Open Access. Powered by Scholars. Published by Universities.®

Other Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 541 - 570 of 5086

Full-Text Articles in Other Mechanical Engineering

W22 Landing Gear And Door Uplocks Final Design Review (Fdr), Jason Szeto, Garrett Donovan, Christopher Edward, Kevin Lee Dec 2021

W22 Landing Gear And Door Uplocks Final Design Review (Fdr), Jason Szeto, Garrett Donovan, Christopher Edward, Kevin Lee

Mechanical Engineering

This Final Design Review report outlines the senior project sponsored by General Atomics Aeronautical Systems, Inc., to design an unmanned aerial vehicle landing gear uplock and door locks. The main goal of the project is to create a proof-of-concept uplock that does not operate on hydraulic power, has minimal moving parts, and can support the weight, vertical acceleration and aerodynamic loads on the landing gear or doors. The document covers the background research, design specifications, design selection process, justifications, manufacturing, and verification of the functional prototype.

Go to article

Compact In-Rack Dielectric Immersion Cooling System, Salvador Landeros Jr, Joshua M. Hannaman, Marshall D. Reid Dec 2021

Compact In-Rack Dielectric Immersion Cooling System, Salvador Landeros Jr, Joshua M. Hannaman, Marshall D. Reid

Mechanical Engineering

The Compact Dielectric Cooling team consisting of Josh Hannaman, Marshall Reid, and Salvador Landeros worked with Aria Technologies to create a thermal management system for data centers that can easily implement liquid cooling into current infrastructure for high density computing servers. The project was to design, build, and test a compact immersion cooling system for a senior project at California Polytechnic State University – San Luis Obispo. Immersion cooling is a liquid-cooling process that involves the immersion of electrical IT equipment and the removal of heat from the hot IT components using dielectric liquid. The goal was to build a …

Go to article

Quick - Release End Effector Tool Interface, Shane Farritor, Thomas Frederick Nov 2021

Quick - Release End Effector Tool Interface, Shane Farritor, Thomas Frederick

Department of Mechanical and Materials Engineering: Faculty Publications

The various embodiments herein relate to a coupling apparatus for a medical device having a coupler body, a cavity defined in the coupler body, a rotatable drive component disposed within the cavity and having at least two pin receiving openings, and an actuable locking ring disposed around the cavity.

Go to article

Experimental Verification On The Effectiveness Of Random Vibration Testing With Controlling Acceleration And Velocity Kurtosis, Daichi Nakai, Katsuhiko Saito Nov 2021

Experimental Verification On The Effectiveness Of Random Vibration Testing With Controlling Acceleration And Velocity Kurtosis, Daichi Nakai, Katsuhiko Saito

Journal of Applied Packaging Research

Random vibration tests for packages are conducted to confirm the safety of these packages during shipping. In our previous study, a method of generating the random vibration controlling the power spectral density and kurtosis of acceleration and the kurtosis of velocity was proposed. The aim of the present study is to verify the effectiveness of the proposed method. Three vibrations were generated in this study and compared with the real vibration, which replicates the truck bed. In the first case, control of the acceleration and velocity kurtosis was neglected. In the second case, the vibration controlling the acceleration kurtosis was …

Go to article

In Situ Characterization Of Tensile Behavior Of Laser Rapid Solidified Al–Si Heterogeneous Microstructures, Bingqiang Wei, Wenqian Wu, Dongyue Xie, Huai-Hsun Lien, Metin Kayitmazbatir, Amit Misra, Jian Wang Oct 2021

In Situ Characterization Of Tensile Behavior Of Laser Rapid Solidified Al–Si Heterogeneous Microstructures, Bingqiang Wei, Wenqian Wu, Dongyue Xie, Huai-Hsun Lien, Metin Kayitmazbatir, Amit Misra, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Heterogeneous Al–Si microstructure comprising of sub-micron-scale Al dendrites and nanoscale Al–Si fibrous eutectic was fabricated by processing as-cast Al-20wt.%Si alloy using laser rapid solidification. In situ tension tests explored high tensile strength ( ∼ 600 MPa) and ductility ( ∼ 10%) and high strain hardening rate ( ∼ 7 GPa). Microstructural characterization revealed the plastic co[1]deformation mechanisms between soft Al dendrites and hard nanoscale Al–Si eutectic. The progression of plasticity in nanoscale Al–Si eutectic with increasing applied strain is accommodated by dislocation plasticity in the nano-Al channels and cracking Si nanofibers. The propagation of nano-cracks is suppressed by surrounding Al, …

