Numerical Simulation For Influence Of Baffle Length On Hydraulic Characteristics In Radial Sedimentation Tanks,
2020
State Key Laboratory of Eco-Hydraulic Engineering in Shaanxi, Xi'an University of Technology, Xi'an 710048, China;
Numerical Simulation For Influence Of Baffle Length On Hydraulic Characteristics In Radial Sedimentation Tanks, Wenli Wei, Zewei Zhang, Yunfei Hong, Yuling Liu
Journal of System Simulation
Abstract: The VOF (volume of fluid) method was applied to track the free water surface, and the RNG turbulent model was used to close the two-phase flow time-averaged equations. The influence of inlet vertical baffle with different lengths on hydraulic characteristics in radial sedimentation tank was simulated and analyzed. The control equations were discretized using the finite volume method. Velocity and pressure were solved using the PISO (Pressure-Implicit with Splitting of Operators) algorithm. The research results show that: the long length feed flow baffle model has a smaller recirculation zone, better velocity field distribution than short length baffle, and the …
Research Of Visualization Of Road Guide Sign Panel Based On Combination Of Guiding Information,
2020
1. Guangdong Provincial Key Laboratory of Intelligent Transportation System, Guangzhou 510006, China;;2. School of Engineering, Sun Yat-sen University, Guangzhou 510006, China;;
Research Of Visualization Of Road Guide Sign Panel Based On Combination Of Guiding Information, Zhongming Niu, Huang Min, Yuan Yuan, Li Min
Journal of System Simulation
Abstract: In order to realize the intelligent management of road guide signs, a method of visualization of road guide sign panel based on the flexible combination of guiding information was proposed. As a consequence of analysis for structures of guide sign panel, the message on the guide sign panel was decomposed into guiding information, and then visualization function was proposed. The panel style was determined by the physical and logical topology of guiding intersection dynamically with the help of guide sign system database. Then the composition of geography information and guiding information was utilized in the process of visualization …
Fault Modeling And Simulation Of Swing Infrared Earth Sensor,
2020
1. Beijing Institute of Control Engineering, Beijing 100190, China;;2. Science and Technology on Space Intelligent Control Laboratory, Beijing 100190, China;
Fault Modeling And Simulation Of Swing Infrared Earth Sensor, Jiansong Chang, Xinyan Liu
Journal of System Simulation
Abstract: In order to meet the requirements of refined modeling and fault simulation, function modules of swing infrared earth sensor (IRES) was identified according to its working principle, main fault modes of each module was analyzed, mathematical fault model based on physical mechanism was designed, and a program for normal and fault simulation was written. The refined fault model can calculate attitude angles exactly, reflect signal relationship between inside modules, and simulate various fault modes effectively. The model can be used in simulating, testing and fault diagnosis and so on.
Research On Effect Of Harmonic Source Equivalent Model On Harmonic Power Flow,
2020
Fuzhou University, Fuzhou 350116, China;
Research On Effect Of Harmonic Source Equivalent Model On Harmonic Power Flow, Zhenguo Shao, Wenbo Su, Zhaoxiang Li
Journal of System Simulation
Abstract: The models and parameters of harmonic source are the main factors that affect the calculation accuracy of harmonic flow. Harmonic source was divided into linear load and non-linear load and then modelled separately. The algorithm flowcharts, coupling method, decouple method and linear method, were analyzed with power source model, current source model and current source-impedance model correspondingly. The frequency response of those models was compared with a simple example. It indicates that the model of linear load and its affect in harmonic frequency are the key factors influencing computational accuracy of harmonic power flow. Then an example of harmonic …
Research On New Evaluation Method Based On Extreme Learning Machine,
2020
1. Luoyang Electronic Equipment Test Center of China, Luoyang 471003, China;;
Research On New Evaluation Method Based On Extreme Learning Machine, Jianling Cui, Tian Wen, Huanyao Dai, Zhou Bo, Huidong Qiao
Journal of System Simulation
Abstract: It's always the hot and difficult study point in electronic information equipment test areas of how to evaluate the combat effectiveness of electronic information equipment, the credibility of test environment, the fidelity of combat target simulation in timely and effectively. To solve these problems, the theory of extreme learning machine was analyzed, and the evaluation method based on extreme learning machine was proposed, and the using process of the evaluation method was demonstrated by taking evaluating the operational effectiveness of anti-aircraft gun-missile system as example. Therefore, the conclusion can provide a theoretical reference for the evaluation of combat effectiveness, …
Research Of 3d Cloud Illumination Model Based On Importance Sampling,
2020
1. School of Computer and Software, Nanjing University of Information science and Technology, Nanjing 210044, China;;2. Jiangsu Engineering Center of Network Monitoring, Nanjing University of Information and Technology, Nanjing 210044, China;
