Industrial Engineering Commons^™

Integrating Gis With Interim Payment Valuation In Road Construction Projects: A Conceptual Framework, Abdulrahman I. Iro, Juma M. Matindana, Julian Ijumulana

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Interim Payment Valuation is a critical process in road construction contract administration, yet conventional valuation practices remain heavily dependent on manual measurements, fragmented documentation, spreadsheets, and professional judgement. These limitations can affect measurement accuracy, transparency, traceability, and the timeliness of payment certification. Although Geographic Information Systems have increasingly been applied to construction planning, quantity measurement, progress monitoring, infrastructure management, and decision support, their integration with contractual and financial processes for interim payment valuation remains insufficiently explored. This study therefore develops a conceptual framework for integrating GIS with Interim Payment Valuation in road construction projects. A PRISMA-guided structured literature review …

Voltage-Related Power Quality Issues And Impacts On Distribution Networks With Sensitive Loads - A Review, Godwin Elinazi Mnkeni, Jackson Justo, Aviti Thadei Mushi, Bakari M. M. Mwinyiwiwa

Tanzania Journal of Engineering and Technology (TJET)

Voltage disturbances are the most important power quality (PQ) complications that customers and power utilities face in this smart era. The growing adoption of sophisticated electronic equipment and integration of renewable energy sources (RES) into power grids has increased the susceptibility of power distribution networks (PDNs) to voltage sags, swells, interruptions, flicker, and voltage imbalance. These disturbances, mainly caused by upstream faults, switching operations, and RES integration, compromise voltage PQ and system reliability. Consequently, they accelerate equipment degradation, increase electronic waste (e-waste), raise reactive power demand and maintenance costs, increase power losses, and impose substantial economic losses on customers and …

Decision Support Tool For The Maintenance Of Meter Gauge Railway Permanent-Way Infrastructures: A Concept Paper, Hamisi J. Maulid, Beatus A.T Kundi, Juma M. Matindana, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

A Decision Support Tool (DST) represents a transformative way of modernising maintenance practice on the permanent-way infrastructure of Meter Gauge Railway (MGR). Maintenance practice remains largely reactive, as the MGR plays a strategic role in transporting both freight and passengers, resulting in inefficient resource allocation, high operational risk, and growing Lifecycle expenses. This concept paper explores the potential and the design challenges for a DST that combines fuzzy analytic hierarchy process (Fuzzy-AHP) modelling, multi-criteria decision analysis (MCDA), Geographic Information Systems (GIS) and predictive machine learning (ML) analytics for evidence-based, future-oriented maintenance management. The paper draws on peer-reviewed studies from …

Can Generative Ai Make Farming Decisions? Current Status And Future Pathways: A Case Study In Row Crop Production With Chatgpt, Nipuna Chamara, Yufeng Ge, Joe Luck, Yu Pan, Saleh Taghvaeian, Cory Walters, Christopher Proctor, Daran Rudnick, Daren Redfearn

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The agricultural decision-making process is experience-based, knowledge-dependent, time-sensitive, complex, and driven by historical data. Planting, fertilization, irrigation, and chemigation are key categories in farm decision-making, and currently there is no one-shot decision-support tool that covers all these activities. Generative Artificial Intelligence (AI) models are more advanced than traditional machine learning and deep learning models. These models have been trained on vast amounts of data from the internet, allowing them to accept unstructured data in various forms and generate human-like text, solutions to problems, and scenario predictions. Given this capability, we became interested in exploring the potential of generative AI in …

Bridging Images And Language In Radiology: A Comprehensive Prisma Systematic Review Of Transformer Vision-Language Models And Clinical Readiness, Mohammad T. Khasawneh Dr., Sadaf Tabatabaee

Systems Science and Industrial Engineering Student Scholarship

Transformer vision-language models (VLMs) promise end-to-end automation of radiology reporting and related multimodal tasks. However, evidence remains fragmented across datasets, architectures, evaluation practices, and levels of clinical validation, limiting fair comparison and safe translation into practice. Following PRISMA 2020/PRISMA-S, search engines including PubMed, IEEE Xplore, Web of Science, and Google Scholar were systematically searched for peer-reviewed, English-language studies published between 2019 and 2025 that used paired radiology images and free-text reports. Dual reviewers screened records and extracted data using a locked schema covering datasets, modalities, architectures, training objectives, evaluation metrics, and indicators of clinical readiness. Free-text model descriptions were normalized …

Material Costs, Karima Weinman

Masters Theses

This thesis investigates how migration fatality and disappearance data can be reinterpreted through material craft to create a more reflective encounter with information. Working with the Missing Migrants Project's dataset, this project asks how design can communicate dimensions of human loss that conventional data visualization cannot reach.

