Industrial Engineering Commons^™

Group Facilitation, Terry Bresnick

Operations Management Presentations

As a management consultant, over the course of more than 40 years, I have facilitated more than 1500 workshops, seminars, and decision conferences. But when I think back on the times I was a college professor at West Point in the 70s, I often found myself in a position where in addition to teaching, I had to bring together and integrate the needs of very diverse groups of people. Typically, there was time pressure, the stakes were high, and the objectives of the participants conflicted. As an assistant professor, I had no real decision-making authority, but I could help the …

Budget-Constrained Regression Model Selection Using Mixed Integer Nonlinear Programming, Jingying Zhang

Graduate Theses and Dissertations

Regression analysis fits predictive models to data on a response variable and corresponding values for a set of explanatory variables. Often data on the explanatory variables come at a cost from commercial databases, so the available budget may limit which ones are used in the final model.

In this dissertation, two budget-constrained regression models are proposed for continuous and categorical variables respectively using Mixed Integer Nonlinear Programming (MINLP) to choose the explanatory variables to be included in solutions. First, we propose a budget-constrained linear regression model for continuous response variables. Properties such as solvability and global optimality of the proposed …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

Global Renewable And Nonrenewable Energy Use Impact Assessment Of U.S. Manufacturing: An Integrated Cradle-To-Gate Lca And Dea Approach, Bahadir Ezici

Master's Theses

In this thesis, U.S. manufacturing industries` global supply chain-linked energy use and economic output are investigated considering a total of 16 renewable and nonrenewable energy carriers. A multiregion input output (MRIO) framework is employed to conduct the global supply chain-linked energy use impact assessment. The study period was between 1995 and 2014 based on data availability. Thus, 20 MRIO models were developed. Each MRIO model consists of the 40 largest economies of the world and the rest of the world (ROW) as the 41st country. Each country’s economy was structured into 35 manufacturing and service industries based on the Worth …

Midpoint And Endpoint Sustainability Assessment Of U.S. And China Manufacturing: A Comparative Mrio+Recipe Analysis, Mustafa Saber

Master's Theses

Manufacturing is among the most important industries for an economy, which creates value-added, fosters innovation, stimulates employment and economic growth. Therefore, manufacturing industries are crucial for a country’s sustainable development not only for economic reasons but also for social (.e.g. employment, tax, etc.) and environmental ones. Thus, manufacturing activities’ contribution to the economy is critically related with environmental and social impacts. Sustainable economic growth is essential and necessary for a country to provide all necessary goods and services to its growing population.

And, this is highly linke with the creation of new jobs and in this context, manufacturing jobs have …

Introduction To Data Analytics And Emerging Real-World Use Cases, Art Chaovalitwongse

Operations Management Presentations

Data analytics is a rapidly emerging interdisciplinary research area that involves advances in engineering, computer science, statistics and operations research. This webinar is focused on introducing the foundation of data analytics and emerging real-world use cases of data analytics. This presentation will begin with a discussion of the mathematical and statistical modeling aspects of various levels of data analytics (i.e., descriptive, predictive and prescriptive). In this webinar, you will hear an overview of data analytics in real world problems ranging from healthcare analytics, retail analytics and financial analytics.

Smart Disease Prevention App: Informing The Public In Their Own Geographic Location, Apoorva Sulakhe, Shafali Rana, Zoe Disori, William Nogay, Kyle Plummer, Meredith Shannon, Morgan Young, Alyssa Zielinski, Vincent G. Duffy

Purdue Journal of Service-Learning and International Engagement

Apoorva Sulakhe and Shefali Rana are graduate students in the School of Industrial Engineering at Purdue. They have both been teaching assistants under their coauthor, Dr. Vincent Duffy, while supervising multiple projects. Coauthors Zoe Disori, William Nogay, Kyle Plummer, Meredith Shannon, Morgan Young, and Alyssa Zielinski are listed in alphabetical order. They were all seniors in School of Industrial Engineering at the time of this project in 2017. The purpose of their study, described in this article, was to develop an application to provide users with accurate information about diseases spreading in their geographic locations.