Go to article

Digitally Twinned Additive Manufacturing: Detecting Flaws In Laser Powder Bed Fusion By Combining Thermal Simulations With In-Situmeltpool Sensor Data, R Yavari, A Riensche, E Tekerek, L Jacquemetton, H Halliday, M Vandever, A Tenequer, V Perumal, A Kontsos, Z Smoqi, K Cole, P Rao Oct 2021

Digitally Twinned Additive Manufacturing: Detecting Flaws In Laser Powder Bed Fusion By Combining Thermal Simulations With In-Situmeltpool Sensor Data, R Yavari, A Riensche, E Tekerek, L Jacquemetton, H Halliday, M Vandever, A Tenequer, V Perumal, A Kontsos, Z Smoqi, K Cole, P Rao

Department of Mechanical and Materials Engineering: Faculty Publications

The goal of this research is the in-situ detection of flaw formation in metal parts made using the laser powder bed fusion (LPBF) additive manufacturing process. This is an important area of research, because, despite the considerable cost and time savings achieved, precision-driven industries, such as aerospace and biomedical, are reticent in using LPBF to make safety–critical parts due to tendency of the process to create flaws. Another emerging concern in LPBF, and additive manufacturing in general, is related to cyber security – malicious actors may tamper with the process or plant flaws inside a part to compromise its performance. …

Go to article

Dynamic Modeling Of Soft Robotic Dielectric Elastomer Actuator, Abdullah De Jesus El Atrache Ceballos Oct 2021

Dynamic Modeling Of Soft Robotic Dielectric Elastomer Actuator, Abdullah De Jesus El Atrache Ceballos

Doctoral Dissertations and Master's Theses

Dielectric elastomers actuators (DEAs) are among the preferred materials for developing lightweight, high compliance and energy efficient driven mechanisms for soft robots. Simple DEAs consist mostly of a homogeneous elastomeric materials that transduce electrical energy into mechanical deformation by means of electrostatic attraction forces from coated electrodes. Furthermore, stacking multiple single DEAs can escalate the total mechanical displacement performed by the actuator, such is the case of multilayer DEAs. The presented research proposes a model for the dynamical characterization of multilayer DEAs in the mechanical and electrical domain. The analytical model is derived by using free body diagrams and lumped …

Go to article

Justification Of The Main Parameters And Operating Modes Of The Crushers-Shredders Of Coarse Feed, K.D. Astanakulov, F.U. Karshiev, Sh.Kh. Gapparov Sep 2021

Justification Of The Main Parameters And Operating Modes Of The Crushers-Shredders Of Coarse Feed, K.D. Astanakulov, F.U. Karshiev, Sh.Kh. Gapparov

Irrigation and Melioration

The article presents the results of research on the justification of the parameters of the working bodies and operating modes of the mini crushers-shredders of coarse feed. On the basis of experimental research to study the effect of the rotor parameters Mini Crusher its qualitative performance indicators. According to the teachings found that rational parametres and operating modes-Crusher are: rotor length 350 mm; rotor diameter 550 mm; rotor speed 1290 min-1; the number of hammers 20 pcs; angle of rotation of the hammers 60.

Go to article

Plan Dimensions Of The Flow Confinited By Cross Dams, On Rivers With Non-Symmetric Flooring, M.R. Bakiev, U.A. Kahhorov, A.А. Jakhonov Sep 2021

Plan Dimensions Of The Flow Confinited By Cross Dams, On Rivers With Non-Symmetric Flooring, M.R. Bakiev, U.A. Kahhorov, A.А. Jakhonov

Irrigation and Melioration

Improving methods and technologies for calculating and designing floodplain transverse dams, taking into account the interaction of floodplain and riverbed flows to protect the banks from erosion and regulate riverbeds is one of the most important tasks. At the same time, the priority remains the transverse blind dams made of local soil with the attachment of their head. Their construction on rivers with two-sided asymmetric floodplains has its own characteristics, which consist in the need to take into account the morphology, the different roughness of the floodplain and the channel, the interaction of floodplain and channel flows, the asymmetry of …

