Other Mechanical Engineering Commons^™

A Framework For Studying Meshfree Geometry And A Method For Explicit Boundary Determination, Joseph Bradley Alford

USF Tampa Graduate Theses and Dissertations

Patient-specific biomechanical analysis is an important tool used to understand the complex processes that occur in the body due to physical stimulation. Patient-specific models are generated by processing medical images; once an object from the image is identified via segmentation, a point cloud representation of the object is extracted. Generating an analysis suitable representation from the point cloud has traditionally required generating a finite element mesh, which often requires a well defined surface to accomplish. Point clouds lack a well defined geometry, meaning that the surface definition is incomplete at best. Point clouds that have been generated from images have …

Experimental And Computational Study On Fracture Mechanics Of Multilayered Structures, Hai Thanh Tran

USF Tampa Graduate Theses and Dissertations

Many devices in electronics are in the form of multilayered structures. These structures can fail catastrophically if they contain defects or cracks. Enhancing their fracture properties is therefore critical to improve the reliability of the systems. The interface-dominated fracture mechanics of multilayered structure was studied using experiments and finite element (FE) modeling by considering two examples: thin films on polymer substrates in flexible electronics and Cu leadframe/epoxy molding compound (EMC) in micro-electronics packaging.

In the first example, aluminum-manganese (Al-Mn) thin films with Mn concentration up to 20.5 at.% were deposited on polyimide (PI) substrates. A variety of phases, including supersaturated …

Video Capture And Post-Processing Technique For Approximating 3d Projectile Trajectory, Chase M. Pfeifer, Judith M. Burnfield, Guilherme M. Cesar, Max H. Twedt, Jeff A. Hawks

Department of Mechanical and Materials Engineering: Faculty Publications

In this paper we introduce a low-cost procedure and methodology for markerless projectile tracking in three-dimensional (3D) space. Understanding the 3D trajectory of an object in flight can often be essential in examining variables relating to launch and landing conditions. Many systems exist to track the 3D motion of projectiles but are often constrained by space or the type of object the system can recognize (Qualisys, Göteborg, Sweden; Vicon, Oxford, United Kingdom; Opti-Track, Corvallis, Oregon USA; Motion Analysis, Santa Rosa, California USA; Flight Scope, Orlando, Florida USA). These technologies can also be quite expensive, often costing hundreds of thousand dollars. …

Flex-Ro: Design, Implementation, And Control Of Subassemblies For An Agricultural Robotic Platform, Jared Patrick Werner

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Automation technology in agriculture is growing, making agricultural robotics viable. Innovative field usable multi-purpose robotic platforms are needed for the successful progression of agricultural robotics. Furthermore, the field of agricultural robotics would benefit from a robotic platform design allowing for variable height, thus accommodating navigation throughout various crop growth stages. A variable height machine, Flex-Ro was developed to accommodate this feature. Multiple sub-assemblies were designed and implemented for Flex-Ro. An electronic control unit (ECU) enabled engine was used to power Flex-Ro. An embedded application program was developed to control engine speed using proprietary Controller Area Network (CAN) messages in conjunction …

Study On Mechanical Properties Of Silicone Rubber Materials Used As Gaskets In Pem Fuel Cell Environment, Guo Li

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Mhd Modeling Of A Copper Slag Cleaning Process, Hongkun Yang, Jörg Wolters, Helmut Soltner, Phillip Pischke, Sven Eckert, Jochen Fröhlich

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Fluid Dynamic Factors As A Cause And Effect Of Biofilm Formation Of Staphylococcus Aureus Biofilms, Erica Sherman

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Staphylococcus aureus bacteria are able to form biofilms and distinctive tower structures that facilitate their ability to tolerate treatment and to spread within the human body. The formation of towers, which break off, get carried downstream and serve to initiate biofilms in other parts of the body are of particular interest here. It is known that flow conditions play a role in the development, dispersion and propagation of biofilms. The influence of flow on tower formation and what factors lead to tower formation is not at all understood The hypothesis being examined is that tower structures form within a specific …

Thermal Analysis Of Continuous And Patterned Multilayer Films In The Presence Of A Nanoscale Hot Spot, Jia-Yang Juang, Jinglin Zheng

Department of Mechanical and Materials Engineering: Faculty Publications

Thermal responses of multilayer films play essential roles in state-of-the-art electronic systems, such as photo/micro-electronic devices, data storage systems, and silicon-on-insulator transistors. In this paper, we focus on the thermal aspects of multilayer films in the presence of a nanoscale hot spot induced by near field laser heating. The problem is set up in the scenario of heat assisted magnetic recording (HAMR), the next-generation technology to overcome the data storage density limit imposed by superparamagnetism. We characterized thermal responses of both continuous and patterned multilayer media films using transient thermal modeling. We observed that material configurations, in particular, the thermal …

Case Study Of Quantifying Energy Loss Through Ceiling-Attic Recessed Lighting Fixtures Through 3d Numerical Simulation, Ri Na, Shengmao Lin, Zhigang Shen, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Abstract Air leakage through recessed lighting fixtures has been identified as a common issue that causes extra energy consumption in residential buildings. However, few quantitative studies in this area were found. As such, a preliminary assessment of the magnitude of this type of energy loss was conducted by using three-dimensional (3D) transient computational fluid dynamics (CFD) models. A hypothetical layout of recessed lighting fixtures was designed with boundary conditions of four different seasons, which were obtained from recorded roof/attic temperature data sets. The results of the study indicate that leakage of recessed lighting fixtures could be a significant channel of …

Compositionally Graded Bulk Heterojunction Devices And Methods Of Manufacturing The Same, Jinsong Huang, Zhengguo Xiao

Department of Mechanical and Materials Engineering: Faculty Publications

Systems and methods are described to form compositionally graded BHJ structures utilizing solvent-fluxing techniques. In implementations, the systems and methods described herein involve a high boiling point additive, a solution of a polymer donor and an acceptor, a substrate material, a working solvent, and a flux solvent for formation of compositionally graded BHJ structures.

Bioink Properties Before, During And After 3d Bioprinting, Katja Hölzl, Shengmao Lin, Liesbeth Tytgat, Sandra Van Vlierberghe, Linxia Gu, Aleksandr Ovsianikov

Department of Mechanical and Materials Engineering: Faculty Publications

Bioprinting is a process based on additive manufacturing from materials containing living cells. These materials, often referred to as bioink, are based on cytocompatible hydrogel precursor formulations, which gel in a manner compatible with different bioprinting approaches. The bioink properties before, during and after gelation are essential for its printability, comprising such features as achievable structural resolution, shape fidelity and cell survival. However, it is the final properties of the matured bioprinted tissue construct that are crucial for the end application. During tissue formation these properties are influenced by the amount of cells present in the construct, their proliferation, migration …

Optical Patterning Of Trapped Charge In Nitrogen-Doped Diamond, Harishankar Jayakumar, Jacob Henshaw, Siddharth Dhomkar, Daniela Pagliero, Abdelghani Laraoui, Neil B. Manson, Remus Albu, Marcus W. Doherty, Carlos A. Meriles

Department of Mechanical and Materials Engineering: Faculty Publications

The nitrogen-vacancy (NV) centre in diamond is emerging as a promising platform for solid-state quantum information processing and nanoscale metrology. Of interest in these applications is the manipulation of the NV charge, which can be attained by optical excitation. Here, we use two-colour optical microscopy to investigate the dynamics of NV photo-ionization, charge diffusion and trapping in type-1b diamond. We combine fixed-point laser excitation and scanning fluorescence imaging to locally alter the concentration of negatively charged NVs, and to subsequently probe the corresponding redistribution of charge. We uncover the formation of spatial patterns of trapped charge, which we qualitatively reproduce …

Designing And Building An Automatic Chamfer Grinder, William Johnson

Mahurin Honors College Capstone Experience/Thesis Projects

Modern day manufacturing is a demanding environment with a constant need for process improvement. As automation becomes more advanced, there are fewer jobs that must be completed by a human. In the case of Stupp Bridge Company, a local manufacturer of steel bridge girders, their workforce is highly skilled, so replacing mundane tasks with automation allow the skilled workers to focus on the difficult jobs. One such task is grinding a chamfer onto every leading edge of each girder flange, eight edges in total, ranging from 20 to 200 feet long. The purpose of this project was to design an …

Open-Loop Electrowetting Actuation With Micro-Stepping, Qi Ni, Daniel E. Capecci, Nathan B. Crane

Faculty Publications

Microfluidic-driven mechanical actuation opens new possibilities for positioning and manipulating delicate small components. However, existing microfluidic actuation methods are not well-suited to positioning with high resolution. This paper reports a method for precise, open-loop control of droplet position in finite steps by varying the duty cycle of the input signal in electrowetting actuation. When wetted to a solid object, both the droplet and the solid can be actuated. Unlike conventional electrowetting actuation methods, positioning resolution in our proposed method can be much smaller than the size of the underlying electrodes without requiring closed loop feedback control system. Using a leaky …

Development Of A Diode-Laser Absorption-Spectroscopy Sensor For Real-Time Control Of Combustion Systems, Rahul P. Balla, Christopher S. Goldenstein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Tunable diode-laser absorption spectroscopy (TDLAS) sensors are widely used for measuring gas properties. These sensors offer several advantages including: small footprint, affordability, applicability to harsh environments, rapid time response, and calibration-free operation. As a result, diode-laser sensors can be integrated into control-systems and have previously been used to control gas-turbine combustors. In this study, high-frequency sine waves were generated continuously by a LabVIEW program to simultaneously scan and modulate the wavelength and intensity of a diode laser. The modulated laser light was transmitted 20 cm through the air and measured on a photodetector. Custom-built lock-in software was used to acquire …

High Strain Rate Experiments Of Energetic Material Binder, Roberto Rangel Mendoza, Michael Harr, Weinong Chen

The Summer Undergraduate Research Fellowship (SURF) Symposium

Energetic materials, in particular HMX, is widely used in many applications as polymer bonded explosives (PBX) and rocket propellant. However, when damaged, HMX is known to be an unstable substance which renders it a hazardous material and in some cases unreliable. Finding critical mechanical conditions at high rates that render various forms of energetic materials as unreliable would be vital to understand the effects that vibrations and compression forces have on energetic materials. A better understanding would enable the ability to develop improvements in the manufacturing of PBX and rocker propellant. The method utilized to evaluate the mechanical properties of …

Fiber-Optic Imaging In An Internal Combustion Engine Test Rig, Conor Martin, Michael Smyser, Aswin Ramesh, Greg Shaver, Terrence Meyer

The Summer Undergraduate Research Fellowship (SURF) Symposium

The formation of particulate matter (PM/soot), nitrogen oxides (NOx), and other byproducts of the combustion process in diesel engines is controlled by spatiotemporally varying quantities within the engine cylinders which traditional sensors cannot resolve. This study explores the use of an advanced sensing technique using an optical probe which can be used to produce highly spatiotemporally resolved in cylinder images of the flame formation during the combustion stroke. Using a fiber optic cable and custom lensing system adapted to fit a pre-existing pressure transducer port, light from within the cylinder can be transmitted through the imaging probe to a high …

Robust Bi-Directional Continuous Electrowetting Based On Metal-Semiconductor (M-S) Diodes, Qi Ni, Daniel E. Capecci, Millicent Schlafly, Nathan B. Crane

Faculty Publications

We demonstrate bi-directional continuous electrowetting by embedding metal-semiconductor diodes in the electrowetting substrate. Unlike conventional electrowetting on dielectric (EWOD), bi-directional continuous electrowetting uses a single electrode pair to actuate a droplet through long distances. As long as the voltage potential is maintained between two end electrodes, the droplet moves toward the electrode with the higher potential. However, previously reported material systems had limited success in repeated actuation. In this work, diodes based on Schottky barriers were fabricated by forming metal-semiconductor junctions between titanium and high resistivity n-type silicon. The performance enhancements were evaluated using current-voltage measurements of interface pairs. When …

Contribution Of Fiber Undulation To Mechanics Of Three-Dimensional Collagen-I Gel, Shengmao Lin, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The collagen-I gel is extensively used as a scaffold material in tissue engineering due to its ability to mimic the extracellular matrix (ECM). In this study, the mechanics of collagen-I gel is investigated using a numerical model of three-dimensional collagen network. The resulted mechanical behavior was validated against the published experimental data. Results illustrated that fiber alignment was dominated in the low strain region, and its transition to stretching dominated phenomena at higher strain led to the strain stiffening of collagen gel. The collagen undulation at the microscopic level was found to delay the initiation of strain stiffening

Effects Of Electrode Off Centre On Trapped Thickness-Shear Modes In Contoured At-Cut Quartz Resonators, Junjie Shi, Cuiying Fan, Minghao Zhao, Jiashi S. Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We investigated thickness-shear vibrations of a contoured, AT-cut quartz resonator with a pair of electrodes displaced from the resonator centre. The scalar differential equations by Stevens and Tiersten for thickness-shear vibrations of electroded and unelectroded quartz plates were employed. Based on the variational formulation of the scalar differential equations established in a previous paper and the variation-based Ritz method with trigonometric functions as basis functions, free vibration resonance frequencies and trapped thickness-shear modes were obtained. The effects of the electrode off centre on resonance frequencies and mode shapes were examined. When the electrode off centre is about one hundredth of …

Inclusive Lectern, Trent Canales, Sean Day, Dylan Sigley, Stephen Sippel

Mechanical Engineering

A lectern is an essential piece of equipment for almost all speeches and presentations. They come in many forms and range in degree of professionalism depending on the occasion. Lecterns not only hold a presenter’s notes, a microphone, or other presentation aids, they provide a structure for a presenter that can bolster their confidence during a presentation. As such, it is important that all presenters have a lectern available to them. Unfortunately this is not always the case due to lectern accessibility limitations. This problem inspired the Cal Poly Disability Resource Center to request a lectern that satisfies the Least …

Magnetic Bearing For Bently Nevada Rk4 Rotor Kits, Sean Fowler, Garrett Olson

Mechanical Engineering

Active Magnetic Bearings (AMB) are contact free bearings that support loads by magnetic levitation. This is accomplished by generating magnetic forces with electric current through a series of electromagnets surrounding a suspended rotor mass. Along with a set of electromagnets, an AMB assembly also consists of power amplifiers for each electromagnet, a controller, and proximity sensors. The proximity sensors provide rotor position feedback to the control system, which modulates power to the amplifiers [4]. Magnetic bearings are used in several industrial applications today, including but not limited to compressors, turbines, pumps, motors, and generators. Advantages of their utility include very …

Transit Seating, Luke Mielke, Chris San Nicolas, Jon Rich, Sam Thompson

Mechanical Engineering

No abstract provided.

Walker Tray, Marlene Troncoso, Judy Lantaca, Miriam Krage, Claire Francis

Mechanical Engineering

Sean is an individual with Cerebral Palsy, a disability that affects one's balance, muscle tone, muscular coordination, posture and control. Sean utilizes a walker to aid in maintaining his balance and muscular coordination when ambulating. This enables him to walk independently and leads to improved muscle strength and coordination. When walking, Sean places both hands on the walker to maintain balance and thus the ability to walk and carry items at the same time is compromised. Sean would like to be able to transport items while in use of his walker. The goals of this senior project design are to …

Micro Debris Generator, Gordan Bradaric, Ross Byers, Stephen Quanci

Mechanical Engineering

This senior project team at Cal Poly consisting of Stephen Quanci, Gordan Bradaric, and Ross Byers has been commissioned by Erik Brown of Lawrence Livermore National Labs to create a way to reliably and consistently entrain microscopic particles into the hot HTTU flow. These particles will be used to compare the loading rates of new HEPA filters by measuring the pressure drop across the filter. The generated particles would simulate typical conditions in which these HEPA filters are expected to operate, namely fine ash. The particles used for loading the filter are intended to simulate the particulate reaching the LLNL …

Putter Measurement System, Bryan A.L. Hofferd, Yuzo Makitani, Jacob Phillips, Eric Stubben

Mechanical Engineering

This project is provided and funded by Callaway Golf Company for the Mechanical Engineering Department as a capstone project, also known as the Senior Project series: ME 428, 429, and 430. The title of the project proposal is "Putter Measurement System" in which our team must design, build, and test a system that meets the proposed objectives as stated by Callaway Golf. The need arises from the current systems’ inability to provide detailed and consistent measurements without tedious setup and calibration.

Compliant Air Skates, An Experiment, Samuel Feldtkeller, Cody Anderson, Kevin Daily, Eliana Stefani

Mechanical Engineering

There is currently a gap in the market of train levitation systems: wheeled trains and MagLev trains exist, but none utilize the low friction and high efficiency aspect of trains levitated by air skates. An air skate, is an air bearing that uses a pressure difference along its annular body to create a thin flow of air which is strong enough to "levitate" the weight of the skate. We have designed a compliant air skate that can glide over 0.04[in] defects in surfaces without touching down. After having made compliant skirts out of fiberglass and silicone, our setup of three …

Experimental Building Demonstration Model With Viscous Fluid Dampers, Blake Thomas Reeve, Brianna Jean Kufa, Aden Malek Stepanians, Sophie Carmion Ratkovich

Architectural Engineering

The Architectural Engineering major places a heavy emphasis on structural dynamics and the role of wind and seismic loading in building analysis and design. Buildings of high importance that are critical to community function, such as hospitals, often utilize supplemental damping devices like supplemental viscous fluid dampers or base isolators to reduce the overall demands on the structural system. The design and analysis of these dampers are typically not taught at the undergraduate level, and is frequently performed by mechanical engineers, in lieu of structural engineers.

To better understand and research building behavior with supplemental damping devices, our multi-disciplinary team …

Portable Sensory Room For The West Orange County Consortium For Special Education, Lindsey Chase, Emma Eskildsen, Alex Fox, Claire Francis, Nate Hoffman, Kaylee Keck, Sarah Sullivan

Biomedical Engineering

This report discusses the development of a Portable Sensory Room to be used at Newland Elementary School in Huntington Beach. Newland Elementary has an exceptional Special Needs program that teaches the children with the most severe cases of autism in its school district. People with autism typically also have sensory processing disorders, which can be extremely disruptive for a child’s development and can make it difficult for a child to be able to concentrate long enough to gain necessary life skills. The idea behind a Sensory Rooms is to create a place to calm the students and to expose them …

Efficiency Testing Of An Electronic Speed Controller, Grace Cowell, Matthew Hudson, Marcus Pereira

Mechanical Engineering

This project required the development of a rig that could experimentally determine the efficiency of an Electronic Speed Controller (ESC). The selected design focuses on measuring the losses due to heat from the device and comparing this to its input power. The selected design is a flow rig that utilizes the heat equation q=ṁcpΔT. The rig provides a steady state measurement of the ESC heat output by passing a known mass flow rate of air across the ESC and measuring the temperature difference. It uses a flowmeter to determine ṁ, thermocouples to determine ΔT, and a table lookup to determine …