Industrial Engineering Commons^™

A Causal Inference Methodology For Root-Cause Diagnosis In Nonstationary Industrial Time Series, Cansu Yalim

Knowledge and Creativity Expo

Industrial fault diagnosis lacks a procedure that learns time-varying causal structure from observational time series, makes identifiability limits explicit, and uses intervention-based reasoning to support root-cause assessment under industrial constraints. Although predictive maintenance can reduce downtime, diagnosis is often expert-rule-based or association-driven; pipelines may elevate downstream symptoms alongside true drivers and provide limited guidance on which feasible action would change a fault trajectory under current operating conditions. Because operating phases and fault progression create regime shifts, industrial systems rarely follow a single stable mechanism. This study develops and evaluates a three-stage, regime-aware causal diagnostic protocol based on a time-varying Dynamic …

Bridging Mission And Execution: Integrating Participatory Design In Early-Phase Mission Engineering For Stakeholder Alignment And Mission Clarity, Rafi Soule

Knowledge and Creativity Expo

This research examines mission framing during the early phase of Mission Engineering. Stakeholder interpretations diverge under ambiguity. Interoperability constraints are often not surfaced early. These conditions reduce mission clarity and weaken mission-to-system mapping readiness. The study integrates a participatory design-inspired, artifact-first workflow with RAG-enabled retrieval from a closed corpus to support evidence-grounded reasoning and traceable citations.

Phase 1 uses an online survey to establish baseline patterns in practice (N = 86). Shared understanding is positively associated with mission clarity (r = 0.60, p < 0.001). Phase 2 uses a time-bounded comparative workshop with two conditions. Expert reviewers rate mission statement quality higher for the participatory design condition (mean 3.5) than the traditional condition (mean 2.8). Technical feasibility ratings are similar across conditions. Phase 3 demonstrates RAG-enabled, closed-corpus, retrieval-supported traceability using the Referencer tool. It is reported as a proof-of-concept for evidence-grounded rationale and auditability, and as a pathway …

Bridging The Gap: Care Team’S Perspectives On Technology And Ai Integration In Healthcare, Sarah Fernandes, Pranathi Boyina, Awatef Ergai Dr., Wellstar Health System, Mohammad Yousef Mousa Naser, Sylvia Bhattacharya Dr.

Symposium of Student Scholars

As healthcare systems increasingly integrate digital solutions, understanding the perspectives of frontline healthcare workers on technology adoption is critical. This study explores how Registered Nurses (RNs), Licensed Practical Nurses (LPNs), and Certified Nursing Assistants (CNAs), collectively referred to as the Care Team, interact with existing and emerging healthcare technologies, including artificial intelligence (AI). Given the growing reliance on digital tools for clinical and administrative tasks, this research examines the challenges and benefits perceived by healthcare professionals when incorporating AI-driven solutions into their workflows.

A cross-sectional research design was employed, involving 30 semi-structured interviews with Care Team members from an Intensive …

Carbon Accountability Scores: A Process-Oriented Approach For Carbon Offsetting Using Ai Agents, Joshit Mohanty, Vaishali Vaishali

Graduate Student Government Association Research Conference

Conventional carbon offset programs rely on quantified emissions to determine balancing requirements. While this approach offers a standardized means of measuring carbon output, it often provides industries with a loophole—allowing them to offset their emissions by purchasing equivalent credits for activities such as tree planting rather than tackling inefficiencies at the source. This research proposes a process-based framework called Carbon Accountability Scores (CA scores) to offer a proactive strategy for assessing and reducing carbon footprints. Instead of focusing on the mere balancing of emitted and sequestered carbon, CA scores integrate an organization’s operational processes into the calculation, thereby offering the …

Digital Thread: Bridging Macro–Micro Services In System-Of-Systems, Joshit Mohanty

Graduate Student Government Association Research Conference

Organizations and industries increasingly rely on distributed services in decentralized environments—ranging from large-scale, system-of-system architectures to fine-grained, agent-based microservices. While this distributed paradigm offers flexibility and innovation, it presents critical challenges such as interoperability gaps, inconsistent data formats, and a lack of holistic oversight. Traditional integration approaches, including ad-hoc middleware or enterprise service buses, tend to solve these issues reactively. As a result, technical debt accumulates, stakeholder misalignments persist, and scaling to new demands becomes complex.

