Mechanical Engineering Commons^™

Lithium-Ion Conductive Coatings For Nickel-Rich Cathodes For Lithium-Ion Batteries, Yijia Shao, Jia Xu, Amardeep Amardeep, Yakang Xia, Xiangbo Meng, Jian Liu, Shijun Liao

Mechanical Engineering Faculty Publications and Presentations

Nickel (Ni)-rich cathodes are among the most promising cathode materials of lithium batteries, ascribed to their high-power density, cost-effectiveness, and eco-friendliness, having extensive applications from portable electronics to electric vehicles and national grids. They can boost the wide implementation of renewable energies and thereby contribute to carbon neutrality and achieving sustainable prosperity in the modern society. Nevertheless, these cathodes suffer from significant technical challenges, leading to poor cycling performance and safety risks. The underlying mechanisms are residual lithium compounds, uncontrolled lithium/nickel cation mixing, severe interface reactions, irreversible phase transition, anisotropic internal stress, and microcracking. Notably, they have become more serious …

Presence Of Atheromatous Plaques And Theirs Effects On The Blood Flow, Belhocine Mostefa Bm, Amrani Hichem Ah, Fedaoui Kamel Dr, Mazouz Hammoudi Mh

Emirates Journal for Engineering Research

The paper utilizes a finite element method to study both the blood flow and atheromatous plaques. Specifically, the COMSOL finite element package is employed to achieve a fluid model. COMSOL is a powerful finite element tool commonly used in various research and industrial domains to study multiphysics problems. The focus of the investigation is on the geometric aspects of the atheromatous plaques. The study considers different forms and arrangements of stenosis, taking into account the irregularities formed by various shapes of the plaques and the resulting flow patterns. The key findings of the research suggest that the pressure and velocity …

Application Of Biochar / Bentonite Based Admixtures In Reinforced Concrete For Corrosion Prevention, Jacob Fleury

Graduate Theses & Non-Theses

Reinforced concrete systems are in many sectors of infrastructure. Due to a combination of elevated compressive strength from the cement and aggregates and tensile strength from the reinforcing steel, reinforced systems are favorable in construction applications where high strength is desired. However, while reinforced concrete is in service, it can be introduced to contaminants that cause corrosion. Contaminants can leach through the porous matrix of the concrete structure and influence initiation of corrosion products on reinforcement. Corrosion is the primary cause for advanced deterioration of concrete structures. Concrete deterioration has promoted research efforts for the protection of future systems. This …

Analyzing Heat Generated From Electro-Osmotic Flow Utilizing Computational Fluid Dynamics, Jordan Elizabeth Grothe

Honors Thesis

Without extensive vascularization, the transfer of fluid and nutrients through human tissue is limited to diffusion and weak interstitial flow. Electroosmosis, or the flow of fluid driven by an electrical field, has become a promising solution. Scientists have begun applying electricity to human tissue to promote stronger interstitial flow; however, optimization of this process has proven to be a challenge due to ohmic heating. Cells function within a small range of temperatures and exposure to voltages exceeding the threshold will cause cells to degrade and die prematurely. This research seeks to better understand and quantify the range of voltage where …

A Redox-Reversible A/B-Site Co-Doped Bafeo3 Electrode For Direct Hydrocarbon Solid Oxide Fuel Cells, Haixia Li, Wanhua Wang, Kai Zhao, Ka-Young Park, Taehee Lee, Ramin Babazadeh Dizaj, Andreas Heyden, Dong Ding, Fanglin Chen

Faculty Publications

Solid oxide fuel cells (SOFCs) can directly convert the chemical energy in fuel to electrical energy with fuel flexibility; however, the conventional nickel-based anodes face great challenges due to coking upon direct oxidation of hydrocarbon fuels and redox instability. Thus, developing new anode materials which can provide high coking resistance as well as redox stability is crucial. In this work, Ba_0.6La_0.4Fe_0.8Mo_0.1Ni_0.1O_3−δ (BLFMN) has been synthesized in air using a sol–gel combustion method, resulting in a dual phase consisting of a cubic BLFMN main phase and scheelite BaMoO_{4 …}

