Industrial Engineering Commons^™

A Novel Hexagonal-Zigzag Cellular Infill Structure For Additive Manufacturing, Md. Saidur R Roney, Amm Nazmul Ahsan, Prosenjit Barua

Manufacturing & Industrial Engineering Faculty Publications

The rigidity of the Additively Manufactured objects can be tailored by manipulating the infill lattice type and density. In this research, an island type novel infill structure termed as Hexagonal-Zigzag pattern is introduced, and its mechanical performance is investigated. In this pattern, the zigzag raster reflects the repeating hexagonal shaped cell constituting the parallel-oriented islands and 90° rotation of the pattern in each layer distributes the island span along both transverse and longitudinal directions of the printing contour. A mathematical model is established to illustrate the effect of the infill parameters on hexagon unit cell size and relative infill density. …

Data Driven Estimation Of Pore Size Using 1d Light Emissions For Laser Powder Bed Fusion Additive Manufacturing, Jose Galarza, Jorge Barron, Luis Jimenez, Tamer Oraby, Jianzhi Li, Farid Ahmed

Manufacturing & Industrial Engineering Faculty Publications

The quality assurance of the Laser Powder Bed Fusion Process (LPBF) has been extensively investigated over the last decade for in-situ monitoring of metal additive manufacturing. The process inherently generates voids within the bulk of the part, which can detrimentally affect the quality of the printed part. The characterization of these voids by estimating their size and identifying their geometrical features remains a challenge. This study introduces a Machine Learning (ML) based framework for estimating void sizes of varying geometries using layer-wise one-dimensional (1D) average light intensity signal obtained from the optical tomography system during the 3D printing of metallic …

Investigation Of Process Parameters To Fabricate Tiwmo Refractory Medium Entropy Alloy Via Laser Powder Bed Fusion, Abdullah Al Masum Jabir, Lindsey A. Salazar, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

This paper presents an experimental study on the fabrication of a TiWMo refractory medium-entropy alloy (RMEA) using laser powder bed fusion (PBF-LB/M, commonly known as selective laser melting) from elemental powders as well as successful alloy formation on titanium substrates. The effects of tungsten particle size and process parameters on successful TiWMo RMEA fabrication have been explored using scanning electron microscopy (SEM), x-ray diffraction, hardness measurement and microstructural analysis. Scanning electron microscope (SEM) analysis revealed that the lowest percentage (0.01%) of unmelted tungsten particles was observed at a laser power of 350 W and scanning speed of 250 mm/s, particularly …

Layer-Wise Printing Parameter Optimization For Laser Powder Bed Fusion, Chaoran Dou, Rongxuan Wang, Raghav Gnanasambandam, Jianzhi Li, Zhenyu James Kong

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing (AM) is a transformative technology that enables the fabrication of complex geometries layer by layer. However, metal parts produced via AM processes such as laser powder bed fusion (LPBF) are prone to various defects, including porosity and deformation. These defects often result from suboptimal printing parameter settings. Traditional approaches typically aim to reduce defects by optimizing a fixed set of parameters for the entire part. However, such methods do not account for layer-wise variations in printing conditions caused by changes in geometry, heat transfer, and re-heating effects. While optimizing parameters for each layer could improve part quality, it …

Reinforcement Learning For Imbalanced Data In Robotic Anomaly Detection Within Autonomous Manufacturing, Salma Messaoudi, Ahmed Bendaouia, El Hassan Abdelwahed, Mohammed Ameksa, Hajar Mousannif, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Ensuring reliable anomaly detection in industrial robots is critical for safe and autonomous manufacturing operations. However, it remains challenging due to temporal dependencies and class imbalance in sensor data. This study presents a reinforcement learning approach using Deep Q-Network (DQN) enhanced with Long Short-Term Memory (LSTM) and Gradient Boosting Machine (GBM) for robust anomaly detection in robotic systems. The proposed framework integrates an LSTM into the DQN policy to capture temporal patterns. It also introduces a novel GBM-based reward mechanism that mitigates class imbalance by applying SMOTE (Synthetic Minority Over-sampling Technique) after removing temporal dependencies. Experimental results demonstrate that this …