This research proposes digital thread (DT) as the unifying framework to create an authoritative source of truth: a continuous flow of information across the …

Evaluating The Health Benefits And Cost-Effectiveness Of Dental Sealant Reapplication Among Children And Adolescents, Pritam Deb, Jayden Ayash, Christina Scherrer

Symposium of Student Scholars

Dental caries, commonly known as cavities, persist as a prevalent chronic disease among children. Dental sealants, which are transparent coatings applied to the molars, have been proven to prevent over 80% of caries in these teeth. However, the effectiveness of sealants diminishes over time, primarily due to their potential to detach shortly after application due to inadequate bonding, or else gradually over time. Notably, dental insurance coverage for resealing teeth after the initial sealant has been lost varies widely, with many policies only covering the cost of the initial application. This study employs a Markov model-based discrete event simulation to …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

The Effect Of Mental Demand On Body Postures, Rodrick Adams, Valentina Niño

Symposium of Student Scholars

How we perceive our work has a profound relationship with how our body reacts to help facilitate the performance of our tasks. This is an observational study of the experiment in which participants performed tasks under four different conditions (baseline, interruptions, time, and alarm) and used NASA-TLX (NASA- Task Load Index) scores to assess their mental workload for each condition across six dimensions: mental demand, physical demand, temporal demand, effort, performance, and frustration level. We juxtaposed their NASA-TLX score with corresponding REBA (Rapid Entire Body Assessment) scores while standing and RULA (Rapid Upper Limb Assessment) scores while sitting to determine …

Agile And Lean Six Sigma Integration: A Leadership Framework, Alessandro Laureani

International Conference on Lean Six Sigma

Submitting final version of the paper attached.

Agile and Lean Six Sigma integration: a Leadership framework

Author: Alessandro Laureani, Independent Lean Six Sigma Scholar, Ireland

E-mail: [email protected] Phone: +353 87 914 4532

Purpose

The purpose of this paper is to illustrate how Agile methodologies and Lean Six Sigma can coexist and propose a Leadership framework to successfully merge Agile methodologies with Lean Six Sigma practice.

Design/methodology/approach

The paper builds on the author’s doctoral thesis on Leadership for Lean Six Sigma, and integrate Agile practices based on the author’s experience in the software development industry.

Findings

Agile methodologies, that came to …

Lss Implementation In Micro Enterprises: Adoption Of Tools To Support Competitiveness, Seamus O'Reilly, Dermot Freeman, Lawrence Dooley

International Conference on Lean Six Sigma

LSS Implementation in Micro Enterprises:

Adoption of tools to support competitiveness

Seamus O’Reilly^a ([email protected]), Dermot Freeman^b ([email protected])

and Lawrence Dooley^a ([email protected])

^aCork University Business School, Ireland. ^bDermot Freeman & Associates, Ireland

Purpose

This study seeks to contribute to an emerging literature addressing Lean Six Sigma (LSS) implementation in the micro enterprise context. Specifically, it explores what LSS tools address business opportunities and challenges identified by micro enterprises.

Methodology

This study adopts a purposive sampling approach. Thirty micro enterprise who had availed of a lean start programme launched by a …

Replicating Lean Six Sigma Green Belt Education, Martinus J. Buijvoets, Bob Walrave, Jukka-Matti Turtiainen, Gregory H. Watson

International Conference on Lean Six Sigma

Purpose – This paper describes the intricates and possibilities of replicating a Lean Six Sigma Green Belt (LSSGB) education model from a pilot program to other universities—employing ‘replication as strategy’—based on a validated ‘business model.’

Study design/methodology/approach – This work is grounded in a case study on the ESTIEM LSSGB educational method and draws on the replication literature. Specifically: (1) replication as strategy (Winter and Szulanski, 2001) to replicate stimulating learning environments, and (2) replicating sets of teaching practices (Baden-Fuller and Winter, 2007). These theories are practiced using data obtained from various sources: Participant-observer data, interview data, and secondary case …

Six Sigma, Sustainability, And It Management: A Research Review And Discussion Of Future Directions, Manal Alduraibi, Timothy Winders, Chad Laux

