Industrial Engineering Commons^™

Integrating Gis With Interim Payment Valuation In Road Construction Projects: A Conceptual Framework, Abdulrahman I. Iro, Juma M. Matindana, Julian Ijumulana

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Interim Payment Valuation is a critical process in road construction contract administration, yet conventional valuation practices remain heavily dependent on manual measurements, fragmented documentation, spreadsheets, and professional judgement. These limitations can affect measurement accuracy, transparency, traceability, and the timeliness of payment certification. Although Geographic Information Systems have increasingly been applied to construction planning, quantity measurement, progress monitoring, infrastructure management, and decision support, their integration with contractual and financial processes for interim payment valuation remains insufficiently explored. This study therefore develops a conceptual framework for integrating GIS with Interim Payment Valuation in road construction projects. A PRISMA-guided structured literature review …

Voltage-Related Power Quality Issues And Impacts On Distribution Networks With Sensitive Loads - A Review, Godwin Elinazi Mnkeni, Jackson Justo, Aviti Thadei Mushi, Bakari M. M. Mwinyiwiwa

Tanzania Journal of Engineering and Technology (TJET)

Voltage disturbances are the most important power quality (PQ) complications that customers and power utilities face in this smart era. The growing adoption of sophisticated electronic equipment and integration of renewable energy sources (RES) into power grids has increased the susceptibility of power distribution networks (PDNs) to voltage sags, swells, interruptions, flicker, and voltage imbalance. These disturbances, mainly caused by upstream faults, switching operations, and RES integration, compromise voltage PQ and system reliability. Consequently, they accelerate equipment degradation, increase electronic waste (e-waste), raise reactive power demand and maintenance costs, increase power losses, and impose substantial economic losses on customers and …

Exploring Consultancy-Related Variations In Public Building Projects: A Review Towards A Management Framework, Grayson Bambaza, Ismail W. R. Taifa, George S, Mwaluko

Tanzania Journal of Engineering and Technology (TJET)

Consultancy-related variations remain one of the leading causes of cost overruns, schedule delays, quality deficiencies, and contractual disputes in public building projects. Although various studies have been undertaken to document the causes of variations in construction works, the same level of interest has not been shown for consulting services variations across the consulting services spectrum and their consequences for effective management. This study explores variations in consulting services for public works by systematically reviewing the existing literature using the PRISMA (Preferred Reporting Items for Systematic reviews and Meta Analyses) guidelines. Relevant articles published from 2020 to 2026 were retrieved from …

Decision Support Tool For The Maintenance Of Meter Gauge Railway Permanent-Way Infrastructures: A Concept Paper, Hamisi J. Maulid, Beatus A.T Kundi, Juma M. Matindana, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

A Decision Support Tool (DST) represents a transformative way of modernising maintenance practice on the permanent-way infrastructure of Meter Gauge Railway (MGR). Maintenance practice remains largely reactive, as the MGR plays a strategic role in transporting both freight and passengers, resulting in inefficient resource allocation, high operational risk, and growing Lifecycle expenses. This concept paper explores the potential and the design challenges for a DST that combines fuzzy analytic hierarchy process (Fuzzy-AHP) modelling, multi-criteria decision analysis (MCDA), Geographic Information Systems (GIS) and predictive machine learning (ML) analytics for evidence-based, future-oriented maintenance management. The paper draws on peer-reviewed studies from …

Optimization Of Gas Consumption, Cost And Production Rate For Computerized Numerical Control Oxy-Acetylene Flame Cutters, Eustace K. William, Simon I. Marandu, Enock W. Nshama

