Nuclear Engineering Commons^™

Energy Deposition In A Graphene Field Effect Transistor Based Radiation Detector, Nickolas Upole, Robert Bean, Allen Garner

The Summer Undergraduate Research Fellowship (SURF) Symposium

The development of high-performance radiation detectors is essential for commercial, scientific, and security applications [1]. Due to the unique electronic properties of graphene (high-speed, low-noise), recent radiation detectors utilize graphene field effect transistors to sense charge carriers produced by radiation interactions in a gated semiconductor [2]. A study of the energy deposition due to the transport of gamma rays and electrons/positrons through typical elemental and compound semiconductors (Si, Ge, GaAs, and CdTe) will allow for a material optimization of these detectors. Geant4, a Monte Carlo based program that simulates the passage of particles through matter, was used to simulate Compton …

He+ Ion Irradiation On Tungsten Surface In Extreme Conditions, George I. Joseph, Jitendra Tripathi, Sivanandan S. Harilal, Ahmed Hassanein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Higher melting point (3695K), lower sputtering yield and most importantly, lower in-bulk, and co-deposit retention at elevated temperature makes tungsten (W) as a potential candidate for plasma-facing component (PFC) in the international thermonuclear experimental reactor (ITER)-divertor. Helium ion (He⁺) bombardment on W can cause wide variety of microstructural evolution, such as dislocation loops, helium holes/bubbles and fibre-form nanostructures (Fuzz) etc. In this work, 100 eV He⁺ ion irradiation, at temperature ranges from 500°C to 1000°C, will be performed on mechanically polished mirror like W surfaces. The surface modification and compositional analysis, due to ion irradiation, will be …

Doube-Pulse Laser-Induced Breakdown Spectroscopy Of Multi-Element Sample Containing Low- And High-Z Analytes, Patrick J. Skrodzki, Jason R. Becker, Prasoon K. Diwakar Ph. D., Sivanandan S. Harilal Ph. D., Ahmed Hassanein Ph. D.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Laser-induced breakdown spectroscopy (LIBS) is a portable, remote, non-invasive analytical technique which effectively distinguishes neutral and ionic species for a range of low- to high-Z elements in a multi-element target. Subsequently, LIBS holds potential in special nuclear material (SNM) sensing and nuclear forensics requiring minimal sample preparation and detecting isotopic shifts which allows for differentiation in SNM (namely U) enrichment levels. Feasible applications include not only nonproliferation and homeland security but also nuclear fuel prospecting and industrial safeguard endorsement. Elements of higher mass with complex atomic structures, such as U, however, result in crowded emission spectra with LIBS, and characteristic …

Optimizing Neutron Yield For Active Interrogation, Amanda M. Loveless, Allen L. Garner, Robert D. Bean, Nader Satvat

The Summer Undergraduate Research Fellowship (SURF) Symposium

Neutrons are commonly used for many applications, including active interrogation and cancer therapy. One critical aspect for active interrogation efficiency is neutron yield, which is more important for successful resolution than the energy spectrum. The typical approach for improving neutron yield entails producing more neutrons, which has motivated multiple studies using the interaction of increasingly more powerful tabletop lasers with plastic targets to generate protons or deuterons that are absorbed by another target to create neutrons [1]. Alternatively, one may use lenses to focus the neutrons to increase yield rather than simply generating more neutrons with more powerful lasers [2]. …

Double-Pulse Nd:Yag-Co2 Libs Excitation For Bulk And Trace Analytes, Jason R. Becker, Patrick Skrodzki, Prasoon Diwakar, Sivanandan Harilal, Ahmed Hassanein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Laser-induced breakdown spectroscopy [LIBS] is a commonly used technique for multi-element analyses for various applications such as space exploration, nuclear forensics, environmental analysis, process monitoring. The advantages of the LIBS technique include robustness, ease of use, field portability, and real-time, non-invasive multi-element analyses. However, in comparison to other lab based analytical techniques, it suffers from low precision and low sensitivity. In order to overcome these drawbacks, various approaches have been used, including double-pulse LIBS [DPLIBS]. Typically, various wavelength combinations of two Nd: yttrium aluminum garnet [YAG] lasers have been used for DPLIBS. However, the use of long wavelength (CO_{2 …}

Comparison Of Thermal And Γ-Photon Induced Degradation In Polylactic Acid For Potential As A Solid-State Radiation Detector, Nathan M. Boyle, Alex Bakken, Rusi P. Taleyarkhan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Degradation of the biopolymer Polylactic Acid, both thermally and through irradiation will cause physical changes in the material. These changes can be used in applications such as adhesives and sealants or in medical applications, but the primary focus of this study is for use as a solid-state radiation detector. A literature review shows that current research has been focused on thermal and γ-photon degradation in PLA but the physical characteristics such as melting temperature, latent heat of fusion, and composition of molecular bonds have not been compared in the same study. This study focuses on how thermal properties of PLA …

