Mechanical Engineering Commons^™

Safety Concepts For Every Ride: A Statistical Ensemble Simulation To Mitigate Rotational Falls In Eventing Cross Country, Shannon Wood

Theses and Dissertations--Mechanical and Aerospace Engineering

Rotational falls are the leading cause of death and serious injury in the equestrian sport of eventing. Previous studies to develop safety devices used physical models representing one or at most several physical situations leading to different designs and no common understanding. In this thesis, a statistical ensemble model is developed and applied to generate and evaluate 10,000 different situations that might potentially lead to rotational falls. For accurate statistical representation of the horse and rider inertia distributions, measurements of over 400 training or competing horses and riders were recorded and incorporated. Video was recorded of 218 total competitors approaching …

Capillary Flow Of Liquid Aluminum Alloy In Wetting And Wetting/Non-Wetting Systems, Yangyang Wu

Theses and Dissertations--Mechanical and Aerospace Engineering

In this dissertation, the capillary flow of liquid aluminum alloy in both wetting and wetting/non-wetting systems is investigated.

The impact of gravity and surface topography on the capillary flow has been studied in a wetting/non-wetting assembly (an AA3003/Al₂O₃ wedge-tee configuration). The research includes (i) kinetics of liquid Al-Si-K_xAl_yF_z alloy triple line movements and dynamic macro advancing and receding contact angles and (ii) free surface profiles of the molten alloy driven by surface tension and impacted by gravity. A trade-off between the surface tension and gravity force has been found by calculating the …

Development And Application Of Novel Sound Absorbers, Weiyun Liu

Theses and Dissertations--Mechanical and Aerospace Engineering

The sound absorbers in most common use today are porous materials like fibers and foams. This work examines three alternatives to porous absorbers: microperforated panels, acoustic fabrics, and additively manufactured absorbers. The research is a combination of design, measurement and characterization of their properties, and analysis.

Microperforated panels are thin metallic or plastic panels with sub-millimeter size holes or perforations. Sound absorption can be tuned by adjusting the spacing between the panel and a cavity behind the panel. Several different configurations were considered where the geometry behind the panel was divided up into channels of varying length and cross-sectional area. …

Development Of Micro-Scale High Aspect Ratio Patterned Features With Electroless Nickel Plating, Lorli Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis describes a novel method designed to pattern high aspect ratio metallic microscale features using a modified photolithography and electroless nickel plating process. This method utilizes modified photolithography techniques to create a polymer mold that is used to control the location of metal deposition on substrate during electroless nickel plating. In order to generate high aspect ratio mold features, a multiple spin-step process was developed to deposit thick layers of SU-8 photoresist, and inclined lithography was also used to generate tapered sidewalls that could help aid mold removal after plating. Results from electroplating experiments were evaluated using a Zygo …

Development Of Universal Solver For High Enthalpy Flows Through Ablative Materials, Umran Duzel

Theses and Dissertations--Mechanical and Aerospace Engineering

Atmospheric entry occurs at very high speeds which produces high temperature around the vehicle. Entry vehicles are thus equipped with Thermal Protection Systems which are usually made of ablative materials. This dissertation presents a new solver that models the atmospheric entry environment and the thermal protection systems. In this approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical problems, set of benchmarks and also a …

Bacterial Cell Wall Characterization Via Atomic Force And Confocal Microscopy, Joree Sandin

Theses and Dissertations--Mechanical and Aerospace Engineering

Poor oral hygiene is a severe global health issue, with about 44% of the Earth’s population suffering from untreated tooth decay, accounting for over $100 billion dollars spent on dental services per year in the United States, alone. Manual treatments, such as brushing, flossing, or swishing with antiseptic rinse are the main ways to alleviate harmful bacteria that cause these oral health problems. Streptococcus mutans (S. mutans) is a group of highly antibiotic, Gram-positive bacteria that heavily contribute to oral cavities, plaque build-up, and potential loosening or loss of dental implants if a biofilm develops. Currently, the mechanism …

Carbon Oxidation At The Atomic Level: A Computational Study On Oxidative Graphene Etching And Pitting Of Graphitic Carbon Surfaces, Simon Schmitt

Theses and Dissertations--Mechanical and Aerospace Engineering

In order to understand the oxidation of solid carbon materials by oxygen-containing gases, carbon oxidation has to be studied on the atomic level where the surface reactions occur. Graphene and graphite are etched by oxygen to form characteristic pits that are scattered across the material surface, and pitting in turn leads to microstructural changes that determine the macroscopic oxidation behavior. While this is a well-documented phenomenon, it is heretofore poorly understood due to the notorious difficulty of experiments and a lack of comprehensive computational studies. The main objective of the present work is the development of a computational framework from …

Fabrication And Characterization Of Nickel Plated Micro-Resonators For Noncommutative Orientation Control In Microrobots, Marc Manheim

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis describes a procedure for fabricating arrays of microstructures out of SU-8 photoresist and nickel, which was developed with the goal of yielding microrobots capable of 1D rotation byway of magnetically-induced beam vibration that could be used for non-commutative orientation control. Several multi-layer geometries were designed, fabricated, tested and refined. In this process, micro-adhesion of multiple SU-8 layers was also studied. A method for depositing nickel via electroless plating was also developed, tested and characterized. While no microrobots were shown to produce rotation, the final results included beams that were capable of magnetically-induced vibration when subjected to an AC …

The Optimum Design Of A Vacuum-Compatible Manipulator To Calibrate Space Based Ultraviolet Imagers, Jason L. Grillo

Master's Theses

Recent discoveries in geospace science have necessitated the design of compact UV imaging instruments to make space-based observations from multiple vantage points. The miniaturized ultraviolet imager (MUVI) instrument from the Space Sciences Laboratory (SSL) at UC Berkeley is under development to facilitate such discoveries on a wider scale. This thesis documents the design, integration, and characterization of a vacuum compatible manipulator to calibrate the MUVI instrument inside the UV thermal vacuum chamber at SSL. Precision linear and rotation stages were implemented with custom mounting plates to achieve four degrees of freedom. Optical components were installed to imitate the MUVI instrument …

Theoretical Investigation Of The Low Frequency Fundamental Mechanism Of The Objective Occlusion Effect Induced By Bone-Conducted Stimulation, Kevin Carillo, Olivier Doutres, Franck Sgard

Études primaires

The objective occlusion effect induced by bone-conducted stimulation refers to the low frequency acoustic pressure increase that results from occluding the ear canal opening. This phenomenon is commonly interpreted as follows: the bone-conducted sound “leaks” through the earcanal opening and is “trapped” by the occlusion device. This instinctive interpretation misrepresents the fundamental mechanism of the occlusion effect related to the earcanal impedance increase and already highlighted by existing electro-acoustic models. However, these models simplify the earcanal wall vibration (i.e., the origin of the phenomenon) to a volume velocity source which, in the authors' opinion, (i) hinders an exhaustive comprehension of …

Test 2220: John Deere 7r 310, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2221: John Deere 7r 330, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2222: John Deere 8r 340, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2223: John Deere 8r 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2224: John Deere 8r 410, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2228: John Deere 8rx 410, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1194: John Deere 6145m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

How Quality Management Has Been Impacted In The Face Of Covid-19, Eldina Siljkovic

Dissertations and Theses @ UNI

The Coronavirus pandemic has impacted many facets of the United States. This study focuses on its magnitude in comparison to prior pandemics such as Anthrax, SARS, and Ebola. In addition to this comparison its impact on Quality Management within the agricultural sector and food supply chain was also assessed. The results of these studies showcase that COVID-19 has grown exponentially in comparison to prior pandemics and will continue to do so as we enter the winter season. Agricultural equipment manufacturing companies saw a drastic decline in quarterly revenues within 2020 in comparison to 2019. Millions in net sales were lost …

Buckling Load Study On Pop Nut (Rivet) Using Finite Element Analysis, Saurabh Shankar Shegokar

