spot. A QoS-aware scheduling algorithm for data intensive workflow on multiple data center environment was proposed. Scheduling data intensive workflow on multiple data center environment has two characteristics: A large amount of data is distributed in different geographical locations, the process of data migration will consume a large amount of time and bandwidth; secondly, the data centers have different price and resources. Data migration …
Analysis Of Rubber Conveyor Belt Sag Resistance Experiment Table Dynamics,
2020
College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China;
Analysis Of Rubber Conveyor Belt Sag Resistance Experiment Table Dynamics, Mao Jun, Wang Xin, Hongyue Chen
Journal of System Simulation
Abstract: To study the dynamic characteristics of rubber conveyor belt sag resistance bench working process, by hydraulic cylinder pressure, roll eccentricity error and st2000 conveyor belt thickness error as system incentive, a 3-DOF dynamics sag resistance test bench dynamic model was established. The model was solved by using Simulink. The results show that: as provided by the hydraulic cylinder pressure force of 10, 000 N, in the time domain, the vibration of the idler roller and pass roller slants big, which need to improve the connection stiffness. In the frequency domain, the excitation frequency and the natural frequency have larger …
Computational Investigation Into Thermal-Mechanical Coupling Characteristics Of Disc Brake Under Anti-Lock Braking Condition,
2020
School of Automotive Engineering, Tongji University, Shanghai 201804, China;
Computational Investigation Into Thermal-Mechanical Coupling Characteristics Of Disc Brake Under Anti-Lock Braking Condition, Lijun Zhang, He Zhen, Dejian Meng
Journal of System Simulation
Abstract: The braking condition has great influence on the thermal-mechanical coupling characteristics of disc brake. A three-degree-of-freedom dynamic model of braking vehicle was built. The braking force was determined by an anti-lock braking system (ABS) which adopted the threshold-logical control strategy of wheel slip rate. With the model, anti-lock braking processes on dry and wet were simulated. In the meantime, for the sake of comparison, non-anti-lock braking processes were simulated on corresponding road. A thermal-mechanical coupling finite element model of a ventilated disc brake was established. Thermal-mechanical coupling characteristics of brake disc and brake lining were calculated under different braking …
Study On Aircraft Scheduling Optimization Based On Improved Genetic Algorithm,
2020
Aeronautic Engineering College, Civil Aviation University of China, Tianjin 300300, China;
Study On Aircraft Scheduling Optimization Based On Improved Genetic Algorithm, Yaohua Li, Wang Lei
Journal of System Simulation
Abstract: Aircraft scheduling was studied, and an optimization model of aircraft assignment based on the objective function of maximize total profit was suggested. It considered its cost and benefits by combining fleet and aircraft. In the view of the feature of this model, the innovation of genetic algorithm chromosome was carried on, and these chromosomes formatted chromosome groups. The groups interior could cross over and mutate, and the probability of crossover and mutation could dynamically adjust in accordance with adaptive values to accelerate the convergence speed, the model was resolved fast in this way. In the process of simulation with …
Control Allocation Method For Split-Drag-Rudders With Asymmetrical Deflection,
2020
School of Automation, Northwestern Polytechnical University, Xi'an 710072, China;
Control Allocation Method For Split-Drag-Rudders With Asymmetrical Deflection, Xiaobo Qu, Weiguo Zhang, Jingping Shi
Journal of System Simulation
Abstract: The split drag rudders (SDRs) were usually used for the yaw control of tailless flying wing aircraft with the symmetric deflection mode. This approach was simple and effective, but the upper and lower deflectors of the SDRs were constrained to deflect symmetrically, limiting the distribution and control mode of the deflectors, reducing the maximum available moment in pitch axis and roll axis, affecting the handling performance of the aircraft flying at low speed. A certain flying wing UAV was used as the study model. The CFD method was adopt to investigate the aerodynamic characteristic of SDRs operating in either …
Mixed H2/H∞ Optimal Pid Control For Superheated Steam Temperature System,
2020
Department of Automation, North China Electric Power University, Baoding 071003, China;
Mixed H2/H∞ Optimal Pid Control For Superheated Steam Temperature System, Weiping Liang, Jiarong Wang
Journal of System Simulation
Abstract: Aiming at the non-linear, large inertial, uncertain parameters and multi-disturbances of the main steam temperature object in power plants, a mixed H2/H∞ optimal PID control scheme was designed. The multiplicative perturbed boundary of the H∞ and the effective range of the PID controller parameters were given under the system being closed-loop stability. An improved gravitational search algorithm was proposed in order to obtain optimum performance indicators. The effectiveness of the algorithm was supported through testing on typical test functions, then the algorithm was applied to optimize the parameters of the main steam temperature system Mixed …