Neutron Spectroscopy With Scintillation Detectors Using Wavelets, Jessica Hartman

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to study neutron spectroscopy using the EJ-299-33A plastic scintillator. This scintillator material provided a novel means of detection for fast neutrons, without the disadvantages of traditional liquid scintillation materials. EJ-299-33A provided a more durable option to these materials, making it less likely to be damaged during handling. Unlike liquid scintillators, this plastic scintillator was manufactured from a non-toxic material, making it safer to use, as well as easier to design detectors. The material was also manufactured with inherent pulse shape discrimination abilities, making it suitable for use in neutron detection.

The neutron spectral unfolding …

Innovative Open Air Brayton Combined Cycle Systems For The Next Generation Nuclear Power Plants, Bahman Zohuri

Nuclear Engineering ETDs

The purpose of this research was to model and analyze a nuclear heated multi-turbine power conversion system operating with atmospheric air as the working fluid. The air is heated by a molten salt, or liquid metal, to gas heat exchanger reaching a peak temperature of 660 0C. The effects of adding a recuperator or a bottoming steam cycle have been addressed. The calculated results are intended to identify paths for future work on the next generation nuclear power plant (GEN-IV). This document describes the proposed system in sufficient detail to communicate a good understanding of the overall system, its components, …

Correlating Grain Size To Radiation Damage Tolerance Of Tungsten Materials Exposed To Relevant Fusion Conditions, Sean Robert Gonderman

Open Access Theses

Tungsten remains a leading candidate for plasma facing component (PFC) in future fusion devices. This is in large part due to its strong thermal and mechanical properties. The ITER project has already chosen to use an all tungsten divertor. Despite having a high melting temperature and low erosion rate, tungsten faces a large variety of issues when subject to fusion like conditions. These include embrittlement, melting, and extreme morphology change (growth of fuzz nanostructure). The work presented here investigates mechanisms that drive surface morphology change in tungsten materials exposed to fusion relevant plasmas. Specifically, tungsten materials of different grain sizes …

X-Ray Digital Industrial Radiography (Dir) For Local Liquid Velocity (Vll) Measurement In Trickle Bed Reactors (Tbrs): Validation Of The Technique, K. A. M. Salleh, M. F. A. Rahman, Hyoung-Koo Lee, Muthanna H. Al-Dahhan

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Local liquid velocity measurements in Trickle Bed Reactors (TBRs) are one of the essential components in its hydrodynamic studies. These measurements are used to effectively determine a reactor's operating condition. This study was conducted to validate a newly developed technique that combines Digital Industrial Radiography (DIR) with Particle Tracking Velocimetry (PTV) to measure the Local Liquid Velocity (V_LL) inside TBRs. Three millimeter-sized Expanded Polystyrene (EPS) beads were used as packing material. Three validation procedures were designed to test the newly developed technique. All procedures and statistical approaches provided strong evidence that the technique can be used to measure …

Towards The Development Of The Observability-In-Depth Safety Principle In The Nuclear Industry, Francesca Favaro, Joseph Saleh

Faculty Publications

No abstract provided.

Time Correlated Measurements Using Plastic Scintillators With Neutron-Photon Pulse Shape Discrimination, Norman Edison Richardson

UNLV Theses, Dissertations, Professional Papers, and Capstones

Since the beginning of the nuclear age, there has been a strong demand for the development of efficient technologies for the detection of ionizing radiation. According to the United States' Department of Energy, the accurate assessment of fissile materials is essential in achieving the nonproliferation goals of enhancing safety and security of nuclear fuel cycle and nuclear energy facilities [1]. Nuclear materials can be characterized by the measurement of prompt and delayed neutrons and gamma rays emitted in spontaneous or induced fission reactions [2] and neutrons emitted in fission reactions are the distinctive signatures of nuclear materials. Today, the most …

Drift-Flux Correlation Development For Two-Phase Flow In Rod Bundles, Collin M. Clark

Open Access Theses

A rod bundle drift-flux correlation is developed with intended application across a wide range of two-phase flow conditions. Special consideration is made for fluid flow mechanisms at low liquid velocity and low pressure conditions. In these instances, gravitational forces from the density difference of the associated fluid phases are more significant. Secondary flow patterns may develop as a result and a drift-flux correlation would need to make appropriate adjustments. Earlier correlations may have increased error at these conditions if they have been formulated with respect to relatively higher pressures or flow rates. In the present work, area-average void fraction data …

Understanding The Global Energy Crisis, Eugene D. Coyle, Richard A. Simmons

Purdue University Press Books

We are facing a global energy crisis caused by world population growth, an escalating increase in demand, and continued dependence on fossil-based fuels for generation. It is widely accepted that increases in greenhouse gas concentration levels, if not reversed, will result in major changes to world climate with consequential effects on our society and economy. This is just the kind of intractable problem that Purdue University’s Global Policy Research Institute seeks to address in the Purdue Studies in Public Policy series by promoting the engagement between policy makers and experts in fields such as engineering and technology.

