Other Mechanical Engineering Commons^™

Integrated Solar And Regenerative Braking System For Off-Grid Charging Of An Electric Motorcycle, Christian Soolany, Dhimas Oki Permata Aji, Sigit Suwarto, Setya Permana Sutisna, Furqon Furqon

Journal of Mechanical Engineering Science and Technology (JMEST)

This study introduces an off-grid charging system developed for a modified 110 cc electric motorcycle. The system incorporates a portable photovoltaic (PV) array and a regenerative braking feature, aimed at improving the motorcycle's energy efficiency. The setup includes a 72 V, 20 Ah lithium-ion battery, a 240 Wp portable PV array, and a 2 kW Brushless DC (BLDC) motor with regenerative braking to enhance the energy available on board. From the experiments, the vehicle demonstrated an average energy consumption of 44.9 Wh/km and achieved a range of about 32 km per charge. The PV system generated between 200 and 270 …

A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause

Journal of Materials Exploration and Findings

The present work focuses on the study of the effect of adding different weight percentages and particle sizes of various metal chips to foundry sand on the tensile strength of aluminum alloy castings, utilizing Taguchi's optimization methodology and regression analysis. Characterization techniques such as X-ray fluorescence (XRF), thermogravimetry, and SEM were also used. The XRF analysis identified aluminum (76.61%), silicon (17.49%), and magnesium (1.28%) as the major elements in the aluminum alloy engine block. For the foundry sand, silicon (89.51%), phosphorus (7.41%), and potassium (1.7%) were found. In contrast, the major constituents in cast iron included iron (88.3%), carbon (3.7%), …

A Review Of Energy Storage Technologies With Hydro Energy System Design For Off-Grid Electricity, Daniel H. Ngoma, Banet L. Masenga

Tanzania Journal of Engineering and Technology (TJET)

Many renewable energy sources such hydropower—particularly small-scale run-of-river and micro-hydro—offers reliable, low-cost generation. However, their inherent intermittency (due to seasonal flow variations) and inability to instantly match demand necessitate integrated energy storage to ensure a stable, continuous power supply. This review synthesizes contemporary energy storage technologies in the context of their integration with off-grid hydro energy system design.

The study examine a spectrum of storage solutions, evaluating their technical characteristics, costs, and suitability for hybrid hydro applications. Pumped Hydro Storage (PHS), while highly efficient and large-scale, is often geographically constrained and capital-intensive for small off-grid projects. Battery Energy Storage Systems …

Experiential Learning And The Revitalization Of Manufacturing Education At The University Of Dayton, Sean Cahill

Research and Reflection on Learning and Teaching in Higher Education

This perspective paper explores the role of experiential learning in preparing future-ready manufacturing engineers at the University of Dayton, set against the backdrop of Dayton’s legacy as an industrial innovator and the broader national movement to revitalize domestic manufacturing. As automation, cyber-physical systems, and Industry 4.0 technologies reshape the manufacturing landscape, there is a growing need for engineers who possess both technical fluency and systems-thinking capabilities. To meet this need, the manufacturing engineering technology department implemented hands-on, integrated lab-and-lecture modules through support from the Experiential Learning Innovation Fund for Faculty (ELIFF). Grounded in Kolb’s Experiential Learning Theory and constructivist learning …

Computational Fluid Dynamics (Cfd) Modeling For Bio-Inspired Aerodynamic Optimization In Autonomous Drones, Hyginus C.O. Unegbu, Danjuma Saleh Yawas

Makara Journal of Technology

This study explores the aerodynamic benefits of bio-inspired design modifications for autonomous drones using advanced Computational Fluid Dynamics (CFD) simulations. Four bio-inspired configurations—leading-edge serrations, winglets, riblet surfaces, and curved wings—were assessed and compared against a baseline drone model to evaluate their impact on aerodynamic performance. The results indicated that all bio-inspired designs significantly enhanced lift, reduced drag, and improved overall aerodynamic efficiency. The leading-edge serration configuration achieved the highest performance gains, with a 33.6% increase in maximum lift coefficient (CL) and a 29.5% improvement in lift-to-drag ratio (CL/CD), primarily due to delayed flow separation and reduced turbulence. Winglets minimized wingtip …