International Conference on Lean Six Sigma

Abstract

Purpose- Six Sigma is based upon quality improvement by finding the root cause and refining processes to the precision of process outcomes. The purpose of this research was to conduct a systematic literature review (SLR) to explore the Six Sigma techniques and information technology (IT) management concepts to identify the IT management principle's impact on the sustainability of Six Sigma project efforts and identify the gaps that are essential to be addressed through further research. This research also discusses the principles of IT management upon the influence on Six Sigma projects, and subsequent contribution to organizational economic sustainability. An …

The Application Of Measures Of Lean Production For Services, Willem Salentijn, Jiju Antony, Chad Laux

International Conference on Lean Six Sigma

This paper gives insights on how to measure the degree of lean for services and explores existing instruments, proposing adaptions on an existing instrument, developed for production.

From Letters To Logistics - The Enabling Role Of A Lean Transformation Programme In A National Postal Service: The Case Of An Post, Ireland, Seamus O'Reilly, Leadiing Edge Group, An Post

International Conference on Lean Six Sigma

From Letters to Logistics - The enabling role of a lean transformation programme

in a national postal service: The case of An Post, Ireland

Seamus O’Reilly (Cork University Business School), David Murray (An Post) and Joe Aherne (Leading Edge Group)

Abstract

Purpose

This paper investigates the role of a lean transformation programme in supporting the transition of a national postal (mail) service from a traditional letter delivery service to a competitive parcel delivery service.

Methodology

Given the objective an intrinsic case study (Stake, 2005) approach was adopted, as this specific case was of interest. To support this approach the researchers …

Improve Outcomes In Lean Six Sigma With Servant Leadership, David W. Hoffa, Chad Laux, Manal Alduraibi

International Conference on Lean Six Sigma

1. Purpose

The purpose of this study was to explore lean leadership within Lean Six Sigma (LSS). The objective of this paper was to explore how LSS program success might be improved by focusing Black Belt efforts on mentoring Green Belts with a servant leadership model. The importance of Green Belt projects is typically overlooked in the literature. The effects of prioritizing the development of Green Belts and building a culture of continuous improvement over the traditional Black Belt project focus is explored.

2. Design/Methodology/Approach

The methodology of this paper is inspired by the authors’ field experiences in managing LSS …

Waste As A Product Of Organisational Culture, Dobrochna Sztajerska, Karolina Pawlusiak

International Conference on Lean Six Sigma

The organisational culture was subjected to studies for many years (Schein, 1983; Svyantek and DeShon, 1993; Sułkowski 2001, Chmielewska-Muciek 2009), so was the muda (waste) concept (Womack and Jones, 1996; Rother and Shook, 2003; Liker, 2003; Lisiecka and Burka, 2015). However, there is no research linking these two constructs, especially when it comes to looking for specific waste depending on the organisational culture.

Six Sigma And Lean Approach For Enhanced Process Value Chain, Maryam Zulfiqar

International Conference on Lean Six Sigma

Abstract

This research highlight the different aspects of implementing lean and six-sigma approach, their contrasting features and integration in manufacturing organizations. Qualitative research method has been used to conduct this research as the defined period of time for the research was limited. This method was pertinent for the deep analysis of literature and case studies of concerned approaches. It helped to conduct the research in a subjective manner. The use of secondary data saved time from preparing the questionnaires or surveys also the ethical approval from the University of the West of Scotland was not required. Descriptive feature of qualitative …

Applying Lean Six Sigma And Systematic Layout Planning To Improve Patient Transportation Equipment Storage In An Acute Care Hospital, Sandra Furterer, Pratheeka Kancharla

International Conference on Lean Six Sigma

Purpose:

The purpose of this project was to optimize the patient transportation process at an acute care hospital to achieve reduced transportation times.

