Mechanical Engineering Commons^™

Rotating Test Apparatus, Brian David Yale, David George Shelton

Mechanical Engineering

No abstract provided.

Local Vibrational Modes Competitions In Mn-Doped Zno Epitaxial Films With Tunable Ferromagnetism, Qiang Cao, Maoxiang Fu, Guolei Liu, Huaijin Zhang, Shishen Yan, Yanxue Chen, Liangmo Mei, Jun Jiao

Mechanical and Materials Engineering Faculty Publications and Presentations

We reported spectroscopic investigations of high quality Mn-doped ZnO (ZnMnO) films grown by oxygen plasma-assisted molecular beam epitaxy. Raman scattering spectra revealed two local vibrational modes (LVMs) associated with Mn dopants at 523 and 712cm^-1. The LVMs and magnetic properties of ZnMnO films can be synchronously modulated by post annealing processing or by introducing tiny Co. The relative intensity of two LVMs clearly shows competitions arising from uncompensated acceptor and donor defects competition for ferromagnetic and nonmagnetic films. The experimental results indicated that LVM at 523 cm^-1 is attributed to Mn—(Zinc-vacancy) complexes, while LVM at 712 cm …

Automatic Evaluation Of Multidisciplinary Derivatives Using A Graph-Based Problem Formulation In Openmdao, Justin Gray, Tristan Hearn, Kenneth Moore, John Hwang, Joaquim Martins, Andrew Ning

Faculty Publications

The optimization of multidisciplinary systems with respect to large numbers of design variables is best pursued using a gradient-based optimization together with a method that efficiently evaluates coupled derivatives, such as the coupled adjoint method. However, implementing such a method in a problem with more than a few disciplines is time consuming and error prone. To address this issue, we develop an automated procedure for assembling and solving the coupled derivative equations that takes into account the disciplinary couplings using the interdisciplinary dependency graph of the problem. The coupled derivatives can be computed completely analytically, if analytic derivatives are available …

Wake Interaction And Power Production Of Variable Height Model Wind Farms, M. H. Vested, N. Hamilton, J. N. Sørensen, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Understanding wake dynamics is an ongoing research topic in wind energy, since wakes have considerable effects on the power production when wind turbines are placed in a wind farm. Wind tunnel experiments have been conducted to study the wake to wake interaction in a model wind farm in tandem with measurements of the extracted power. The aim is to investigate how alternating mast height influences the interaction of the wakes and the power production. Via the use of stereo-particle image velocimetry, the flow field was obtained in the first and last rows of the wind turbine array as a basis …

Pbs Quantum Dot-Based Hetrojunction Solar Cells, Sawsan Khader Dagher

Dissertations

This study investigates the influence of nanoparticles (NPs) size on their optical properties, and the effect of combination of lead sulfide (PbS) quantum dots (QDs), with n-type and p-type NPs, on the photogenerated charge carriers transport across the heterojunction solar cell structure. PbS QDs, of a range of sizes, were synthesized using a co-precipitation process. In this study, p-type NPs, which are poly [3,4-ethylenedioxythiophene] –poly [styrenesulfonate] (PEDOT: PSS), copper oxide (CuO) and graphene oxide (GO); and n-type NPs which are zinc oxide (ZnO), titanium dioxide (TiO2), cadmium sulfide (CdS) and bismuth sulfide (Bi2S3), were synthesized and characterized by SEM and …

Dynamics Of 1d Granular Column, Luo Zuo

Dissertations

This dissertation is focused on a discrete element study of the dynamics of a one- dimensional column of inelastic spheres that it subjected to taps by prescribing a half sine wave pulse to supporting floor. Contact interactions obey the Walton-Braun soft-sphere model in which the loading (unloading) path is governing by linear springs of stiffness K1, thereby producing col lisional energy loss through a constant restitution coefficient e. Over a ‘short time scale’, computations are done to examine the floor pulse wave as it propagates through the column contact network. Comparisons of the simulated findings are made with experimental measurements …

Gas-Solid Transport And Reaction Via Intervened Evaporating Sprays, Pengfei He

Dissertations

Fluid catalytic cracking (FCC) is a major process used for converting heavy oils to transportation fuels and light olefins. The gas-solid transport with reaction via intervened evaporating sprays in the FCC riser is specially important but complicated, with coupled mechanisms of chemical reaction and heat, momentum and mass transfer among multiple phases (liquid, solid and gas) in the restriction of wall boundary. Recent developments in FCC process models have progressed along two lines. One aims to develop composition-based kinetic models derived from molecular characterization of petroleum fractions while overlooking the hydrodynamic effect on local catalyst to oil ratio (CTO). The …

Probing The Roles Of Polymeric Separators In Lithium-Ion Battery Capacity Fade At Elevated Temperatures, Jianchao Chen, Yongda Yan, Tao Sun, Yue Qi, Xiaodong Li

Faculty Publications

The high temperature mechanical property of separators is very important for safety of lithium-ion batteries. However, the mechanical integrity of polymeric separators in lithium-ion batteries at elevated temperatures is still not well characterized. In this paper, the temperature dependent micro-scale morphology change of PP (polypropylene)-PE (polyethylene)-PP sandwiched separators (Celgard 2325) was studied by in-situ high temperature surface imaging using an atomic force microscope (AFM) coupled with power spectral density (PSD) analysis and digital image correlation (DIC) technique. Both PSD and DIC analysis results show that the PP phase significantly closes its pores by means of dilation of the nanofibrils surrounding …

Fate Of Sessile Droplet Chemical Agents In Environmental Substrates In The Presence Of Physiochemical Processes, Homayun K. Navaz, A. L. Dang, Theresa Atkinson, Ali Zand, A. Nowakowski, K. Kamensky

Mechanical Engineering Presentations And Conference Materials

A general-purpose multi-phase and multi-component computer model capable of solving the complex problems encountered in the agent substrate interaction is developed. The model solves the transient and time-accurate mass and momentum governing equations in a three dimensional space. The provisions for considering all the inter-phase activities (solidification, evaporation, condensation, etc.) are included in the model. The chemical reactions among all phases are allowed and the products of the existing chemical reactions in all three phases are possible. The impact of chemical reaction products on the transport properties in porous media such as porosity, capillary pressure, and permeability is considered. Numerous …

Aerodynamic Improvements For Auto-Carrying Railcars, Robert Arthur Condie

Theses and Dissertations

The railroad industry is responsible for the mass transport of a vast numbers of goods throughout the United States. As needs and capabilities of the railroad industry have changed, the interest in reducing the resistance of locomotives and railcars has increased. This has become paramount as fuel prices have increased in recent years. Resistant forces can result from friction in mechanical components and aerodynamic drag of the moving train. As the average traveling speeds of trains have increased, aerodynamics are contributing a larger fraction of the overall resistance. For this reason, the aerodynamic profiles of trains have become a topic …

Flexible Residential Test Facility: Impact Of Infiltration And Ventilation On Measured Cooling Season Energy And Moisture Levels, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC has conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

Environmental Stimulation Chamber For Nanosatellite Functional Testing, Taylor Donato, Nicholas Page, Joshua Summers, Brandon Wood

Mechanical Engineering Senior Theses

The goal of this project is to develop a nanosatellite thermal testing chamber for the Robotic Systems Laboratory at Santa Clara University. The nanosatellite industry has thrived in recent years and continues to grow at the level of universities and small businesses. To meet this demand, the team designed and built a testing bed capable of achieving environmental conditions adequate for testing nanosatellite hardware as a low-cost and low-maintenance alternative to more expensive and robust systems. Furthermore, the design can be fully manufactured and assembled at the university or small business level with inexpensive, sustainable, and commercially available components. The …

Microstructure Design And Experimental Characterization Of Functional Elastic Metamaterials, Rui Zhu

Theses and Dissertations

Elastic metamaterials are of growing interest due to their dramatically increased manipulation ability as well as their novel engineering applications. The purpose of this research is to develop and model elastic metamaterials with unusual effective properties and their applications in low frequency elastic wave attenuation and vibration suppression. The working principle of the elastic metamaterials is to use man-made microstructures, local resonators, on a scale much less than its working wavelength. Therefore it is possible to describe their response by using dispersive homogenized effective media. First, we developed a retrieval method to obtain effective material properties of the metamaterial and …

Fluid Flow-Induced Mesenchymal Stem Cell Migration: Role Of Fak And Rock Mechanosensors, Brandon D. Riehl

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The study of mesenchymal stem cell (MSC) migration under mechanical stimulation conditions with investigation of the underlying molecular mechanism could lead to a better understanding and outcomes in stem cell-based regenerative medicine. MSCs having multipotent regenerative capability exist in niches in the bone marrow, muscle, vasculature, and in other tissues throughout the body, and their migration through tissues and vasculature for the repair of damaged tissue is a key process of cell and tissue homeostasis, remodeling, and regeneration. While cell migration in response to cytokines and other chemo-attractants is relatively well understood, little is revealed in regard to the effect …

Reducing Vortex-Induced Vibration Of Drilling Risers With Marine Fairing, Aswin Janardhanan

