Other Mechanical Engineering Commons^™

Design And Fabrication Of 3d Bioprinted Scaffold: Experimental And Machine Learning Methods, Mohan K. Dey

LSU Doctoral Dissertations

The development of reliable hydrogel-based scaffolds for extrusion bioprinting remains limited by the poor structural fidelity of low-viscosity bioinks and the lack of robust, high-throughput quality evaluation methods. This dissertation can resolve such challenges by developing the combination of optimized hydrogel formulations, cryogenic-assisted bioprinting, and artificial intelligence (AI)-based scaffold evaluation to the use of tissue engineering and preclinical cancer modelling applications. To assess the rheological behavior, printability, mechanical properties, and biocompatibility of the alginate – gelatin (Alg–Gel) system, a novel system of hydrogel was developed and characterized using Alg–Gel hydrogel system. The 7% alginate, 8% gelatin mixture was found to …

Me Department Bespoke Coffee Cabinet, Mickie Clyne, Stephen Tamacheepjaroen, Samuel Johnson, Willem Gray

Mechanical Engineering

This senior project involved the design, fabrication, and testing of a custom coffee cabinet for the California Polytechnic State University Mechanical Engineering Department. The project addressed challenges associated with appliance organization, storage efficiency, accessibility, and maintenance within the department’s shared breakroom space. A human-centered design process was used to identify stakeholder needs and develop engineering specifications for the final product.

The completed cabinet integrates custom woodworking, steel pipe frame construction, dedicated K-Cup storage, organized appliance placement, and a rack-and-pinion sliding platform that improves access to the Keurig coffee maker for refilling and maintenance. Design decisions were informed through stakeholder feedback, …

Multi-Objective Optimization Strategy For Component Sizing In Solar-Hydrogen Microgrids Using An Advanced Hybrid Genetic Algorithm, Dylan Jones

UNF Graduate Theses and Dissertations

This thesis presents the development of a genetic algorithm (GA) optimization framework for the design and component sizing of hybrid solar-hydrogen microgrids. The framework addresses a critical gap in research and existing commercial tools by unifying performance maximization and cost minimization objectives across both grid-tied and islanded configurations. Integrating solar photovoltaics, electrolyzers, hydrogen storage, fuel cells, and batteries, the GA employs adaptive weighting and dynamic boundary constraints to balance technical feasibility with economic efficiency. To ensure real-world viability, the algorithm relies on a novel Daylight Sun Factor (DSF) for localized solar assessment and was rigorously validated against multi-year, high-fidelity irradiance …

A Multiobjective Framework For Joint Coverage And Motion Planning In Uav Inspection Tasks, Luis Fernando Escobar Carvajal

Graduate Theses, Dissertations, and Problem Reports (ETD)

Unmanned Aerial Vehicles (UAVs) have become essential for data acquisition in complex 3D environments. However, traditional Coverage Path Planning (CPP) methodologies often rely on a sequential pipeline that isolates viewpoint generation from flight path routing. This decoupling fails to account for the interdependence between viewpoint distribution and minimum flight paths, effectively restricting the search space and preventing the identification of a global optimum. This dissertation proposes a unified multi-objective framework for joint coverage and motion planning. The primary contribution of this work is the transition from isolated, sequential steps to a simultaneous optimization of the number and position of viewpoints …

Design And Development Of Ultrabroadband, High-Gain, And High-Isolation Thz Mimo Antenna With A Complementary Split-Ring Resonator Metamaterial, Ammar Armghan, Khaled Aliqab, Meshari Alsharari, Osamah Alsalman, Juveriya Parmar, Shobhit K. Patel

Department of Mechanical and Materials Engineering: Faculty Publications

The need for high-speed communication has created a way to design THz antennas that operate at high frequencies, speeds, and data rates. In this manuscript, a THz MIMO antenna is designed using a metamaterial. The two-port antenna design proposed uses a complementary splitring resonator patch. The design results are also compared with a simple patch antenna to show the improvement. The design shows a better isolation of 50 dB. A broadband width of 8.3 THz is achieved using this complementary split-ring resonator design. The percentage bandwidth is 90%, showing an ultrabroadband response. The highest gain of 10.34 dB is achieved …

Comparative Design Space For Bistable Composites: An Integrated Framework Of Optimization, Finite Element Analysis, And Experimental Testing, Jonathan Bolanos

All Theses

Bistable composites are a class of advanced materials that can actuate between two stable shapes, making them attractive for a wide range of engineering applications. However, designing these composites to achieve optimal performance remains a challenging task. To address the challenge, this research develops an integrated framework that combines a genetic algorithm optimization technique, finite element analysis in Abaqus, and experimental testing to explore the design comparative space for square bistable composites composed of DA 409 carbon fibers. This leads to the study of generating an optimization algorithm to account for the relationship between the chances of a successful maximum …

An Application Of Optimized Bistable Laminates As A Low Velocity, Low Impact Mechanical Deterrent, Graham Lancaster

All Theses

This research considers the problem of using bistable laminates as a mechanical deterrent to the impending impact of a particle. The structure will be controlled through an algorithm that will utilize piezoelectric devices to activate them in unison with the bistable laminate to successfully deter. A novel experimental setup will be constructed to ensure that the bistable laminate stays fixed when acting as a mechanical deterrent. Piezoelectricity is the main driving force of the bistable laminate to morph and this study will use a Macro Fiber Composite (MFC) actuator that contains piezoelectric ceramic rods in a patch to transfer electrical …

Development Of An Eco Approach And Departure Application To Improve Energy Consumption Of A Plug-In Hybrid Vehicle In Charge Depleting Mode, Brandon Narodzonek

Dissertations, Master's Theses and Master's Reports

A recent study at Michigan Technological University as part of the NEXTCAR DOE APRA-E Project was conducted to determine the potential energy savings of a plug-in hybrid electric vehicle (PHEV) equipped with various Connected and Automated Vehicle (CAV) Technologies. One aspect of this study focused on the development of an Eco Approach and Departure (Eco AnD) Application that would further reduce the energy consumed around a signalized intersection.

Many modern intersections are equipped with traffic signals that can broadcast Basic Safety (BSM), MAP, and Signal Phase and Timing (SPaT) message sets that contain intersection ID, location, current phase, and cyclic …

Corgi: Compute Oriented Recumbent Generation Infrastructure, Christopher Allen Hunt

Master's Theses

Creating a bicycle with a rideable geometry is more complicated than it may appear, with today’s mainstay designs having evolved through years of iteration. This slow evolution coupled with the bicycle’s intricate mechanical system has lead most builders to base their new geometries off of previous work rather than expand into new design spaces. This crutch can lead to slow bicycle iteration rates, often causing bicycles to all look about the same. To combat this, several bicycle design models have been created over the years, with each attempting to define a bicycle’s handling characteristics given its physical geometry. However, these …

Optimization In The Simulation Of Jammed Polyhedral Particles, Joseph W. Mynhier, Ishan Srivastava, Timothy S. Fisher

The Summer Undergraduate Research Fellowship (SURF) Symposium

Energy loss due to poor transport properties in electrically and thermally conducting materials, such as battery electrodes and thermoelectric composites, contributes to the energy inefficiency of electronic devices. For conductive materials composed of granular materials, particle-particle contact topology strongly governs the efficiency of energy transfer. Although there is a large body of existing work on the arrangements made by granular materials comprised of spherical particles, less is known about the mechanically stable arrangements of granular materials made of convex polyhedra. This project seeks to create a computer simulation of the solidification of convex polyhedra from a diffuse state into a …

A Metrics-Based Sustainability Assessment Of Cryogenic Machining Using Modeling And Optimization Of Process Performance, Tao Lu

Theses and Dissertations--Mechanical and Aerospace Engineering

The development of a sustainable manufacturing process requires a comprehensive evaluation method and fundamental understanding of the processes. Coolant application is a critical sustainability concern in the widely used machining process. Cryogenic machining is considered a candidate for sustainable coolant application. However, the lack of comprehensive evaluation methods leaves significant uncertainties about the overall sustainability performance of cryogenic machining. Also, the lack of practical application guidelines based on scientific understanding of the heat transfer mechanism in cryogenic machining limits the process optimization from achieving the most sustainable performance.

In this dissertation, based on a proposed Process Sustainability Index (ProcSI …