Mechanical Engineering Commons^™

Anomalous Lattice Thermal Conductivity Driven By All-Scale Electron-Phonon Scattering In Bulk Semiconductors, Z. Z. Zhou, Y. C. Yan, X. L. Yang, Yi Xia, G. Y. Wang, X. Lu, X. Y. Zhou

Mechanical and Materials Engineering Faculty Publications and Presentations

Electron-phonon coupling (EPC) has been broadly considered to govern the charge transport in solids, whereas its effect on thermal conductivity, especially for semiconductors at ambient temperatures, is a widely debated issue in condensed-matter physics. Employing state-of-the-art first-principles calculations to quantify all the possible scattering factors, we show the dominant role of EPC in phonon transport of n-doped GaSb, which yields an unprecedented reduction of lattice thermal conductivity and triggers anomalous temperature-independent behavior. The significant EPC impact hinges on the joint effect of multiple conduction pockets, large EPC strength, and bunched heat-carrying acoustic branches, provoking strong electron-phonon scattering to surpass the …

Atmospheric Carbon Capture: A Review On Current Technologies And Analysis Of Energy Consumption For Various Direct Air Capture (Dac) Systems, Jennifer Perskin

Doctoral Dissertations and Master's Theses

Carbon dioxide (CO₂) capture is a crucial approach to reducing greenhouse gases in the atmosphere to directly combat climate change. Major components of the technology to desublimate CO₂ at cryogenic temperatures are mature and have the potential to be applied to build large Arctic/Antarctic direct-air CO₂ capture plants. Pressure swing adsorption another gas separation technique used in industry today that can be modified for atmospheric carbon capture. The discussion of energy consumption for cryogenic and combined direct air capture systems is explored in this study. The investigation of precompression of atmospheric air for a direct-air capture …

Deep Learning Of Semantic Image Labels On Hdr Imagery In A Maritime Environment, Charles Montagnoli

Doctoral Dissertations and Master's Theses

Situational awareness in the maritime environment can be extremely challenging. The maritime environment is highly dynamic and largely undefined, requiring the perception of many potential hazards in the shared maritime environment. One particular challenge is the effect of direct-sunlight exposure and specular reflection causing degradation of camera reliability. It is for this reason then, in this work, the use of High-Dynamic Range imagery for deep learning of semantic image labels is studied in a littoral environment. This study theorizes that the use HDR imagery may be extremely beneficial for the purpose of situational awareness in maritime environments due to the …

Multiscale Damage Modelling Of Notched And Un-Notched 3d Woven Composites With Randomly Distributed Manufacturing Defects, S.Z.H. Shah, Juhyeong Lee, P.S.M. Megat-Yusoff, Syed Zahid Hussain, T. Sharif, R.S. Choudhry

Mechanical and Aerospace Engineering Faculty Publications

This work proposes a stochastic multiscale computational framework for damage modelling in 3D woven composite laminates, by considering the random distribution of manufacturing-induced imperfections. The proposed method is demonstrated to be accurate, while being simple to implement and requiring modest computational resources. In this approach, a limited number of cross-sectional views obtained from micro-computed tomography (µCT) are used to obtain the stochastic distribution of two key manufacturing-induced defects, namely waviness and voids. This distribution is fed into a multiscale progressive damage model to predict the damage response of three-dimensional (3D) orthogonal woven composites. The accuracy of the proposed model was …

The Future Is Now In Twisted Coil Polymer Actuators (Tcpa), Ryan Ronquillo

Electronic Theses and Dissertations

This thesis aimed to fabricate and test twisted coiled polymer actuators (TCPA) to understand the mechanical and thermal aspects of this artificial muscle fiber. The purpose of this thesis was to find a linear relationship using the LVDT sensor, fabricating TCPA fibers, and interpreting the data. The project tested whether nylon/polymer could be used as a better artificial muscle fiber.