Comparative Analysis Of Cutting Forces In Axial-Compliant And Rigid Chamfering Tools, Sultonmurod Bekpulatovich Normatov, Oybek Tuyboyov, Azimjon Axror O'G'Li Pardayev, Alisher G‘Ayratjon Ogli Boratov, Shohjahon Tuxtasin Ogli Abdullayev

Technical science and innovation

This study delves into the analysis of cutting forces in axial-compliant systems, focusing specifically on the comparison between axially spring-compensated 90° conical tools and rigid chamfering tools. The research incorporates a predictive model for chamfer size calculation in the axially spring-compensated tools, verified through experimental tests on representative parts. The study aims to control chamfer size within tolerances by adjusting process conditions and optimizing processing efficiency. By exploring the fundamentals of the chamfering process, this research offers insights into breaking sharp edges on components with positional errors and shape deformations, with a particular emphasis on aero-engine casings. The integration of …

Data-Driven And Cell-Specific Determination Of Nuclei-Associated Actin Structure, Nina Nikitina, Nurbanu Bursa, Matthew Goelzer, Madison Goldfeldt, Chase Crandall, Sean Howard, Janet Rubin, Anamaria Zavala, Aykut Satici, Gunes Uzer

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Quantitative volumetric assessment of filamentous actin (F-actin) fibers remains challenging due to their interconnected nature, leading researchers to utilize threshold-based or qualitative measurement methods with poor reproducibility. Herein, a novel machine learning-based methodology is introduced for accurate quantification and reconstruction of nuclei-associated F-actin. Utilizing a convolutional neural network (CNN), actin filaments and nuclei from 3D confocal microscopy images are segmented and then each fiber is reconstructed by connecting intersecting contours on cross-sectional slices. This allows measurement of the total number of actin filaments and individual actin filament length and volume in a reproducible fashion. Focusing on the role of F-actin …

Non-Contact Wind Turbine Blade Crack Detection Using Laser Doppler Vibrometers, Ali Zabihi, Farhood Aghdasi, Chadi Ellouzi, Nand Kishore Singh, Ratneshwar Jha, Chen Shen

Henry M. Rowan College of Engineering Departmental Research

In response to the growing global demand for both energy and a clean environment, there has been an unprecedented rise in the utilization of renewable energy. Wind energy plays a crucial role in striving for carbon neutrality due to its eco-friendly characteristics. Despite its significance, wind energy infrastructure is susceptible to damage from various factors including wind or sea waves, rapidly changing environmental conditions, delamination, crack formation, and structural deterioration over time. This research focuses on investigating non-destructive testing (NDT) of wind turbine blades (WTBs) using approaches based on the vibration of the structures. To this end, WTBs are first …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Physics Undergraduate Honors Theses

Mechanical Exfoliation

Dna/Carbon Nanotube Hybrid Structure And Their Translocation Through A Nanochannel, Daniel Christoffel Viljoen

Graduate Theses and Dissertations

DNA sequencing is of major importance as it is used in fields such as species differentiation, personalized medicine and food safety. Currently sequencing by synthesis is the most popular commercial method of sequencing DNA while Oxford nanopore’s protein based nanopores are the only portable commercial method. Current nanopore based devices have three main issues: Spacial resolution, translocation rate versus sensor strength and dealing with the persistence length of ssDNA. This thesis contributes to ongoing research that aims to create a nanochannel with integrated sensor based sequencing device. The project has two main objectives. The first objective is to improve the …

Cam And Design For Manufacturing: Developing A Project-Based Learning Course, Stephen Pierson

Mechanical Engineering Undergraduate Honors Theses

To effectively serve student career success, mechanical engineering programs must teach students how to account for manufacturing considerations in design. Despite this, manufacturing education is a glaring area of need in current engineering curricula. In fact, basic manufacturing knowledge is one of the only hard skills consistently ranked as one of the greatest weaknesses of mechanical engineering hires in surveys of industrial employers over the last few decades. Without radically changing departmental curriculum to include more emphasis on design-build projects, one solution to combat this is to incubate a lab course in mechanical engineering programs in which undergraduates would practice …

