Mechanical Engineering Commons^™

Well-Posedness And Convergence Of Cfd Two-Fluid Model For Bubbly Flows, Avinash Vaidheeswaran

Open Access Dissertations

The current research is focused on developing a well-posed multidimensional CFD two-fluid model (TFM) for bubbly flows. Two-phase flows exhibit a wide range of local flow instabilities such as Kelvin-Helmholtz, Rayleigh-Taylor, plume and jet instabilities. They arise due to the density difference and/or the relative velocity between the two phases. A physically correct TFM is essential to model these instabilities. However, this is not the case with the TFMs in numerical codes, which can be shown to have complex eigenvalues due to incompleteness and hence are ill-posed as initial value problems. A common approach to regularize an incomplete TFM is …

A Three Constituent Mixture Theory Model Of Cutaneous And Subcutaneous Tissue In The Context Of Neonatal Pressure Ulcer Etiology And Prevention, Anne Dye Zakrajsek

Open Access Dissertations

Localized ischemia, impaired interstitial fluid flow, and sustained mechanical loading of cells have all been hypothesized as mechanisms of pressure ulcer (PrU) etiology. Time-varying loading has experimentally been shown to increase fluid flow in human skin in vivo. Towards the design of prophylactic protocols and treatment modalities for PrU management there is a need for an analytical model to investigate the local fluid flow characteristics of skin tissue under time-varying loading. In this study, a triphasic mixture theory model with constituents of extracellular matrix, interstitial fluid, and blood was calibrated and validated and used to investigate stress and fluid velocity …

Modeling Person-To-Person Contaminant Transport In Enclosed Environments, Chun Chen

Open Access Dissertations

It is essential to predict person-to-person contaminant transport in enclosed environments to improve air distribution design and reduce the infection risk from airborne infectious diseases. This study aims to improve and accelerate the simulation of person-to-person contaminant transport in enclosed environments. ^ This investigation first conducted experimental measurements of person-to-person contaminant transport in an office mockup and the first-class cabin of a functional MD-82 aircraft. The experimental data of steady-state airflow, temperature, and gas contaminant concentration fields obtained in the office were used to validate the steady-state computational fluid dynamics (CFD) models. In the aircraft cabin, the transient particle concentrations …

Multi-Segment Foot Joint Kinematics With Varying Midfoot Orthotic Postings, Hilary F. Feskanin

Honors Theses

Foot orthoses are often prescribed to prevent and treat lower limb disorders. While the success of these devices is well documented, the mechanisms behind them are unclear. Due to methodological limitations, many studies have focused on the rearfoot. This is the first study to assess the effects of midfoot-targeted orthotic strategies on midfoot and rearfoot kinematics. Gait mechanics were recorded for 19 healthy females walking in four orthotic conditions: valgus midfoot post, varus midfoot post, heel lift and standard/control. The midtarsal and ankle joint 3D kinematics for the three experimental conditions were compared to the control condition. Variables of interest …

School-Books On Tape: The Tensile And Adhesive Strength Of Duct Tape In A College Backpack, Robin Elizabeth Ker

Honors Theses

Two categories were used to assess the strength of duct tape constructions: adhesive strength and tensile strength. Previously made duct tape backpacks frequently suffered from adhesive failure around shoulder straps. When a backpack is lifted, it experiences a force which is greater than the resting weight. The hypothesis states that there is an area of application between two pieces of duct tape such that they will behave as a uniform piece and experience tensile failure, that two sufficiently overlapped pieces can hold within 5% of the load carried by a single piece, and that there is a relationship between the …

Transient Cardiovascular Hemodynamics In A Patient-Specific Arterial System, Jr Rodward Hewlin

Dissertations

The ultimate goal of the present study is to aid in the development of tools to assist in the treatment of cardiovascular disease. Gaining an understanding of hemodynamic parameters for medical implants allow clinicians to have some patient-specific proposals for intervention planning. In the present study a full cardiovascular experimental phantom and digital phantom (CFD model) was fabricated to study: (1) the effects of local hemodynamics on global hemodynamics, (2) the effects of transition from bed-rest to upright position, and (3) transport of dye (drug delivery) in the arterial system. Computational three dimensional (3-D) models (designs A, B, and C) …

2015 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2015.

Group Decisions In Value Management, Christiono Utomo, Farida Murti, Arazi Idrus

Makara Journal of Technology

This research deals with a technique to expedite group decision making during the selection of technical solutions for value management process. Selection of a solution from a set of alternatives is facilitated by evaluating using multicriteria decision making techniques. During the process, every possible solution is rated on criteria of function and cost. Function deals more with quality than with quantity, and cost can be calculated based on the theoretical time value of money. Decision-making techniques based on satisfying games are applied to determine the relative function and cost of solutions and hence their relative value. The functions were determined …

A Mechanical Regenerative Brake And Launch Assist Using An Open Differential And Elastic Energy Storage, David H. Myszka, Andrew P. Murray, Kevin Giaier, Vijay Krishna Jayaprakash, Christoph Gillum

Mechanical and Aerospace Engineering Faculty Publications

Regenerative brake and launch assist (RBLA) systems are used to capture kinetic energy while a vehicle decelerates and subsequently use that stored energy to assist propulsion. Commercially available hybrid vehicles use generators, batteries and motors to electrically implement RBLA systems. Substantial increases in vehicle efficiency have been widely cited.

This paper presents the development of a mechanical RBLA that stores energy in an elastic medium. An open differential is coupled with a variable transmission to store and release energy to an axle that principally rotates in a single direction. The concept applies regenerative braking technology to conventional automobiles equipped with …

Victair Mistifier Gearbox: Shafts And Bearings, Rickey Skinner, Gabe Bruno, Casey Mcfarlen

Mechanical Engineering and Technology Senior Projects

The current global population is 7.2 billion. It is projected to increase by 1 billion over the next 12 years. There is only 5% of usable farming land left on earth. Food is a resource that humans must consume daily. These facts undeniably lead to a shortage of food in the future. It is essential to mankind survival that farming becomes more efficient and sustainable. This provided the motivation to design a more efficient transmission for the Victair Mistifier (orchard and vineyard sprayer). Victair Mistifiers are designed, engineered, and manufactured by H.F. Hauff Company in Yakima, WA. The Hauff Company’s …

Mechatronics Design Process With Energy Optimization For Industrial Machines, Aderiano Medeiros Da Silva

Dissertations (1934 -)

The need for designing industrial machines with higher energy efficiency, reliability, flexibility, and accuracy has increased to satisfy market demand for higher productivity at reduced costs in a sustainable manner. As machines become more complex, model-based design is essential to overcome the challenges in mechatronic system design. However, a well-designed mechanical system with a well-designed and tuned control system are not sufficient for machines to operate at high-performance conditions; this also heavily depends on trajectory planning and the appropriate selection of the motors controlling the axes of the machine. In this work, a model-based design approach to properly select motors …

Dynamic Modeling Of Human Gait Using A Model Predictive Control Approach, Jinming Sun

Dissertations (1934 -)

This dissertation aims to develop a dynamic model of human gait, especially the working principle of the central nervous system (CNS), using a novel predictive approach. Based on daily experience, it should be straightforward to understand the CNS controls human gait based on predictive control. However, a thorough human gait model using the predictive approach have not yet been explored. This dissertation aims to fill this gap. The development of such a predictive model can assist the developing of lower limb prostheses and orthoses which typically follows a trial and error approach. With the development of the predictive model, lower …

Fiber Optic Ring Resonator Sensor Detection Technique Based On Spectral Intensity Integration, Purnomo Sidi Priambodo, Sasono Rahardjo, Gunawan Witjaksono, Djoko Hartanto

Makara Journal of Technology

Resonant field phenomenon in optical ring resonator has been a major theme for various studies and can be used for various sensor applications. The spectral response shape changes are subjects to be discussed and analyzed for detection in optical sensor system. The spectral response changes are caused by various factors ranging from refractive index of the surrounding medium, medium loss due to absorption and scattering, and coupling variation between waveguides. These optical phenomena are mostly used for bio-sensor applications, since it is free from electromagnetic interference (EMI) and non-physically destructive. In this paper, we discuss our current research in developing …