This research accomplished three goals: (1) designing and fabricating a system capable of creating supercoiled muscle fibers consistently, (2) calibrating the Linear Variable Differential Transformer (LVDT) and Core, and (3) analyzing/interpreting the data of the Twisted Coiled Polymer Actuators (TCPA) …

Steam Gasification Of Biochar To Produce Hydrogen-Rich Syngas, Nnamdi Ofuani

Honors College Theses

A key greenhouse gas (GHG) emission contributing to climate change is carbon dioxide (CO₂) emission. This emission is largely due to the use of fossil fuel as a major energy source. Biomass is an alternative energy source. Biochar, a byproduct of the pyrolysis process (of biomass), could be gasified to produce syngas (a mixture of CO and H₂). This syngas can further be used to produce different kinds of fuels like biodiesel, bio-gasoline, bioethanol, etc. In the steam gasification of biochar, the quality and yield of syngas is dependent on parameters such as temperature, particle size, …

Self-Assembly Of Exfoliated Graphene Flakes As Anticorrosive Coatings For Additive Manufactured Steels, Kaleb Hood, Wen Qian, Yi Xia, Savannah Krupa, Annie Dao, Sarah Ahmed, Samuel Olson, Nam Nguyen, Joseph A. Turner, Jun Jiao

Department of Mechanical and Materials Engineering: Faculty Publications

This study demonstrates the feasibility of using liquid exfoliation of expandable graphite into multilayer exfoliated graphene flakes (EGFs) to form a self-assembled thin film on an air–water interface. The film can coat the surface of additive manufactured (AM) steel substrates to enhance surface properties, specifically AM 316 stainless-steel (AM316), AM 8620 steel (AM8620), and samples of the same alloys made by conventional manufacturing (CM) processes. Liquid exfoliation offers a high yield route for an EGF coating that can cover up to 95% of the sample surface with a single application. The thin, flexible EGFs can coat a rough AM metal …

Exploring Methods For Recycling Filament Waste In 3d Printing, Max Rios Carballo

Publications and Research

The goal of the current study is to investigate cutting-edge techniques for recycling filament waste from 3D printing procedures. Appropriate waste management techniques are required to reduce this trash's harmful environmental consequences. The goal of the project is to look at new methods for recycling filament waste in order to minimize disposal and encourage reuse. To acquire data from pertinent papers and research, a thorough literature review methodology was used. The findings show that this issue may be resolved utilizing a variety of recycling techniques, including shredding, melting, and re-extrusion. The type of filament waste and the intended goal will …

Utilization Of Machine Learning To Investigate Material State, Ana B. Abadie

Honors College Theses

The ability to predict material behavior that undergoes various loading conditions is critical to the development of reliable and safe components. Thermal and mechanical fatigue loading can cause significant damage to materials, leading to failure and potential safety hazards. Machine learning algorithms have emerged as a promising tool for improving accuracy and efficiency of predicting material behavior under such loading conditions. This research provides a comprehensive overview of a machine learning algorithm that is able to analyze and predict material state independently of the loading sequence. Unidirectional carbon fiber reinforced polymer (UD CFRP) composite which has undergone two different loading …

A Proof-Of-Concept Study For An Elastohydrodynamic Seal Design, Cameron M. Stuart

Honors College Theses

Supercritical CO₂ (sCO₂) power cycles are superior to traditional water based, air-breathing, direct-fired, open Brayton cycles or indirect-fired, closed Rankine cycles in terms of efficiency and equipment size. They hold great potential in fossil fuel power plants, nuclear power production, solar power, geothermal power, and ship propulsion. To unlock the potential of sCO₂ power cycles, utilized technology must withstand 10–600 MWe and at sCO₂ temperatures and pressures of 350–700℃ and 20–35 MPa for nuclear industries. Amongst many challenges at the component level, the lack of suitable shaft seals for sCO₂ operating conditions needs to …

Multi-Mode Total Focusing Method (Mtfm) To Detect High-Temperature Hydrogen Attack (Htha) – A Review, Anjar Oktikawati, Rini Riastuti, Nursidi Yuanto

Journal of Materials Exploration and Findings

High temperature hydrogen attack (HTHA) is a commonly observed harm component in carbon steels exposed to high temperature and pressure in a hydrogen-rich environment. Hydrogen together with carbon responds to produce methane. The formation of methane bubbles in steel can lead to loss of fracture toughness and lead to intergranular cracking. The main challenge of this problem lies in early warning systems that can detect these bubble clusters before they reach the advanced stage. Several advanced ultrasonic inspections have been developed over the years due to the challenges of inspecting materials for defects and discontinuities. These cover time-of-flight diffraction (ToFD), …

Estimating Remaining Life And Fitness-For-Services Evaluation Of Fuel Piping Systems, Sekar Putri Purwidyasari, Ahmad Isni Kurniawan, Deni Ferdian