Characterizing Interfacial Bonds In Hybrid Metal Am Structures, John Ross Linn

Theses and Dissertations

The capabilities of various metal Additive Manufacturing (AM) processes, such as Powder Bed Fusion – Laser (PBF-L) and Direct Energy Deposition (DED) are increasing such that it is becoming ever more common to use them in industrial applications. The ability to print atop a substrate broadens that scope of applications. There is ongoing research regarding the mechanical properties of additively processed materials, but little regarding the interaction between additive material and its substrate. An understanding of the mechanical and performance properties of the AM/substrate interface is imperative. This paper describes a study of the strength properties of AM/substrate interfaces, with …

Statistical Monitoring Of Queuing Networks, Yaren Bilge Kaya

USF Tampa Graduate Theses and Dissertations

Queuing systems are important parts of our daily lives and to keep their operations at an efficient level they need to be monitored by using queuing Performance Metrics, such as average queue lengths and average waiting times. On the other hand queue lengths and waiting times are generally random variables and their distributions depend on different properties like arrival rates, service times, number of servers. We focused on detecting the change in service rates in this report. Therefore, we monitored queues by using Cumulative Sum(CUSUM) charts based on likelihood ratios and compared the Average Run Length values of different service …

Stop “Droning” On About Unmanned Aircraft Systems And Do Something About It, Richard Ham

Operations Management Presentations

The use of Unmanned Aircraft Systems (UAS) is quickly becoming an expectation for inventory management, supply chain, engineering/construction and architectural inspections, agriculture assessment and surveillance. This webinar will provide an overview of compliance requirements, startup costs, and new use cases changing the way operations managers function and improve efficiency. Supply chain management and delivery, construction management, quality management inspections and homeland security requirements are already heavily invested in UAS integration. Learn how to use your knowledge as an operations manager to stay ahead of your competitors and discover creative ways to drive up productivity and reduce costs by adding UAS …

Using Value Modeling And Design Structure Matrices For The Nasa Marsbee Project, Shahrom S. Doneshwar, Giulia E. Palma

Von Braun Symposium Student Posters

No abstract provided.

Embedding Sustainability In Lean Six Sigma Efforts, Nadiye O. Erdil, Can B. Aktas, Omid M. Arani

Mechanical and Industrial Engineering Faculty Publications

The emphasis on the concept of sustainability in businesses and operations is growing either due to increasing public interest, regulatory pressures, or corporate social responsibility. However, where and how to integrate sustainability needs further development for broadening its applications. Using Lean and Six Sigma (LSS) principles in sustainability studies is becoming popular in research and practice. The common approach in these studies is to identify a sustainability project followed by current state sustainability performance assessment, and then work towards improving sustainability performance using LSS tools. The goal of this study was to develop a model framework to fully embed sustainability …

Identifying Key Factors Associated With High Risk Asthma Patients To Reduce The Cost Of Health Resources Utilization, Amani Ahmad

LSU Master's Theses

Asthma is associated with frequent use of primary health services and places a burden on the United States economy. Identifying key factors associated with increased cost of asthma is an essential step to improve practices of asthma management.

The aim of this study was to identify factors associated with over utilization of primary health services and increased cost via claims data and to explore the effectiveness of case management program in reducing overall asthma related cost.

Claims data analysis for Medicaid insured asthma patients in Louisiana was conducted. Asthma patients were identified using their ICD-9 and ICD-10 codes, forward variable …

Evaluating The Effect Of Shear Stress On Graft-To Zwitterionic Polycarboxybetaine Coating Stability Using A Flow Cell, Andrew Belanger, Andre Decarmine, Shaoyi Jiang, Keith Cook, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

The effect of surface coatings on the performance of antifouling activity under flow can be influenced by the flow/coating interactions. This study evaluates the effect of surface coatings on antifouling activity under different flows for the analyses of coating stability. This was done by exposing DOPA-PCB-300/dopamine coated polydimethylsiloxane (PDMS) to physiological shear stresses using a recirculation system which consisted of dual chamber acrylic flow cells, tygon tubing, flow probe and meter, and perfusion pumps. The effect of shear stress induced by phosphate buffered saline flow on coating stability was characterized with differences in fibrinogen adsorption between control (coated PDMS not …

Impact Of Communication Latency On The Bus Voltage Of Centrally Controlled Dc Microgrid During Islanding, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Maintaining a sustainable and reliable source of energy to supply critical loads within a renewable energy based microgrid (MG) during blackouts is directly related to its bus voltage variations. For example, voltage variation might trigger protection devices and disconnect DERs within the MG. Centrally controlled MGs (CCMGs) type is dependent on communication. Therefore, it is very important to analyze the impact of communication networks performance degradation, such as latency, on the bus voltage of CCMGs. This paper investigates the effect of wireless communication technologies latency on the bus voltage and performance of centralized DC MGs. Two mathematical models were developed …

Maximizing Financial Benefit Of Lean Six Sigma Projects Through Optimized Selection Criteria, Colin Wasiloff

Operations Research and Engineering Management Theses and Dissertations

As evolving threats across the globe keep pace with increasing budget constraints, the US Army’s major subordinate commands and their sub-organizations are constantly challenged to do more with less. Resources such as human capital, information technology, facilities, and budgeted funding are stretched as thin as ever, while requirements to serve the Warfighter remain paramount. Each dollar of financial benefit gained through cost reduction efforts at the US Army can affect the Warfighter directly. Budgeted money saved or avoided is reprogrammed both locally and atop the hierarchy at the Department of Treasury to serve the Warfighter better.