Artificial Intelligence And Additive Manufacturing As A Coupled Design System: Rethinking Inference, Manufacturability, And Design Education, Charul Chadha, Garth Crosby, Sabit Ekin, Mohamed Gharib, Eman Hammad, Congrui Jin, Ali Ahmad Malik, Noemi Mendoza Diaz, Calahan Mollan, Monsuru Ramoni

Manufacturing & Industrial Engineering Faculty Publications

Artificial intelligence (AI) is becoming deeply integrated into additive manufacturing (AM) workflows, reshaping how designers approach geometry, materials, and process constraints. AI holds significant potential by accelerating design exploration, revealing complex patterns in AM behavior, and supporting earlier assessment of manufacturability. At the same time, it introduces new risks related to model transparency, data quality, physical validity, and the potential for overreliance by students and practitioners. This perspective examines these issues through four guiding questions that address the role of AI in AM-enabled design, the gaps that limit or enable AI contribution, the implications for engineering education, and the responsibilities …

Reinforced Scan: A Reinforcement Learning Enabled Optimal Laser Scan Path Planning In Laser Powder Bed Fusion Additive Manufacturing, Chaoran Dou, Jihoon Chung, Raghav Gnanasambandam, Yuhao Wu, Jianzhi Li, Zhenyu James Kong

Manufacturing & Industrial Engineering Faculty Publications

Additive Manufacturing is an innovative technology that fabricates parts layer by layer. However, in Laser Powder Bed Fusion (LPBF), printed metal parts often exhibit residual stresses, deformations, and other defects due to non-uniform temperature distribution during the printing process. To mitigate these issues, an optimized scan sequence within each layer can improve thermal uniformity. Traditional optimization methods, which rely on domain knowledge and employ trial-and-error or heuristic approaches, often fail to achieve optimal solutions due to the complex nature of the problem. One major challenge in improving scan strategies lies in the vast search space required to optimize the scan …

Direct Ink Writing Of Shear Exfoliated Two-Dimensional Nanomaterial- Elastomeric Multifunctional Nanocomposite, Md Abdur Rahman Bin Abdus Salam, Asif Hasan Ridoy, A K M Abirul Haque, Muhammad Shahbaz Rafique, Md Arafat Hossain, Md Shahriar Forhad, Matthew G. Boebinger, Farid Ahmed, Karen Lozano, Ali Ashraf

Manufacturing & Industrial Engineering Faculty Publications

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman …

Intelligent Real-Time Flotation Froth Stability Monitoring Using Embedded Computer Vision: Lead (Pb) Processing Case Study, Ahmed Bendaouia, Taha Ismaili, Ismail Najib, Oussama Hasidi, Intissar Benzakour, Jianzhi Li, El Hassan Abdelwahed

Manufacturing & Industrial Engineering Faculty Publications

Froth stability in flotation refers to the ability of the froth layer to remain intact and avoid collapsing during the flotation process. A stable froth layer is crucial to maximizing mineral recovery and ensuring the efficient operation of flotation cells. Several factors influence the stability of the froth, including the depth of the froth, the crowding, the size of the bubbles, and the rate of movement of the froth. In this study, our main objective is to analyze and evaluate froth stability in real time, since it plays a critical role in process optimization for flotation-based mineral processing. We propose …

Process-Driven Manufacturability Constraints In Design For Wire Arc Additive Manufacturing, Monsuru Ramoni, Sampson Gholston, Albert E. Patterson

Manufacturing & Industrial Engineering Faculty Publications

Wire arc additive manufacturing (WAAM) has emerged as a useful option for large-scale metal additive manufacturing. It has gained widespread use in the aerospace industry and other applications that require large and complex custom parts. The process is a combination of a precise control system and a welding process, typically GTAW or MIG welding. It is a member of the directed energy deposition (DED) family of AM processes. Compared with many metal AM processes, it is relatively simple and cost-effective but almost always requires a significant amount of postprocessing before parts can be used. The AM-based nature of the process …

Transparent Eeg Analysis: Leveraging Autoencoders, Bi-Lstms, And Shap For Improved Neurodegenerative Diseases Detection, Badr Mouazen, Ahmed Bendaouia, Omaima Bellakhdar, Khaoula Laghdaf, Aya Ennair, El Hassan Abdelwahed, Giovanni De Marco

Manufacturing & Industrial Engineering Faculty Publications

Highlights

• Novel hybrid architecture: Combined autoencoders with bidirectional LSTM networks for enhanced EEG signal classification, achieving 98% accuracy in distinguishing AD, FTD, and healthy controls.