LSU New Orleans Theses and Dissertations

Since the offshore drilling for oil and gas is venturing into ever greater water depths, drilling risers face problems of vortex-induced vibrations due to the currents. Vortexinduced vibrations are a major fluid load and fatigue component on the long, smooth, and slender bodies placed in a fluid flow and measures must be taken to suppress the shedding of the Karman vortex sheets from its edges. One of the ways to reduce the vibration is to use marine fairings which are attached to the drilling risers with the help of weather vanes. In this thesis, CFD analysis based on solving RANS …

Adding Vision To A Quadrotor: A Design-Build-Test Adventure, Darren Tinker

Mahurin Honors College Capstone Experience/Thesis Projects

Quadrotors are small and exceptionally agile vehicles with maneuverability that permits both indoor and outdoor flight. The vast majority of quadrotors are flown autonomously as drones or remotely by a human-operator. Applications of quadrotors range from commercial deliveries, to military and law reconnaissance as well as research tools for various fields. Our lab at Western Kentucky University built a quadrotor in 2013, and we have been exploring various modifications to refine its performance and various applications in which it could be productively employed. Recently, research has focused on the addition of a camera to add capabilities for first person view …

An Approach To Thermocouple Temperature Measurements That Reduces Uncertainties Associated With Radiative Corrections, Siddharth Krishnan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Obtaining accurate temperature measurements in flame environments with thermocouples is extremely challenging due to the effects of radiative heat loss. These losses are difficult to quantify and often cannot be corrected for or minimized without sacrificing spatial resolution. In this work, a new experimental methodology is presented that has shown potential to minimize the temperature correction by both increasing and controlling the effects of convection. This is accomplished through high speed rotation of the thermocouple. The rotation yields a high and known convective velocity over the thermocouple. Heat transfer can then be modeled for the thermocouple, and a functional relationship …

Engineered Plasmonic Nanostructures For Nanomedicine, Christopher Matthew Portz

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

Numerical Simulation And Optimization Of Carbon Dioxide Utilization And Storage In Enhanced Gas Recovery And Enhanced Geothermal Systems, James H. Biagi

McKelvey School of Engineering Graduate Student Theses & Dissertations

With rising concerns surrounding CO₂ emissions from fossil fuel power plants, there has been a strong emphasis on the development of safe and economical Carbon Capture Utilization and Storage (CCUS) technology. Two methods that show the most promise are Enhanced Gas Recovery (EGR) and Enhanced Geothermal Systems (EGS). In Enhanced Gas Recovery a depleted or depleting natural gas reservoir is re-energized with high pressure CO₂ to increase the recovery factor of the gas. As an additional benefit following the extraction of natural gas, the reservoir would serve as a long-term storage vessel for the captured carbon. CO_{2 …}

A Novel Intermediate-Temperature All Ceramic Iron–Air Redox Battery: The Effect Of Current Density And Cycle Duration, Xuan Zhao, Xue Li, Yunhui Gong, Nansheng Xu, Kevin Huang

Faculty Publications

We here report the energy storage characteristics of a new all ceramic iron–air redox battery comprising of a reversible solid oxide fuel cell as the charger/discharger and a Fe–FeO_x redox couple as the chemical storage bed. The effects of current density and cycle duration on specific energy and round trip efficiency of the new battery have been systematically studied at 650°C and 550°C. The results explicitly show that current density is the most influential variable on the performance, signifying the importance of improving electrochemical performance of the reversible solid oxide fuel cell.

Handloaded Rifle Ammunition: A Look Into The Assembly Process, Load Development Methods, And Its Comparison To Factory Ammunition, Jeffrey Dalton Snyder

Senior Theses

The purpose of this thesis is to educate the reader on the appeal of assembling firearm ammunition from its individual components, a process known as “handloading,” in comparison to factory assembled ammunition. This is accomplished by providing the reader with the benefits of handloading with an overview of the handloading process. Then, an example of a handload development method (Ladder Test) is discussed and performed. The results from the test are then analyzed and explained. Finally, the handloaded ammunition from the test is compared by function and price to factory ammunition from three different market segments.

The project portion of …

College Of Engineering Senior Design Competition Spring 2014, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Characterization Of 3d Interconnected Microstructural Network In Mixed Ionic And Electronic Conducting Ceramic Composites, William M. Harris, Kyle S. Brinkman, Ye Lin, Dong Su, Alex P. Cocco, Arata Nakajo, Matthew B. Degostin, Yu-Chen Karen Chen-Wiegart, Jun Wang, Fanglin Chen, Yong S. Chu, Wilson K. S. Chiu

Faculty Publications

The microstructure and connectivity of the ionic and electronic conductive phases in composite ceramic membranes are directly related to device performance. Transmission electron microscopy (TEM) including chemical mapping combined with X-ray nanotomography (XNT) have been used to characterize the composition and 3-D microstructure of a MIEC composite model system consisting of a Ce_0.8Gd_0.2O₂ (GDC) oxygen ion conductive phase and a CoFe₂O₄ (CFO) electronic conductive phase. The microstructural data is discussed, including the composition and distribution of an emergent phase which takes the form of isolated and distinct regions. Performance implications are considered …