Journal of Materials Exploration and Findings

Assets life extension are required to predict the design life expiry based on condition and effects of deterioration. The remaining life assessment will answer the questions about timing of the component or equipment will lead to failure and shall be evaluated by inspection and maintenance monitoring. This study elaborates process calculation and analysis by using remaining life assessment and fitness for services method according to API 579-1/ASME FFS-1 for process piping area. The result of remaining useful life estimation and estimated life has been proposed. There are 11 piping systems based on the condition monitoring with thickness measurements. The result …

How Automation Is Making A Positive Impact On The Fast Food Industry, Noah Bullock

Graduate Dissertations and Theses

As the fast food industry has rapidly evolved, so has the use of technology within these businesses. Artificial intelligence is something that is being used in these fast-food restaurants to drive change. With restaurants adding artificial intelligence into their business model, many of their goals have changed. Restaurants are now having the goal of improving their speed and accuracy when it comes to order taking, enhancing the customer experience, and reducing their costs. All of which are attainable through the use of artificial intelligence. Though businesses are now using artificial intelligence; there are many concerns about the downsides that come …

Understanding The Effect Of Nanointerfaces On Nanostructure And Mechanical Properties Of Semicrystalline Polymers Using Coarse-Grained Molecular Dynamic Simulations, Nayoung Kim

Honors College Theses

Polymer crystallization is a classical problem of polymer research. Many synthetic and natural polymers take the semi-crystalline form. Crystallization of polymers is a complex process associated with the partial alignment of their molecular chains. The final physical properties of semicrystalline polymers are determined by the degree of crystallinity and the size and orientation of the crystallites (nano- to micro-sized crystalline regions). Although it has been studied for many years, we still lack a fundamental understanding of the types of factors that influence the semicrystalline structure and how the structure affects the final properties. It is difficult because crystalline polymers are …

A Proof Of Concept For Detection Of Palato-Lingual Contact Without Intraoral Electrodes In A Human Participant, Amitava Biswas

Master's Theses

The author of this thesis conceived and investigated an unexpected electrical signal that may not be noticed during regular electroglottography (EGG) when electrodes are conventionally placed on the anterior surface of the throat. It appears that there is a measurable electrical signal from the EGG equipment when electrodes are placed over the frontal cheek (belly of zygomatic muscle), and the tongue is elevated to contact the hard palate, or the tongue is lowered to break the contact. Therefore, this phenomenon is designated as unconventional electroglottography (UEGG, Dr. Steven Cloud, private communication, July 17, 2022).

Two distinctive patterns of waveforms were …

A Deep-Learning Framework For Spray Pattern Segmentation And Estimation In Agricultural Spraying Systems, Praneel Acharya, Travis Burgers, Kim-Doang Nguyen

Mechanical Engineering Faculty Publications

This work focuses on leveraging deep learning for agricultural applications, especially for spray pattern segmentation and spray cone angle estimation. These two characteristics are important to understanding the sprayer system such as nozzles used in agriculture. The core of this work includes three deep-learning convolution-based models. These models are trained and their performances are compared. After the best model is selected based on its performance, it is used for spray region segmentation and spray cone angle estimation. The output from the selected model provides a binary image representing the spray region. This binary image is further processed using image processing …

Structure And Movement Design To Build A Functional Prosthetic Hand, John Campbell

Honors College Theses

This project aims to create a functional prosthetic hand that will improve upon the previous design for this project. The previous design included four fingers which were moved using a four-bar linkage and slider crank mechanism in combination with a linear actuator to move all four fingers in unison. Two servo motors were used to create an opposable thumb that could be used to grasp objects. Movement of the prosthetic hand was activated using a signal received from a myoelectric sensor. The goal of this project is to study this design and attempt to upgrade the prosthetic hand utilizing a …

Compounding And Melt Blending/Extrusion Of Polyether Ether Ketone (Peek) And Amorphous Magnesium Phosphate (Amp) For Fused Deposition Modelling (Fdm) Based 3d Printing, Vijay Kumar Bokam

ETD Archive

Polyether ether ketone (PEEK) is a high-performance polymer material for developing implants for orthopedic, spinal, cranial, maxillofacial, and dentistry applications. However, the major limitation of PEEK implants is their bio-inertness, i.e., their incapability to integrate with tissues. Therefore, prior efforts have always focused on developing Hydroxyapatite (HA) coatings on PEEK or PEEK-HA composites or sulfonation of PEEK surface or plasma treatment. As opposed, in this study, we engineered a highly novel bio-ceramic known as amorphous magnesium phosphate (AMP), which surpasses the bioactivity and biodegradation kinetics of HA. In this study, we employed High energy planetary ball milling, a mechanical alloying …

Evaporation And Condensation From Epiphytes During Saturated Conditions In A Maritime Live-Oak Forest (Georgia, Usa)., Akosh Raffai

ETD Archive

Most of the rain that falls over land, falls over forests, which cover approximately one-third of global land surface. Significant immediate and wide-ranging impacts are exerted on hydrological, ecological, and societal systems due to canopyrainfall interactions, altering rainwater supply to the surface. All storm-related hydrological processes are impacted by the relative rates that canopy surfaces retain, evaporate, and redistribute rain. Many forest canopies host a community of plants called epiphytes that are generally capable of storing and evaporating substantial water. Epiphytes are comparatively under-researched regarding their role in rainfall partitioning compared to bark and leaves. Skidaway Island in Savannah, Georgia, …

Exploration Of Collaborative Design Spaces: Engineering Interactions And Workflows In Product Development, Frederick Rowell

Honors College Theses

Product Lifecycle Management (PLM) initiatives can improve an enterprise’s efficiency by increasing collaborative design opportunities within its business structure. PLM solutions provide digital mediums to collaborate on all aspects of a company’s workflow, including engineering, testing, manufacturing, marketing, business, and field support services. This paper examines the major PLM tools and software used to establish a collaborative engineering design space; computer-aided design (CAD), computer-aided engineering (CAE), computer-aided manufacturing (CAM), and product data management (PDM). The interactions between these PLM tools and a design team’s organizational structure are analyzed to determine some of the most effective PLM integration strategies to improve …

In-House Processing Of Carbon Fiber Reinforced Polyetheretherketone (Cfr-Peek) 3d Printable Filaments And Fused Filament Fabrication Of Cfr-Peek Parts, Harsha Phanindra Sai Naganboyina

ETD Archive

PEEK is a high-performance polymer known for its exceptional mechanical properties, making it suitable for various applications; however, for certain demanding applications such as automotive, PEEK does not exhibit the required strength. Moreover, if the PEEK parts are developed by Fused Filament Fabrication (FFF)-based 3D Printing, there is a high chance of having PEEK parts with decreased mechanical properties. Carbon Fiber (CF) reinforcement is a well-known method of mitigating the low mechanical properties of PEEK. Hence, in the present study, we attempted to develop CF-reinforced PEEK (CFR-PEEK) parts via FFF. First, we developed homogeneous CFR-PEEK mixtures via ball milling and …

Improving Tribological Properties Of Polydopamine/Polytetrafluoroethylene Coatings Through Incorporating Core-Shell Nanoparticles And Laser Surface Texturing, Firuze Soltani-Kordshuli

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a widely used polymer that has unique properties such as chemical and temperature resistance, corrosion resistance, low maintenance cost, and a very low coefficient of friction (COF). These distinctive properties have made PTFE a promising candidate for industrial applications where surfaces are in relative motion. PTFE can be utilized as a thin film solid lubricant to significantly reduce the friction between moving surfaces. However, PTFE coatings have low cohesion and poor adhesion to the substrate resulting in its low wear resistance. This fact limits the application of PTFE coatings in load-bearing situations. To address these limitations, an …

Pda/Ptfe Solid Lubricant Coating For 60niti Applications, Charles Richey Miller

Graduate Theses and Dissertations

The intermetallic alloy 60NiTi has a unique combination of high hardness and low elastic modulus, which makes it highly resistant to dents. Additionally, 60NiTi is extremely corrosion resistant and chemically inert. These properties make 60NiTi a desirable material for challenging mechanical component applications with high contact stresses and in harsh environments. However, lubrication issues have hindered the use of 60NiTi because it has poor tribological performance if it is not properly lubricated. The mechanical properties of hardened 60NiTi and its microconstituents were studied by nanoindentation. This study showed that the bulk properties of 60NiTi are driven by the properties of …

Design And Data-Driven Identification Of A Quadruped Robot, Dakota Rufino

All Theses

The existence of nonlinearities and the lack of sufficient equations are fundamental challenges in modeling, analyzing, and controlling complex systems. However, recent developments revolutionizing the study of dynamical systems. An emerging method in nonlinear dynamical systems is the Koopman operator theory, which provides us with key advantages in performing the modeling, prediction, and control of nonlinear systems. The linear system representation allows us to leverage linear stability analysis. The first section of this thesis briefly covers the construction of a quadrupedal robot, a sufficiently complex nonlinear dynamical system, for the use of analyzing data-driven modeling techniques. The second section details …

Enhancing Microstructure, Composition Homogeneity, And Mechanical Properties In Laser Powder Bed Fused Metallic Alloys: Design, Fabrication, And Evaluation, Bahzad Farhang

Mechanical and Aerospace Engineering Dissertations - Archive

ABSTRACT: Over the past five decades, Nickel-based and Titanium-based alloys have become increasingly popular materials. As the manufacturing industry for these alloys has advanced, the demand for fabricating complex parts with enhanced mechanical properties at elevated temperatures has grown. Laser Powder Bed Fusion (LPBF), one of the most prevalent additive manufacturing techniques, has been employed successfully to produce these alloys. Nonetheless, there is still considerable effort being made to improve the microstructural, compositional, and mechanical properties of LPBF-processed components. In this study, we focused on adjusting the multi-scale microstructure and composition of LPBF-fabricated Nickel-based and Titanium-based alloys. The first objective …

Theoretical And Numerical Analysis Of Thermal Runaway Propagation In Li-Ion Battery Packs, Dhananjay Mishra

Mechanical and Aerospace Engineering Dissertations - Archive

Strategies to prevent or minimize propagation of thermal runaway in a pack of Li-ion cells are critically needed to ensure safe operation, storage and transportation. While significant literature already exists on thermal runaway simulations, several key questions of practical relevance have remained unaddressed. This work presents multi-mode heat transfer simulations to predict the onset and propagation of thermal runaway in a pack of cylindrical Li-ion cells. The impact of inter-cell gap and thermal properties of the interstitial material on onset and propagation of thermal runaway is studied. It is shown that high interstitial thermal conductivity promotes thermal runaway propagation. However, …

Steady State And Transient Analysis Of Heat Transfer In A Porous Fin With Radially Outwards Pressure-Driven Flow, Muhammad Mehdi Abbas

Mechanical and Aerospace Engineering Theses - Archive

Thermal management and energy storage problems often utilize extended surfaces, also known as fins for enhanced heat transfer. Today fins are used in a wide range of devices including but not limited to microelectronic components and large heat exchanger. Traditional fins as well as porous fins with flow orthogonal to fin direction have been subject of past research. There is very few academic literature available on porous fins with pressure driven flow along fin direction. While thermal conduction is usually the dominant mode of heat transfer in a solid fin, the use of porous fins that include advective thermal transport …

Development Of Vortex Box (Vbox) And Vortex Tip (Vtip) Filament Free-Wake Rotor Models, Casey Will Matsler

Mechanical and Aerospace Engineering Theses - Archive

Rotor models span from simple static and first order expressions to high fidelity, numerical computations and across the spectrum each model is good for different purposes. The use of models has improved with time and technological capability but choosing the right model for the task is important. A survey of rotor models is performed to identify a rotor model flexible enough for providing high to moderately high-fidelity results without significantly sacrificing computational time. The model chosen is intended to be for general purposes and applicable across a wide range of operating conditions. From the survey, a blade element rotor model …

Evaluation Of Solder Alloys For Bga Package: A Comparative Reliability Study Using Ansys Computational Analysis, Yashvanth Muthegowda

Mechanical and Aerospace Engineering Theses - Archive

Temperature cycling failure of solder joints in Ball Grid Array (BGA) packages has become a critical issue in electronic manufacturing. This thesis specifically characterizes three different lead-free solder alloys (Pure Indium, SAC-387, and SAC-Q) in BGA solder joints using two different printed circuit board (PCB) thicknesses (1mm and 0.7 mm). The analysis considers the non-uniform temperature distribution caused by the main heat source, the die, and the resulting deformation of the package due to the mismatch in the coefficient of thermal expansion (CTE) between components used in BGA. Finite element (FE) models are created in ANSYS mechanical package environment to …

Advancement Of An Inhouse Aerospace Vehicle Design Synthesis System Through The Introduction Of A Novel Database-Knowledgebase System And By Improving The Geometry And Aerothermodynamic Disciplinary Processes, Samuel Atchison

Mechanical and Aerospace Engineering Theses - Archive

Throughout the years of aerospace vehicle design, the process in which a vehicle is designed has drastically improved from being primarily developed through trial and error, to using sophisticated synthesis systems. While the trial-and-error process had its uses with providing the fundamental knowledge of how aircraft behave and can be designed, the increase in knowledge and technology allowed the possibility of more vehicle configurations to be explored without the need to build each one. This increase should have led to a revolution of vehicle designs, and while there have been some novel ones, it seems that the general design of …