Major steps forward …

Hybrid Tio2 Solar Cells Produced From Aerosolized Nanoparticles Of Water-Soluble Polythiophene Electron Donor Layer, Marshall L. Sweet, Joshua G. Clarke, Dmitry Pestov, Gary C. Tepper, James T. Mcleskey Jr.

Mechanical and Nuclear Engineering Publications

Hybrid solar cells (HSCs) with water soluble polythiophene sodium poly[2-(3-thienyl)-ethyloxy-4-butylsulfonate] (PTEBS) thin films produced using electrospray deposition (ESD) were fabricated, tested, and modeled and compared to devices produced using conventional spin coating. A single device structure of FTO/TiO2/PTEBS/Au was used to study the effects of ESD of the PTEBS layer on device performance. ESD was found to increase the short circuit current density (J_sc) by a factor of 2 while decreasing the open circuit voltage (V_oc) by half compared to spin coated PTEBS films. Comparable efficiencies of 0.009% were achieved from both device construction types. Current-voltage …

Detector Response Function Of An Energy-Resolved Cdte Single Photon Counting Detector, Xin Liu, Hyoung Koo Lee

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

BACKGROUND: While spectral CT using single photon counting detector has shown a number of advantages in diagnostic imaging, knowledge of the detector response function of an energy-resolved detector is needed to correct the signal bias and reconstruct the image more accurately.

Assessing The Effectiveness Of Workload Measures In The Nuclear Domain, Joseph Mercado

Electronic Theses and Dissertations

An operator's performance and mental workload when interacting with a complex system, such as the main control room (MCR) of a nuclear power plant (NPP), are major concerns when seeking to accomplish safe and successful operations. The impact of performance on operator workload is one of the most widely researched areas in human factors science with over five hundred workload articles published since the 1960s (Brannick, Salas, & Prince, 1997; Meshkati & Hancock, 2011). Researchers have used specific workload measures across domains to assess the effects of taskload. However, research has not sufficiently assessed the psychometric properties, such as reliability, …

Development Of A Nitrogen Incorporated Ultrananocrystalline Diamond Film Based Field Emitter Array For A Flat Panel X-Ray Source, Chrystian Mauricio Posada

Doctoral Dissertations

"As an alternative to conventional X-ray sources, a flat panel transmission X-ray source is being developed. A field emitter array (FEA) prototype to be incorporated as cold cathode in this flat panel X-ray source was fabricated for this work. Using the Particle-in-Cell code OOPIC Pro, an initial FEA was designed through simulations. Based on the simulation results, a FEA prototype was fabricated using conventional microfabrication techniques. Planar nitrogen-incorporated ultrananocrystalline diamond (N-UNCD) films were used as field emitters. This N-UNCD based FEA prototype was composed of 9 pixels distributed in a 3x3 array, with a pixel size of 225x225 µm, and …

Development Of A Flat-Panel X-Ray Source, Edwin Joseph Grant

Doctoral Dissertations

"A novel flat-panel transmission type X-ray source was developed for both medical and industrial use. Depending on the geometry of the given situation, the flat-panel X-ray source could be used in tomography, radiography or tomosynthesis. Furthermore, the unit could be used as a portable X-ray scanner or an integral part of an existing detection system. The design incorporates a field emission cathode made of ultra-nanocrystalline diamonds (UNCD) doped with nitrogen. These field emitters show good electron output at low power and can be deposited over large areas as is the case with carbon nanotube "forest" (CNT) cathodes. This work presents …

Synthesis Of Radioactive And Nonradioactive Nanostructures Through Radiolytic And Wet Chemistry, Jessika Viviana Rojas Marin

Doctoral Dissertations

"In this work the synthesis of non radioactive and radioactive nanoparticles (NPs) through radiolytic and wet chemistry was studied. Non radioactive NPs of rhenium, iridium, and rhodium were synthesized from aqueous solutions containing the metal salt precursors by gamma irradiation. The solutions were irradiated to generate reducing species that led to the nucleation and growth of the nanoparticles. Amorphous rhenium oxide nanoparticles with average sizes ranging from 10 nm to 55 nm were obtained. Metallic iridium and rhodium nanoparticles were produced in polyvinyl-pyrrolidone (PVP) having narrow particle size distributions and average particle sizes from 2 nm to 6 nm. The …