Implementation Of Reliability Centered Maintenance On Crude Booster Pump, Dzulfikar Ali Hafizh, Maya Agustianingrum Putri St., Ph.D., D. Rizal, Adzra Qanita

Journal of Materials Exploration and Findings

Crude oil booster pump is one of the critical equipment in oil refinery operations. In aging plants that have been operating for more than 25 years, where reliability and maintenance issues on equipment often cause operational disruptions and even unplanned shutdowns. This study aims to develop a structured reliability-centered maintenance (RCM) strategy for crsude oil booster pump systems that is also in line with the principles of asset integrity management system (AIMS). This methodology follows the RCM II approach, starting with system function analysis, failure mode identification, and criticality assessment through Failure Mode, Effect, and Criticality Analysis (FMECA) to determine …

An Engineering Solution For Fan Aeroacoustics Measurements Correction In A Non-Anechoic Testing Environment, Saad-Eldin Taha, Mohamed Y.Zakaria, Mohamed Abdelgaied, M.M. Bassuoni Prof. Dr.

Journal of Engineering Research

Abstract- Nowadays, acoustic signatures of daily used applications are to be minimized. The study of noise generated through aerodynamic interaction with moving bodies has passed through different phases since the early 50s, and this leads to the evolvement of many analytical, empirical and computational techniques in order to be able to estimate the emitted noise. Concerning fan blades, until now the researches are still going for a reliable method for noise estimation during the early phases of design which help in the development of blades with a lower aeroacoustic signature, the Brooks, Pope and Marcolini (BPM) model was chosen to …

An Eulerian-Pfem Approach To Model Transient Capillary Forces On Moving Contact Lines Of Spreading Liquid Drops: Applications In Hydraulic And Fluid Dynamics, Elaf N. Mahrous, Syed Yousufuddin, Muhammad Saleem Professor, Mohammed N. Iqbal, Muhammad T. Bin-Saleem

Journal of Engineering Research

This study addresses the complexities of simulating multiphase flows, particularly the dynamics of droplet behaviour on solid substrates, which are influenced by intricate capillary interactions. Despite advancements in fixed-grid and moving-grid methodologies, there remains a critical gap in accurately modelling transient phenomena and dissipative forces at the solid-liquid interface. We introduce a novel Eulerian-particle finite element method (PFEM) framework that captures the transient capillary forces associated with the movement of contact lines in liquid droplet spreading scenarios. Through a numerical assessment of three established dissipative force models—Jiang’s, Bracke’s, and Seeberg’s we identify Jiang's model as the most effective and stable …

Enhancing Gas Cyclone Performance With Exit Diffusers, Omar Mohamed Mourad Dwidar, Yasser El-Shaer, Khairy Elsayed, Seyyed Hossein Hosseini, Goodarz Ahmadi

Journal of Engineering Research

This study evaluates seven cyclone designs to enhance pressure drop and collection efficiency (CE), using the conventional cyclone as a baseline. While the conventional design is efficient in particle collection, it experiences significant energy losses due to high values of pressure drops. This study introduces exit diffusers with various configurations—A, B, C, D, E, and F—to improve cyclone performance. Computational Fluid Dynamics (CFD) simulations were used to analyse the pressure drop, tangential velocity, and static pressure at different levels of each cyclone. The findings reveal that cyclone D achieves a 41.1% reduction in pressure drop but at the cost …

The Effect Of Hot Machining Of Difficult-To-Machine Materials On The Form Accuracy In The Turning Process, Ahmed Yehia Kamal, Samy F. M. Assal, Ahmed M. El-Kassas, Ahmed A. Hawam

Journal of Engineering Research

Form accuracy of machined parts is crucial to the interchangeability in production as well as the function of the part and its expected useful life. Numerous studies investigated the form accuracy in traditional machining operations but none of them considered this issue in hot machining. In this technique, a difficult-to-machine workpiece is preheated to soften its material and reduce the cutting force. In this paper, the form accuracy represented in roundness, tape, and straightness of hot turned AISI 304L parts are investigated. The results showed that the hot condition has a minimal effect on the form accuracy which confirms the …

Numerical Simulation Of Airflow Properties Of The Naca 6420 Airfoil Using The Transition Rans K-Ε Model, Oluwaseyi O. Alabi, Saidat A. Salisu, Oyeyemi T. Aforolagba -Balogun, Temitope A. Ladigbolu, Ayotunde O. Fasina, Anas Bala

Al-Bahir

This study investigates the airflow properties around the airfoil using numerical simulation, addressing the longstanding challenge of accurately predicting transition phenomena in turbulent flows. The importance of this research lies in its potential to improve the design and performance of airfoils in various engineering applications, such as wind turbines, and aircraft. A custom 2-dimensional airfoil model was created using Airfoil instruments, featuring a 6% maximum curvature, 40% curvature position, and 20% thickness. COMSOL Multiphysics software performed computations at a velocity of over 19 hours, with data analyzed at 60-minute intervals. The Transition turbulent model was employed to simulate the airflow …

Evaluating Energy Efficiency And Thermal Performance In Egypt’S Social Housing: Climate-Responsive Design And Material Impact In Hot Desert Environments, Ahmed M. Hanafi, Mohamed A. Moawed, Osama E. Abdullatif

Journal of Engineering Research

As Egypt's urban areas expand rapidly, the demand for energy-efficient, affordable housing in extreme hot desert climates has become increasingly urgent. This study investigates the energy efficiency and thermal performance of Egypt’s Social Housing Project, with a focus on residential building in New Aswan City, where summer temperatures frequently exceed 45°C. Employing a validated energy model, this research simulates annual energy consumption for the building, which comprises 24 residential units, each approximately 86 m². The model integrates realistic occupancy schedules, region-specific weather data, and common household behavior patterns to closely reflect actual energy usage. Findings indicate a high alignment between …

Experimental Study On A Hybrid Solar Distillation System Integrated With A Photovoltaic Thermal Collector For The Co-Production Of Electricity And Freshwater, S. A. El Agouz, Mohamed Samy Abo Shala, Ayman Refat Abd Elbar

Journal of Engineering Research

This experimental study investigates the performance of a hybrid solar still system integrated with a photovoltaic (PV) panel and a cooling system, with the goal of enhancing both the freshwater productivity and the performance of the photovoltaic panel. Over a span of four consecutive days, four distinct experimental cases were tested in Tanta (Longitude/Latitude: E 31° 0′/ N 30° 47′), each with different cooling water flow rates of (3 L/min, 6 L/min, and 9 L/min) for cooling the lower surface of photovoltaic panel, and different hot water flow rates of (0.6 L/hr, 0.9 L/hr, and 1.2 L/hr) input to …

Effect Of Build Orientation On Tensile Properties And Fractography Of Additive Manufactured Inconel 718 Alloy, Ajay Kumar Maurya, Amit Kumar, Swarnambuj Suman

ASEAN Journal on Science and Technology for Development

The additive manufacturing (AM) technique “Direct Metal Laser Sintering (DMLS)” is used to create 3D objects directly from 3D design data. A lightweight and complexity-free part without any expensive tooling can be fabricated easily using this method, but it is still challenging to achieve the desired mechanical strength from AM parts, as the mechanical properties of AM-produced parts vary with orientation, scan strategy, and process parameters. Inconel 718 alloy is most commonly utilized in the aerospace and automotive industries, because of its high resistance to corrosion and excellent mechanical qualities. This work presents a study to investigate the orientation-based mechanical …

Numerical Study Of Flow Control On An Asymmetric Beveled Trailing Edge, M. M. Mosallem, Zienab A. Ahmed

Journal of Engineering Research

The current research aims to numerically study the effect of inserting a small rod into the wake of an asymmetric beveled trailing edge on the hydrodynamic forces and wake structure. The test model used in this study is a blunt-faced flat plate of thickness H and having an asymmetrical 60° beveled trailing edge. A control rod with diameter d = 0.2 H was inserted into two different locations (Location (1); x/H = 0.18, y/H = 1.0) and (Location (2); x/H = 0.28, y/H = 0.9) behind the trailing edge. Unsteady 2D numerical simulation was performed at Reynolds number, …

Maintenance Notes To Improve The Reliability Of Wheel Flange Failure For Overhead Crane, Fakhri Burhanuddin, Akhmad Herman Yuwono

Journal of Materials Exploration and Findings

Overhead traveling cranes in the industry have utility workload classifications and require high standards of safety and reliability by mobilizing lifting and transporting capacity variants of steel products, equipment, and other supports. The crane wheels are the main support in moving the end carriage so that the crane can work according to its function. Failures in the operation and maintenance cycle have occurred. Therefore, proper repair and maintenance methods are highly needed to restore the original design function to its working integrity. Logic tree analysis was used to breakdown all causes of failure; thus, mitigation was performed by carrying out …

Analysing The Results Of Solving The Problem Of A Machine Unit With Accelerator Mechanism, Yusuf Akhmedjanov

Technical science and innovation

Solutions of the obtained nonlinear differential equations of the machine unit are presented using the Maple mathematical program, determining the dependencies of changes in the parameters of the working body in the steady state as a function of the technological load on cotton for different values of the eccentricity of the tension roller of the belt drive. The article presents the changes in the angular velocities of the masses and torque on the engine shaft of the system as a function of time, the dependence of the change in the amplitude of oscillations of the accelerator shaft of the raw …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

Smartphone Color Error Analysis, Mackenna Hawes

The Journal of Purdue Undergraduate Research

No abstract provided.

Optimum Design Of Metallic And Plastic Cylindrical Gears Using Naturally-Inspired Algorithms: A Review, Marah Elsiedy, Hesham Hegazi, Ahmed Elkassas, Abdelhameed Zayed

Journal of Engineering Research

Abstract- Nowadays, several machinery and vehicles utilize mechanical elements which transmit power ranges from low, middle, and high levels depending on the type of equipment needed. Gears are the most influential design elements on any process during the running of a specific application, moreover engineers tried to obtain the optimality of a gear design which is a more compact, reliable- long service with simply operating features by following a systematic calculation of the mathematical model from standards and handbooks, however this process doesn't give the optimal design of the gears. Optimization techniques have been added to the design process for …

An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov

Technical science and innovation

The characteristics of the new oscillating-plate viscometer have been investigated experimentally. The results obtained are as follows: the resonant frequency of plate oscillation decreases with increasing viscosity; the apparatus constant 𝐾 determined experimentally includes the end and slip effects; the dimensions of the plate should be determined by referring to empirical relations between 𝜌𝜇 and Λ(≡{(𝐸𝑎𝐸)−1}𝑛) for various dimensions of the plate; where 𝜌 is the density, 𝜇 is the viscosity; 𝐸𝑎 the resonant amplitude of plate in the air; E the amplitude of plate in a liquid, and 𝑛 a constant. If the distance between the plate and the …

Biowall Development For The West Lafayette Public Library, Dhanurja De Silva, Yalin Lu, Siqi He, Ajay Dalal, Bill Hutzel

Purdue Journal of Service-Learning and International Engagement

A group of multidisciplinary Purdue students are working together to design, assemble, and install a Biowall in the Children’s section of the West Lafayette Public Library. A Biowall is a plant-based filter that improves Indoor Environmental Quality by cleaning indoor air and adding a natural aesthetic to the building space. Purdue has been developing Biowall technology since 2012, and this project involves redesigning it to fit into the available space at the library. The new Biowall design incorporates a watering mechanism that allows for children to get actively involved in maintaining the Biowall and learning about sustainability. This project also …

Dependence Of The Granulometric Composition Of Chalk During Granulation In A Turbulized Layer, N.A. Annaev, S.Kh. Nurmukhamedov, Zh.V. Sultonov, N.Sh. Khudoiberdieva

Chemical Technology, Control and Management

The article presents the results of an experimental study on chalk granulation in the turbulized layer of a turboblade granulator. The design of the apparatus combines the following sequential processes: grinding, granulating and compacting newly formed granules. In addition, this device has the ability to carry out both rotational and reciprocating motion. It has been established that preliminary grinding of the feedstock increases the efficiency of the granulation process and improves the quality of the finished product. In the experiments, four substances were used to create 2 astringent suspensions and the optimal combination and their ratios were determined. The experiments …