Modeling Method Based On Reachable Set For Safety Path In Autonomous Vehicle Obstacle Avoidance,
2020
1. School of Traffic & Vehicle Engineering, Shandong University of Technology, Zibo 255000, China;;2. School of Computer and Electronic Information Engineering, Shandong Yingcai University, Jinan 250104, China;
Modeling Method Based On Reachable Set For Safety Path In Autonomous Vehicle Obstacle Avoidance, Cao Kai, Xiaoxiao Huang, Yu Yun, Liu Chun
Journal of System Simulation
Abstract: In view of problem in all possible uncertain behavior of vehicle unable existed by the traditional path planning algorithm, a modeling method was proposed which deemed a moving vehicle as a hybrid system switching dynamically between continuous and discrete mode, modeled an optimal trajectory for vehicle obstacle avoidance by using a single security target location, and built a safe state reachable set based on the trajectory beam of multiple security target locations. On this basis, the condition of the inevitable collision of vehicle was analyzed, and the optimal control problem with loose constraints for the vehicle obstacle avoidance was …
Orthogonal Experimental Optimization Design For Improving Aerodynamic Characteristics Of Hovering Air Vehicle,
2020
School of Information Technology and Engineering, Tianjin University of Technology and Education, Tianjin 300222, China;
Orthogonal Experimental Optimization Design For Improving Aerodynamic Characteristics Of Hovering Air Vehicle, Yanan Yu
Journal of System Simulation
Abstract: Vertical hovering MAV model with flexible aerodynamic shape was proposed. The passive adaptive deformation that produced on the aerodynamic shape was designed to absorb disturbance from outside airflow pressure, and furthermore to improve aircraft's disturbance resistance ability. Multiple factors' effects for aircraft's aerodynamic characteristics were analyzed, such as structural geometrical parameters, candidate material properties, and environmental parameters. The orthogonal experimental analysis of aircraft aerodynamic forces was accomplished, which include the forces produced in the horizontal and vertical direction. The significant factors effecting on the flight performance were discussed and the best response value in the selected parameter range was …
Spring Unit Equivalent Model Of Steam Turbo-Generator Radial Fixture,
2020
School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;
Spring Unit Equivalent Model Of Steam Turbo-Generator Radial Fixture, Shouqun Sun, Huifang Wei, Haihui Xu
Journal of System Simulation
Abstract: The fixed structure of turbo-generator stator end was studied. Bottom-up modelling method was applied to establish the finite element model. The method calculating the combined stiffness of the connection structure and effective contact area was proposed, which used conical symmetric mid plane. Combined with spring-damper unit, insulated screw was analysed by finite element simulation. The stator winding end as a whole system was for modal analysis. Corresponding natural frequency and vibration model were acquired. Hammering test method and modal testing system were applied to calculate the steam turbine end natural frequency. Compared with the experimental result, the text given …
Dynamic Stochastic Relay Selection Algorithm In Peer-To-Peer Networks,
2020
Department of Electronics and Information Engineering, HuaZhong University of Science and Technology, Wuhan 430074, China;
Dynamic Stochastic Relay Selection Algorithm In Peer-To-Peer Networks, Chengwei Zhang, Wenqing Cheng, Hei Xiaojun
Journal of System Simulation
Abstract: A stochastic routing algorithm for selecting appropriate relay nodes in peer-to-peer networks was proposed. This algorithm was constructed using a stochastic programming framework by leveraging the actual delay of local links and the statistical delay distributions of non-local overlay links. In order to approximate the statistical delay distribution of non-local overlay links, the historical delay values of each link were utilized to approximate the link delay distribution. This algorithm was fully distributed and the stochastic link measurement data could be updated between neighboring nodes at a longer time granularity to reduce routing overhead. This algorithm and …
Bifurcation Multi-Path Grooming Algorithm In Multi-Granularity Transport Network,
2020
1. School of Computer Science and Engineering, Northeastern University, Shenyang 110819, China;;
Bifurcation Multi-Path Grooming Algorithm In Multi-Granularity Transport Network, Guangwei Lei, Xingwei Wang, Huang Min, Zhao Yue
Journal of System Simulation
Abstract: Recent years, with the rapid development and wide use of multi-granularity transport network, the pressure of backbone transmission network has been alleviated to some extent. However, the growing user demands to the Internet make network power consumption and bandwidth still face severe challenge. To deal with it, a bifurcation multi-path grooming algorithm was proposed and its associated bandwidth allocation strategy was devised to reduce power consumption and blocking rate. The proposed algorithm has been implemented by simulation and the evaluation results show that its performance is better than that of the benchmark.
