Geological Engineering Commons^™

Regional 3d Stability Analyses Of The Egkremnoi Coastline And Comparison With Landslides Caused By The 2015 Lefkada Earthquake, Weibing Gong, Dimitrios Zekkos, Marin Clark, John Manousakis, Dalia Kirshbaum

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Regional three-dimensional (3D) forward modeling stability analyses are presented for the Egkremnoi coastline of Lefkada Island in Greece. The pre-earthquake 5-m resolution DEM of the region was used as input for the regional 3D model and the modeling results were evaluated for five large landslides that occurred in the area during a Mw 6.5 earthquake that occurred in 2015. The area ratio and the overlap area ratio were defined to quantitatively assess the geospatial "match" between predicted and mapped landslides. Parametric analyses using variable material strength and DEM resolution were subsequently conducted to assess the influence of the input on …

Application Of 3d Seismic Signal And Geomechanical Attributes For Subsurface Fracture Characterization: A Case Study In Clearfield County, Central Pennsylvania, Iman F. Zulkapeli

Graduate Theses, Dissertations, and Problem Reports (ETD)

Hydrocarbon exploration in unconventional reservoirs is highly risky due to the nature of the reservoirs and the variability in fractures and reservoir geomechanical properties in the subsurface. The reservoir needs to be fully characterized to avoid any complication such as frac hit, wellbore failure, blowout, or even a dry hole. The Clearfield reservoir produces an exceptionally low amount of gas, compared to the neighboring region in the proximity, which has been poorly understood. This raises the question as to what causes the reservoir to have low productivity.

This study focuses on the natural fracture characterization using high-quality 3D seismic signal …

Evaluation Of Excavated Surface Irregularities And Hardness Of Mechanical Excavations And Their Relationship With Excavator Performance, Prosper Evaristus Akansah Ayawah

Doctoral Dissertations

"This research involved lab and numerical excavation of a clastic sedimentary rock (Roubidoux Sandstone) using a long-bladed disc cutter in a Linear Rock Cutting Machine (LCM) with the aim of establishing relationships between the cutting parameters, excavated surface parameters (underbreaks, overbreaks and hardness), and performance parameters (specific energy and cutting rate). Three-dimensional cutting forces were recorded during the linear cutting. A structured laser imaging system was used to image the excavated surfaces for the estimation of the irregularities (ridge volumes (RV) and overbreak volumes (OV)). The excavated surface hardness was measured using the N-type Schmidt hammer. The numerical simulation was …

Gis And Remote Sensing Groundwater Potentiality Investigation Of Gulu District, Uganda Using Synthetic Aperture Radar And Magnetic Geophysics, Rachel Ann Jones

Doctoral Dissertations

“Developing countries have few resources for ground-based hydrological investigations to determine optimal placement of boreholes for community water access. Remote sensing data are available at a variety of resolutions and sense different parameters, and are useful inputs for hydrologic models, but these data are rarely obtainable in developing countries with the parameters or resolutions necessary for hydrologic applications. This research seeks to use and improve existing remote sensing and GIS techniques to identify areas of optimal water supply in locations with limited geologic or hydrologic information, such as Gulu District, Uganda. Fusing different remotely sensed data sets can produce higher …

Use Of Portable Seismic Property Analyzer And Ground Penetrating Radar To Assess Bridge Decks, Samie Ramadan A Hamad

Doctoral Dissertations

The Montauk Bridge deck was assessed based on the portable seismic property analyzer and ground penetrating radar data. Based on the analysis of the portable seismic property analyzer data, it was determined that over 65% of bridge conditions were rated serious to poor condition with an average compressive strength of less than 2500 psi; less than 35% of bridge deck conditions were rated fair to good with an average compressive strength over 2500 psi. Based on ground penetrating radar data, it was determined that 72% of the bridge deck was in serious to poor condition, and only 28% of the …

Investigating The Impact Of Rock Bridges On The Mechanical Behavior Of Jointed Rock Mass Using Lattice Spring-Based Synthetic Rock Mass (Ls-Srm) Approach, Mariam Salem Alebayat

Doctoral Dissertations

"Rock bridges were defined as a segment of intact rock that separates from discontinuities. Numerous studies are focused on developing methods to quantify their significance in rock mass strength and deformability behavior. This thesis aimed to enhance understanding of the effect of rock bridges on jointed rock masses in both laboratory and slope scales. For this purpose, the lattice spring base Synthetic Rock Mass (LS-SRM) method was adopted to conduct the numerical models, distinguished in computational efficiency, and simulates the brittle failure and roughness of discontinuities.