Numerical Investigation Of Supersonic Flow Over A Wedge By Solving 2d Euler Equations Utilizing The Steger–Warming Flux Vector Splitting (Fvs) Scheme, Mitch Wolff, Hashim H. Abada, Hussein Awad Kurdi Awad Kurdi Saad

Mechanical and Materials Engineering Faculty Publications

Supersonic flow over a half-angle wedge (θ = 15°) with an upstream Mach number of 2.0 was investigated using 2D Euler equations where sea level conditions were considered. The investigation employed the Steger–Warming flux vector splitting (FVS) method executed in MATLAB 9.13.0 (R2022b) software. The study involved a meticulous comparison between theoretical calculations and numerical results. Particularly, the research emphasized the angle of oblique shock and downstream flow properties. A substantial iteration count of 2000 iteratively refined the outcomes, underscoring the role of advanced computational resources. Validation and comparative assessment were conducted to elucidate the superiority of the Steger–Warming flux …

Rasc-Al Large Scale Lunar Crater Prospector, Austin Arnold, Coleman Alvarez, Mark Suberu

Senior Design Project For Engineers

The purpose of this project is to design a conceptual layout of a lunar rover capable of exploring craters at the lunar south pole. The rover should be autonomous and capable of self-sustainment for at least one year in extreme cold and darkness. While determining the location and accessibility of water ice and other volatiles within the crater. This document will contain all information related to the team's conceptual design. Including research, component selection, electrical design, and mechanical design.

Lunar Rascals Video: https://www.youtube.com/watch?v=MdcjzVMtzaI

Implementation Of Explainable Ai For Bearing Fault Classification, Mohammad Mundiwala

Honors Scholar Theses

It is difficult to overstate the impact of artificial intelligence (AI) over the past decade. The rapid expansion of machine learning has stimulated a race to deploy AI in all facets of life, one such domain being machine health monitoring. There is no doubt that machine learning excels in prediction accuracy, but oftentimes, these models are cryptic and fail to provide valuable insight into their decisions. This paper presents an overview of a neural network and what it means to learn. Next, two distinct Explainable AI (XAI) techniques will be presented: Gradient Class Activation Mapping and SimplEx . Finally, these …

Modeling Vibration Stiffness: An Analytical Extension Of Hertzian Theory For Angular Contact Bearings With A Thin Viscoelastic Coating, Davis R. Burton

Honors Theses

This thesis considers the novel angular contact rolling-element bearings proposed by NASA’s Glenn Research Center, which are coated with a thin solid lubricant that exhibits viscoelastic behavior. Current analytical models for the dynamic stiffness matrix of angular contact bearings, critical for vibration analysis, lack the ability to model the effects of a solid coating, as well as the time dependencies inherent in viscoelastic theory. The author first presents an overview of the stiffness matrix derivation, followed by a treatment of the underlying Hertzian contact theory. An analytical extension of this theory is proposed which accounts for a thin elastic layer …

Flow Characterization With Acoustic Emission Sensing, Jackson Marsh

Mechanical Engineering Undergraduate Honors Theses

Acoustic emissions (AE) allow for non-intrusive sensing into many types of systems. In systems where there is flow of some type, AE is very useful as these types of systems can be characterized in many ways from the collisions or creation of the flow. Correctly setting up the AE system is extremely important. Failure to do so results in imprecision and inaccurate data being collected. Because of this synchronization techniques, sensor configurations, and data acquisition systems must all align. This can be done with off-the-shelf, commercial systems, but this does not allow for customization and the ability to tailor the …

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In a post-9/11 world, hostile actors are using vehicles as weapons to inflict civilian casualties. Pedestrians, vulnerable road users, military personnel, and police may be targeted using a vehicle as a weapon. The United States Department of Defense (DoD) also utilizes Entry Control Facilities (ECFs) which are carefully designed transportation corridors to manage how threat vehicles are able to access military facilities. In 2004, DoD started to upgrade all ECFs using both passive and active barriers. Many anti-ram vehicle barriers were evaluated according to the criteria established in ASTM F2656, but to date few options are available which are (1) …

Digital Twin In Military Ground Vehicles: Design And Predictive Maintenance, Conner W. Eddy