Research On Modeling Of Pump Model Based On Rbf Neural Network,
2020
College of Engineering, Bohai University, Jinzhou 121013, China;
Research On Modeling Of Pump Model Based On Rbf Neural Network, Qinghui Wu, Qinghuan Shen, Xinjun Wang
Journal of System Simulation
Abstract: On the basis of research on pump characteristics and pump model, a modeling method based on RBF neural network with K-means clustering algorithm was proposed. With k-means clustering algorithm the center vector and base width parameters, in which lie in the hidden layer, were optimized by input data sample. The weights between the hidden layer and the output layer were optimized by input-output data sample with least squares method. The neural network models of the pump characteristic and pump comprehensive model were separately trained and checked using the detected data. Its results suggest that reasonably choosing the number of …
Recent Advances In Finite Element Simulation Of Machining Processes,
2020
Harbin University of Science and Technology, Harbin 150080, China;
Recent Advances In Finite Element Simulation Of Machining Processes, Caixu Yu, Chunbin Cai, Huang Cui, Erliang Liu
Journal of System Simulation
Abstract: Recently, the finite element simulation technology has been widely applied in machining simulation and has played an irreplaceable role in the investigations of machining mechanism of metal and composite materials, optimization of cutting parameters,etc. The importance of finite element simulation, commonly used software and material constitutive model were introduced. The latest research progress of the finite element simulation of cutting at home and abroad was summarized, including the simulation of chip morphology, the simulation of cutting force and cutting temperature, tool wear simulation, the machined surface integrity, simulation of the effect of multi-steps cutting on cutting process and finite …
Simulation-Based An Exploratory Analysis Of Drone Air Strike On Saudi Oilfields,
2020
Shanghai Electro-Mechanical Engineering Institute, Shanghai 201109, China;
Simulation-Based An Exploratory Analysis Of Drone Air Strike On Saudi Oilfields, Jiajun Zhang, Xiaochao Qian, Jinpeng Zhou, Xuanling Wang, Zhifeng Lu
Journal of System Simulation
Abstract: The incident of air strike in Sandi Arabia in September 2019 is taken as an example,A rapid analysis method for crisis events based on simulation is proposed. Combining the simulation with the exploratory analysis, the uncertainty of crisis events is comprehensively analyzed and dealt with. According to the public information of the incidents details from Sandi Arabia, Yemen, the combat situation of the air strike is replayed based on the wargaming. The rationality and authenticity of the details in the event statement is verified and can also provide reference to the development and combat research of the “Low, Small …
Multi-Tank Adaptive Scheduling Algorithm And Simulation For Ship Stability Realization,
2020
Wuhan University of Technology, Wuhan 430063, China;
Multi-Tank Adaptive Scheduling Algorithm And Simulation For Ship Stability Realization, Xiong Yong, Xuanzhuo Liang, Zhang Jia
Journal of System Simulation
Abstract: Aiming at the influence of the oil tank on the floating state and stability of the ship, the multi-tank adaptive dispatching control algorithm to maintain the stability of the ship is studied. The automatic floating state adjustment simulation system of the ship is realized by the WinCC (Windows Control Center) configuration software. For the system architecture, the Boolean logic table is used to construct the connection relationships of the oil tanks, pumps and pipelines, and the amount of oil exchange between the cabins is calculated according to the floating equation, and the balance of the floating state in the …
Simulation-Based Effectiveness Evaluation For System-Of-System Under Multi-Equipment Collaboration,
2020
1. Anshan Branch, Liaoning Police College, Anshan 114051, China;;