The work situates contemporary border violence within a longer colonial history, arguing that the logics of surveillance and quantification that structured European imperial expansion persist in the databases that govern mobility in the Mediterranean today.

Terrazzo is a 15th-century Venetian flooring technique built from discarded fragments bound together into a unified surface. This …

Enhancing Control Charting Schemes And Exploring New Assessment Metrics To Advance Quality Control And Cyber-Attack Detection In Manufacturing, Ahmad Al Majali

Dissertations

The increasing integration of digital technologies and industrial control systems in modern manufacturing has introduced new cybersecurity vulnerabilities within cyber–physical production environments. Malicious actors can exploit these vulnerabilities to induce subtle process deviations that degrade product quality while remaining undetected by conventional statistical monitoring tools. Such attacks can be deliberately engineered to manipulate process behavior through transient shifts that vary in magnitude, duration, and frequency. Despite extensive research on transient shifts caused by assignable causes in Statistical Process Control (SPC), limited attention has been given to intelligently designed cyber–physical attacks that exploit the structural characteristics and limitations of control charting …

A Forecasting Framework For Distribution Center Capacity Utilization: An Applied Industry Study, Jordan J. Shortt

Data Science Undergraduate Honors Theses

This project develops and evaluates a predictive modeling framework for forecasting distribution center capacity utilization at Company Y, with monthly forecast horizons up to one year. Motivated by the operational challenges of seasonal demand volatility, promotional cycles, and the absence of a formally defined capacity metric, the study first constructs a historical capacity utilization measure from raw warehouse management system data — reconciling item volumes, location dimensions, and utilization factors across all DCs — which serves as the target variable for all modeling work. Four models are developed and evaluated against a naïve seasonal baseline: SARIMA, LightGBM, LSTM, and a …

A Study Of Visualized Diagnostics In Early Stage Digital Twin Implementation Of An Industrial Control System, Michael R. Kinzel

All-Inclusive List of Electronic Theses and Dissertations

Industrial Control Systems (ICS) are used for process control in almost all industries. An ICS combines Operational Technologies (OT) with Information Technologies (IT) to allow human supervision of a process through surveillance of process variables and manipulation of controlling elements such as valves to maintain stable process conditions. ICSs have been in-service for several decades and may remain operational past their technological service life. Organizational personnel interact with the ICS through visual displays that both indicate the process variables and also the controlling elements. The Human Machine Interface (HMI) allows visibility of the process and the ability to manipulate controlling …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Generative Ai-Driven Optimization In Flexible And Reconfigurable Manufacturing Systems, Salah Hammedi, Hicham Chaoui, Lotfi Nabli

Electrical & Computer Engineering Faculty Publications

Flexible and Reconfigurable Manufacturing Systems (FRMSs) are essential for coping with variability in modern production environments; however, efficient scheduling and rapid reconfiguration remain challenging. This paper presents a hybrid optimization framework that integrates Colored Petri Net (CPN) modeling with Generative Artificial Intelligence (GenAI) to enhance scheduling performance and system adaptability. The CPN formalism ensures verifiable modeling of system dynamics, while a transformer-based generative model produces candidate scheduling and reconfiguration strategies. Simulation experiments were conducted under static, dynamic, and adaptive scenarios, including machine breakdowns and dynamic job arrivals. Performance was evaluated using makespan, mean flow time, machine utilization, and reconfiguration latency. …

Exploring The Link Between Emotional States And Coding Task Quality: A Pilot Study, Aquib Reshad, Valentina Nino, Maria Valero, Adriane Randolph, Yang Shi

Faculty Articles

Emotions play a crucial role in shaping cognitive performance, yet their influence on programing remains understudied. This pilot study investigates the relationship between emotional states and coding task quality. Ten participants completed a programing task while their brain activity was recorded using electroencephalography (EEG), with frontal alpha asymmetry (FAI) applied as a neural marker of emotional valence. Emotional self-reports were collected using the Scale of Positive and Negative Experience (SPANE), and coding quality was evaluated through a structured rubric. Preliminary findings indicate a potential association between FAI and coding performance, whereas self-reported affect showed weaker or inconsistent patterns. Given the …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania, Fatuma S. Ikuja

Tanzania Journal of Engineering and Technology (TJET)