Go to article

Study Of Performance Of Vertical Drainage Well Construction From Polymer Materials, I.A. Akhmedov, Z.K. Mirkhasilova Sep 2021

Study Of Performance Of Vertical Drainage Well Construction From Polymer Materials, I.A. Akhmedov, Z.K. Mirkhasilova

Irrigation and Melioration

The article is devoted to the reconstruction and construction of vertical drainage wells. The use of vertical drainage wells is characterized by a decrease in the level of groundwater. The article presents data and typical regions of the use of vertical drainage wells.Also presented are mechanical, physical and chemical methods of well cleaning in practice. The information on the design and construction of vertical drainage wells is described. The analysis of corrosion resistance of vertical drainage well materials and their service life has been carried out. It is known that polymeric materials are resistant to corrosive environments. Using filters made …

Go to article

Results Of Software Modeling Flow Section Of Vane Pumps, О.Я. Гловацкий, R.R. Ergashev, A.A. Abdullaev, J.I. Rashidov Sep 2021

Results Of Software Modeling Flow Section Of Vane Pumps, О.Я. Гловацкий, R.R. Ergashev, A.A. Abdullaev, J.I. Rashidov

Irrigation and Melioration

The article presents an analysis of data on the flow movement in a centrifugal pump, the results of which are aimed at improving the pump design in the direction of ensuring the flow of the flow without resistance to achieve energy savings in water transmission. To reduce slip on the pumps and to reduce the resistance to current flowing inside the pump to achieve energy savings, working impeller and spiral chamber shape are designed to be constructively correct. Data from pumping stations show that the performance of pumping equipment reduces water consumption by 10-12%, pressure by 18-20% and service life …

Go to article

Economic Assessment Of A New Energy-Saving Electrical Technology For The Anesthesia Of Silkworms, O.A. Khaliknazarov, A.A. Turdiboev, D.M. Akbarov, D.M. Akbarov Sep 2021

Economic Assessment Of A New Energy-Saving Electrical Technology For The Anesthesia Of Silkworms, O.A. Khaliknazarov, A.A. Turdiboev, D.M. Akbarov, D.M. Akbarov

Irrigation and Melioration

The article provides information on the role of Uzbekistan in the world in the field of cocoons, the analysis of cocoon cultivation and primary processing technologies, technologies and technical devices currently used in primary cocoon processing. Suggestion of the use of ultra-high frequency (UV) electromagnetic field in the anesthesia of mulberry silkworm, technical specifications of the electrotechnical device for anesthesia of mulberry silkworm using ultra-high frequency (UV) electromagnetic field, and the implementation of this device SK-150K pilons The cost-effectiveness of the device was assessed, the cost-effective method achieved as a result of the research work is highlighted. According to the …

Go to article

Main Directions Of Food Security In Uzbekistan (The Case Of Samarkand Province), F.J. Saydullaeva Sep 2021

Main Directions Of Food Security In Uzbekistan (The Case Of Samarkand Province), F.J. Saydullaeva

Irrigation and Melioration

The article assesses food availability as one of the indicators of food security on the example of Samarkand region based on a comparative analysis of the state of agricultural food production over the years and the volume of products per capita and their compliance with established recommended consumption norms. Based on the analysis, the results show that in Samarkand region in 2016-2020, agricultural food products were produced over recommended consumption norms per capita. The periodic evolution of the types of agri-food products produced by dehkan farms and owners of household land increased by 7.1% decreased by 7.3% on private farmers. …

Go to article

The Economic Assessment Of Factors Affecting Small Household(Tomorka) In Rural Areas And Their Income, Sh.A. Muratov Sep 2021

The Economic Assessment Of Factors Affecting Small Household(Tomorka) In Rural Areas And Their Income, Sh.A. Muratov