Research Of 3d Cloud Illumination Model Based On Importance Sampling, Yonghua Xie, Fuxing Yuan, Wang Chang
Journal of System Simulation
Abstract: Currently existing 3D cloud simulation illumination models were confronted with the shortcomings such as complexity of implementation and low rendering efficiency. Herein a calculation method for illumination model based on importance sampling was proposed; Aiming at the problems of the old phase function, a new phase function was proposed to improve the rendering efficiency and quality. By the design of the importance function, the method did importance sampling in integrated interval and combined two phase functions to render the cloud. The results of the simulation show that the presented method has enhanced the rendering speed with the guarantee of …
Research On Sparse Grid Non-Uniformity Correction Technologies For Infrared Imaging Resistor Array,
2020
Science and Technology on Space System Simulation Laboratory, Beijing Simulation Center, Beijing 100854, China;
Research On Sparse Grid Non-Uniformity Correction Technologies For Infrared Imaging Resistor Array, Huijie Du, Hongming Zhao, Yu Hong, Gao Yang, Zhang Yi
Journal of System Simulation
Abstract: The non-uniformity characteristic is the crucial factors affecting the image quality projected by infrared imaging resistor array, and which affects the fidelity of the infrared scene simulation. The non-uniformity characters of the infrared imaging simulation resistor array were analyzed based on measured data; the sparse grid and the flood non-uniformity correction technologies were investigated and analyzed and based on the existing measuring technology the improved sparse grid method for engineering was proposed. Through measuring the non-uniformity data, establishing the linear look-up table and correcting the non-uniformity image, the non-uniformity correction algorithm was developed and validated. The result shows …
Evaluation Of Anti-Multipath Performance To Satellite Navigation Signal Tracking On L1/E1/B1 Frequency Band,
2020
School of Information and Navigation, Air Force engineering University, Xi'an 710077, China;
Evaluation Of Anti-Multipath Performance To Satellite Navigation Signal Tracking On L1/E1/B1 Frequency Band, Mao Hu, Dewei Wu
Journal of System Simulation
Abstract: Aiming at analysis requirement to anti-multipath performance of satellite navigation signal system, on the basis of expounding modulation types of latest navigation signal system on L1/E1/B1(1575.42MHz) frequency band, the analytical expressions of code tracking multipath error envelope and carrier phase multipath error based non-coherent early minus late process discriminator and arctangent discriminator was deduced respectively, the effect of receiver correlation distance, receiver front-end bandwidth and navigation signal modulation types to multipath error were analyzed through simulation. The results show that B1-C open service signal of BDS should adopt MBOC(6,1,1/11) modulation of similarly Galileo E1OS combination mode, and B1 …
Optimization Simulation For Job-Shop Scheduling For Reducing Manufacturing Energy Consumption,
2020
1. College of Information, Huazhong Agricultural University, Wuhan 430070, China;;
Optimization Simulation For Job-Shop Scheduling For Reducing Manufacturing Energy Consumption, Xiaoxia Li, Xiaomao Huang, Jianxiao Liu, Liu Feng
Journal of System Simulation
Abstract: To reduce the energy consumption in the manufacturing process by optimizing job-shop scheduling, the process of the machines' energy consumption was divided into different stages. The energy consumption of each stage was analyzed and modeled. The job-shop scheduling problem model for manufacturing energy consumption was developed. On the basis of the developed problem model, minimizing manufacturing energy consumption was used as the optimization goal and a simulated annealing algorithm was adopted to optimize the job-shop scheduling. A job scheduling scheme was generated randomly according to the coding rule. The job scheduling scheme generated randomly was used as the initial …
Simulation Contrast Analysis On Rigid And Flexible Movements Of Multi-Fins Coordinated Propulsion Mode,
2020
1. School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China;;2. School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou 215009, China;
Simulation Contrast Analysis On Rigid And Flexible Movements Of Multi-Fins Coordinated Propulsion Mode, Xie Ou, Boquan Li, Yan Qin
Journal of System Simulation
Abstract: A novel type of bionic underwater hybrid propulsion mode was proposed. By the means of the coordination control of the multi-fins, a propulsion mode combines the undulation propulsion of fish and the jet propulsion of jellyfish was developed, and was capable of achieving a serial of motions: undulating, jetting, turning, submerging, emerging and braking. The rigid and flexible water stabilizer kinematics model was established and the numerical simulation was performed for undulation and jet propulsion mode of the rigid and flexible water stabilizer by using a CFD method. The simulation results show that the dynamic characteristics and swimming performance …