Seebeck Coefficient Of Soi Layer Induced By Phonon Transport, Faiz Salleh, Takuro Oda, Yuhei Suzuki, Yoshinari Kamakura, Hiroya Ikeda

Makara Journal of Technology

The Seebeck coefficient of a patterned Si wire on P-doped SOI (Si-on-insulator) layer with a carrier concentration of 1018 cm-3 was measured near room temperature. The Seebeck coefficient is found to be smaller than that in the SOI layer and to be closer to the calculated Seebeck coefficient including the electronic contribution. The decrease in the Seebeck coefficient of Si wire is likely to occur due to the elimination of the contribution of phonon drag part. From the theoretical calculation of scattering rates by considering the scattering processes in phonon system, it is considered that an increase in phonon-boundary scattering …

Design Of Timing Circuit For Fuel Injection Conversion And Development Of Laboratory To Analyze Engine Performance Using A Dynamometer, Aditi Jayram Limaye

Mechanical & Aerospace Engineering Theses & Dissertations

A fundamental facility was built to analyze some of the basic parameters involved in engine performance, namely torque and power output of the engine. One of the objectives was to convert a carbureted engine into a fuel injection or (Fl) engine. This was achieved by designing and creating a timing circuit that is required to trigger the electronic fuel injector or (EFI). The facility was designed around a dynamometer and a fuel delivery system; that provided a specialized tool to analyze engines and injectors.

The results from the carbureted experiments and the FI experiments were compared to the rated specifications …

Development Of Analytical Sensitivity Analysis For Ahp Applications, Marie L. Ivanco

Mechanical & Aerospace Engineering Theses & Dissertations

Decision makers often face complex problems, which can seldom be addressed without the use of structured analytical models. Mathematical models have been developed over the last 50 years to streamline and facilitate decision making activities. The Analytic Hierarchy Process constitutes one of the most utilized Multi-Criteria Decision Analysis Methods. While AHP has been thoroughly researched and applied, the method still shows limitations in terms of integrating profile disparities of Subject Matter Experts (SMEs). This thesis develops an analytical sensitivity analysis method for AHP based on local partial derivatives to address these limitations. Four examples are presented to demonstrate and validate …

A Hybrid Controller For Stability Robustness, Performance Robustness, And Disturbance Attenuation Of A Maglev System, Feng Tian

Dissertations (1934 -)

Devices using magnetic levitation (maglev) offer the potential for friction-free, high-speed, and high-precision operation. Applications include frictionless bearings, high-speed ground transportation systems, wafer distribution systems, high-precision positioning stages, and vibration isolation tables. Maglev systems rely on feedback controllers to maintain stable levitation. Designing such feedback controllers is challenging since mathematically the electromagnetic force is nonlinear and there is no local minimum point on the levitating force function. As a result, maglev systems are open-loop unstable. Additionally, maglev systems experience disturbances and system parameter variations (uncertainties) during operation. A successful controller design for maglev system guarantees stability during levitating despite system …

A Compliant Mechanism-Based Variable-Stiffness Joint, Jacob Marc Robinson

Theses and Dissertations

A review of current variable-stiffness actuators reveals a need for more simple, cost effective, and lightweight designs that can be easily incorporated into a variety of human-interactive robot platforms. This thesis considers the potential use of compliant mechanisms to improve the performance of variable-stiffness actuators. The advantages and disadvantages of various concepts using compliant mechanisms are outlined, along with ideas for further exploration. A new variable-stiffness actuator that uses a compliant flexure as the elastic element has been modeled, built, and tested. This new design involves a variable stiffness joint that makes use of a novel variable transmission. A prototype …

Isogeometric Analysis For Electromagnetism, Tahsin Khajah

Mechanical & Aerospace Engineering Theses & Dissertations

The combination of numerical analysis with the scanning technology has been seeing increased use in many research areas. There is an emerging need for high-fidelity geometric modeling and meshing for practical applications. The Isogeometric Analysis (IGA) is a comprehensive computational framework, which integrates geometric modeling and meshing with analysis. Different from other existing numerical methods, the IGA can generate analysis ready models without loss of geometrical accuracy. In IGA, the continuity and the quality of a solution can be conveniently controlled and refined. These features enable IGA to integrate modeling, analysis, and design in a unified framework, the root idea …