Tanzania Journal of Science

This study examined the impact of flame cutting parameters (i.e., cutting speed, plate thickness and nozzle diameter) on oxy-acetylene gas consumption, cost and production rate. A full factorial design of experiments was used to generate 27 experiments, which were conducted using a CNC flame cutter. The analysis of variance (ANOVA) method was used to determine significant process parameters, followed by regression analysis using the MINITAB ® software. The technique for order preference by similarity to ideal solutions (TOPSIS) was used to determine the optimal cutting parameters for minimizing the consumption and cost estimation of oxy- acetylene gas and maximizing the …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Optimization Of Vehicle Mix For Three-And Four-Wheel Passenger Transportation System In Nigeria, Omotunde A. Muyiwa, Hamid A. Jimoh, Kolawole T. Oriolowo

Tanzania Journal of Engineering and Technology (TJET)

Efficient transportation systems are essential for reducing passengers waiting times in densely populated areas. However, there is a dearth of information on the optimization of vehicle mix for three-and four-wheel transportation systems in Nigeria. The present study was designed to optimize the vehicle mix for three-and four-wheel passenger transportation to improve transportation efficiency. Twenty purposively selected vehicles were observed, while a queuing model (M/M/s) was used to determine passenger arrival rates during different periods (morning, afternoon, and evening). An integer linear programming model was developed to minimize passenger waiting times. Data on vehicle types, capacities, travel cycles, and average passenger …

Implementation Of The Fourth Industrial Revolution Technologies In Tanzania’S Downstream Oil And Gas Industries, Vitalis John Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The advent of the fourth industrial revolution (IR4.0) has resulted in the digital transformation of multiple sectors of the economy due to the disruptive nature of the technologies driving the revolution. The technologies have already found their way into the oil and gas industries across the globe, especially in upstream, midstream, and downstream operations. However, the degree of implementation is not the same for these operations, considering the complexities involved, integrated process, the associated risk and investment cost, among others. This study aimed to establish the implementation level of IR4.0 technologies in the downstream operations. A survey method was employed …

Analysis Of Factors Enabling Organisational Governance Maturity For The Technical Audit Function In Tanzania, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

The study aimed to identify key factors contributing to Organisational Governance Maturity (OGM) of the Technical Audit Functions (TAF) in Tanzania.  The study employed a sequential approach as a research design.  The first step was to collect and analyse literature studies to identify factors enabling the OGM of the TAF.  Next, a questionnaire was administered to one hundred twenty-eight (128) respondents from seven (7) TAFs to rank the key enabling factors that were identified from the literature that influence the OGM of TAF in Tanzania.  Using data from a questionnaire administered to 128 respondents, a two-step strategy was employed to …

Multi-Objective Optimization Of Waste Incineration For Minimal Carbon Monoxide And Sulfur Dioxide Emission And Rate Maximization: A Case Study Of Mbezi, Mkuranga-Pwani, Tanzania, Grangay M. Nyanghura, Enock W. Nshama

Tanzania Journal of Science

Incineration is widely employed for hazardous waste disposal, but results in harmful flue gas emissions. This study optimizes a double-chamber incineration process to reduce sulfur dioxide (SO2) and carbon monoxide (CO) emissions while maximizing the incineration rate. The effects of waste mass, primary chamber temperature (PT), and secondary chamber temperature (ST) were analyzed using a full factorial design of 27 experiments. ANOVA revealed that mass had the greatest impact on emissions and incineration time, ST had a moderate effect, and PT had little influence. Regression analysis provided models for incineration time, CO, and SO2 emissions. Single-objective optimization using sequential quadratic …

Design Of A Sequential Logic Control System For Water Recycling In Car Wash Operations For Minimising Utility Costs, Enock W. Nshama, Mussa Iddi Mgwatu

Tanzania Journal of Engineering and Technology (TJET)

The car wash sector in Tanzania is expected to expand in the next few years, since the trend of imported cars is increasing. However, the traditional method of washing cars is subjected to water overuse and environmental pollution. This study presents a design of water recycling sequential logic control system to come up with a cost-effective car wash operation aimed at effectively utilising water and electricity resources. Data were collected at 78 car wash stations in Dar es Salaam region to determine water and electricity costs. Data were analysed using MS Excel and Minitab to establish the trend of utility …

