Industrial Engineering Commons^™

Investigating The Integration Of Demand Distribution Modeling In Supply Chain Simulation, Marshal Ray

Industrial Engineering Undergraduate Honors Theses

This research presents a methodology for modeling the amount of demand and the time intervals between demands within a complex supply chain simulation program. The research outlines the approach, incorporating factor analysis and consolidation techniques, with a focus on using Random Forest modeling for factor importance identification. The results section covers demand quantity modeling utilizing both continuous and discrete empirical approaches, accompanied by considerations for outlier and overall distributions. While using these modeling techniques, P-P plots and KS-Statistics were employed to assess the goodness of fit, as a way to make recommendations for these models. The time between demand modeling …

Establishing Employee Sense Of Belonging In A Busy Work Environment, Zoe A. Rodriguez

2024 Spring Honors Capstone Projects - Archive

This honors thesis capstone project explores the concept of an employee’s sense of belonging within a busy work environment. A department within ABC Company faces operational challenges regarding their daily tasks. The Honors contribution addresses the comparison between the busy work environment at ABC Company and existing literature to provide scholarly-supported recommendations and mitigation strategies for ABC Company. Existing literature underscores the importance of understanding contributing influences on an employee’s sense of belonging within the workplace. The honors contribution adds value by closing the information gap within companies that operate under a busy work environment and strategies of how to …

A Design Science And Implementation Framework For Studying Interruptions And Its Application In A Dental Clinic., Carsten Ziegler

Electronic Theses and Dissertations

Interruptions during dental treatment are frequent, and often have detrimental effects on quality of care, patient safety and processing times, and have an impact on provider satisfaction and performance. Interruptions can significantly increase the cognitive load on dental providers, making it hard for them to concentrate on complex procedures. Frequent interruptions also disrupt the workflow in general, leading to delays in treatment, which can reduce the overall throughput of a clinic. Unfortunately, there is no comprehensive approach to collectively (i) analyze interruptions in dental healthcare, (ii) design an intervention, and (iii) implement and sustain it. This research proposes a comprehensive …

Reduction Of The Length Of Stay At The Emergency Department Of The Audie L. Murphy Hospital, Arwa Al Shikrian

Theses

We implemented the DMAIC framework (Define, Measure, Analyze, Improve, and Control) and Lean Six Sigma methods to reduce the length of stay (LOS) in the Emergency Department (ED) at Audie L. Murphy VA Hospital, a crucial issue affecting operational efficiency and patient care quality. This project was conducted in conjunction with an internship at the Hospital; our efforts were an integral part of a Green Belt project being conducted by Mr. Roarke Verkaik-Bushby, Hospital Administration Service, to

whom this author reported.

We employed quantitative research design, meticulously observing, measuring, and analyzing ED processes. We tracked patient flow, identified bottlenecks, and …

Comparing North American Professional Sports League Season Formats Using Monte Carlo Simulation, Lathan Gregg

Industrial Engineering Undergraduate Honors Theses

Each NFL, NBA, and MLB season consists of a regular season, in which teams play a set number of scheduled games and a playoff, in which qualifying teams compete for a championship. At the conclusion of each season, teams are ranked based on their performance throughout the season. This study aims to investigate the ability of each league's season format to accurately rank teams using Monte Carlo simulation. Matches between two teams are simulated by using the team’s assigned strength ranks to calculate a winning probability for each team. The winning probabilities are simulated with different skill values, dictating how …

Using Convolutional Neural Networks For Autonomous Drone Navigation, Joshua Jowers

Industrial Engineering Undergraduate Honors Theses

Unmanned Aerial Vehicles (UAVs), more commonly known as drones, serve various purposes, notably in military applications. Consequently, there arises a need for navigation methods impervious to intercepted signals [1]. Previous research has explored numerous solutions, including machine learning. This paper delves into a specific machine learning approach employing a Convolutional Neural Network (CNN) to discern image locations [2]. It elucidates the conversion of a CNN model between two machine learning libraries and presents results from multiple experiments examining parameters and factors influencing the approach's efficacy. These experiments encompass testing different data sources, image quantities, and processing pipelines to gauge their …