• Explainable AI integration: Implemented SHAP (SHapley Additive exPlanations) framework to enhance model transparency and identify entropy as the most influential feature for neurodegenerative disease detection.

• Optimal temporal segmentation: Demonstrated that 5-s EEG windows with 50% overlap provide the best balance between classification accuracy and computational efficiency.

• Comprehensive feature extraction: Utilized Power Spectral Density (PSD) analysis across standard frequency bands (Delta, Theta, Alpha, Beta, Gamma) following autoencoder-based dimensionality reduction.

• Superior performance validation: Outperformed traditional machine learning …

  ---

  Go to article

Using Statistical Clustering Of Trajectory Data To Support Analysis Of Subject Movement In A Virtual Environment, Martin Galicia Avila, Douglas Timmer, Alley C. Butler

Manufacturing & Industrial Engineering Faculty Publications

Gracia de Luna conducted experiments with an HMD virtual environment in which human subjects were presented with surprise distractions. His collected data for head, dominant hand, and non-dominant hand included 6 DOF human subject trajectories. This paper examines this data from 57 human subject responses to those surprise virtual environment distractions using statistical trajectory clustering algorithms. The data is organized and processed with a Dynamic Time Warping (DTW) algorithm and then analyzed using the Density Based Spatial Clustering (DBSCAN) algorithm. The K-means method was used to determine the appropriate number of clusters. Chi Squared goodness of fit was used to …

Machine Learning And Clinical Eeg Data For Multiple Sclerosis: A Systematic Review, Badr Mouazen, Ahmed Bendaouia, El Hassan Abdelwahed, Giovanni De Marco

Manufacturing & Industrial Engineering Faculty Publications

Multiple Sclerosis (MS) is a chronic neuroinflammatory disease of the Central Nervous System (CNS) in which the body’s immune system attacks and destroys the myelin sheath that protects nerve fibers, leading to a wide range of debilitating symptoms and causing disruption of axonal signal transmission. Accurate prediction, diagnosis, monitoring and treatment (PDMT) of MS are essential to improve patient outcomes. Recent advances in neuroimaging technologies, particularly electroencephalography (EEG), combined with machine learning (ML) techniques — including Deep Learning (DL) models — offer promising avenues for enhancing MS management. This systematic review synthesizes existing research on the application of ML and …

A Machine Learning Approach To Detect Pores In Laser Powder Bed Fusion Additive Manufacturing, Jose Galarza, Jose Barron Jr., Luis Jimenez, Tamer Oraby, Jianzhi Li, Farid Ahmed

Manufacturing & Industrial Engineering Faculty Publications

Real-time detection of pores in the Laser Powder Bed Fusion (LPBF) metal Additive Manufacturing (AM) process is proposed in this study and can be utilized for in-situ process monitoring and quality control. The average light emission data from the process captured by an optical tomography camera can be integrated into a defect detection module to characterize defects after the deposition of a layer. The light emission contains information on the process zone which could be extracted with the appropriate data techniques. In this paper, we proposed a machine-learning approach that utilizes the mean light intensity data from the melt-pool monitoring …

Additive Manufacturing Applications In Mission-Critical Operations: A Review, Arup Dey, Olusanmi Adeniran, Monsuru Ramoni

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing (AM) is used to fabricate complex components from a wide variety of materials in an additive manner. AM brings several benefits, such as reduced lead times, on-demand production, creation of complex customized designs without tooling requirements, and remote design sharing. However, the use of AM for critical components is limited in large missions due to quality and reliability concerns, as is the case with many manufacturing technologies. Enhancing the acceptance of AM-built parts for mission-critical components can be achieved by producing highly reliable parts, establishing robust quality standards, and continually improving part properties. This review article comprehensively explores …