Ordinal Logistic Regression was …

Leading Through Change, Travis Mcneal

Operations Management Presentations

In this webinar, you will learn how to leverage periods of change to develop better leaders. We all hear that "the only constant is change" and that "change is hard." What if there was a different narrative? What if organizations going through change actually resulted in higher performance, engagement and better leadership? It is widely known that effective change management requires sponsorship — this means every leader, from the C-Suite to the front-line supervisor. This webinar will share practical and repeatable ways to help all leaders improve the way they lead change.

Modular Crates – A Holistic Design Approach For Optimizing Cube Size In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Global market is a field where all industries strive to provide personalized product for every customer demand in order to compete with their competitors in the business battlefield. Product personalization varies with customer to customer which increases the product variety. When the product size variability is vast, producing packages for every individual product is not only difficult but also increases the design time, production time, total manufacturing cost and inventory cost. For the present scenario, Industrial packages does not opt customizability for variable product sizes. Customized package for personalized product is achievable only by redesigning the existing distribution package with …

Presenting To Senior Decision Makers: Clear, Concise & Complete, Kirk Michealson

Operations Management Presentations

Your manager just assigned you to lead a new project for your Vice President. You have many questions! What are the details of the project? What does the VP want to see in briefings? Does the VP have an advocate for pre-briefs? What information is important to include in the presentation? How detailed should the information be? How should the information be presented? Are there any best practices in developing presentations? In this webinar, you will learn strategies for sharing important information with key stakeholders in your career – and how to actually get them to listen!

The Effect Of Rest Period On Fatigue Using Electromyography During Manual Lifting, Nandakumar Prabhakar

LSU Master's Theses

Manual materials handing (MMH) is the main cause and concern for injuries in the working population which lead to musculoskeletal disorders (MSDs). MSDs significantly contribute to the cost of workers’ compensation and loss of productivity, thus impacting economy of the United States. MSDs are mainly caused due to over exertion and fatigue experienced by workers involved in manual materials handling. In addition to over-exertion and fatigue, lack of short and frequent rest intervals between tasks contributes to the risk of MSDs. The objective of this research was to study the effect of rest period on muscle fatigue using electromyography (EMG) …

Robust Allocation Of Funds For Nonstructural Flood Risk Mitigation In Coastal Louisiana, Simón Gómez Sierra, David R. Johnson, Matthew P. Shisler, Zachariah T. Richardson

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coastal Louisiana is a critical economic, ecological and cultural asset, acting as a major hub for waterborne commerce, fisheries, and the petrochemical industry, and also as one of the world’s unique wetlands. Unfortunately, this rich environment is in great danger from the threat of hurricanes and storm surge flooding. Direct economic losses are estimated to average $2.7 billion per year under current conditions, and this could increase to $12 billion a year, or more, within 50 years if nothing is done. To prevent this catastrophe, Louisiana has developed a Comprehensive Master Plan for a Sustainable Coast, which plans to spend …

Efvs Effects On Pilot Performance, Michael Campbell, Nsikak Udo-Imeh, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

Flight tests have been conducted at Purdue University using a computer-based flying simulator in an attempt to determine and measure the effects of Enhanced Flight Vision Systems (EFVS) on the performance of pilots during landing. Knowledge of these effects could help guide future design and implementation of EFVS in modern commercial aircraft, and further increase pilots’ ability to control the aircraft in low-visibility conditions. The problem that has faced researchers in the past has revolved around the difficulty in interpreting the data which is generated by these tests. The difficulty in making a generalized conclusion based on the large amount …

Economic Model Predictive Control Design Via Nonlinear Model Identification, Laura Giuliani, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Increasing pushes toward next-generation/smart manufacturing motivate the development of economic model predictive control (EMPC) designs which can be practically deployed. For EMPC, the constraints, objective function, and accuracy of the state predictions would benefit from process models that describe the process physics. However, obtaining first- principles models of chemical process systems can be time-consuming or challenging such that it is preferable to develop physics-based process models automatically from process operating data. In this work, we take initial steps in this direction by suggesting that because experiments that are used to characterize first-principles models often target specific types of data, an …

Feature-Based Discretization Of A Turbine Disk For Probabilistic Risk Assessment, Michael Thomas, Jace Carter, Lloyd Matson, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

There is an economic need to extend the useful life of jet engine rotors. Retirement-for-Cause (RFC) is a lifing method that allows for the continued operation of components passed traditional life limits. Under RFC, an extension of damage tolerance, components are deemed safe for a further service interval using non-destructive inspections (NDI) for crack like defe cts. As components are kept in-service beyond their designed service life it is essential that the probability of failure (POF), or risk, of continued service is known. Under current FAA rotor design certification practices the component POF is analyzed using a probabilistic framework focused …

Modeling The Innovation Ecosystem And Development Of A Dynamic Innovation Index, Henriette Schoen

Electronic Theses and Dissertations

The topic of innovation currently generates a tremendous amount of interest around the world. Innovation is considered an essential part of the solution to creating more jobs and improving the socio-economic conditions of many countries around the globe. Innovation comes about through the existence of many interrelated solutions to socio-economic problems in an extensively interconnected network, which create value for each other. Such a complex creativity and innovation value-creating network is here called an Innovation Ecosystem (IE). The main objective of this dissertation research is to improve the current understanding of the IE by developing a simulation model that uses …

Methods For Online Feature Selection For Classification Problems, Alaleh Razmjoo

Electronic Theses and Dissertations

Online learning is a growing branch of machine learning which allows all traditional data mining techniques to be applied on an online stream of data in real-time. In this dissertation, we present three efficient algorithms for feature ranking in online classification problems. Each of the methods are tailored to work well with different types of classification tasks and have different advantages. The reason for this variety of algorithms is that like other machine learning solutions, there is usually no algorithm which works well for all types of tasks. The first method, is an online sensitivity based feature ranking (SFR) which …

Binder Jetting Additive Manufacturing Process Fundamentals And The Resultant Influences On Part Quality., Hadi Miyanaji

Electronic Theses and Dissertations

Binder jetting additive manufacturing (BJ-AM) technology is a process by which a part is fabricated layer by layer through depositing liquid binder in the designated regions of each layer until the feature is complete. Due to the use of binder in geometry generation, this process possesses various advantages over the other additive manufacturing technologies including the ability to create colored objects via colored binders, lower cost, lack of heat-induced defects, and its potential capability to print a variety of materials such as metals, sands and ceramics. Although the application of the binder jetting process has been recently reported by different …

Modeling And Solution Approaches For Non-Traditional Network Flow Problems With Complicating Constraints, Negin Enayaty Ahangar

Graduate Theses and Dissertations

In this dissertation, we model three network-based optimization problems. Chapter 2 addresses the question of what the operation plan should be for interdependent infrastructure systems in resource-constrained environments so that they collectively operate at the highest level. We develop a network-based operation model of these systems that accounts for interdependencies among them. To solve this large-scale model, a solution approach is proposed that relatively quickly generates high-quality solutions to the problem.

Chapter 3 presents a routing model for a single train within a railyard with the objective of minimizing the total length traveled by train. The difference between this problem …

Configuring Traditional Multi-Dock, Unit-Load Warehouses, Mahmut Tutam

Graduate Theses and Dissertations

The development of expected-distance formulas for multi-dock-door, unit-load warehouse configurations is the focus of the dissertation. From formulations derived, the width-to-depth ratios minimizing expected distances are obtained for rectangle-shaped, unit-load warehouse configurations. Partitioning the storage region in the warehouse into three classes, the performance of a multi-dock-door, unit-load warehouse is studied when storage regions can be either rectangle-shaped or contour-line-shaped. Our first contribution is the development of formulas for expected distance traveled in storing and retrieving unit loads in a rectangle-shaped warehouse having multiple dock doors along one warehouse wall and storage racks aligned perpendicular to that wall. Two formulations …

Barge Prioritization, Assignment, And Scheduling During Inland Waterway Disruption Responses, Liliana Delgado-Hidalgo

Graduate Theses and Dissertations

Inland waterways face natural and man-made disruptions that may affect navigation and infrastructure operations leading to barge traffic disruptions and economic losses. This dissertation investigates inland waterway disruption responses to intelligently redirect disrupted barges to inland terminals and prioritize offloading while minimizing total cargo value loss. This problem is known in the literature as the cargo prioritization and terminal allocation problem (CPTAP). A previous study formulated the CPTAP as a non-linear integer programming (NLIP) model solved with a genetic algorithm (GA) approach. This dissertation contributes three new and improved approaches to solve the CPTAP.

The first approach is a decomposition …