A robust approach was developed to optimize the calibration procedure to avoid the complex …

Application Of The Ground Laser Scanning Results In Monitoring Of Adjacent Rock Masses Of Deep Careers, Sh Rahimov

Technical science and innovation

The method of laser scanning, used in combination with the traditional mine surveying, is one of the most effective and safest ways to carry out mine surveying and instrumental observations on deforming areas of open mining objects. The article presents the results of ground-based laser scanning of the Kharanutsky coal pit and a comparative analysis to determine the deformations and displacements of the sides for different periods, which was performed in the RISCAN PRO environment. Digital elevation models (DEM) were built, distinguishing observation cycles by color. As a result of comparison, the places of manifestation of deformations and displacements were …

Cosmostruct Ural Model Of The Malguzar Mountains For Ore Bearing Data Processing On The Laiyagun Mineralized Zone, A Abdullayev, O Zokirov, G Anna, E Kutie, Sh Akhmedov

Technical science and innovation

Analysis of geological prospecting, geological surveying, geochemical and other materials of the territory of the Malguzar Mountains allows us to note that here the ore-bearing formations are Silurian formations (sandstones, gravelstones, shales), crumpled into folds, which are complicated by a series of faults of north-west strike, zones of splitting and etc. These structures are rectilinear, their zone is characterized by the presence of small fracture structures, areas of swellings (Liyagun mineralized zone) and splits (Ardakshan area). The reason for these swelling and splitting, where gold mineralization is noted, remains not fully studied. The importance of studying these features of ore-controlling …

Bibliometric Survey On Effect Of Climate Factors On Spread Of Coronavirus (Covid-19), Seema Patil, Jay Makwana, Manish Attri

Library Philosophy and Practice (e-journal)

The new SARS-CoV-2 COVID-19 has spread quickly around the globe since it was first reported in Wuhan city of China, in December 2019 subsequent to being contracted from a zoonotic source. The main focus of this bibliometric survey is to recognize the few studies which have upheld the epidemiological hypothesis that the effect of climatic factors is playing a crucial role in the spreading of COVID-19. The analysis is done on the basis of 412 documents such as journals, articles, editorials, short surveys and some review papers. The United States contributes to the maximum number of publications followed by the …

Optimum Location Of Last-Mined Stope With The Influence Of Backfilling, Huawei Xu, Derek B. Apel

Journal of Sustainable Mining

Many mines in Canada have adopted sublevel stoping method or one of its variations, such as blasthole stoping (BHS) and sublevel longhole retreat (SLR), for the extraction of steeply dipping orebodies. Stope, as the basic excavated element, plays a significant role in the whole process of mining activity. In the mining method of BHS, crossing cuts are excavated at tops and bottoms in each stope for drilling blast holes and transportation of mined out orebodies. Crossing cuts failure may result in prolonged production interruption, fatality, and equipment loss. After the completion of orebodies excavation from the sublevel open stope, the …

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Inter-Annual To Inter-Decadal Spatiotemporal Effects Of Storm And Nourishment Events In North Myrtle Beach, South Carolina, Christina Mary Boyce

Electronic Theses and Dissertations

No abstract provided.

Version 2 Ozone Monitoring Instrument So2 Product (Omso2 V2): New Anthropogenic So2 Vertical Column Density Dataset, Can Li, Nickolay A. Krotkov, Peter J.T. Leonard, Simon Carn, Joanna Joiner, Robert J.D. Spurr, Alexander Vasilkov

Michigan Tech Publications, Part 1

The Ozone Monitoring Instrument (OMI) has been providing global observations of SO2 pollution since 2004. Here we introduce the new anthropogenic SO2 vertical column density (VCD) dataset in the version 2 OMI SO2 product (OMSO2 V2). As with the previous version (OMSO2 V1.3), the new dataset is generated with an algorithm based on principal component analysis of OMI radiances but features several updates. The most important among those is the use of expanded lookup tables and model a priori profiles to estimate SO2 Jacobians for individual OMI pixels, in order to better characterize pixel-to-pixel variations in SO2 sensitivity including over …

Constructing A Complete Landslide Inventory Dataset For The 2018 Monsoon Disaster In Kerala, India, For Land Use Change Analysis, Lina Hao, Rajaneesh A., Cees Van Westen, Sajinkumar K. S., Tapas Ranjan Martha, Pankaj Jaiswal, Brian G. Mcadoo

Michigan Tech Publications, Part 1

Event-based landslide inventories are important for analyzing the relationship between the intensity of the trigger (e.g., rainfall, earthquake) and the density of the landslides in a particular area as a basis for the estimation of the landslide probability and the conversion of susceptibility maps into hazard maps required for risk assessment. They are also crucial for the establishment of local rainfall thresholds that are the basis of early warning systems and for evaluating which land use and land cover changes are related to landslide occurrence. The completeness and accuracy of event-based landslide inventories are crucial aspects to derive reliable results …