Flow And Heat Transfer Experimental Study For 3d-Printed Solar Receiving Tubes With Helical Fins At Internal Surface, Fouad Haddad, Naznin Nuria Afrin, Jianzhi Li, Peiwen Li, Bharath Pidaparthi, Samy Missoum, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

3D-printing technology was applied to fabricate novel solar thermal collection tubes that have internal heat transfer enhancement fins and external surfaces with high solar absorptivity and low emissivity due to the ability to use different materials in one tube. Helical fins were selected to introduce circumferential flow and thus minimize the circumferential temperature difference of the tube that receives sunlight on one side. The structures of the helical fins were previously optimized from computational fluid dynamics (CFD) analysis with the objective of low entropy production rate by looking for high heat transfer coefficient and relatively lower pressure loss. High-temperature alloy, …

Molecular Dynamics-Based Two-Dimensional Simulation Of Powder Bed Additive Manufacturing Process For Unimodal And Bimodal Systems, Yeasir Mohammad Akib, Ehsan Marzbanrad, Farid Ahmed

Manufacturing & Industrial Engineering Faculty Publications

The trend of adapting powder bed fusion (PBF) for product manufacturing continues to grow as this process is highly capable of producing functional 3D components with micro-scale precision. The powder bed’s properties (e.g., powder packing, material properties, flowability, etc.) and thermal energy deposition heavily influence the build quality in the PBF process. The packing density in the powder bed dictates the bulk powder behavior and in-process performance and, therefore, significantly impacts the mechanical and physical properties of the printed components. Numerical modeling of the powder bed process helps to understand the powder spreading process and predict experimental outcomes. A two-dimensional …

Gaze Tracking Embedded Collaborative Robots For Automated Metrology And Reverse Engineering, Sachithra H. Karunathilake, Md Shahriar Forhad, Zhaohui Geng

Manufacturing & Industrial Engineering Faculty Publications

Conventional geometric metrology, or three-dimensional (3D) scanning, and reverse engineering heavily rely on the experience of the operators. With an increasing need for automation, robot arms have been adopted for this task. However, due to the large variety of parts and designs, automated path planning could provide a scanning solution that may overlook the critical area, which could potentially deteriorate the scan results. This article explores the integration of collaborative robotics (cobots) with eye-tracking technology to improve the autonomous 3D scanning process. The primary objective of this study is to enhance the accuracy and efficiency of cobots in 3D scanning, …

Data-Driven Roughness Estimation Of Additively Manufactured Samples Using Build Angles, Jose Galarza, Jose Barron Jr., Farid Ahmed, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Achieving control of Laser Powder Bed Fusion (L-PBF) over the quality of the print is the main motivation for finding an optimum set of parameters in the process. Surface roughness is one of the characteristics of the print that impacts the performance of the desired functionality. This research focus is to relate the build angle with the surface roughness on the L-PBF printed specimens and utilize machine learning methods for roughness estimation of geometric features with varying build angles. The EOS M290 L-PBF printer was used to print Inconel-718 coupons using standard process parameters while varying build angles from 20 …

Enhancing Resilience In Complex Energy Systems Through Real-Time Anomaly Detection: A Systematic Literature Review, Ali Aghazadeh Ardebili, Oussama Hasidi, Ahmed Bendaouia, Adem Khalil, Sabri Khalil, Dalila Luceri, El Hassan Abdelwahed, Sara Qassimi, Antonio Ficarella

Manufacturing & Industrial Engineering Faculty Publications

As real-time data sources expand, the need for detecting anomalies in streaming data becomes increasingly critical for cutting edge data-driven applications. Real-time anomaly detection faces various challenges, requiring automated systems that adapt continuously to evolving data patterns due to the impracticality of human intervention. This study focuses on energy systems (ES), critical infrastructures vulnerable to disruptions from natural disasters, cyber attacks, equipment failures, or human errors, leading to power outages, financial losses, and risks to other sectors. Early anomaly detection ensures energy supply continuity, minimizing disruption impacts, an enhancing system resilience against cyber threats. A systematic literature review (SLR) is …