Optimization Of Welding Parameters For Carbon Steel Fabrication: A Trade-Off Between Tensile Strength And Heat-Affected Zone, Melkiory B. Njawala, Simon I. Marandu, Enock W. Nshama

Tanzania Journal of Engineering and Technology (TJET)

This study focused on optimizing gas metal arc welding (GMAW) parameters for AISI 1045 carbon steel to balance the ultimate tensile strength (UTS) and heat affected zone (HAZ) size of the weldment. Using a full factorial design of experiments (27 trials), the influence of welding current, arc voltage, and travel speed on UTS and HAZ size of AISI 1045 carbon steel weldments were investigated. From the analysis of results, using Analysis of variance (ANOVA) technique, the results revealed that current, travel speed and arc voltage contributed 74.41%, 19.05% and 0.04%, respectively, to the total percentage of variations on UTS data. …

Combined Optimisation Of Machining Parameters, Tool Wear, Dimensional Errors And Quality Deviations In Multi-Pass Turning Operations, Mussa I. Mgwatu

Tanzania Journal of Engineering and Technology (TJET)

Measurements of on-line tool wear and part dimensional accuracy in machining operations are not readily available in machining shop floor because they involve higher investment such that the decisions of tool wear and part quality for intermediate cutting passes cannot be justified. This paper demonstrates how the optimisation of machining parameters can be made together with tool wear and part quality for turning operations. Two optimisation models were developed for maximum material removal rate and minimum production cost. A theoretical framework was initially presented before the two models were formulated. Input data for the models were adopted from previous studies …

The Royal Academy Of Engineering, Uk And The Enriching Of Engineering Education Training And Practice Programme In Sub-Saharan Africa, Bavo B. Nyichomba

Tanzania Journal of Engineering and Technology (TJET)

This paper elucidates initiatives taken by the Royal Academy of Engineering, UK, to overcome barriers in education and training in Sub-Sahara African higher learning engineering institutions. The said barriers include mismatches of curriculum, ineffectual teaching and learning and little exposure of academic staff to engineering practice. In order to overcome such barriers, the Royal Academy of Engineering established the two programmes in the region. The first one, Enriching Engineering Education Programme (EEEP) from 2014/15 to 2015/16 where the University of Dar es Salaam coordinated this programme as a hub for East African universities namely; Makerere University (Uganda), Moi University (Kenya), …

Performance Dynamics Of Activated Carbon-Methanol Pair In Adsorption Refrigeration Systems, Ibrahim J. Mwasubila

Tanzania Journal of Engineering and Technology (TJET)

Adsorption refrigeration systems have shown potential for addressing the adverse effects of traditional compressor-based refrigeration systems. Adsorption refrigeration systems that utilise activated carbon and methanol demonstrate good performance, especially at temperatures below 0 °C. This combination significantly improves the cooling performance of the system, making it a dependable option for freezing applications. Despite having the potential to meet cooling demand and be eco-friendly, the adsorption refrigeration system has several drawbacks that hinder its commercialisation. This paper discusses the properties of the activated carbon methanol pair in the adsorption refrigeration system. The focus is on the desorption temperature, thermal stress, repeatability …

Prospects Of Clean Cooking Energy In Africa - Transition Pathways And Implications, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Despite abundant renewable energy resources, African countries still suffer from energy poverty, particularly in cooking. Up to 2022, about 74% of the African population had no access to clean cooking energy. With focus to Sub-Saharan African population, 90% has no access to clean cooking energy which decrease by 7% when kerosene is included. Traditional cooking, which involves the use of charcoal and firewood, is associated with health problems, environmental degradation, socioeconomic issues, and gender inequality. Transitioning to clean cooking energy not only promises significant health benefits but also offers opportunities for sustainable economic development and environmental preservation. In this study, …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy

Tanzania Journal of Engineering and Technology (TJET)