Industries are the main consumers of products from higher learning institutions (HLIs); graduates for employment and research outputs for socio-economic development. Research outputs from HLIs are commercialized as services or products facilitated by academia-industry collaborations. The collaborations are expected to address mismatch between labour market needs and HLIs’ products, which has resulted in graduates’ employability challenges. Despite their importance, effective academia-industry collaborations remain challenging. This study explores the effectiveness of Academia-Industry collaborations established by HLIs in implementing the Higher Education Economic Transformation (HEET) project (2021-2026) in Tanzania. One of the project objectives is to build functional linkages between industry and …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Assessment Of Digital Solutions For Conformity Assessment Of Legally Controlled Measuring Instruments In Tanzania, Faraja Nyoni

Tanzania Journal of Engineering and Technology (TJET)

The advent of state-of-the-art digital technologies since 2011 has led to the digital transformation of legal metrology practices to ensure the trustworthiness of software-controlled measuring instruments globally. Despite the digital transformation in legal metrological practices, the conformity assessment of legally controlled measuring instruments is manually done (i.e., paper-based) in Tanzania. The paper-based conformity assessment of legally controlled measuring instruments is prone to error and lacks efficiency and effectiveness. This study aimed to assess digital solutions for improving conformity assessment through a comprehensive survey conducted across various regions in Tanzania, targeting a stratified sample of 51 respondents from organizations involved in …

Machine Learning And Optimization For Intelligent Decision-Making, Elson Cibaku

Dissertations

This dissertation presents a series of innovative machine learning and optimization model designs that address complex operational challenges across logistics and power systems. By integrating advanced neural architectures with robust optimization techniques, the work delivers scalable solutions designed to improve efficiency, reliability, and decision-making in dynamic and real-world environments. The first study introduces a two-stage approach to effective vaccine distribution. This framework tackles the capacitated vehicle routing problem by combining adaptive clustering techniques with reinforcement learning and a simulated annealing pickup policy. Through extensive computational experiments, the approach demonstrates substantial improvements in routing efficiency, reducing both computational time and logistical …

Extending Simulation-Enhanced Bayesian Optimization Of System Designs: A Computational Study, Luke Kim

Data Science Undergraduate Honors Theses

This honors thesis builds off work initially accepted for publication in the Proceedings of the 2025 IISE Annual Conference & Expo, which introduced “Simulation-Enhanced Bayesian Optimization” (SEBO)—a hybrid testing optimization approach that combined the usage of unbiased but costly physical experiments with the usage of cheaper but potentially biased computer experiments to optimize engineered systems. The original study established the SEBO methodology and demonstrated its effectiveness on a multimodal, two-dimensional benchmark function. Expanding on the work performed, we conduct a broader evaluation of the SEBO framework through parameter testing and experimentation under a variety of additional benchmark functions. This investigation …

Developing Predictive Mathematical Model For Optimizing Coating Weight Variation In Galvalume Production: A Case Study Of A Metal Industry, Victoria Mahabi

Tanzania Journal of Engineering and Technology (TJET)

Variations in coating weight for galvanized steel sheets can result in notable differences between batches. Such variations may cause various issues, such as diminished corrosion resistance, lower mechanical strength, and visual defects, which can ultimately drive-up costs, lead to customer dissatisfaction, and pose safety risks. Even with attempts to manage elements like air knife pressure and line speed, coating weight inconsistencies remain challenging. The research focuses on developing a predictive mathematical model designed to optimize variations in coating weight during Galvalume production. The critical parameters influencing coating weight variation were identified and analysed using a systematic literature review, primary data …

A Fuzzy Based Framework For Sustainable Technology Selection In Small-Scale Gold Mining Operations, John M. Kafuku

Tanzania Journal of Engineering and Technology (TJET)

Small-scale gold mining (SSGM) operations in Tanzania has been operating inefficiently due to inadequate mining processing technologies, poor working tools, lack of enough capital, and insufficient electricity. Despite the efforts made by different stakeholders in boosting the sustainability of SSGM yet the sector has not reached the expected goal. This paper proposes a framework for appropriate technology selection to help small scale gold miners in evaluating various gold mineral processing technologies. The framework utilizes the fuzzy logic set theory for technology evaluation and selection. The developed framework for technology selection upon validation provided results that technology adequacy of more than …

A Critical Realist Erp Implementation In Zimbabwean Mining Industry Organisations, Jairos Mukwenha

Tanzania Journal of Engineering and Technology (TJET)