Prediction Of Tool Wear And Surface Finish Using Anfis Modelling During Turning Of Carbon Fiber Reinforced Plastic (Cfrp) Composites, Anil K. Srivastava, Md. Mofakkirul Islam

Manufacturing & Industrial Engineering Faculty Publications

Carbon fiber-reinforced plastics (CFRP) are widely used in various industries due to their high strength to weight ratio, corrosion resistance, durability, and excellent thermo-mechanical properties. The machining of CFRP composites has always been a challenge for the manufacturers. In this study, CNC turning operation with coated carbide tool is used to machine a specific CFRP and the relationship between the cutting parameters (Speed, Feed, Depth of Cut) and response parameters (Vibration, Surface Finish, Cutting Force and Tool Wear) are investigated. An adaptive-network-based fuzzy inference system (ANFIS) model with two multi-input–single-output (MISO) system has been developed to predict the tool wear …

A Survey On Fused Filament Fabrication To Produce Functionally Gradient Materials, Arup Dey, Monsuru Ramoni, Nita Yodo

Manufacturing & Industrial Engineering Faculty Publications

Fused filament fabrication (FFF) is a key extrusion-based additive manufacturing (AM) process for fabricating components from polymers and their composites. Functionally gradient materials (FGMs) exhibit spatially varying properties by modulating chemical compositions, microstructures, and design attributes, offering enhanced performance over homogeneous materials and conventional composites. These materials are pivotal in aerospace, automotive, and medical applications, where the optimization of weight, cost, and functional properties is critical. Conventional FGM manufacturing techniques are hindered by complexity, high costs, and limited precision. AM, particularly FFF, presents a promising alternative for FGM production, though its application is predominantly confined to research settings. This paper …

Spectral Behavior Of Fiber Bragg Gratings During Embedding In 3d-Printed Metal Tensile Coupons And Cyclic Loading, Farid Ahmed, Md Shahriar Forhad, Mahmudul Hasan Porag

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing (AM) enables the spatially configurable 3D integration of sensors in metal components to realize smart materials and structures. Outstanding sensing capabilities and size compatibility have made fiber optic sensors excellent candidates for integration in AM components. In this study, fiber Bragg grating (FBG) sensors were embedded in Inconel 718 tensile coupons printed using laser powder bed fusion AM. On-axis (fiber runs through the coupon’s center of axis) and off-axis (fiber is at 5° and 10° to the coupon’s center of axis) sensors were buried in epoxy resin inside narrow channels that run through the coupons. FBGs’ spectral evolutions …

Comparing Life-Cycle Dynamics Of Li-Ion Batteries (Libs) Clustered By Operating Conditions With Sindy, Kristen L. Hallas, Md Shahriar Forhad, Tamer Oraby, Benjamin Peters, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Lithium-ion batteries (LIBs) play a big part in the vision of a net-zero emission economy, yet it is commonly reported that only a small percentage of LIBs are recycled worldwide. An outstanding barrier to making recycling LIBs economical throughout the supply chain pertains to the uncertainty surrounding their remaining useful life (RUL). How do operating conditions impact initial useful life of the battery? We applied sparse identification of nonlinear dynamics method (SINDy) to understand the life-cycle dynamics of LIBs with respect to sensor data observed for current, voltage, internal resistance and temperature. A dataset of 124 commercial lithium iron phosphate/graphite …

Advanced Spatio-Temporal Froth Analysis Using Smart Soft Sensors In Mineral Processing, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Oumkeltoum Amar, Mohamed Chekroun, Oussama Hasidi, Oussama Lachihab

Manufacturing & Industrial Engineering Faculty Publications

In the transformative field of mineral processing, the need for innovative technologies to overcome inherent difficulties and a critical shortage of high-quality data is an acute challenge. This study addresses these pressing issues by leveraging advanced spatio-temporal deep learning techniques, specifically Convolutional Long Short-Term Memory (ConvLSTM). Focused on the Zinc flotation circuit at CMG Managem Group in Morocco, our comprehensive approach encompasses meticulous data collection from a real-world industrial setting, rigorous spatial and temporal analyses, practical and accurate data augmentation, and the development of a ConvLSTM model for precise prediction of mineral grades. By capturing the temporal intricacies of froth …