Simulation-Based Effectiveness Evaluation For System-Of-System Under Multi-Equipment Collaboration, Ma Ning, Shenglin Lin
Journal of System Simulation
Abstract: Complex coordination exists among the various equipment in the system-of-system (SoS) operational process. The influence relationship among the various indexes is ignored in the traditional effectiveness evaluation methods. Aiming at this, a new effectiveness evaluation approach for the SoS is proposed. Numerous evaluation data is analyzed, based on the association rules mining, to obtain the influence among the effectiveness indexes. The networked evaluation index system is constructed, and the effectiveness integration evaluation is realized based on the analytic network process. The feasibility and validity of the proposed method are verified by evaluating the effectiveness of an air defense SoS.
Identification Method For Fractional-Order Systems Based On Haar Wavelet Operational Matrix,
2020
1. School of Automation, Nanjing University of Information Science & Technology, Nanjing 210044, China;;2. Jiangsu Collaborative Innovation Center on Atmospheric Environment and Equipment Technology, Nanjing University of Information Science & Technology, Nanjing 210044, China;
Identification Method For Fractional-Order Systems Based On Haar Wavelet Operational Matrix, Yuanlu Li, Li Teng, Baoying Liu
Journal of System Simulation
Abstract: Studies have shown that the dynamical systems can be more accurately described by the fractional-order systems because its order can be any number. That’s why the fractional-order systems are being paid more and more attention. However, how to create a fractional-order system is still in the exploratory stage. Considering the nonlocal features of the fractional differentiation, a method for the fractional-order system identification is proposed by taking the Haar wavelet operational matrix. The proposed method can reduce the dimension of the operational matrix by abandoning the high frequency coefficients of the input and output signals so that the buffer …
Classification Of Chest X-Ray Disease Based On Convolutional Neural Network,
2020
Department of Computer Science and Technology, College of Electronics and Information Engineering, Tongji University, Shanghai 201804, China;
Classification Of Chest X-Ray Disease Based On Convolutional Neural Network, Huang Xin, Fang Yu, Mengdan Gu
Journal of System Simulation
Abstract: The artificial intelligence technology can effectively assist the chest X-ray diagnosis. On the basis of the analysis of Chinese reports of chest X-rays, a labeling method of the thoracic disease classification for the chest abnormal parts is proposed and a dataset of the thoracic disease classification labels is complied. The thoracic disease classification is evaluated through four kinds of convolutional neural networks, AlexNet, VGGNet, ResNet and DenseNet and through three kinds of training methods, direct training, ImageNet pre-training and Chest X-14 pre-training. The result shows that the more complicated convolutional neural network with the more parameters, the better performance …
Study Of Parallelized Graph Clustering Algorithm Based On Spark,
2020
1. Computer Network Information Center, Chinese Academy of Sciences, Beijing 100190, China;;2. University of Chinese Academy of Sciences, Beijing 100190, China;
Study Of Parallelized Graph Clustering Algorithm Based On Spark, Dongjiang Liu, Jianhui Li
Journal of System Simulation
Abstract: The parallelized graph clustering algorithm is researched. A new parallelized graph clustering algorithm is proposed based on Spark. As the top operation of Spark occupies a lot of memory space, a new algorithm which is used to substitute the top operation is proposed to reduce the memory consumption. By improving bottom up hierarchical clustering algorithm, the speed of the proposed algorithm is improved. A new data filtering method based on the feature of graph data is proposed. By the method, the running time and memory space comsuption is reduced greatly. The reason of the high efficiency of this filtering …
