Other Mechanical Engineering Commons^™

Ellie - Exteroceptive Light Locomotion In Eukaryote-Fungi, Brandon Etwarroo

Doctoral Dissertations and Master's Theses

Over the past decade, fungal research and its technological applications have expanded across multiple disciplines, including the emerging field of biohybrid systems. This thesis develops and evaluates a wireless, untethered mobile robot controlled by the action potential-like activity generated by Pleurotus ostreatus sporocarps under red, green, and blue optical stimulation. Light is applied to the sporocarps, the resulting electrical responses are recorded, and these signals are transmitted wirelessly to actuate the mobile robot. Both the action potential-like activity patterns and the robot’s movement trajectories were analyzed. The results demonstrate that wireless robotic control mediated by fungal electrophysiology is feasible. Overall, …

Teleoperated Robotic Arm With Vision-Based Imitation Learning, Favour E. Emmanuel, Hunter J. Donahue

Williams Honors College, Honors Research Projects

This report presents the design, development, and deployment of a teleoperated robotic arm system capable of vision-based imitation learning. The system uses a leader-follower architecture with myArm C650 and myArm M750 robots manufactured by Elephant Robotics. The leader arm movement is controlled by the operator, whereas the follower performs actions acquired from demonstrations. Data collection included synchronized joint-angle recording and multi- camera video streams capturing human demonstrations.

These demonstrations were processed with a deep learning imitation algorithm called Action Chunking with Transformers (ACT). The main capability of this algorithm is its ability to make future action predictions based solely on …

Integration And Testing Of A Quadruped Robot With Ros2, Jeremy S. West

Master's Theses

The Cal Poly Legged Robotics Group has been developing research and teaching platforms for agile legged robotics since 2020. These platforms are expected to provide students with opportunities to develop complete legged-robot systems from low-level control to advanced robotics tasks such as motion planning and decision making. However, the current prototyped quadruped robot lacked the software and sensing capabilities for high-level quadrupedal gaits and advanced robotic research.

To address these challenges, this project developed Switch, a robotic platform that builds upon the previous BRUCE platform with significant hardware and software upgrades. Switch features a modular design that allows individual software …

Advances Towards A Robotic Management Vehicle Suited To Nurse Row Crops To More Efficient Outcomes, Adam Mk Gronewold

Dartmouth College Ph.D Dissertations

Enhancing agricultural production while reducing input costs remains a central challenge in modern row-crop management. Recent advances in computation, imagery, and sensors are enabling more efficient practices across various agricultural domains, and automation technologies are increasingly available to manage tasks central to perennial crop development. Automation in row-crop agriculture, by contrast, lags behind. This thesis explores utilizing small, unmanned ground vehicles to transform row cropping through the implementation of unconventional, in-season management strategies. The first focus of this work considers improvements to nitrogen fertilization using small, autonomous vehicles. An agronomy experiment in corn assessed the effects of gradually applying nitrogen …

Dynamically Scaling Biomimetic Robots Through Parallel Viscoelastic Actuators, Foster Olaf Holmquist

Graduate Theses, Dissertations, and Problem Reports (ETD)

Robots provide a unique proving ground for testing scientists’ understanding of neuromuscular systems. Synergistically, mimicking biological control laws and mechanics could offer robotics the robust and adaptive locomotion of animals. Previous work has utilized the wealth of research on insect biomechanics to develop scaled robotic models but doing so presented a problem: while these robots’ larger scale has simplified manufacturing, the scale has also shifted its mechanics from those of the modeled organisms. While animals walk, forces are generated that describe their mechanics and influence motor control. The musculoskeletal structure and stretch of muscles result in viscous and elastic forces, …

Pseudo Gps For Romi, Emmanuel Baez, Owen Guinane, Gabriel Coria, Conor Schott

Mechanical Engineering

The Pseudo-GPS system for Romi robots addresses the need for precise real-time location tracking in Cal Poly's Mechatronics lab. This project, developed by Emmanuel Baez, Gabriel Coria, Owen Guinane, and Conor Schott, under the guidance of instructor Charlie Refvem, provides a proof-of-concept system to enhance the Romi robots' geolocation capabilities for advanced robotic algorithms.

The proposed system uses a Raspberry Pi 4 equipped with a Pi camera module and ArUco markers to track the position and orientation of Romi robots within a lab environment. Custom 3D-printed stands secure markers on the robots, and a designated origin marker defines the coordinate …

Reflections Of Undergraduate Engineering Students Completing A Cross Disciplinary Robotics Project With Pre-Service Teachers And Fifth Graders In An Electromechanical Systems Course, Krishnanand Kaipa, Jennifer Kidd, Isaac Koduah Kumi, Stacie I. Ringleb, Orlando M. Ayala, Kristie Gutierrez, Francisco Cima, Danielle Marie Rhemer

Mechanical & Aerospace Engineering Faculty Publications

Engineering is becoming increasingly cross-disciplinary, requiring students to develop skills in multiple engineering disciplines (e.g., mechanical engineering students having to learn the basics of electronics, instrumentation, and coding) and interprofessional skills to integrate perspectives from people outside their field. In the workplace, engineering teams are frequently multidisciplinary, and often, people from outside of engineering are part of the team that brings a product to market. Additionally, teams are often diverse in age, race, gender, and in other areas. Teams that creatively utilize the contrasting perspectives and ideas arising from these differences can positively affect team performance and generate solutions effective …