All Theses

Digital twin technology builds upon virtual engineering models, computer simulation, and real-time field data streaming to enable next-generation designs and predictive maintenance. A digital twin is a computer-based high-fidelity collection of models that predicts the performance of dynamic systems per operating cycles, input feature parameters, and data communication from a physical plant. Product Lifecycle Management (PLM) is growing in importance and is central to virtual design processes where the digital twin toolset fits into this emerging architecture. The product design process can be advanced using digital twin resources by eliminating the need for, and cost from, continual physical prototyping, reliability …

Improved Ballistic Impact Resistance Of Nanofibrillar Cellulose Films With Discontinuous Fibrous Bouligand Architecture, Colby Caviness

All Theses

Natural protective materials offer unparalleled solutions for impact-resistant material designs that are simultaneously lightweight, strong, and tough. Particularly, the dactyl club of mantis shrimp features chitin nanofibrils organized in a Bouligand structure, which has been shown to effectively dissipate high-impact energy during powerful strikes. The mollusk shells also achieve excellent mechanical strength, toughness, and impact resistance with a staggered, layer-by-layer structure. Previous studies have shown that hybrid designs, by combining different bioinspired microstructures, can lead to enhanced mechanical strength and energy dissipation capabilities. Nevertheless, it remains unknown whether combining Bouligand and staggered structures in nanofibrillar cellulose (NFC) films, forming a …

Towing Tank Trials Of Hydrokinetic Turbine Scale Model To Support Marine Energy System Verification, Shahab Rouhi

LSU New Orleans Theses and Dissertations

In response to the escalating demand for sustainable energy solutions and the critical reevaluation of conventional fossil fuels due to environmental concerns, this dissertation embarks on a comprehensive exploration of hydrokinetic energy as a promising alternative. The study delves into the underexplored domain of hydrokinetic energy, leveraging innovative methodologies for effective utilization and harnessing, particularly through the development and investigation of hydrokinetic turbines.

In the realm of hydrokinetic energy conversion, our research has exclusively concentrated on horizontal-axis turbines, distinct from other turbine configurations. Noteworthy is the adaptation of a conventional horizontal-axis wind turbine for water currents, revealing enhanced performance through …

Summonable Construction Delivery Robot, Kevin M. Lewis

Honors Capstones

In many different construction industries, there is a need for tools, parts, and other necessary items to be transported quickly and efficiently over various types of terrain. Human resources have often been used to address these needs, which can become very time and cost inefficient over long periods. The design proposal here is aimed at addressing this need by developing an autonomous outdoor mobile robot based on a quadrupedal robot design. This approach differs by incorporating a wheeled and quadrupedal hybrid actuation system that provides terrain negotiation and speed at the appropriate times. The team uses Robot Operating System (ROS) …

Spatial Hearing In Simulated Reverberant Classroom Environments, Gabriel Seth Evan Weeldreyer

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Spatial hearing provides access to auditory spatial cues that promote speech perception in noisy listening situations. However, reverberation degrades auditory spatial cues and limits listeners’ ability to utilize these cues for segregating target speech from competing babble. Hence, spatial unmasking—an intelligibility benefit from a spatial separation between a target and masker—is reduced in reverberant environments as compared to free field. This work tests the hypothesis that interaural decorrelation, the result of increasing reverberation, will broaden the perceived auditory source width with a cascading effect of reduced auditory spatial acuity and subsequently poorer spatial unmasking. To understand the perceptual consequences of …

Mechanical Engineering Capstone: A Reflection On The Design And Prototyping Of A Portable Water Heating System, Timothy Goldsmith

Honors Program: Senior Projects (Public)

This thesis includes several documents from a Mechanical Engineering Capstone course. These include project postmortem reports written at the conclusion of each term. These reports summarize the designing and prototyping of a portable water heating system. Additionally, this thesis includes written feedback on the final presentations for six other senior design teams. In these documents, presentations and projects are evaluated and encouragement and feedback are provided for the teams. The final component of this thesis is an essay reflecting on the different leadership roles assumed during the capstone course.