Great South Metals: Slitter Head Building Process, Nabhan Karim, Evan Swierski, Raven Morin, Patrick Kelsey, Michael Williams

Senior Design Project For Engineers

Great South Metals (GSM) operates two steel slitter machines, which take large coils of flat rolled steel and cut them into smaller strips for use in customers’ applications. Setting up the working components of each machine, called the slitter head, is a precise and arduous task. This system relies on several manually performed calculations and acute attention to detail; and thus, is prone to human error. The management at GSM commissioned our team to simplify the slitter head assembly process by creating an automated computer program and make additional recommendations to improve their operations.

The program we created is a …

Rsm For The Optimization Of Selective Laser Melting Process Parameters For Manufacturing Initial Layers Of Horizontal Overhang Structures, Prince Yaw Asamani

Theses and Dissertations

While prevalent in 3D printed objects, overhang features are difficult to print with selective laser melting due to the limitation of a purely vertical laser. To address this issue, overhang features are typically built on temporary supports, which are removed following printing. However, this results in wasted material and longer production time. Several authors have studied printing overhangs without support structures. However, there has not been a systematic approach to studying the effect of multiple process parameters on the quality of a printed overhang. This thesis investigates the effect of laser power, scanning speed, and hatch distance on the surface …

A Dedicated Lane Analysis For Supply Chain Resilience In The U.S.-Mexico Border: Cost-Comparison And Simulation Models, Carlo A. Zorola Gonzalez

Theses and Dissertations

Supply chains have been actively developing and implementing strategies to enhance resilience in response to various disruptive events like the COVID-19 pandemic, hurricanes, geopolitical tensions, and climate change. These strategies aim to address demand and supply imbalances, logistical challenges, and policy restrictions encountered in transborder commerce. One area significantly impacted by such disruptions is cross-border trade between the US and Mexico. Understanding these strategies is crucial for achieving supply chain resilience, defined as the ability of a supply chain to quickly adapt to sudden disruptions without affecting the flow of goods. In both the US-Mexico and US-Canada borders …

Energy Optimization In Pneumatic Systems Using Ens-200 Energy Saving Trainer, Maha Guru Shankar Perumal

Open Access Theses & Dissertations

Various industries such as manufacturing and assembly, the automotive sector, printing and paper handling, packaging, aerospace, etc., widely use pneumatic systems for a variety of operations. Enterprises use pneumatic systems for cost-effectiveness, reliability, and simplicity. However, they also have certain inefficiencies, leading to high operating costs and reduced efficiency in various applications. The focus of this research is on energy optimization in pneumatic systems to improve efficiency in industrial applications, minimize energy waste, and reduce operational costs. The best practices for enhancing energy efficiency in pneumatic systems were proper system design, pressure regulation, leak detection and repair, energy-efficient components, and …

Application Of An Information Gain Model In A Motor Learning Task: An Application In A Laparoscopic Surgical Skills Task, Matthew Ball

All Theses

Psychomotor skills are comprised of physical movements and mental adaptations of movements to complete a task, generally using complex tools or components. Laparoscopic surgery training tasks are a prime example of tasks requiring psychomotor skills due to their demand for both fine hand movements and constant mental adaptation to the changing environment of the human body. A typical evaluation of these skills can be accomplished using learning curves, a graphical representation of skill growth in which a performance metric is plotted over a time experience metric. Previously, in the literature, several learning curves have been generated from the performance within …

Modeling Of Multi-Period Disaster Logistics Planning In The State Of South Carolina, Emma Simon

All Theses

South Carolina is one of the most vulnerable states in the United States to the impact of hurricanes. Currently, when threatened with a natural disaster such as a hurricane, the state government makes many vital decisions based on knowledge and experience. In this study, the distribution of disaster relief commodities to meet immediate needs is analyzed through two models for the case of South Carolina to generate an optimal logistics strategy that considers the social vulnerability of affected populations. The first model is a multi-objective pre-disaster logistics model that uses a four-index formulation for the multiple trip vehicle routing problem. …