Piezoresistive Sensing Of Bistable Micro Mechanism State, Jeffrey K. Anderson, Larry L. Howell, Jonathan W. Wittwer, Timothy W. Mclain

Faculty Publications

The objective of this work is to demonstrate the feasibility of on-chip sensing of bistable mechanism state using the piezoresistive properties of polysilicon, thus eliminating the need for electrical contacts. Changes in position are detected by observing changes in resistance across the mechanism. Sensing the state of bistable mechanisms is critical for various applications, including high-acceleration sensing arrays and alternative forms of nonvolatile memory. A fully compliant bistable micro mechanism was designed, fabricated, and tested to demonstrate the feasibility of this sensing technique. Testing results from two fabrication processes, SUMMiT IV and MUMPs, are presented. The SUMMiT mechanism was then …

Bi-Directional Variable Stiffness Magnetorheological Elastomer (Mre) Design, Sarah S. Trabia

College of Engineering: Graduate Celebration Programs

What is MRE?
•MRE is a semi-active silicon with embedded iron particles for variable stiffness changes under external magnetic flux

Research Objective
•Feasibility of using MRE as a haptic feedback device.
•Design a MRE device that can increase or decrease the stiffness.
•Design an effective way of providing a “pre-strain” to the base silicon material.

Computational Simulation
•COMSOL 4.3b Finite Element Analysis
•2D axisymmetric model
•Parametric sweep was run to find the amount of current needed to counteract the permanent magnet.

Investigation Of Phase Change In A36 Steel As A Result Of High Velocity Impact Loading, Mena Slewa

College of Engineering: Graduate Celebration Programs

High velocity projectiles cause severe damage to target materials upon impact. The target material is subject to high pressure and temperature over a very short period of time. This work studies the effects of Lexan projectiles impacting A36 steel at velocities between 3 km/sec and 6 km/sec. The damage zone develops in the target within 5 microseconds. Some steel materials go through a reversible phase change when subject to elevated temperature and high quasi-static pressure. It is unknown whether A36 steel experiences this phase change during high velocity impact. The objective of this work is to investigate if any permanent …

Computational Feasibility Study Of Dual Photon/Neutron Imaging Technique, Jessica Hartman, Alexander Barzilov

College of Engineering: Graduate Celebration Programs

• Non-destructive testing (NDT) is crucial for industrial applications, particularly when imaging of internal components or structures is desired

• Current NDT imaging techniques, such as x-rays, focus primarily on isolating unique shapes. Rarely are these methods capable of distinguishing materials or material composition

• Potential application in the car industry for testing and examining the functional durability of products
  − Vehicle engines are composed of a combination of low-z and high-z materials with significant variation in density
  − Being able to determine the location of material during operation eliminates the need to disassemble an engine during study

Design And Experimental Testing Of Nanoinjection Protocols For Delivering Molecules Into Hela Cells With A Bio-Mems Device, Zachary Kendall Lindstrom

Theses and Dissertations

Delivering foreign molecules into living cells is a broad and ongoing area of research. Gene therapy, or delivering nucleic acids into cells via non-viral or viral pathways, is an especially promising area for pharmaceutics. All gene therapy methods have their respective advantages and disadvantages, including limited delivery efficiency and low viability. Nanoinjection, or delivering molecules into cells using a solid lance, has proven to be highly efficient while maintaining high viability levels. In this thesis, an array of solid silicon lances was tested by nanoinjecting tens of thousands of HeLa cancer cells simultaneously. Several molecule types were injected in different …

Fixed Platform Crane For Equipment Access, Carlos Gonzalez, Steven Hollander, Yue Zhao, Jared Pellegrin, Travis Odom

Honors Capstones

No abstract provided.

Assortment Planning Of Automotive Products: Considerations For Economic And Environmental Impacts Of Technology Selection, Ali Taghavi, Ratna Babu Chinnam

Industrial and Systems Engineering Faculty Research Publications

A manufacturer’s assortment is the set of products that the company offers to its customers. Assortment planning considerably affects both the sales revenue and product offering costs for the company and it had experienced growing attention across different industries over recent decades. In this study, we propose a modeling framework that seeks to identify the optimal assortment for a manufacturer of configurable products (in particular, automobiles). Our model accounts for environmental considerations (Corporate Average Fuel Economy requirements, tail-pipe emissions, and greenhouse gas emissions related to the production of the fuel used to power the vehicle) during assortment planning. We formulate …