Irrigation and Melioration

In this research, the role and importance of income from small householding(tomorka) in rural areas, its specific features are analyzed. Economic factors were assessed through the tobit regression model of the factors influencing the formation of income from small households (tomorka) activities, and VIF (Variance inflation factor) test was conducted to determine their multicollinearity. Anonymous surveys of 170 landowners in 4 districts of Samarkand region have been used in the analysis. The age of landowners, the area of arable land, the consumption of organic and mineral fertilizers, the cost of seeds and seedlings, the cost of preparing the field for …

Go to article

Testing And Characterization Of Polymer Laminates For Swelling, Absorption, And Cracking, Matthew W. Carlson Sep 2021

Testing And Characterization Of Polymer Laminates For Swelling, Absorption, And Cracking, Matthew W. Carlson

Master's Theses

A polymer laminate consisting of multiple layers of proprietary blends of Ethylene Vinyl Alcohol (EVOH) and Thermoplastic Polyurethane (TPU) and used in the construction of air bladders was evaluated for hygroscopic effects driving delamination and multiple layer fragmentation. These air bladders are observed to suffer delamination during a manufacturing process that involves immersion in an alcohol/water solution. A plausible underlying mechanism is differential swelling and absorption by the laminate constituents. Both room and elevated temperature swelling tests were carried out to find the absorption and swelling coefficients of the constituents. These coefficients served as input into a Finite Element Analysis …

Go to article

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu Aug 2021

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Contact angle is an important property to quantify the wettability of a solid surface with a liquid, which characterizes interactions of the solid-liquid pair. Generally, to measure contact angle, special instruments such as a goniometer are necessary, but they are not readily available in certain research settings. In this study, an alternative method to measure contact angle based on a Hele-Shaw cell, microscopy imaging, and image processing is suggested. In this method, a liquid drop is injected into a transparent Hele-Shaw cell, the meniscus of the drop is captured in the top or bottom view using a brightfield microscope, and …

Go to article

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu Aug 2021

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Contact angle is an important property to quantify the wettability of a solid surface with a liquid, which characterizes interactions of the solid-liquid pair. Generally, to measure contact angle, special instruments such as a goniometer are necessary, but they are not readily available in certain research settings. In this study, an alternative method to measure contact angle based on a Hele-Shaw cell, microscopy imaging, and image processing is suggested. In this method, a liquid drop is injected into a transparent Hele-Shaw cell, the meniscus of the drop is captured in the top or bottom view using a brightfield microscope, and …

Go to article

Electrical Characterization Of Phytoplankton Suspensions Using Impedance Spectroscopy., Margaret R Jett Aug 2021

Electrical Characterization Of Phytoplankton Suspensions Using Impedance Spectroscopy., Margaret R Jett

Electronic Theses and Dissertations

Phytoplankton are closely monitored because of their important environmental role, and the impacts they have on their local ecosystems. Some phytoplankton respond to stress by producing lipids, which can be harvested for biofuels and other chemicals. Microfluidic devices have been important in improving the portability and throughput of phytoplankton characterization methods, increasing their potential for in situ use. This study utilized a small sample of phytoplankton suspended in a stagnant medium and measured the impedance response using a lab-on-chip and impedance analyzer. The individual cell characteristics were derived from the impedance response of the group. The goal was to characterize …

Go to article

Methods , Systems , And Devices Relating To Surgical End Effectors, Shane M. Farritor, Thomas Frederick, Joe Bartels Jul 2021

Methods , Systems , And Devices Relating To Surgical End Effectors, Shane M. Farritor, Thomas Frederick, Joe Bartels

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components , including components that can be incorporated into robotic and / or in vivo medical devices, and more specifically including end effectors that can be incorporated into such devices. Certain end effector embodiments include various vessel cautery devices that have rotational movement as well as cautery and cutting functions while maintaining a relatively compact structure. Other end effector embodiments include various end effector devices that have more than one end effector.

