Engineering Education Commons^™

The Bell Academy: A Bridge Semester Where Engineering Students Transform Into Student Engineers Who Thrive In Industry Placements, Darcie Christensen, Lauren Singelmann, Cody Mann, Bart Johnson, Ron Ulseth

Practice Papers

Iron Range Engineering is an innovative learning program using project-based and work-based pedagogies. The Bell Academy (BA) is a semester-long bridge experience between the first two years of STEM foundation and the final two years spent in full-time industry co-op placements. The curriculum within the academy is delivered within three domains: technical, design, and professional. The transformation to thriving as a student engineer in an industry placement is intentionally embedded in each stage of the program as students develop higher levels of self-awareness, professional responsibility, and self-directedness. Students not only gain technical engineering knowledge, but also apply that knowledge within …

Improving Teaching Quality In Higher Education: A Practitioner's Guide To Using Formative Teaching Analysis Poll, Thies Johannsen, Henning Meyer

Practice Papers

Teaching Analysis Poll (TAP) has become an increasingly popular tool for evaluating teaching quality and enhancing student learning outcomes in higher education. It requires, however, additional human resources. This paper presents a modified version for easy implementation: Formative Teaching Analysis Poll (FTAP). It can be used by an individual educator and is nonetheless an effective practical method for practitioners in higher education to improve their teaching quality and enhance the learning experience of their students.

Based on a review of literature and personal experience using FTAP, in this paper we provide an overview of the underlying methodology of FTAP, its …

Stem Education And Research At The University Of Aruba For Sustainable Development Of Small Island Developing States: Case Studies On Energy Efficiency And Waste Management., Alba De Agustin Camacho, Mieke De Droog, Wim Van Petegem

Practice Papers

SISSTEM “Sustainable Island Solutions through Science, Technology, Engineering and Mathematics” is a higher educational programme created in 2019 at the University of Aruba in response to the need for engineering education and research in Small Island Developing States (SIDS). In this contribution, the SISSTEM programme is introduced, and how SISSTEM equips engineering students with hard and soft skills while addressing local sustainability challenges is showcased through two case studies. The first case study presents a bachelor course that combines sustainability theory with a teamwork project in which students conduct an energy audit to a local institution. With this course, students …

Towards Building A Framework For Continuing Engineering Education In Higher Education Institutions: A Comparative Study, Sonia M. Gomez Puente, Christopher Smith, Matias Urenda Moris, Bente Nørgaard, Hans-Ulrich Heiss, Patricia Caratozzolo, Katriina Schrey, H-R Myllymäki, Rigas Hadzilacos

Practice Papers

Continuing engineering education (CEE) is becoming an attractive notion of continuously enhancing and upgrading the engineering skills required by the Fourth Industrial Revolution. Current developments in science and technology and the challenges to address the United Nations Sustainable Development Goals (UN SDGs) of the 2030 Agenda require updating theoretical knowledge, skills, and specific practical work. Even though higher education institutions (HEIs) can provide CEE or CPD (Continuing Professional Development) within or external to degree programs, CEE focuses on training engineers as lifelong learners to meet societal and industrial needs. A comparative study was conducted among eight universities to analyse the …

Digitalisation As An Opportunity For Women In Stem: Researching The Nexus Of School, University And Labour Market, Yves Jeanrenaud, Anna-Kathrin Wimmer

Practice Papers

In Germany, women are still dramatically underrepresented in the fields of STEM, especially in engineering: less than 25 percent of engineering students are female. Correspondingly underrepresented are women in engineering positions, too. Research has shown that diversity in the work force is crucial to develop successful solutions for a complex and sustainability-oriented world.

Therefore, our ongoing research project (01FP22M01), funded by the Federal Ministry of Education and Research (BMBF), focusses on the underrepresentation of women in STEM, especially in mechanical and plant engineering. Using mixed methods of qualitative interviews and quantitative online surveys with female pupils, students and employees, as …

Instructors' Expectations And Objectives For Integrating Sustainable Development And Ethical Issues Into The Curriculum, Tauno Aki Tepsa, Juhani Angelva, Maisa Tuulikki Mielikäinen

Practice Papers

The integration of sustainable development and ethical issues into the curriculum is increasingly important in higher education. The study surveyed 17 instructors in ICT engineering education at Lapland University of Applied Sciences who were involved in curriculum development to explore their expectations and objectives in integrating sustainable development and ethical issues into their courses. Although most instructors had a good understanding of sustainable development and ethical issues, not all saw them as relevant to their courses. Those who did incorporate these themes focused on topics such as energy conservation, social sustainability, and sustainability and ethics in solutions. However, almost half …

Engineering Curriculum Redesign: Is My School Ready For This?, Aikaterini Bagiati, Julia Reynolds-Cuéllar

Practice Papers

As humanity keeps facing grand challenges engineers are expected to be at the forefront and keep providing sustainable solutions to extremely complex problems. In the meantime, we have reached an era where technological advancement moves at a very rapid speed. That poses a big question to academia. “How should we educate engineers to ensure that they are best prepared for a complex world?” For an engineering curriculum to remain effective and relevant frequent redesign is critical. Despite this generally agreed upon understanding, universities sometimes operate under great pressure and move into initiating curricular change without having considered how multifactorial this …

Flash Observations For Improved Teaching Quality Among Graduate Teaching Assistants In Engineering Education, Sarah Plumb, Joanna Bates, Panos Lazari, Matteo Di Benedetti

Practice Papers

To maintain high quality, when teaching practical activities at scale, sufficient Graduate Teaching Assistants (GTAs) must be employed. However, their pedagogical skills are inconsistent. This research is a pilot study to test the reliability and validity of research methods which will be scaled up in their application to the primary research to identify GTA pedagogical skills requiring further training. In the primary study, staff and GTA perspectives will be collected using surveys, and the emerging deficient skills will be further investigated using novel twenty-minute “flash” skills-based teaching observations of GTAs. Observation time will be split among the GTAs, and the …

Bachelor's Thesis Seminar In Computer Sciences And Information Technology, Matti Haavisto, Hannu-Matti Järvinen, Terhi Kilamo, Saila Ovaska, Timo Poranen

Practice Papers

A Bachelor’s thesis is typically an individually written literature review on a scientifically relevant topic. Additionally, some theses also describe empirical work or report an experiment. Firstly, we introduce how Bachelor’s theses are supervised in a joint thesis seminar for Computer Sciences and Information Technology at our university. The thesis seminar is organized three times a year. It consists of six small group meetings led by a supervisor and contains compulsory pre- and post-assignments and active peer discussions. In 2022, there were in total of 187 students participating in the spring, summer and autumn seminars. Secondly, we give an overview …

Amplifying New Voices And Making Space For Alternative Knowledge Systems In Engineering Curricula – The Example Of Ubuntu, Anita Occhio, Fiona Caroline Saunders, Gladson Chikwa, Dawn Theresa Nicholson

Practice Papers

Engineering projects are ubiquitous; from developing COVID-19 vaccines to building new cities and developing climate change solutions. An inclusive approach to teaching engineers how to master the complexities of engineering project management is vital to the deliverability of sustainability and net zero initiatives (Hockings 2010). Yet, our engineering curricula remain deeply rooted in Western epistemology (Winter et al. 2022, Mbembe 2015). Arguably, this is an opportune time to consider decolonising our curricula. At a fundamental level, ‘decolonising the curriculum’ means introducing previously ignored voices, images, authors, theories and arguments into our teaching (Rogers et al. 2022). This is a challenge …

Management Education In An Engineering Environment. The Case Of Bme, Mária Szalmáné Csete, Emma Lógó, Bence Bodrogi, Tamás Koltai

Practice Papers

Engineering higher education institutes need to integrate new skills and competences into their practice and curricula to accelerate the sustainability transition.

This paper introduces the interdisciplinary upskilling of engineering students enrolled in engineering programs at the Budapest University of Technology and Economics (BME) and which has been provided by the Faculty of Economic and Social Sciences (GTK) since 1998. The BME GTK delivers an educational experience that fits into the environment defined by the engineering faculties at BME. The BME GTK has experience of more than a quarter of a century in engineering education related to socio-economic and management upskilling. …

Setting Up An Engineering "Pilot Study Program" In E-Mobility" For International Students: Issues And Solutions, Meike Herbert, Alexander Nasarow, Oliver Kreis

Practice Papers

This practice paper presents the issues and solutions in introducing a new international engineering study program at a German university that attracts especially non-European students. The master’s program electromobility with the four majors Artificial Intelligence and Autonomous Driving, Connectivity, EPowertrain and Sustainable Mobility & Production Technology was newly introduced in the winter semester 2022/23. It combines the expertise of all engineering departments like mechanical engineering, electrical engineering, computer science and artificial intelligence, materials science and chemical engineering to offer a modern and attractive engineering education for sustainability in an ecologic and economic important field. The high amount of applications with …

An Embodied Cognition Approach To Collaborative Engineering Design Activities, Gitte Van Helden, Barry Zandbergen, Anna Shvarts, Marcus Specht, Eberhard Gill

Practice Papers

Higher educational institutions have broadly adopted Collaborative Engineering Design (CED) activities to prepare students for complex problem-solving in multidisciplinary settings. These activities are non-linear and mediated by various social practices and tools. Therefore educators might struggle in facilitating the achievement of specific learning goals. Embodied cognition is an approach that explains non-linear behaviour through orgamism-environment interactions and might therefore provide educators with insights on how to prompt students towards desired actions in CED activities. According to embodied cognition, we learn through actions that emerge as a response to a problem (task) and environmental constraints. Educators can guide students’ behaviour by …