This research uses a critical realist framework to examine the factors influencing the success of enterprise resource planning (ERP) system implementation in Zimbabwean mining industry organisations. From the perspective of critical realism, the mining industry in Zimbabwe faces a complex interplay of opportunities and obstacles while implementing ERP systems. The deployment of ERP in mining firms is critically examined in this paper, emphasising how these systems might improve operational efficiency while considering Zimbabwe's particular socioeconomic circumstances. By exploring underlying structures, mechanisms, and outcomes, the research aims to identify critical challenges and opportunities and develop practical recommendations for improving ERP adoption …

Application Of Artificial Neural Network Models For Predicting Diesel And Petrol Prices In The Geographically Sparsed Regions In Tanzania, John M. Kafuku

Tanzania Journal of Engineering and Technology (TJET)

Fuel consumption in Tanzania, mainly diesel and petrol, accounts for 82 percent of the energy consumption in the country, with significant price volatility affecting market stability, availability of fuel, and investment decisions. This study uses an artificial neural network (ANN) with a backpropagating algorithm to predict fuel prices in four regions of Tanzania. Key input parameters include the currency inflation rate (CIR), the petrol fuel inventory (PFI), the diesel fuel inventory (DFI), and the fuel transport costs (FTC). The study selected the 6-10-10-2 ANN structures for Sumbawanga-Rukwa, Mpanda-Katavi, and Mbeya-Mbeya as well as 6-10-9-2 for the Songea-Ruvuma region. The results …

Digital Thread: Bridging Macro–Micro Services In System-Of-Systems, Joshit Mohanty

Graduate Student Government Association Research Conference

Organizations and industries increasingly rely on distributed services in decentralized environments—ranging from large-scale, system-of-system architectures to fine-grained, agent-based microservices. While this distributed paradigm offers flexibility and innovation, it presents critical challenges such as interoperability gaps, inconsistent data formats, and a lack of holistic oversight. Traditional integration approaches, including ad-hoc middleware or enterprise service buses, tend to solve these issues reactively. As a result, technical debt accumulates, stakeholder misalignments persist, and scaling to new demands becomes complex.

This research proposes digital thread (DT) as the unifying framework to create an authoritative source of truth: a continuous flow of information across the …

A Human-In-The-Loop Framework For Scalable And Interpretable Event Triaging In Large-Scale Systems, Ibrahim Khaled Al-Agha

Doctoral Dissertations

This dissertation presents a comprehensive and scalable framework for real-time fault detection and event triage in industrial systems, addressing critical challenges such as class imbalance, ambiguous feature boundaries, and the prioritization of complex, high-dimensional event data. The proposed framework integrates advanced methodologies, including micro-batch processing, retrospective divergence-based event detection (DB-RED), association rule mining (ARM), clustering, and Dempster-Shafer Theory (DST) for conflict resolution. Together, these components enable the systematic stratification of events into actionable priority levels, ensuring robust and interpretable decision-making in real-time environments. DB-RED forms the cornerstone of the framework, leveraging KL-divergence and PE-divergence metrics to detect subtle and transient …

Optimized Hiv/Aids Resource Allocation In Ohio: A Linear Programming Approach, Godfred Ahenkroa Kesse

Data Science and Data Mining

This study employs a linear and integer programming approach to optimize HIV resource allocation in Ohio, aiming to minimize new infections and enhance the impact of limited resources. With the advances in HIV prevention and treatment, Ohio faces challenges in addressing disparities in access to healthcare, particularly among high-risk populations. The proposed model integrates data on infection rates, transmission patterns, demographic factors, and cost-effectiveness to provide a decision-support framework for policymakers. Using epidemiological data and equity constraints, the model prioritizes high-risk regions and populations while ensuring fair resource distribution. Results indicate that increased funding allocations significantly enhance the potential to …

A Comparative Analysis Of Preprocessing Filters For Deep Learning-Based Equipment Power Efficiency Classification And Prediction Models, Sang-Ha Sung, Chang-Sung Seo, Michael Pokojovy, Sangjin Kim

Mathematics & Statistics Faculty Publications

The quality of input data is critical to the performance of time-series classification models, particularly in the domain for industrial sensor data where noise and anomalies are frequent. This study investigates how various filtering-based preprocessing techniques impact the accuracy and robustness of a Transformer model that predicts power efficiency states (Normal, Caution, Warning) from minute-level IIoT sensor data. We evaluated five techniques: a baseline, Simple Moving Average, Median filter, Hampel filter, and Kalman filter. For each technique, we conducted systematic experiments across time windows (360 and 720 min) that reflect real-world industrial inspection cycles, along with five prediction offsets (up …