This paper reviewed the sensible thermal storage systems specifically designed for cooking applications. The review focuses on the characteristics of storage materials, their practical applications, and the overall performance of the systems. The review consolidated an array of experimental and numerical research published across various sources such as journals, conferences, books, online resources, and professional reports. A systematic review is used to reach the conclusion of this paper. Significant findings from this study include the wide range of storage capacities attained from small-scale systems that can store ~1–5 MJ of energy for a single meal to bigger systems that can …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Effects Of Cutting Conditions On Tool Temperature And Material Removal Rate In Turning Operations, Simon I. Marandu

Tanzania Journal of Engineering and Technology (TJET)

Cutting conditions in manufacturing processes have effects on tool temperature and material removal rate. The objective of this study was to investigate the effects of cutting conditions namely spindle speed, feed rate, depth of cut and tool nose radius on tool temperature and material removal rate in turning operations. A total of 81 experiments were conducted to measure tool temperature and material removal rate in order to determine the effects of cutting conditions on tool temperature and material removal rate using ANOVA and regression analysis. The results show that tool nose radius, depth of cut, and spindle speed are significant …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Mechanical Properties Of Pineapple Braided Fabric Reinforced Epoxy Matrix Composite Fabricated Via Vacuum-Assisted Resin Infusion Moulding, Bwire S. Ndazi

Tanzania Journal of Engineering and Technology (TJET)

Fibres and fabrics obtained from lignocellulosic materials have attracted attention as reinforcements in polymer composites due to their competitive mechanical and ecological benefits. While the potential of randomly oriented pineapple leaves fibres (PALF) in composites have explored in previous studies, the mechanical behaviour of braided PALF fabric composites fabricated via vacuum-assisted resin infusion moulding (VARIM) remains relatively unexplored. In this study the tensile, compression and flexural strengths of epoxy-based composite containing 40 vol.% braided pineapple fabrics, fabricated using VARIM, for load carrying applications were investigated. The results revealed that the three-layered unbleached pineapple braided fabric composites exhibited a tensile strength …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania, Fatuma S. Ikuja

Tanzania Journal of Engineering and Technology (TJET)

Industries are the main consumers of products from higher learning institutions (HLIs); graduates for employment and research outputs for socio-economic development. Research outputs from HLIs are commercialized as services or products facilitated by academia-industry collaborations. The collaborations are expected to address mismatch between labour market needs and HLIs’ products, which has resulted in graduates’ employability challenges. Despite their importance, effective academia-industry collaborations remain challenging. This study explores the effectiveness of Academia-Industry collaborations established by HLIs in implementing the Higher Education Economic Transformation (HEET) project (2021-2026) in Tanzania. One of the project objectives is to build functional linkages between industry and …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Wet Gas Metering Performance Using Conventional Flow Measurement Devices, Vitali Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The demand for and production of natural wet gas from wells has significantly risen in recent years. Although natural gas liquids hold substantial value in the oil and gas market, their presence in wet gas adversely affects gas metering, leading to overreading during measurement. A comprehensive study has been undertaken to formulate and enhance correlations for rectifying overreading in wet gas metering. Nevertheless, most current correlations are designed for horizontal configurations of traditional meters. Mitigating this constraint is crucial to consider the impact of gravity on pressure loss in vertically oriented systems. This study seeks to evaluate the efficacy of …

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani

Tanzania Journal of Engineering and Technology (TJET)

The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …

Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Cement concrete has been in use for centuries as one of the primary construction materials. Its demand in the construction industry is expected to continue for several centuries before the full development of alternative products. However, one of the main areas of research interest is understanding how its constituents can be tailored to make its properties predictable to reduce risks associated with structural failures, reconstruction and reduced durability. These hindrances associated with cementitious concrete result from several attributes, including constituent material characteristics, mixing ratios and workmanship. Understanding the predictability of cement concrete properties requires computer modelling tools to provide reliable …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …