Mechanical Engineering Commons^™

Test 2113: John Deere 7310r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2111: John Deere 9520r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2110: John Deere 9470rt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2108: John Deere 9420r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2106: John Deere 6215r Autoquad-Plus, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2133: John Deere 9570r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2129: John Deere 8320rt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2126: Case Ih Magnum 380, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2123a: New Holland T8.350, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2125: New Holland T8.410, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2136: John Deere 6175r Autoquad-Plus, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2124: Case Ih Magnum 310, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2120: Case Ih Magnum 220, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Investigation Of Robust Optimization And Evidence Theory With Stochastic Expansions For Aerospace Applications Under Mixed Uncertainty, Harsheel R. Shah

Doctoral Dissertations

One of the primary objectives of this research is to develop a method to model and propagate mixed (aleatory and epistemic) uncertainty in aerospace simulations using DSTE. In order to avoid excessive computational cost associated with large scale applications and the evaluation of Dempster Shafer structures, stochastic expansions are implemented for efficient UQ. The mixed UQ with DSTE approach was demonstrated on an analytical example and high fidelity computational fluid dynamics (CFD) study of transonic flow over a RAE 2822 airfoil.

Another objective is to devise a DSTE based performance assessment framework through the use of quantification of margins and …

Ink-Jet Printing: A Method For Affordable Additive Manufacturing Of Dye-Sensitized Solar Cells, Ryan Longchamps

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

A Distributed Surrogate Methodology For Inverse Most Probable Point Searches In Reliability Based Design Optimization, James Davidson

Browse all Theses and Dissertations

Surrogate models are commonly used in place of prohibitively expensive computational models to drive iterative procedures necessary for engineering design and analysis such as global optimization. Additionally, surrogate modeling has been applied to reliability based design optimization which constrains designs to those which provide a satisfactory reliability against failure considering system parameter uncertainties. Through surrogate modeling the analysis time is significantly reduced when the total number of evaluated samples upon which the final model is built is less than the number which would have otherwise been required using the expensive model directly with the analysis algorithm. Too few samples will …

High Temperature Transient Creep Analysis Of Metals, Sara Mirmasoudi

Browse all Theses and Dissertations

The ability to design vehicles capable of reaching hypersonic speeds has become a necessity to satisfy industry requirements, hence requiring the need for better understanding of creep behavior of materials. Although the steady state creep of metals has been analyzed rigorously, there is little known about transient creep of many metals. Understanding transient creep behavior of metals is crucial in analysis and design of short term hypersonic flight applications. Hence, a transient creep analysis of 304SS, Al7075-T6, Al2024-T6, Inconel 625, Inconel 718, and Rene N4 is carried out focusing on the microstructural behavior of these metals undergoing high temperature operating …

Development Of A Hydraulic Component Leakage Detecting System Using Pressure Decay Signal, Xuanju Shang

Dissertations and Theses @ UNI

It is preferable to detect leakage at the earliest phase in the manufacturing process, and then further assembly of hydraulic components with leakage problems can be avoided. Integrating a USB based microcontroller and a pressure sensor; this study developed a hydraulic leakage detection system in using air instead of hydraulic oil as medium, through measuring pressure decay signals captured by a real time data acquisition system. Compared with the conventional hydraulic system using oils, this system shows advantages in safety operation and little environmental concerns due to use a lower pressure clean air.

The low-cost hydraulic leakage detection system was …

An Axisymmetric Finite Element Model To Study The Earplug Contribution To The Bone Conduction Occlusion Effect, Martin K. Brummund, Franck Sgard, Yvan Petit, Frédéric Laville, Hugues Nélisse

Études primaires

An axisymmetric linear elasto-acoustic finite element (FE) model of an occluded human external ear is proposed to simulate the bone conduction occlusion effect (OE). The model consists of a cylindrical ear canal cavity surrounded by layers of biological tissues (skin, cartilage and bone) in which an earplug is inserted. Geometrical and material properties are taken from the literature. OEs are predicted for foam and silicone earplug FE-models using COMSOL Multiphysics (COMSOL®, Sweden). The FE-model is shown to predict the experimental OE measured in two healthy human reference groups wearing foam or silicone earplugs, satisfactorily. Deviations between model and experiment are …

Evaporative Techniques For Stormwater Runoff Alleviation, Allison M. Arnold

Graduate Theses, Dissertations, and Problem Reports (ETD)

Current climate changes have led to a projected steady increase in rainfall over the next several decades, notably in the Greater Pittsburgh Area. Even without this predicted increase the urbanization of many regions has altered local natural environments, which in the past stored, shed and evaporated this runoff water effectively, maintaining balance within the water table. These added rainfall forecasts, combined with America’s growing trend to develop and expand the urbanization of our natural earth, has resulted in a growing surplus of stormwater runoff water affecting these cities and their suburbs, leaving many sanitation departments unable to meet the heightened …

Surface Treatments To Tailor The Wettability Of Carbon Nanotube Arrays, Lvmeng He

Browse all Theses and Dissertations

Carbon nanotubes (CNTs) have gained great attention due to their excellent mechanical, electrical, and thermal properties. Carbon nanotube (CNT) arrays attached to solid substrates resemble a nano-carpet and have potentials in a variety of devices. In this study, the focus is to investigate the surface modification approaches of CNT carpets on flat (compressed) graphite. Wettability, or permeation of a liquid such as water into the CNT strands, may play very significant roles in many applications where a CNT-coated device may be used in aqueous environment. Short-term microwave plasma treatments were used in this project to functionalize CNT carpets for wettability. …

Electron-Hole Diffusion Lengths >175 Μm In Solution-Grown Ch3Nh3Pbi3 Single Crystals, Qingfeng Dong, Yanjun Fang, Yuchuan Shao, Padhraic Mulligan, Jie Qiu, Lei Cao, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

Long, balanced electron and hole diffusion lengths greater than 100 nanometers in polycrystalline CH₃NH₃PbI₃ are critical for highly efficient perovskite solar cells. We report that the diffusion lengths in CH₃NH₃PbI₃ single crystals grown by a solution-growth method can exceed 175 μm under 1 sun illumination and exceed 3 mm under weak light for both electrons and holes. The internal quantum efficiencies approach 100% in 3 mm-thick single crystal perovskite solar cells under weak light. These long diffusion lengths result from greater carrier mobility, lifetime and dramatically smaller trap densities in …

Multiscale Modeling Of Skeletal Muscle Active Contraction In Relation To Mechanochemical Coupling Of Molecular Motors, Jiangcheng Chen, Xiaodong Zhang, Shengmao Lin, He Wang, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

In this work, a mathematical model was developed to relate the mechanochemical characterizations of molecular motors with the macroscopic manifestation of muscle contraction. Non-equilibrium statistical mechanics were used to study the collective behavior of myosin molecular motors in terms of the complex conformation change and multiple chemical states in one working cycle. The stochastic evolution of molecular motor probability density distribution during the contraction of sarcomere was characterized by the Fokker-Planck Equation. Quick muscle contraction was demonstrated by the collective dynamic behavior of myosin motors, the muscle contraction force, and the muscle contraction velocity-force relation. Our results are validated against …

Generation And Delivery Of Charged Aerosols To Infant Airways, Landon T. Holbrook

Theses and Dissertations

The administration of pharmaceutical aerosols to infants on mechanical ventilation needs to be improved by increasing the efficiency of delivery devices and creating better ways of evaluating potential therapies. Aerosolized medicines such as surfactants have been administered to ventilated infants with mixed results, but studies have shown improvement in respiratory function with a much lower dose than with liquid instillation through an endotracheal tube (ETT). An aerosolized medicine must be transported through the ventilation tubing and deposit in the lungs to have the desired therapeutic response.

This work has taken a systematic approach to (i) develop new devices for the …

Micro- And Macro-Scale Modeling Of Filter Aging: Effects Of Particle Poly-Dispersity And Fiber Cross-Sectional Shape, Ahmed M. Saleh

Theses and Dissertations

The goal of this study is to further advance the state of the art in developing self-sufficient methods to predict the performance of an aerosol filter. The simulation methods developed in this study are based on first principles and consequently, they do not rely on empirical correction factors. These simulation methods can be used to predict the instantaneous collection efficiency and pressure drop of a filter under dust-loading conditions. In the current study, 3-D micro- and macroscale CFD models are developed to simulate the service life of flat-sheet and pleated filters. These CFD micro- and macroscale models are also used …

The Simulation & Evaluation Of Surge Hazard Using A Response Surface Method In The New York Bight, Michael H. Bredesen

UNF Graduate Theses and Dissertations

Atmospheric features, such as tropical cyclones, act as a driving mechanism for many of the major hazards affecting coastal areas around the world. Accurate and efficient quantification of tropical cyclone surge hazard is essential to the development of resilient coastal communities, particularly given continued sea level trend concerns. Recent major tropical cyclones that have impacted the northeastern portion of the United States have resulted in devastating flooding in New York City, the most densely populated city in the US. As a part of national effort to re-evaluate coastal inundation hazards, the Federal Emergency Management Agency used the Joint Probability Method …

Networked Heterogeneous Systems In A Ros-Enabled Cloud Environment, Christopher Reid

College of Graduate Studies: Theses & Dissertations

It is important in the development of cloud robotics that the challenges presented by transferring computational loads to networked resources are properly addressed. The challenges include network latency, data integrity, security, and privacy. The objective of the present work is to investigate the issues of latency and data integrity in a representative cloud robotics environment. The present work involves setting up a cloud robotics network in an open-source Robot Operating System (ROS) framework and carrying out investigations on the levels of latency and reduction in data integrity as utilization of the network increases. In this study, a virtual datacenter has …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

College of Graduate Studies: Theses & Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

Computational Fluid Dynamics Modeling Of The Effects Of Water Injection In A Diesel Engine, Rabun Z. Wallace

College of Graduate Studies: Theses & Dissertations

Water injection has been used in internal combustion engines for many years. It has been used to cool combustion temperatures, reduce emissions, and in some instances clean carbon buildup from the cylinder. Research has shown that the water to fuel mass ratio is most effective between 20-30%, so the upper and lower limit were used for simulations in Converge CFD. To validate the CFD model, a case without water injection was compared to experimental data from Sandia National Laboratory. The predicted in-cylinder pressure and heat release rate showed good agreement with the experimental data. Cases were run with the injection …

Enhanced Pool-Boiling Heat Transfer And Critical Heat Flux On Femtosecond Laser Processed Stainless Steel Surfaces, Cory M. Kruse, Troy Anderson, Chris Wilson, Craig Zuhlke, Dennis Alexander, George Gogos, Sidy Ndao

Department of Mechanical and Materials Engineering: Faculty Publications

In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux …