Engineering Education Commons^™

Lunabotics: A Student Competition For Exploring The Challenges Of Regolith Harvesting In Extraterrestrial Environments, Ethan Hopping, Roberto Dextre

Von Braun Symposium Student Posters

No abstract provided.

2013 Student Launch Initiative Project With Dielectrophoresis, Amit Patel, Jacob Cranford

Von Braun Symposium Student Posters

No abstract provided.

Sweet (Small Wind Energy Estimation Tool), Thomas Woolmington, Keith Sunderland

Other resources

Description:

Generic Wind Energy Estimation Model incorporating Turbulence Intensity.

Requirements:

Manufacturer specific wind turbine characteristic

Mean wind speed at a specific height

Site conditions in terms of TI and Surface Roughness

Disclaimer:

This model has been designed as an estimation tool for estimating the wind power yield of a custom turbine for an idealised set of site conditions for a given year.

While the assumptions that are made in this estimation tool are mathematically plausible they should not in any way be interpreted as an alternative to a real world site assessment.

A list of assumptions to which the model …

Free Your Mind-Unlock Your Inner Creativity, Alyssa Black, William Dow, Stephanie Harrison, Adam Kerbs, Katheleen Mcguire, Phillip Stroch, Jessica Urbano, Bradley Chase, Frank G. Jacobitz, Thomas Schubert

School of Engineering: Faculty Scholarship

Creativity is a major factor in many careers, subjects, and disciplines. Although many people first assume engineering to be a field of study that does not require any creativity, it is actually an essential tool for successful engineers. The mark of a truly accomplished engineer is the ability to problem-solve effectively; in other words, to generate creative solutions. Although the goal as engineers is to become more creative throughout one’s career, is it even possible to gain creativity? Is creativity an innate quality, or a learned one? Since the engineering process demands creativity, we looked into how creativity can be …

Bridging The Gap Between Engineering Design And Pk-12 Curriculum Development Through The Use The Stem Education Quality Framework, Margaret Pinnell, James Rowley, Sandi Preiss, Rebecca P. Blust, Rebecca Beach, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

This paper will describe a unique partnership among the Department of Teacher Education and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership resulted in the development of the STEM Education Quality Framework (SQF), a tool to guide educators in teaching, learning and refining STEM education. The SQF resulted in a variety of educational tools, including a STEM curriculum template, that was implemented in the DRSCs teacher professional development and curriculum development program entitled the STEM Fellow Program. The STEM Fellow program was later modeled in a unique, NSF sponsored six …

Issues In Organisation And Management Of Multidisciplinary Group Design Projects, Ken Keating, Claire Brougham, Graham Gavin, Ger Reilly

Conference Papers

No abstract provided.

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …

An Engineering Physics Introduction To Electronics For Ece Sophomores, Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

Electronic devices and circuits are fundamental parts of undergraduate curricula in electrical engineering and computer engineering (ECE). A sophomore-level course that gives a balanced treatment of semiconductor device physics and electronic circuit analysis is described. The course topics are semiconductor physics, diodes, transistors, operational amplifiers, and optoelectronics. The course is a prerequisite for upper-level electronics, semiconductor physics, and semiconductor circuit layout curricula. A stronger link between physical principles and device behavior and an improved sequence in electronics instruction are outcomes.

Educating The Professional Engineer Of 2020: The Changing Licensure Requirements, Susan L. Murray, Terri M. Lynch-Caris

Engineering Management and Systems Engineering Faculty Research & Creative Works

Engineering education programs would be well served to align their curricula and program outcomes to the Fundamentals of Engineering (FE) Exam and Professional Engineer (PE) Exam specifications. These exams are required steps in the process of becoming a licensed engineer in most states. NCEES (the National Council of Examiners for Engineering and Surveying) is a national nonprofit organization dedicated to advancing professional licensure for engineers and surveyors. It develops, administers, and scores these examinations used for engineering licensure. Starting in 2011, NCEES held survey-creation meetings with diverse teams to develop a draft survey containing the subjects in each discipline and …

Beyond Jee: Finding Publication Venues To Get Your Message To The ‘Right’ Audience, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

Very few publications exist outlining the different publishing opportunities within engineering education as a discipline. Most researchers think immediately of the Journal of Engineering Education (JEE), and as the primary publication associated with the American Society for Engineering Education it is a logical first thought.

Questions arise with new graduate students and young faculty who are trying to learn the scope of engineering education as a research discipline and need to identify possible publication venues. A broad list of publications has been generated and is maintained by the ASEE Student Division in cooperation with the Center for Engineering Learning and …

Educating For Evidence Based Decisions In Engineering: The View As Librarian And Instructor, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

The First Year Engineering program at Purdue University is regularly reviewed and revised to adapt to the needs of the students, feedback from teaching faculty, and the changing needs of the university curriculum. In the last year, a unifying theme was added to the class to help tie all the different activities together. That theme was “evidence based decision making in engineering”, a perfect fit for introducing and discussing information literacy many times throughout the semester, rather than in a single, isolated session.

As instructor for one section of the class, the author identifies benefits to including this message throughout …

Public Works For Public Learning: A Case Study, Thalia Anagnos, Beckey Carroll, Shannon Weiss, David Heil

Faculty Publications

Large scale and small scale public works projects are important in the smooth operation of every community, yet a majority of the population has little awareness of how these projects work and what their functions are. Few non-engineers understand the engineering challenges of delivering clean water, disposing of our sewage, or changing a traditional intersection into a round-about, a project that seems quite simple on the surface. A consortium of public works engineers, science museums, faculty, and exhibit evaluators were awarded a grant by the National Science Foundation to build an outdoor museum next to a large suspension bridge. The …

The Arrows In Our Backs: Lessons Learned Trying To Change The Engineering Curriculum, Steven W. Villachica, Anthony Wayne Marker, Donald Plumlee, Linda Huglin, Amy Chegash

Organizational Performance and Workplace Learning Faculty Publications and Presentations

Published research has provided a robust set of documented tools and techniques for transforming individual engineering courses in ways that use evidence-based instructional practices. Many engineering faculty are already aware of these practices and would like to use them. However, they still face significant implementation barriers. The E²R2P effort addresses the question: How can successes in engineering education research translate into widespread instructional practice?

This poster session will describe hard-won lessons the E²R2P team has learned as it begins its third year attempting such curricular change.

Lesson 1: “Wonder workshops” and visible course redesigns don’t produce …

Quantitative Assessment Of Program Outcomes Using Longitudinal Data From The Fe Exam, Joe C. Guarino, James R. Ferguson, V. Krishna C. Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

There have been many studies providing details on using results from the Fundamentals of Engineering (FE) exam as metrics for meeting ABET program outcomes¹. However, implementing an FE-based set of metrics poses challenges not limited to assessing validity of results. Programs using FE-based metrics must also determine the position of the metrics in the overall assessment process. We present a method for using FE-based metrics as an integral part of the ABET program assessment process. The principle issues we address are: (1) The validity of using FE metrics for a group of graduating students when not all of …

Public Works Projects As Vehicles For Engineering Education And Outreach, Shannon Weiss, David Heil, Thalia Anagnos

Faculty Publications

America is built on small and large feats of public works engineering that, although often taken for granted, affect almost every aspect of our daily lives. So how can we celebrate these marvels of utilitarian infrastructure and use them to teach public audiences about the engineering principles, materials, and human innovations that make them possible? This case study will share how one project addressed these questions by leveraging informal learning strategies, multi-agency collaborations, and new media technologies to explain the history and engineering of one of the world’s most recognizable public work sites: the Golden Gate Bridge. This paper will …

Curriculum Exchange: “Make Your Own Earthquake”, Sandra Seale, Thalia Anagnos, Lelli Van Den Einde

Faculty Publications

A consortium of American universities is involved in earthquake engineering practice and research. Each campus of the consortium participates in outreach and education activities for the local schools and the public. One campus of the consortium, which operates earthquake field sites, designed a K-12 activity called “Make Your Own Earthquake” (MYOE). MYOE involves setting up earthquake field equipment (seismic instruments, data loggers, and computers) in a classroom. Children jump for 10 seconds, see their earthquake trace live on a computer screen and then take home a printed copy of their personal earthquake. Software was developed specifically for this activity. MYOE …

Curriculum Exchange: Visualization Tools And Online Courses For Teaching About Earthquakes, Sandra Seale, Thalia Anagnos

Faculty Publications

As part of a national consortium of universities practicing and doing research in earthquake engineering, our site has developed several videos for use in outreach and education. Visualization tools are extremely useful when teaching about how earthquakes shake the ground and the response of buildings to that shaking. Here we present videos that are targeted to specific audiences: (1) Animations of the response of two model buildings to two earthquakes are targeted at grade 6-16 students. The videos were created with data recorded on these test structures from the two earthquakes. The two events were both located directly below the …

Attracting College And High School Students To Study Engineering Technology Through Hands-On Mechatronics Product Design Projects, Andy S. Zhang, Sidi Berri, Iem H. Heng, Farrukh Zia

Publications and Research

Attracting College and High School Students to Study Engineering Technology Engineering technology encompasses many engineering technology fields: mechanical engineering technology, electrical engineering technology, and computer engineering technology, etc. This poster presents the work on using hands-on mechatronics design activities to attract high school and college students to study engineering technology. Technology education has been a key in producing college graduates to work in today’s fast paced, highly competitive public and private enterprises. Unfortunately, the supply of qualified workforce has been reduced in the United States due to the steady drop of enrollment of college and high school students in STEM …

Intradepartmental Collaboration To Improve The Quality Of Engineering Drawings Created By Students In Senior Design Project, Andy S. Zhang, Gaffar Gailani

Publications and Research

Engineers use engineering graphics to describe their design, to exchange ideas, and to communicate with others. As an important communication tool, most engineering department commits at least two courses on engineering graphics. The mechanical engineering technology at the college offers three engineering graphics courses for its associate degree program. The objective is to give students opportunity to get familiar with different type of engineering graphics from 2D to 3D and from general graphics to mechanical engineering specific graphics gradually so they can apply these engineering graphics skills in their senior courses such as in machine design. Despite the extensive offering …