Path Planning Development Framework For Mobile Robots, Lauren-Ann Elizabeth Graham

Theses and Dissertations

Planetary exploration relies on methods of path planning to achieve autonomous navigation in hazardous environments. Simulating harsh terrain, real-time varying physics, and robotics applications is vital for testing control algorithms here on Earth. Robotics Operating System (ROS) is a set of software libraries and tools that allow you to build and simulate robotic applications. Utilizing ROS, Gazebo, and Blender, a rough terrain simulation framework is created to explore and compare path planning algorithms using various desired robots and maps. ROS supports multiple path planning algorithms given its open-source abilities. This research focuses on path planning implementation of Proportional-Integral-Derivative (PID) control …

Dynamic Analysis, Characterization, And Design Of Rigid-Flex Pcb Robotics, John Bell

All Dissertations

The era of space exploration is driven by and fuels large advances in technological progress.
Over the last decade, engineering practices for spacecraft, space structures, robotics, software and
hardware, manufacturing techniques, and the implementation of new and novel materials has been
revolutionized. Space exploration pushes the envelope in terms of technological capabilities and
robotic systems (rovers) become lighter, smaller, and more capable of sustaining damage. This
dissertation aids in the advancement of design knowledge for a class of rovers characterized by
their chassis architecture: rigid-flex printed circuit board (PCB) robotics. These rovers leverage
the printed circuit cards as the structural …

System Integration Of C-Arm Robotic Prototype Using Motion Capture Guidance For Accurate Repositioning, Alireza Yazdanshenas

Mechanical Engineering Theses

One of the important surgical tools in spinal surgery is the C-Arm X-ray System. The C-Arm is a large “C” shaped and manually maneuvered arm that provides surgeons and X-ray technicians the ability to take quick quality X-rays during surgery. Because of its five degrees of freedom, the C-Arm can be manually maneuvered around the patient to provide many angles and perspectives, ensuring surgical success.

This system works fine for most surgical procedures but falls short when the C-Arm must be moved out of the way for complicated surgical procedures.

The aim of this thesis is to develop an accurate …

Analysis And Control Of Fiber-Reinforced Elastomeric Enclosures (Frees), Soheil Habibian

Master’s Theses

While rigid robots are extensively used in various applications, they are limited in the tasks they can perform and can be unsafe in close human-robot interactions. Soft robots on the other hand surpass the capabilities of rigid robots in several ways, such as compatibility with the work environments, degrees of freedom, manufacturing costs, and safe interactions with the environment. This thesis studies the behavior of Fiber-Reinforced Elastomeric Enclosures (FREEs) as a particular type of soft pneumatic actuator that can be used in soft manipulators. A dynamic lumped-parameter model is created to simulate the motion of a single FREE under various …

Remotely Controlled Industrial Robotic Arm And Simulation Of Automated Thermal Furnace, Prince Mehandi Ratta

Dissertations, Master's Theses and Master's Reports

The right execution of controllers ensures the correct analysis of information, generating efficient results and better optimizing the system. In this report, two controllers were designed. Firstly, a remotely controlled robotic arm, since there are no such type commercially available controllers. Moreover, robotic platforms are costly, so students and researchers are often unable to learn the concepts of programming industrial robots. This project makes a non-destructive, remotely-controlled robotic arm to better teach students and researchers about programming and control of robotic arms. Secondly, simulation of an automated thermal furnace for ArcelorMittal on SIMULINK, which is used for the annealing process …

Robotic Mining Digging Core, John Stefan, Ryan Weir

Williams Honors College, Honors Research Projects

The purpose of this design project is to design a digging core for a lunar robot that will collect large amounts of material buried beneath the surface of Mars so one day, astronauts can use those resources. This lunar robot will be competing in the NASA Robotic Mining Competition, where teams from universities around the country display and test their designs. This design must adhere to a newly implemented rule which states that the amount of gravel a robot collects will determine the team score. The layer of gravel is located underneath a layer of Regolith, which simulates the surface …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Design And Implementation Of The Kinect Controlled Electro-Mechanical Skeleton (K.C.E.M.S), Jason Richard Ekelmann

Doctoral Dissertations and Master's Theses

Mimicking real-time human motion with a low cost solution has been an extremely difficult task in the past but with the release of the Microsoft Kinect motion capture system, this problem has been simplified. This thesis discusses the feasibility and design behind a simple robotic skeleton that utilizes the Kinect to mimic human movements in near real-time. The goal of this project is to construct a 1/3-scale model of a robotically enhanced skeleton and demonstrate the abilities of the Kinect as a tool for human movement mimicry. The resulting robot was able to mimic many human movements but was mechanically …

In Vivo Laparoscopic Robotics, Mark E. Rentschler, Stephen R. Platt, Jason Dumpert, Shane M. Farritor, Dmitry Oleynikov

Department of Mechanical and Materials Engineering: Faculty Publications

Robotic laparoscopic surgery is evolving to include in vivo robotic assistants. The impetus for the development of this technology is to provide surgeons with additional viewpoints and unconstrained manipulators that improve safety and reduce patient trauma. A family of these robots have been developed to provide vision and task assistance. Fixed-base and mobile robots have been designed and tested in animal models with much success. A cholecystectomy, prostatectomy, and nephrectomy have all been performed with the assistance of these robots. These early successful tests show how in vivo laparoscopic robotics may be part of the next advancement in surgical technology.