Queuing System Simulation Optimization Of Subway Stair Width,
2020
1. School ofTransportation and Logistics, Southwest Jiaotong University, Chengdu 610031, Sichuan, China;;2. Key Laboratory of Comprehensive Transportation of Sichuan Province, Chengdu 610031, Sichuan, China;;3. National United Engineering Laboratory of Integrated and Intelligent Transportation, Chengdu 610031, Sichuan, China;
Queuing System Simulation Optimization Of Subway Stair Width, Yangsheng Jiang, Juanxiu Zhu, Hu Lu, Shifan Han
Journal of System Simulation
Abstract: Subway stair and passenger flow are described as a G/G(n, φ)/C/C state-dependent queuing system with a general random arrival interval and the general random service time that depends on the passengers number n and stair gradient φ. Simulation model of the queuing system was designed and optimization algorithm was developed. Thus, a new optimization method based on queuing system simulation for subway stair width was proposed. The simulation optimization method, the M/G(n)/C/C, and the D/D/1/C queuing model (the existing design code) were compared. The results show that: the stair widths of …
Stochastic Resonance In Time-Delayed Asymmetric Monostable System With Stable Noise,
2020
School of Automation and Information Engineering, Xi'an University of Technology, Xi'an 710048, China;
Stochastic Resonance In Time-Delayed Asymmetric Monostable System With Stable Noise, Shangbin Jiao, Li Jia, Zhang Qing, Xie Guo
Journal of System Simulation
Abstract: α stable noise with monostable system was combined to investigate the stochastic resonance of the asymmetric monostable with time delay or not driven by different stable noise. The numerical simulation study shows that the stochastic resonance exists not only in the asymmetric monostable system but also in the time-delayed asymmetric monostable system. The effects of the stability index α (0<α≤2) and symmetric parameter β(-1≤β≤1) of α stable noise, the monostable system parameter α, the amplification factor D of multiplicative stable noise, the asymmetry parameter r and the time delay on the signal-to-noise ratio gain of the system were explored.
Image Classification Based On Mixed Deep Learning Model Transfer Learning,
2020
1. Department of Computer, Shenyang Aerospace University, Shenyang 110136, China;;2. Liaoning General Aviation Key Laboratory, Shenyang Aerospace University, Shenyang 110136, China;;3. College of Information, Liaoning University, Shenyang 110036, China;
Image Classification Based On Mixed Deep Learning Model Transfer Learning, Xiangbin Shi, Xuejian Fang, Deyuan Zhang, Zhongqiang Guo
Journal of System Simulation
Abstract: In order to obtain high discrimination image representations in limited amount of datasets, the method based on mixed deep transfer learning model was proposed. When trained CNNs transferred to the target datasets, fully-connected layers were replaced by RBM layers. The method retrained the RBM layers and Softmax classifier, then fine-tuned the mixed model with backpropagation algorithm. The RBM layers not only fully connected whole feature maps, but also learned the target datasets' statistical features in the view of the biggest logarithmic likelihood, to eliminate the effects caused by the content differences between datasets. The experimental results show that the …
Boundary Conditions For Model Of Random Kelvin Cell Open-Cell Foam And Its Application On Open-Cell Aluminum Foam,
2020
1. Department of Computer and Information Engineering, Huainan Normal University, Huainan 232001, China;;
Boundary Conditions For Model Of Random Kelvin Cell Open-Cell Foam And Its Application On Open-Cell Aluminum Foam, Minju Qi, Guangfa Gao
Journal of System Simulation
Abstract: The random Kelvin cell open-cell foam model, the further investigations on the boundary conditions of the model were carried out using the Python scripting language and the commercial code ABAQUS. The ‘floating' edges in boundary, owing to being cut with slanted planes, were eliminated. The compressive behaviors of the material under free boundary condition and fixed boundary condition were investigated and comparatively analyzed. On the basis of the above results, the periodic boundary condition was developed, and the method of setting the periodic boundary condition under several different conditions was discussed. The methodology for the design and implement for …
Processing Method Of Space Locations Of Virtual Human Based On Wavelet Transform And Kalman Filter,
2020
State Key Discipline Laboratory of Armament Launch Theory and Technology, The Second Artillery Engineering University, Xi'an 710025, China;
Processing Method Of Space Locations Of Virtual Human Based On Wavelet Transform And Kalman Filter, Liang Feng, Zhili Zhang, Xiangyang Li, Zhibo Tang
Journal of System Simulation
Abstract: For the problem of inadequate smoothness of space location coordinate and large error of acceleration information, a processing method based on wavelet transform and Kalman filter was proposed to realize the valid control of virtual human' motion process after eliminating error points of motion data. Main acceleration information could be achieved based on the filter method of wavelet transform, and weak tracking Kalman filter was introduced to realize the amendment and smoothness of space location coordinates and acceleration information. Compared to the conventional Kalman filter method, the proposed method could achieve more exact and smooth space location and acceleration …