Depression And Anxiety: Investigating The Impacts Of Scheduling On The Mental Health Of Healthcare Workers During The Covid-19 Pandemic, Christofer Gonzaga

All Theses

Depression is a growing problem in the United States and has ballooned into a globally recognized mental health issue that affects shift workers in various fields (Lee et al., 2017). Rates of depression and anxiety have been shown to be substantially increasing and the COVID-19 pandemic amplified this prevalence of depression and anxiety. In the United States, the prevalence of depression symptoms was more than 3- fold higher during COVID-19 compared to before the pandemic (Ettman et al., 2020). The delivery of healthcare services is an ongoing and dynamic process, requiring clinicians to work in various shifts to ensure the …

Production Of Biofertilizer From Fruit And Garden Waste, Neema Msuya

Tanzania Journal of Engineering and Technology (TJET)

The project focused on the production of bio-fertilizer from fruit and garden waste, with a specific emphasis on utilizing pineapple tops in the composting process. The objective was to produce and assess the properties of the bio fertilizer obtained from this process and evaluate its potential application in agriculture. In this study, the composting process was done in a 0.7 m long, 0.85 wide and 1.1 m high vessel, and 0.238 m3 pineapple top wastes, resulting in 0.35 m3 of biofertilizer. The bio fertilizer produced exhibited favorable characteristics, including a moisture content of 36%, pH of 7.1, and a total …

Assessment Of Risk Factors Related To Body Pain Complaints In Tanzania Construction Industry, Fatma K. Mohamed

Tanzania Journal of Engineering and Technology (TJET)

The construction industry is associated with risks that can result in musculoskeletal diseases. Although young male workers who are presumed to be healthy dominate the industry in Tanzania, body pain complaints have been widely reported. The aim of this study is to assess the prevalence and causes of body pains in workers. A cross-sectional study involving 396 workers was conducted. A chi square test was used for testing association of independent categorical variables and binary logistic regression analysis was used to determine predictors for body pain complaints. The results show that all study participants complained of at least one form …

Modernization Of Water Flow Measurement In Open Irrigation Systems Using The Slope-Area Method, R.M. Aliev, Djalilov Anvar

Chemical Technology, Control and Management

This article describes two methods for determining water flow in open irrigation systems: “speed - area” and “slope - area”. The authors considered the problem of its modernization using the existing method for determining water flow “slope - area” in open irrigation systems. The essence of the issue is the remote transfer of parameters necessary for calculating water flow in open irrigation systems and improving the means of their processing. In scientific studies conducted by the authors, the required hydraulic parameters were studied using the “slope - area” and “speed - area” water flow methods. Based on experimentally obtained data, …

Mathematical Modeling For Dental Decay Prevention In Children And Adolescents, Mahdiyeh Soltaninejad

Dissertations

The high prevalence of dental caries among children and adolescents, especially those from lower socio-economic backgrounds, is a significant nationwide health concern. Early prevention, such as dental sealants and fluoride varnish (FV), is essential, but access to this care remains limited and disparate. In this research, a national dataset is utilized to assess sealants' reach and effectiveness in preventing tooth decay, particularly focusing on 2nd molars that emerge during early adolescence, a current gap in the knowledge base. FV is recommended to be delivered during medical well-child visits to children who are not seeing a dentist. Challenges and facilitators in …

Kitchen Ergonomics In Health And Healthcare: A Rapid Scoping Review, Haozhi Chen, Nicholas Anton, Richard J. Holden, Denny Yu

Purdue University Libraries Open Access Publishing Fund

Although traditional workplace settings such as hospitals and clinics are well-studied, non-clinical areas like home kitchens, which connect clinical healthcare with the care provided in daily living settings, have received less attention. During the early stages of the global pandemic, there has been an increase in home cooking activities due to widespread isolation and restrictions imposed on dining publicly. Ergonomics is at the intersection between work environments and human task performance, and kitchen ergonomics informs knowledge on effective, safe, and efficient cooking practices while maintaining the desired kitchen functionality. Numerous contributions across various disciplines have added knowledge to the kitchen …

Optimization Of Human Interactions In The College Campus Model Via Simio Integration, Benjamin E. Chaback