Methodology:

A detailed Lean Six Sigma study on the patient transport and equipment handling processes helped to determine possible ways to reduce the equipment handling time which eventually reduces the patient transportation time. The Systematic Layout Planning (SLP) approach usually applied in manufacturing environments was used to identify which patient transport equipment was needed to be stored in which locations throughout the hospital footprint. The assignment of equipment to locations was determined based on frequency of use, …

Mapping Of The Information Flow Of The Valle Occidental Coffee Region: A System-Of-Systems Perspective, Irene Campos

CESUN Conference

Uncertainty is a characteristic of many of the contemporary environments that our systems inhabit. In the case of farming systems, uncertainty has always been present in the form of unpredictable weather conditions, disease outbreaks and evolving societal and economic factors. Uncertainty poses a challenge for communication and information alignment, which is especially important for a farming system responding to disasters. A first step towards finding solutions for problems of information alignment in systems is mapping and identifying information links in them. The goal of this research is to map the information flow and feedback dynamics of the Valle Occidental coffee …

(Poster) Internal Restoration And Modernization Of A 1948 Wwii Era Jukebox, Miles Furr, Cristiana Olarinre, Joel Carpenter, Elijah Knox, George Ricco, Paul Talaga, Suranga Dharmarathne

ASEE IL-IN Section Conference

Using Six Sigma guidelines under the sponsorship of The University of Indianapolis in cooperation with the client, Brugh Industrial Engineering, this project is to modernize the functionality and interface of a Rockola Model 1428 Jukebox while maintaining its vintage appeal. The process of modernization includes meeting today's industrial safety standards, incorporating ethernet protocol, and utilizing a programmable logic controller, PLC. The jukebox is a showcase of current automation technology. Lighting has been upgraded from fluorescent and incandescent bulbs to addressable nano pixel LEDs. The amplifier, coin system, and record selection system were revitalized to OEM operation standards. All switches within …

Robust Allocation Of Funds For Nonstructural Flood Risk Mitigation In Coastal Louisiana, Simón Gómez Sierra, David R. Johnson, Matthew P. Shisler, Zachariah T. Richardson

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coastal Louisiana is a critical economic, ecological and cultural asset, acting as a major hub for waterborne commerce, fisheries, and the petrochemical industry, and also as one of the world’s unique wetlands. Unfortunately, this rich environment is in great danger from the threat of hurricanes and storm surge flooding. Direct economic losses are estimated to average $2.7 billion per year under current conditions, and this could increase to $12 billion a year, or more, within 50 years if nothing is done. To prevent this catastrophe, Louisiana has developed a Comprehensive Master Plan for a Sustainable Coast, which plans to spend …

Efvs Effects On Pilot Performance, Michael Campbell, Nsikak Udo-Imeh, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

Flight tests have been conducted at Purdue University using a computer-based flying simulator in an attempt to determine and measure the effects of Enhanced Flight Vision Systems (EFVS) on the performance of pilots during landing. Knowledge of these effects could help guide future design and implementation of EFVS in modern commercial aircraft, and further increase pilots’ ability to control the aircraft in low-visibility conditions. The problem that has faced researchers in the past has revolved around the difficulty in interpreting the data which is generated by these tests. The difficulty in making a generalized conclusion based on the large amount …

Digital Design Of Intralogistics Systems: Flexible And Agile Solutions To Short-Cyclic Fluctuations, Christoph Pott, Anike Murrenhoff, Moritz Wernecke, Philipp-Akira Burger

International Material Handling Research Colloquium

Poster 20

Urban Parcel Logistics Hub And Network Design: The Impact Of Modularity And Hyperconnectivity, Benoit Montreuil, Shannon Buckley, Louis Faugere, Reem Khir, Shahab Derhami

International Material Handling Research Colloquium

Poster 27

Integrated Intermodal Network Design With Nonlinear Inter-Hub Movement Costs, Mohammad Ghane-Ezabadi, Hector A. Vergara

International Material Handling Research Colloquium

Poster 11

On The Unique Features And Benefits Of On-Demand Distribution Models, Jennifer Pazour, Kaan Unnu

International Material Handling Research Colloquium

Poster 6

Minimizing The Variance Of Fulfillment Cycle Time In A Central Fill Pharmacy: Why And How, Mohamed El Tonbari, Leon Mcginnis

International Material Handling Research Colloquium

Poster 31

Dynamic Batching For Order Picking In Warehouses, Jelmer Pier Van Der Gaast, Bolor Jargalsaikhan, Kees Jan Roodbergen

International Material Handling Research Colloquium

Poster 26

Shuttle-Based Storage And Retrieval Systems With Robotic Order-Picking Shuttle Carrier, Tone Lerher

International Material Handling Research Colloquium

Poster 12

Transportation Service Provider Collaboration: Benefits And Insights, Steven Roesch, Kimberly Ellis

International Material Handling Research Colloquium

Poster 30