Hybrid Features Extraction For The Online Mineral Grades Determination In The Flotation Froth Using Deep Learning, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Abderrahmane Benhayoun, Oumkeltoum Amar, François Bourzeix, Karim Baïna, Mouhamed Cherkaoui, Oussama Hasidi

Manufacturing & Industrial Engineering Faculty Publications

The control of the froth flotation process in the mineral industry is a challenging task due to its multiple impacting parameters. Accurate and convenient examination of the concentrate grade is a crucial step in realizing effective and real-time control of the flotation process. The goal of this study is to employ image processing techniques and CNN-based features extraction combined with machine learning and deep learning to predict the elemental composition of minerals in the flotation froth. A real world dataset has been collected and preprocessed from a differential flotation circuit at the industrial flotation site based in Guemassa, Morocco. …

A Review On Additive Manufacturing For Aerospace Application, Radhika C, Ragavanantham Shanmugam, Monsuru Ramoni, Gnanavel Bk

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing, a cutting-edge technology often colloquially known as 3D printing, is a transformative process used to meticulously fabricate complex components by adding material layer upon layer. This revolutionary manufacturing method allows for precise control and customization, making it a go-to choice in various industries, from aerospace to healthcare. The adroitness of additive manufacturing in creating a complex geometry as a whole is very much harnessed by the aerospace Industry. Generating a component using additive manufacturing involves optimal design, methods, and processes. This review gives a broad knowledge in developing a part or product by choosing the appropriate design, method, …

A Simulation Model Analysis In The Us-Mexico Border, Carlo A. Zorola, Hiram Moya, Aditya Akundi

Manufacturing & Industrial Engineering Faculty Publications

Supply Chain (SC) is the flow of goods or services between supply and demand points. New or innovative strategies in SC have been researched and developed to deal with disruptive events, such as COVID-19, hurricanes, geopolitical, and even climate change. These challenges create supply imbalances, logistical challenges, and policy restrictions for transborder commerce. The DHS has implemented the Free and Secure Trade (FAST) program in both the US-Mexico and US-Canada border. These lanes are dedicated queues for commercial vehicles. In 2022, the government of Nuevo León, México, opened a dedicated lane just for Tesla´s northbound commercial traffic. There has been …

Artificial Intelligence For Enhanced Flotation Monitoring In The Mining Industry: A Convlstm-Based Approach, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Oumkeltoum Amar, Oussama Hasidi

Manufacturing & Industrial Engineering Faculty Publications

In the mining industry, accurate monitoring of the elemental composition in the flotation froth is crucial for efficient minerals separation. The hybrid deep learning algorithms offer powerful computational intelligence for real-time monitoring of froth quality in flotation processes. This soft sensor tool can provide valuable information for process control, including predictions of the elemental chemical composition. In this study, we propose a novel approach based on a Convolutional Long Short-Term Memory (ConvLSTM) neural network for real-time monitoring of chemical composition grades in flotation froth. The proposed model effectively extracts spatial and temporal patterns from video data, providing a better …

Numerical Study Of Solar Receiver Tube With Modified Surface Roughness For Enhanced And Selective Absorptivity In Concentrated Solar Power Tower, Shawn Hatcher, Mathew Z. Farias, Jianzhi Li, Peiwen Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

Concentrated solar power (CSP) is a reliable renewable energy source that is progressively lowering its cost of energy. However, the heat loss due to reflected and emitted radiation hinders the maximum achievable thermal efficiency for solar receiver tubes on the solar tower. Current solar selective coatings cannot withstand the high temperatures that come with state-of-the-art CSP towers often needing to be recoated soon after initial operation. We intend to use Inconel 718 with different additive manufacturing (AM) practices to construct surfaces that allow for more light-trapping to occur. By adjusting printing parameters, we can tailor a surface to allow for …