Doctoral Dissertations and Master's Theses

College campuses are a significant part of life in some cities. Many students each year attend university, pursuing additional knowledge from faculty members. Both staff and faculty members rely on these students to have successful jobs and to ensure the university functions. Yet recently, more and more students are attending, leading to overcrowding, lower admission rates, and difficulty getting into good programs. Previous work exists on qualitative student affairs and quantitative retention data, yet little on using simulations to model this problem. This work aimed to (a) Determine the ability to successfully model human interactions/people flow on a college campus, …

Advanced Spatio-Temporal Froth Analysis Using Smart Soft Sensors In Mineral Processing, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Oumkeltoum Amar, Mohamed Chekroun, Oussama Hasidi, Oussama Lachihab

Manufacturing & Industrial Engineering Faculty Publications

In the transformative field of mineral processing, the need for innovative technologies to overcome inherent difficulties and a critical shortage of high-quality data is an acute challenge. This study addresses these pressing issues by leveraging advanced spatio-temporal deep learning techniques, specifically Convolutional Long Short-Term Memory (ConvLSTM). Focused on the Zinc flotation circuit at CMG Managem Group in Morocco, our comprehensive approach encompasses meticulous data collection from a real-world industrial setting, rigorous spatial and temporal analyses, practical and accurate data augmentation, and the development of a ConvLSTM model for precise prediction of mineral grades. By capturing the temporal intricacies of froth …

Routing Problems Through The Lens Of Hybrid Algorithms, Sasan Mahmoudinazlou

USF Tampa Graduate Theses and Dissertations

This dissertation explores novel approaches to address complex combinatorial optimization challenges in transportation and routing scenarios. Three sets of contributions are presented, each encapsulated in a chapter. The first set of contributions introduces a pioneering hybrid genetic algorithm meticulously crafted to address the intricacies of the Traveling Salesman Problem with Drone (TSPD) and the Flying Sidekick Traveling Salesman Problem (FSTSP). These emerging problems involve the strategic use of both ground-based trucks and aerial drones for efficient package delivery. Our algorithm stands out by leveraging sophisticated chromosomes and dynamic programming, allowing for broad exploration by the genetic algorithm and effective exploitation …

How Individuals’ Opinions Influence Society’S Resistance To Epidemics: An Agent-Based Model Approach, Geonsik Yu, Michael Garee, Mario Ventresca, Yuehwern Yih

Purdue University Libraries Open Access Publishing Fund

Background

Protecting public health from infectious diseases often relies on the cooperation of citizens, especially when self-care interventions are the only viable tools for disease mitigation. Accordingly, social aspects related to public opinion have been studied in the context of the recent COVID-19 pandemic. However, a comprehensive understanding of the effects of opinion-related factors on disease spread still requires further exploration.

Methods

We propose an agent-based simulation framework incorporating opinion dynamics within an epidemic model based on the assumption that mass media channels play a leading role in opinion dynamics. The model simulates how opinions about preventive interventions change over …

Automated Image Registration For Titanium Aircraft Components Via Resolution-Robust Parallel Neural Networks, Paige T. Luebbering

Theses and Dissertations

Titanium alloys are vital to the structural integrity of military and commercial aircraft, comprising numerous critical components. These components are composed of microtexture regions (MTRs) that, at a specific size and orientation, can lead to aircraft failure. Existing MTR testing methods, such as Electron Backscatter Diffraction, often fall short in effectively detecting these MTRs without causing damage to the component. Addressing this gap, this thesis develops a Parallel Convolutional Neural Network (CNN) model tailored for multi-resolution image registration of Polarized Light Microscopy (PLM) images to enhance MTR identification in a non-invasive manner. The findings reveal a significant enhancement in the …

Hybrid Features Extraction For The Online Mineral Grades Determination In The Flotation Froth Using Deep Learning, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Abderrahmane Benhayoun, Oumkeltoum Amar, François Bourzeix, Karim Baïna, Mouhamed Cherkaoui, Oussama Hasidi