Analysis Of Thin Plates In Bending By New Rectangular Strain Based Element., Samira Chichoune, Cherif Rebiai

Emirates Journal for Engineering Research

Abstract

This paper deals with the development of a new simple four node rectangular finite element for bending analysis of thin plates. The displacement s field of this element is based on the assumed functions for the various strains satisfying the compatibility equations. This developed element has three degrees of freedom at each node (two rotations and one translation), and it passed successfully benchmark tests in the case of thin plates without shear locking phenomena. The obtained numerical results using the developed element converge toward both analytical and reference solutions.

Water Hammer Analysis For Ash Slurry Disposal Pipelines Of A Thermal Power System, Biprodip Mukherjee, Subhasish Das, Satyapriya Mandal

Journal of Environmental Science and Sustainable Development

Coal-ash slurry transportation via pipelines has been accepted as a potential, economical, and dependable mode of two-phase flow of solid-liquid transportation. It is solid-liquid transportation where the ash slurry generally flows through mild steel, and a good amount of pump energy and pressure is required to convey the slurry with a density above 1220 kg/m3. The study is basically on the water hammer analysis of ash slurry conveying pipes. Nevertheless, since the hammer analysis is typically carried out in normal water, the study of ash slurry is compared to the know criteria of potable water. The study aims to understand …

Estimating Remaining Life And Fitness-For-Services Evaluation Of Fuel Piping Systems, Sekar Putri Purwidyasari, Ahmad Isni Kurniawan, Deni Ferdian

Journal of Materials Exploration and Findings

Assets life extension are required to predict the design life expiry based on condition and effects of deterioration. The remaining life assessment will answer the questions about timing of the component or equipment will lead to failure and shall be evaluated by inspection and maintenance monitoring. This study elaborates process calculation and analysis by using remaining life assessment and fitness for services method according to API 579-1/ASME FFS-1 for process piping area. The result of remaining useful life estimation and estimated life has been proposed. There are 11 piping systems based on the condition monitoring with thickness measurements. The result …

Sculpting Charge In Graphene Through Patterned Strain, Dylan J. Balter, Jenna Smith

The Journal of Purdue Undergraduate Research

No abstract provided.

Mathematical Model Of The Efficiency Of Investments Aimed In The Implementation Of Water-Saving Technologies

Irrigation and Melioration

In Uzbekistan, research work is being carried out aimed at improving the economic mechanisms for the introduction of water-saving technologies for irrigating agricultural crops. At the same time, the issues related to the analysis of the effectiveness of the use of water-saving technologies when irrigating cotton, the development of mathematical methods for assessing the effectiveness of investments, as well as their introduction into practice have not been sufficiently studied. This article provides a mathematical model of the efficiency of investments aimed at introducing water-saving technologies. The results of a numerical experiment of a mathematical model show that the introduction of …

Efficient Use Of Water Resources In The Basins Of Small Rivers, F. Gapparov, M.F. Gafforova

Irrigation and Melioration

The article provides a recommendation for the efficient use of water resources in the basins of small foothill rivers. The research was carried out on the example of the Govasay river basin located in the northern part of the Fergana Valley. The efficiency factor of the canal has been determined and a technical assessment has been given for the management of water resources in the river basin; the efficiency of the canal is 65-75%. A program for the operational management of water resources in The Govasay river basin and a GIS map of water consumers in the Govasay river basin …

Model Of Groundwater Level Control Using Horizontal Drainage, A. Arifjanov, M. Otaxonov, Z. Abdulkhaev

Irrigation and Melioration

The article describes the main factors affecting the rise in the level of groundwater in the city of Fergana and ways to eliminate them. Currently, in order to reduce the negative impact of rising groundwater levels on the environment, crops, buildings and structures, as well as underground utilities, it is proposed to design horizontal drainage in urban areas and a mathematical model has been developed for changing the groundwater level. For this, long-term data from observation wells were analyzed and the hydraulic parameters of horizontal drainage were selected taking into account the hydrogeology of the area. Taking into account the …