Path Planning And Control Simulation Of Unpowered Unmanned Aerial Vehicle (Uav) Returning To The Airport,
2020
1. Institute of Aircraft Design, Department of Mechanics and engineering science, Fudan University, Shanghai 200433, China;;
Path Planning And Control Simulation Of Unpowered Unmanned Aerial Vehicle (Uav) Returning To The Airport, Yijun Zhang, Yiqun Dong, Zhan Guang, Jianliang Ai
Journal of System Simulation
Abstract: The unpowered Unmanned Aerial Vehicle (UAV) return to the airport unpoweredly is a link of large risk and complex technology during the flight, and it is the key stage which affects the flight safety of the UAV. The basic control strategy and path planning of the unpowered UAV's back to the airport were studied, and the method which calculated the average drag of the return was proposed. Under the condition of multiple constraints, the flight control model of the UAV's return was established. It is proved that the result of the simulation is effective and has built a foundation …
Simulation Of Three Level Inverter Neutral Point Potential Control Based On Three Level Dc/Dc Converter,
2020
1. University of Shanghai for Science and Technology, Shanghai 200093, China;;
Simulation Of Three Level Inverter Neutral Point Potential Control Based On Three Level Dc/Dc Converter, Kun Xia, Xiaodi Li, Xiaobo Ding, Yanneng Zeng, Yiming Wang, Xu Po
Journal of System Simulation
Abstract: The DC capacitor voltage unbalancing of NPC three-level inverter not only makes the AC output performance worse, but also reduces the DC capacitors' service life and even damages the power devices. A method based on three-level DC/DC converter was put forward to control the neutral point potential of three-level inverter. This method realized power conversion with three-level DC/DC converter topology, boosting voltage and stabilizing the neutral point potential of DC link at the same time. It would regulate switches working states according to the constraint rules on the sum of switches off time deciding bus voltage and the ratio …
Application Of Recursive Least Square Method In Identication Of Dehydrogenation Reator,
2020
Key Laboratory of Industrial Computer Control Engineering of Hebei Province, Yanshan University, Qinhuangdao, 066004, China;
Application Of Recursive Least Square Method In Identication Of Dehydrogenation Reator, Guoyou Li, Ningning Gao, Wenhua Xia
Journal of System Simulation
Abstract: The current production methods of styrene at home and abroad are mainly dhydrogenation of ethylbenzene which accounts for more than 90% of styrene production capacity in the world. To save energy, it was needed to optimize the system and its premise was to know the mathematical model of ethylbenzene dehydrogenation reactor. Due to the complexity of the reactor internal structure, mechanism modeling was more difficult to establish objective and accurate mathematics models. To solve this problem, it was used recursive least squares to conduct parameter identification. On the basis of actual plant data, ethylbenzene dehydrogenation reactor mathematical model was …
Simulation Research Of Maglev Train During Uphill And Downhill Process,
2020
Key Laboratory of Magnetic Suspension Technology and Maglev Vehicle, Ministry of Education,Southwest Jiaotong University, Chengdu 610031, China;
Simulation Research Of Maglev Train During Uphill And Downhill Process, Songqi Li, Kunlun Zhang, Guoqing Liu, Chen Yin
Journal of System Simulation
Abstract: In the low speed EMS maglev test line experiments in Zhuzhou, it was found that vehicles are prone to hit the tracks, when the maglev train travels uphill or downhill through the tracks with slopes. This seriously affected the safety and comfort of the vehicle. In order to study the problem, a single low speed EMS maglev train carriages-track model with four degrees of freedom was built. It simulated and analyzed dynamic behaviors of the vehicle going uphill on different track curves, under different vehicle -track parameters. The simulation results show that the vehicle parameters, vehicle speed, and the …
Framework And Methodology For Logistics Simulation Based On Fidelity Theory,
2020
1. School of Automation, Beijing University of Posts and Telecommunications, Beijing 100876, China;;
Framework And Methodology For Logistics Simulation Based On Fidelity Theory, Yukun Liu, Fu Yu, Mengrui Shan
Journal of System Simulation
Abstract: The quality issue of simulation was studied from the perspective of fidelity. The basic concepts and dimension structures of simulation fidelity and simulation utility were defined according to the features of discrete event logistics system (DELS) simulation after a relationship analysis between fidelity and problems in DELS simulation. A fidelity-based four-stage lifecycle framework with prescriptive contents for each stage was constructed to improve the quality of simulation implementation. A simulation fidelity management process model (FMPM) was built to ensure three processes: pre-control of fidelity design, in-process fidelity management, and afterward fidelity evaluation. Operable methods and tools such …