Manufacturing & Industrial Engineering Faculty Publications

The control of the froth flotation process in the mineral industry is a challenging task due to its multiple impacting parameters. Accurate and convenient examination of the concentrate grade is a crucial step in realizing effective and real-time control of the flotation process. The goal of this study is to employ image processing techniques and CNN-based features extraction combined with machine learning and deep learning to predict the elemental composition of minerals in the flotation froth. A real world dataset has been collected and preprocessed from a differential flotation circuit at the industrial flotation site based in Guemassa, Morocco. …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Evaluation Of Environmental Management System For Small And Medium Enterprises In Dar Es Salaam, Tanzania, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

A system that manages environmental issues of Small and Medium Enterprises (SMEs) from the time of acquisition of raw materials up to disposal of the product is not well clear, especially in Tanzania. Most of the studies have been conducted in the field of environment management but few of them address the evaluation of the management of SMEs activities with respect to the environment. Although the nature of activities of SMEs has little noticeable environmental implications at the individual level but the impact is large due to diversification and labour intensity of these SMEs. SMEs employ about 20% of the …

A Two-Stage Based Life Cycle And Principal Component Analysis For Decision Support Of Potential Municipal Solid Wastes Management Scenarios, Case Study Dar Es Salaam, Tanzania, Edwin Richard Ndibalema Dr

Tanzania Journal of Engineering and Technology (TJET)

In most of the urban areas of Tanzania, poor and inadequate solid waste management is a growing environmental and public health concern. Despite an array of solid waste management options, choosing an appropriate one remains a challenge. This study applied a novel two-stage-based approach to assess the environmental impacts and sustainability performance of the 27 scenarios for municipal solid wastes (MSW) management of Dar es Salaam City, Tanzania. In the first stage, the study utilized a life cycle analysis (LCA) to quantify the environmental impacts of MSW scenarios. In the second stage, the study used the principal component analysis (PCA) …

Augmented Finite Control Set Mpc Design Technique For Wide Speed Range Control Of Permanent Magnet Synchronous Motor Drives, Francis Mwasilu

Tanzania Journal of Engineering and Technology (TJET)

The effective motion control task is highly influencing the final drive performance in wide-range motor drives applications such as electric vehicles (EVs), washing machines, compressors, elevators and lathe machines. Recently, permanent magnet synchronous motor (PMSM) drive has been widely employed in these applications to achieve desired performances such as high efficiency, high torque requirements with minimum size “occupancy”. The PMSM drive features combining with these modern drive applications are highly nonlinear and the desired operation requirements demand high-performance control schemes with fast system response and robustness features. Linear control schemes are usually implemented to drive the PMSM that entail trade …

Nature Of Occupational Incidents Among Roofing Contractors: A Data Mining Approach, Ikechukwu Sylvester Onuchukwu, Pouya Gholizadeh, Genian Liko, Behzad Esmaeili

Purdue University Libraries Open Access Publishing Fund

Given that roofing contractors in the construction industry have the highest fatality rate among specialty contractors, understanding the root cause of incidents among roofers is critical for improving safety outcomes. This study applied frequency analysis and decision tree data-mining techniques to analyze roofers’ fatal and non-fatal accident reports. The frequency analysis yielded insights into the leading cause of accidents, with fall to a lower level (83%) being the highest, followed by incidence sources relating to structures and surfaces (56%). The most common injuries experienced by roofing contractors were fractures (49%) and concussions (15%), especially for events occurring in residential buildings, …

Cost Estimation Proxy Models For Economic Evaluations In Petroleum Projects: A Case Study From The Onshore Gas Field In The Southern Coastal Tanzania Basin, Fulmence Kaborogo

Tanzania Journal of Engineering and Technology (TJET)

Petroleum economic evaluation involves estimating revenues from forecasted production profiles and field costs including capital expenditures (CAPEX), drilling expenses (DRILLEX), and operating expenses (OPEX). The existing cost-estimating tool requires several inputs making it time-intensive and difficult to use with few data during the early stages of projects. Majority of the previously developed time saving cost estimations proxy models rely on unrealistic assumptions that include uniform operational costs for different fields with a different number of wells, casings, and drilled depths. This work focused at developing proxy models that consider the variability of the development costs with different parameters. The developed …