Multifunctional Surfaces By Ultrafast Laser Multiscale Surface Structuring, Kewei Li

All Dissertations

Surface structures are crucial for regulating surface functions, including self-cleaning, surface coloration, and anti-fouling, which are of significance in various applications such as prolonging the lifetime of the solar cells, anti-counterfeiting marking, and enhancing the vessel’s performance. Ultrafast laser technology emerges as a revolutionary approach for surface structuring, distinguished by its exceptional precision, high throughput, versatility across materials, and remarkable processing efficiency. Despite the intensive study in the ultrafast laser surface structuring area, the fundamental mechanisms accounting for the ultrafast laser-induced surface structures are still not well understood. The correlation among laser processing parameters, surface structures, and surface functions remains …

Effects Of Process-Induced Defects On The Corrosion Of Additively Manufactured Stainless Steel 304l, Leila Saberi, Frank W. Liou, Mehdi Amiri

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This Study Investigates the Impact of Process-Induced Defects Such as Gas Pores, Lack of Fusions, and Surface Roughness on Corrosion Behavior of Stainless Steel 304L (SS304L) Fabricated by Laser Powder Bed Fusion Additive Manufacturing. Specimens Are Printed with Optimized Process Parameters but Selected from Different Locations on the Build Plate. Parallel and Perpendicular Surfaces to the Build Direction Are Investigated and Compared with Corrosion Properties of Wrought SS304L in 5 Wt% NaCl. the Results Reveal Significant Difference in Corrosion Behavior among Specimens Due to Variations in their Defect Features. Pitting Potential, Pit Initiation, and Growth Rates Are Found to Be …

Investigation On The Effects Of Biofouling On The Boundary Layer, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This study is an investigation of the effect of biofouling on the boundary layer of a flat plate and a NACA 4-digit series foil. Three identical hydrofoils made of resin were placed in the Gulf of Mexico at Grand Isle, Louisiana, and observed and analyzed by marine biologists at the University of New Orleans for their species composition. The resulting biofouling that grew was primarily made up of barnacles and bryozoans. The foils were submerged in an open channel flume at zero incidence and subjected to a series of experiments whose arc-length Reynolds numbers ranged from approximately 13000 to 32000. …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

Large Eddy Simulation Of Fluid Mixing In Migadome Facility For The Astfe Nuclear Thermal Hydraulics Cfd Competition, Kolten Strauss

Mechanical Engineering Undergraduate Honors Theses

This paper is a documentation of a submission to the First Annual ASTFE Nuclear Thermal Hydraulics Computational Fluid Dynamics (CFD) Competition [1]. To validate simulations of turbulent mixing in buoyancy-driven flows, an air and argon test case was set up inside the University of Michigan’s MiGaDome mixing vessel. This submission to the competition used a polyhedral mesh of about two and a half hundred thousand cells, a Large Eddy Simulation (LES) of the MiGaDome, and the Wall-Adapting Local Eddy-viscosity (WALE) subgrid approximation model. The competition included a factor considering the energy cost of our simulations, so it was decided to …

Experimental And Numerical Investigation Of Air-Cooled Heat Sinks, Ethan Weems

Mechanical Engineering Undergraduate Honors Theses

Lightweight and affordable cooling capabilities are critical as the physical scale of electronics continues to decrease. Air-cooled heat sinks that dissipate heat from electronic components to the surrounding air are excellent candidates to fill this role. While plate-fin and pin-fin heat sinks have been implemented extensively for electronic cooling, recent advances in additive manufacturing enable the fabrication of more complex structures. In this undergraduate Honors thesis, a means by which to generate novel heat sink geometries is presented. To that end, an experimental characterization facility is developed to evaluate existing traditional heat sinks. The heat transfer performance of the heat …

Comparative Analysis Of Command Protocols For Cubesat Data Handling Systems, Roman Dowling

Mechanical Engineering Undergraduate Honors Theses

Researchers at the University of Arkansas developed ARKSAT-1, a cubic satellite with the purpose of employing an LED with a tracking system to perform spectroscopic measurements of the atmosphere.

The control board of the satellite contained several microcontrollers which worked in concert to collect and manage data. Discussed in this report are the software programs developed for the microcontrollers, dual Arduino MKRZeros, utilized as data repositories and for control of satellite peripherals. The programs discussed in this project include an original existing command-response protocol and an improved batch-command protocol, each with its accompanying data handling and storage system. These programs …