Using Tandem-X To Measure Pyroclastic Flow Source Location, Thickness And Volume: Application To The 3rd June 2018 Eruption Of Fuego Volcano, Guatemala, F. Albino, J. Biggs, R. Escobar-Wolf, A. Naismith, M. Watson, J. C. Phillips, G. A. Chigna Marroquin

Michigan Tech Publications, Part 1

The estimation of the volume of volcanic flows during an ongoing eruption is challenging but this information is crucial for improving risk assessment and for forecasting future events. Although previous studies have shown the ability of TanDEM-X satellite data to derive the thickness and the volume of lava flow fields during effusive eruptions, the method has not been explored yet for pyroclastic flows. Using bi-static interferometry, we produce TanDEM-X DEM on Fuego volcano (Guatemala) to measure the significant topographic changes caused by the 3rd June 2018 eruption, which destroyed the town of San Miguel Los Lotes. We estimate the volume …

Wetting-Driven Formation Of Present-Day Loess Structure, Yanrong Li, Weiwei Zhang, Shengdi He, Adnan Aydin

Faculty and Student Publications

© 2020 The Authors Present-day loess, especially Malan loess formed in Later Quaternary, has a characteristic structure composed of vertically aligned strong units and weak segments. Hypotheses describing how this structure forms inside original loess deposits commonly relate it to wetting-drying process. We tested this causal relationship by conducting unique experiments on synthetic samples of initial loess deposits fabricated by free-fall of loess particles. These samples were subjected to a wetting-drying cycle, and their structural evolutions were documented by close-up photography and CT scanning. Analysis of these records revealed three key stages of structural evolution: initiation (evenly distributed cracks appear …

Effect Of Geometry And Fluid Viscosity On Dynamics Of Fluid-Filled Cracks: Insights From Analog Experimental Observations, Haitao Cao, Ezequiel F. Medici, Gregory P. Waite, Roohollah Askari

Michigan Tech Publications, Part 1

Fluid-filled volumes in geological systems can change the local stress field in the host rock and may induce brittle deformation as well as crack propagation. Although the mechanisms relating fluid pressure perturbations and seismicity have been widely studied, the fluid-solid interaction inside the crack of a host rock is still not well understood. An analog experimental model of fluid intrusion in cracks between planar layers has been developed to study stress conditions at the margins and tips. A combined high-speed shadowgraph and a photoelasticity imaging system is used to visualize the fluid dynamics and induced stresses on the solid matrix. …

Design And Development Of A Machine Vision System Using Artificial Neural Network-Based Algorithm For Automated Coal Characterization, Amit Kumar Gorai, Simit Raval, Ashok Kumar Patel, Snehamoy Chatterjee, Tarini Gautam

Michigan Tech Publications, Part 1

Coal is heterogeneous in nature, and thus the characterization of coal is essential before its use for a specific purpose. Thus, the current study aims to develop a machine vision system for automated coal characterizations. The model was calibrated using 80 image samples that are captured for different coal samples in different angles. All the images were captured in RGB color space and converted into five other color spaces (HSI, CMYK, Lab, xyz, Gray) for feature extraction. The intensity component image of HSI color space was further transformed into four frequency components (discrete cosine transform, discrete wavelet transform, discrete Fourier …

Global Aeolian Dust Variations And Trends: A Revisit Of Dust Event And Visibility Observations From Surface Weather Stations, Xin Xi

Michigan Tech Publications, Part 1

This study revisits the use of horizontal visibility and manually reported present weather (ww) records from the NOAA Integrated Surface Database (ISD) for characterizing the aeolian dust variability and recent trends over the globe and three largest source regions (North Africa, Middle East, and East Asia). Due to its qualitative nature, ww is combined with visibility to derive a new variable, VI, which has higher correlations with the dust emission and burden from satellite observations and global aerosol reanalyses than does the dust event frequency (FR) derived from ww only. Both FR and VI capture …

Utilizing Hyperspectral Remote Sensing For Soil Gradation, Jordan Ewing, T. Oommen, Paramsothy Jayakumar, Russell Alger

Michigan Tech Publications, Part 1

Soil gradation is an important characteristic for soil mechanics. Traditionally soil gradation is performed by sieve analysis using a sample from the field. In this research, we are interested in the application of hyperspectral remote sensing to characterize soil gradation. The specific objective of this work is to explore the application of hyperspectral remote sensing to be used as an alternative to traditional soil gradation estimation. The advantage of such an approach is that it would provide the soil gradation without having to obtain a field sample. This work will examine five different soil types from the Keweenaw Research Center …