Go to article

Reduced-Order Modeling Of Loosening In Bolted Joints And Dynamic Interactions Between Axially Aligned Threaded Joints, Sandro Aldana Jul 2021

Reduced-Order Modeling Of Loosening In Bolted Joints And Dynamic Interactions Between Axially Aligned Threaded Joints, Sandro Aldana

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Maintaining effective preload in bolted joints is critical for ensuring long-term performance and safety throughout the operation of any assembled structure. The loosening of bolted joints has been studied since the Industrial Revolution, but modeling approaches have only emerged over the past three decades. Although existing approaches are capable of simulating or predicting loosening in a single joint consisting of a single bolt, they are too computationally expensive to be used to model loosening in large structures consisting of many bolts. The objective of this thesis is to construct and employ a reduced-order modeling (ROM) approach that treats the internal …

Go to article

Robotic Surgical Devices , Systems , And Related Methods, Shane Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, Yutaka Tsutano Jul 2021

Robotic Surgical Devices , Systems , And Related Methods, Shane Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, Yutaka Tsutano

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components, including components that can be incorporated into robotic and / or in vivo medical devices. Certain embodiments include various modular medical devices for in vivo medical procedures.

Go to article

In Vivo Printing Of Growth Factor-Eluting Adhesive Scaffolds Improves Wound Healing, Kristo Nuutila, Mohamadmahdi Samandari, Yori Endo, Yuteng Zhang, Jacob Quint, Tannin A. Schmidt, Ali Tamayol, Indranil Sinha Jul 2021

In Vivo Printing Of Growth Factor-Eluting Adhesive Scaffolds Improves Wound Healing, Kristo Nuutila, Mohamadmahdi Samandari, Yori Endo, Yuteng Zhang, Jacob Quint, Tannin A. Schmidt, Ali Tamayol, Indranil Sinha

Department of Mechanical and Materials Engineering: Faculty Publications

Acute and chronic wounds affect millions of people around the world, imposing a growing financial burden on patients and hospitals. Despite the application of current wound management strategies, the physiological healing process is disrupted in many cases, resulting in impaired wound healing. Therefore, more efficient and easy-to-use treatment modalities are needed. In this study, we demonstrate the benefit of in vivo printed, growth factor-eluting adhesive scaffolds for the treatment of full-thickness wounds in a porcine model. A custom-made handheld printer is implemented to finely print gelatin-methacryloyl (GelMA) hydrogel containing vascular endothelial growth factor (VEGF) into the wounds. In vitro and …

Go to article

Optimization Of 3d Printed Mold Performance For Injection Molding Via Hollow Infill Patterns, Alan Fong Jul 2021

Optimization Of 3d Printed Mold Performance For Injection Molding Via Hollow Infill Patterns, Alan Fong

University Honors Theses

The applicability of hollow infill patterns has been explored for its applications in making 3D printed polymer-based injection molds in the additive manufacturing industry. Hollow infill patterns offer a significant reduction in material costs as well as the opportunity for reducing the cooling times via pumping a coolant fluid through the hollow cavity in a similar fashion to traditional conformal cooling channels. A 3D Jacks Support Hollow mold model was determined to be the best performing design. FEA analysis was conducted to determine the maximum reduction in internal volume (percentage of material saved) that could be achieved without exceeding the …

Go to article

Impact Of Regional Climate Changes On Changes In River Water Content In Uzbekistan, A.T. Salokhiddinov, P.A. Khakimova, R.V. Toryanniova, O.A. Ashirova, A.G. Gofurov Jun 2021

Impact Of Regional Climate Changes On Changes In River Water Content In Uzbekistan, A.T. Salokhiddinov, P.A. Khakimova, R.V. Toryanniova, O.A. Ashirova, A.G. Gofurov

Irrigation and Melioration

The paper presents the research results on the analysis of the climate change impacts on the potential of water resources in Central Asia. We analyzed the materials of an extensive database of monitoring data from numerous gauge stations on different river basins and satellite data information. A quantitative assessment of the transformation of river hydrographs, the growth of flow variability in the Republic of Uzbekistan's major rivers, in connection with climate change, was performed. The specific features of the impact of climate changes on changes in the water content of rivers in Uzbekistan in large and small river basins are …

Go to article

Washing Technology For Medium And Highly Saline Soils, B.K. Saliev, M. S. Yuldashev, N.O. Shaimanov Jun 2021

Washing Technology For Medium And Highly Saline Soils, B.K. Saliev, M. S. Yuldashev, N.O. Shaimanov