Dissertations, Master's Theses and Master's Reports

This study highlights the material behavior in riveting operation that includes buckling load analysis using ABAQUS. Finite Element Analysis is used to find the buckling load vs. Displacement results and validated with the results obtained in physical testing of rivet (POP Nut). A mesh sensitivity study is performed using ABAQUS to understand the optimum mesh size for this analysis. An axisymmetric model with contact properties is created and simulated to reduce the simulation time using ABAQUS. The results obtained through Finite Element Analysis show a good resemblance with the testing results. Design changes were suggested to achieve better results that …

Radio Frequency Studies Of Soot Loading And Ammonia Storage On A Diesel Particulate Filter With A Scr Catalyst Coating, Shreyans Sethia

Dissertations, Master's Theses and Master's Reports

The radio frequency (RF) measurement technique has been shown to be a viable method for measurement of the amount of soot loaded onto DPF’s ^[1] and the amount of NH₃ stored on SCR catalysts ^[2]. In one of the configurations, a microwave resonant cavity is formed by the metal can encasing the enclosed catalyst. Two metal probes acting as antennas are placed on either side of the catalyst. Power transmitted between the antennas is monitored as the frequency of the signal is swept. At certain frequencies, resonance is achieved. Measurements of the resonance frequencies, amplitude at resonance, and …

Heterogeneous Uncertainty Quantification For Reliability-Based Design Optimization, Mingyang Li

Dissertations, Master's Theses and Master's Reports

Uncertainty is inherent to real-world engineering systems, and reliability analysis aims at quantitatively measuring the probability that engineering systems successfully perform the intended functionalities under various sources of uncertainties. In this dissertation, heterogeneous uncertainties including input variation, data uncertainty, simulation model uncertainty, and time-dependent uncertainty have been taken into account in reliability analysis and reliability-based design optimization (RBDO). The input variation inherently exists in practical engineering system and can be characterized by statistical modeling methods. Data uncertainty occurs when surrogate models are constructed to replace the simulations or experiments based on a set of training data, while simulation model uncertainty …

Using Transfer Path Analysis And Frequency Based Substructuring To Develop A Robust Vibration Laboratory Dynamic Test Fixture Design Process, Cora Taylor

Dissertations, Master's Theses and Master's Reports

The objective of this research is to determine a robust method for designing shock and vibration laboratory test fixtures that accurately reproduce the field environment for the component of interest. The methods presented in this research examine the boundary conditions presented unto the component of interest through transfer path analysis with the intent of reproducing the next-structure attachment impedance with a laboratory test fixture of one and two attachments. The first method includes only using the next-structure relative motion and stiffness to design a test fixture, while the second method uses an optimization algorithm to develop a lumped parameter model …

Experimental Evaluation Of An Rwd Vehicle With Parameter Extraction For Analytical Modeling And Evaluation, Jon Furlich

Dissertations, Master's Theses and Master's Reports

This study was conducted to perform experimental vibration testing on a light duty rear wheel drive vehicle. The vehicle is known to have excessive longitudinal acceleration response perceived after step changes in the driver torque command. The excessive response includes shuffle and clunk transients. Experimental testing was performed to understand the coupling between driver torque commands and peak shuffle oscillations. Data was also targeted to understand the coupling between driveline torsional oscillations and longitudinal vehicle vibrations. This data was also used to establish vehicle parameters for use in an analytical CAE model of the driveline and coupling. Driver applied tip-in …

Measurement Of Current Distribution In The Land Channel Direction Of A Proton Exchange Membrane Fuel Cell, Chinmay Kulkarni

Dissertations, Master's Theses and Master's Reports

A fully functional proton exchange membrane fuel cell with single land channel geometry on the cathode and segmented anode current collector with 9 mm² active area with a 350μm spatial resolution was utilized to measure the local current distribution in the land channel direction. A distinguished printed circuit board approach was used for the data acquisition to adapt to any flow field design.

Performance of this segmented cell was examined at dry, wet and moderate humidity settings to study the water transport phenomenon in the PEMFC. In the dry condition at 60 ͦ C with 0% relative humidity, the …

High-Performance Zero Liquid Discharge (Zld) Treatment Of High-Salinity Brines Using A Multiple-Effect Absorption Distillation Concept, Sunil Pinnu

Dissertations, Master's Theses and Master's Reports

State-of-the-art zero liquid discharge (ZLD) technologies are currently bound with either intensive use of high-grade electrical energy such as mechanical vacuum vapor compressors utilized in brine crystallizers or high capital cost with environmental concerns such as evaporation ponds. The present study aims to address these issues by an innovative desiccant-based ZLD system in which a multiple-effect distillation (MED) unit is uniquely embedded at the heart of an absorption-desorption system. Here, the MED and absorption systems are inherently coupled enabling both heat and mass transfer processes between a high-salinity water and a desiccant solution. The proposed technology employs an absorption-based thermally-driven …

Optimal Mission Planning Of Autonomous Mobile Agents For Applications In Microgrids, Sensor Networks, And Military Reconnaissance, Casey D. Majhor

Dissertations, Master's Theses and Master's Reports

As technology advances, the use of collaborative autonomous mobile systems for various applications will become evermore prevalent. One interesting application of these multi-agent systems is for autonomous mobile microgrids. These systems will play an increasingly important role in applications such as military special operations for mobile ad-hoc power infrastructures and for intelligence, surveillance, and reconnaissance missions. In performing these operations with these autonomous energy assets, there is a crucial need to optimize their functionality according to their specific application and mission. Challenges arise in determining mission characteristics such as how each resource should operate, when, where, and for how long. …

3d Printing Of Iron Oxide Incorporated Polydimethylsiloxane Soft Magnetic Actuator, Rasoul Bayaniahangar

Dissertations, Master's Theses and Master's Reports

Soft actuators have grown to be a topic of great scientific interest recently. As the fabrication of soft actuators with conventional microfabrication methods are tedious, expensive, and time consuming, employment of 3-D printing fabrication methods appears promising as they can simplify fabrication and reduce the production cost. Complex structures can be fabricated with 3-D printing such as helical coils can achieve actuation performances that otherwise would not be possible with simpler geometries. In this thesis development of soft magnetic helical coil actuators of iron-oxide embedded polydimethylsiloxane (PDMS) was achieved with embedded 3-D printing techniques. Composites with three different weight ratios …

Robust Multi-Objective Design Of Suspension Systems, Muhammad Ali Khan

Theses, Dissertations and Capstones

This thesis presents a robust multi-objective optimal design of four-degree-of-freedom passive and semi-active suspension systems. The passive suspension system is used in a racing car and the semi-active suspension is implemented on a passenger car. Mathematical models of the commercial and racing vehicle suspension systems are used in the computer simulations. A robust multi-objective design of the suspension systems is carried out by considering the minimization of three objectives: passenger’s head acceleration (HA), suspension deflection (SD), and tire deflection (TD). The first objective is concerned with the passenger’s health and comfort. The suspension stroke is described by SD and the …

Development Of A Process For Thermal And Mechanical Modelling Of Screw-Driven Pellets Extrusion, Kaixiang Shi

Master’s Theses

The overall goal of the thesis project is to develop a process for thermal and mechanical modelling of the screw-driven pellets extrusion process, and applying the model results to design extruder temperature and flow rate controllers.

The proposed extruder is designed for metal 3D printing. The device demonstrates great potential in tackling some of the major issues faced by the metal additive manufacturing community. It eliminates the use of metal powder for workplace and workers safety. It is able to produce end-use parts with industrial grade mechanical and microstructural properties. It utilizes low cost metal-loaded polymer pellets as feedstock. However, …

Performance Improvement Of Thermal-Driven Membrane-Based Solar Desalination Systems Using Nanofluid In The Feed Stream, Abdellah Shafieian, Muhammad Rizwan Azhar, Mehdi Khiadani, Tushar Kanti Sen

Research outputs 2014 to 2021

Different techniques have been proposed so far to improve the performance of thermal-driven membrane modules applied in solar desalination systems. These techniques have increased the freshwater productivity of the system but at the cost of its increased overall specific energy requirement. Due to this major drawback, the main objective of this study is to implement nanofluid in the feed stream of a heat pipe solar membrane-based desalination system, which not only aims to improve the freshwater productivity of the system, but also has the capability of decreasing its specific energy requirement. Synthetic seawater (with the salinity of 3.5%) was generated …