(Re)Defining Engineers’ Resilience: Part Ii Reflexive Accounts Of Doing Reflexive Thematic Analysis, Natalie Wint

Practice Papers

This work accompanies another paper which describes interpretivist qualitative research that made use of data from semi-structured interviews pertaining to how engineering educators conceptualize resilience and support students in its development. In that work, we utilized reflexive thematic analysis (RTA) for several reasons. Firstly, it is considered a useful method for under-researched areas. Secondly, its flexibility allows for inductive and deductive theme generation. Finally, it is considered a reasonably accessible method which we believe is important when considering 1.) the varied audience of engineering education research (EER) and 2.) the relative lack of consensus as to acceptable theoretical frameworks or …

Educating Future Robotics Engineers In Multidisciplinary Approaches In Robot Software Design, Astrid Van Der Niet, Cilia Claij, Gillian Saunders-Smits

Practice Papers

In 2020, a new two-year MSc programme in robotics was launched. Unlike most existing robotics programmes, which approach robotics from a specific discipline, this programme aims to train multi-deployable robot generalists using a cognitive approach (no hardware creation). The field of robotics is multidisciplinary by nature and educating students on how to approach projects with a multidisciplinary mindset is at the forefront of the programme. Hence, at the end of the first year, students are thrust into experiencing the true multi-disciplinarity of the robotics field in a synthesizing, multidisciplinary project-based course. In this 5 EC course, students work together in …

The Power Of Perspective Dialogue: Unlocking Transformative Reflection In Engineering Education (Practice), Pleun Hermsen, Sjoerd Van Dommelen, Paula Hueso Espinosa, Maartje Van Den Bogaard

Practice Papers

Engineers need to be socially responsible, ethically aware and deliver positive contributions to the wicked problems2 of today's global challenges. In navigating these challenges, being able to reflect is a necessary prerequisite. But if we simply ask students reflective questions, they tend to give us mostly socially desirable answers. Our university initiated an institute-wide program focused on creating learning experiences and environments for transformative reflection instead of superficial reflection. In this paper we present design principles for transformative reflection based on a literature overview and the program's accumulated experience. The principles are I) Six domains for reflection on engineering issues, …

Challenge-Based Learning In Courses: The Implementation Continuum, Adina Imanbayeva, Robin De Graaf, Cindy Poortman

Practice Papers

Given the increasing criticality and complexity of societal challenges, higher education institutions are urged to equip students with the ability to develop sustainable solutions for 'wicked' problems. Consequently, the Challenge-based Learning (CBL) framework has attracted considerable interest in higher engineering education. However, transforming existing course curricula to CBL is a challenging endeavour since it requires careful and paced execution for maintaining the quality, synergy, and flow of existing education. Therefore, this paper proposes a perspective on CBL implementation that exemplifies a gradual transition towards educational CBL innovation while reflecting on the alignment, consistency, and coherence educators aspire to when designing …

Measuring Effects Of Mini-Lectures On Improving Student Engagement And Outcomes, Vincent Engbers, Rowel Gündlach, Marta Regis, Maria Vlasiou

Practice Papers

In the current age, digital advancements have shaped the educational landscape by providing numerous possibilities for a fast and on-demand influx of information for students. This brings an additional difficulty for course designers in how to incorporate such technologies in teaching in an optimal way. Key examples are educational videos, which are especially relevant now due to the increase in accessibility of pre-made videos and recording technology since the pandemic. This puts post-pandemic teaching in the new but revolutionary position to complement in-person teaching with videos.

In this study, we examine the effect of videos combined with in-person teaching in …

Enhancing Professional Skills Among Engineering Students By Interdisciplinary International Collaboration, Thomas Mejtoft, Helen Cripps, Melissa Fong-Emmerson, Christoper Blöcker

Practice Papers

Providing necessary knowledge and skills for engineering students to become successful professionals is a tricky task. Besides disciplinary knowledge, e.g., communication skills, ability to work in teams, and international experience are often mentioned as important. Regarding internationalization, most engineering programs in Sweden rely on either student exchange or low-level internationalization-at-home, such as international literature and lecturers. This paper explores sustainable international experiences for students on their home turf provided through an international interdisciplinary collaboration where engineering students in Sweden and marketing students in Australia work together on a project. The setup simulates a consultancy firm with development and marketing offices …

What Do We Know About Our First-Year Engineering Students' Backgrounds And Experiences?, Gavin Buskes, Shannon Rios

Practice Papers

Students entering university come from a wide variety of backgrounds and experiences, with differing levels of knowledge and exposure to professional skills. However, university entry criteria typically focus on academic ability in particular subject areas such as maths and physics, but little information is known about students’ attitudes and abilities in a variety of other, important domains such as attitude towards engineering, communication skills and level of interaction with peers. Self-concept, a cognitive evaluation that an individual makes and customarily maintains with respect to themselves concerning their ability in a general or a specific area of knowledge, can be used …