Irrigation and Melioration

The article discusses the issues of conducting field experiments to assess the reclamation conditions of soils, which are a particular issue of managing salinity and water-salt regime, as well as increasing the efficiency of desalination. Today, 46.6% of the irrigated lands of the Republic of Uzbekistan have salinization of varying degrees, of which 30.9% are weak, 13.3% are moderate and 2.5% are highly saline. Medium and highly saline lands make up 15.8%. The essence of the proposed method of flushing from the traditional one is that in late autumn or winter, the collectors-ditches are closed, and the groundwater is artificially …

Go to article

Distribution Of Calcium And Its Reserve Forms In Widespread Irrigated Gray Meadow Soils Of The Syrdarya Region, A. Akhatov Jun 2021

Distribution Of Calcium And Its Reserve Forms In Widespread Irrigated Gray Meadow Soils Of The Syrdarya Region, A. Akhatov

Irrigation and Melioration

The article examines the uneven distribution of calcium in reserve (general, potential, close and labile) forms in irrigated and gray-earth-meadow soils of the experimental section of the NIISSAVKH of the Gulistan district of the Syrdarya region and the farms "Sokhil" and "Ak altin" in irrigated meadow soils the form of a close reserve in the soil profile is 310 mg per 100 gr of soil. The upper layer of highly saline, medium loamy soil gradually decreases at a depth of 60-76 cm. layer. The labile calcium reserve in irrigated serozem-meadow, highly saline, medium loamy soils varies from 175 to 260 …

Go to article

Design Of A Channel Straightening Route Using A Combined Dam With A Through Part Made Of Tetrahedra, M.R. Bakiev, A.B. Хаlimbetov, С.Э. Шукурова, I.J. Asamatdinov Jun 2021

Design Of A Channel Straightening Route Using A Combined Dam With A Through Part Made Of Tetrahedra, M.R. Bakiev, A.B. Хаlimbetov, С.Э. Шукурова, I.J. Asamatdinov

Irrigation and Melioration

The design of the route when regulating riverbeds, the direction of the flow to the point of water intake will require solving some issues, including the amount of deviation of the dynamic axis of the flow, constrained by regulatory structures. The main purpose of this work is to develop a method for calculating the deviation of the dynamic axis of a flow that is one-way constrained by a combined dam, then through part of which is made of tetrahedra. The problem is realized using the Varignon theorem and the flow conservation equation written for the streamlines where the household state …

Go to article

Improvement Of Informational-Methodological Provision On Foreign Languages For Teachers, G. Eshchanova Jun 2021

Improvement Of Informational-Methodological Provision On Foreign Languages For Teachers, G. Eshchanova

Irrigation and Melioration

The article discusses the innovative areas of activity, related to the use of information and communication technologies in the educational process of teachers in foreign languages in the world practice, the development of teachers professional communicative competence in teaching English, the use of information and communication, advanced pedagogical technologies in teaching to ensure the solution of such issues, as the increase in the level of development of foreign language skills, diagnostic technologies among teachers.

Go to article

Дождеваsome Aspects Of Water Management In The Republic Of Uzbekistan During The Period Of Independence (Reality And Forecast), S. Khodjaev Jun 2021

Дождеваsome Aspects Of Water Management In The Republic Of Uzbekistan During The Period Of Independence (Reality And Forecast), S. Khodjaev

Irrigation and Melioration

To date, there is no alternative to the introduction of the principles of integrated water resources management (IWRM), this is proved by the research of SIC ICWC on the territory of the South Fergana main canal, where the specific water supply per hectare of irrigated area has been reduced by 32% on an area of 120 thousand hectares, that is up to 7 thousand m³/ha, instead of the limited ones 10 thousand m³/ha. Researches recommend cutting off all types of collector-drainage waters (CDW) from the river trunks of the Aral Sea basin, including the Syr-Darya and Amu-Darya, since CDW are …

Go to article

The Influence Of Gender Approaches On Education Efficiency, G. Eshchanova Jun 2021

The Influence Of Gender Approaches On Education Efficiency, G. Eshchanova

Irrigation and Melioration

The given article covers the influence of gender approaches on education efficiency on the basis of statistical and scientific data, and the need to rely on the basis of the necessary knowledge for the ecologically sustainable development of women's knowledge, competence and entrepreneurship are shown. The educational process based on Gender differences and equality contributes significantly to the development of society.

Go to article

First Prev Next Last