Electric Vehicle Sales For 2014 And Future Projections, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

The object of this research is to assess the current status and to predict the future penetration of electric vehicles (EVs) within the U.S. market. The prediction method is based on EV yearly sales giving the cumulative vehicles on the road for 2010 through 2014 and the growth rates for these five years. Using these growth values, the future ten year values are calculated. The EV sales results for 2014 in the U.S. show that 118,773 vehicles were sold as compared to 96,700 vehicles in 2013. This gives a one year sales growth rate of 23%. The total cumulative number …

Verification Of A Dual-State Extended Kalman Filter With Lidar-Enabled Autonomous Hazard-Detection For Planetary Landers, Peter Joseph Jorgensen

Master's Theses (2009 -)

This thesis presents a mathematical model for a LIDAR-enabled Terrain- and Hazard-Relative Navigation sensor and the design and implementation of a dual-state extended Kalman filter. The extended Kalman filter equations are presented in summary. Mathematical models for an altimeter, a velocimeter, a star tracker, and a lidar-enabled mapping/tracking sensor are presented in depth. An explanation of the software designed for computer simulation is included. It is proved through this analysis that, when implemented as part of a well-tuned extended Kalman Filter and in combination with other sensors, the proposed model for a lidar-enabled mapping/tracking sensor significantly reduces estimation error. This …

Solid Lubrication Bearing Design Through Analytical And Empirical Vibration Analysis Of Characteristic Frequencies, Christopher A. Schultz

Master's Theses (2009 -)

Ball bearings with solid lubrication lack the damping mechanisms of oil and produce well-defined vibration characteristics based upon given geometry and speed of operation. This work takes advantage of the high signal to noise ratio in x-ray bearings and develops an algorithm to statistically track bearing performance based upon fundamental bearing theory, Monte Carlo simulation, Order Analysis, and Weibull statistics. The technique gathers vibration data solely related to the theoretical operation of a bearing, negates the background noise, and provides descriptive vibration amplitude statistics of individual bearing components for evaluation. The practical implications of the thesis described herein allow the …

Hazard-Driven Drivers’ Behaviours Towards Vehicle-To-Median Safe Distances, Martha Leni Siregar

Makara Journal of Technology

A median is required for a two-way road to separate traffic from opposing lanes and to prevent head-on collisions. However, studies indicate that medians are also perceived as hazards which need to be avoided during driving. This hazard perception is manifested in drivers’ changing behavior towards various types of medians along the driving lanes inform of their tendency to allow various safe distances to the medians. The Indonesian Highway Capacity Manual (IHCM) does not differentiate between types of medians and the influence on the drivers’ choice of safe margin to the medians. Therefore, this study looks into how the existence …

Construction Of A Novel Method Of Measuring Thermal Conductivity For Nanostructures, Hiroya Ikeda, Shoma Yoshida, Yuhei Suzuki, Veerappan Manimuthu, Faiz Salleh, Fujio Kuwahara, Masaru Shimomura, Kenji Murakami

Makara Journal of Technology

With the aim of characterizing the thermal conduction in a nanometer-scaled materials, we have constructed a novel method on the basis of an ac calorimetric method. In this method, periodic sample heating is performed by light irradiation and the corresponding periodic temperature is detected by infrared irradiative thermometer. This makes us measure the thermal diffusivity out of contact with the objective sample. In the present study, we confirm to measure the thermal diffusivity of bulk Si and Cu by this non-contact method with halogen-lamp irradiation. In determining the thermal diffusivity from the relationship between distance deviation and delay time, the …

The Effects Of The Types Of Milk (Cow, Goat, Soya) And Enzymes (Rennet, Papain, Bromelain) Toward Cheddar Cheese Production, Ariestya Arlene, Anastasia Prima Kristijarti, Ivana Ardelia

Makara Journal of Technology

The objectives of this research are to study the effects of different types of milk and enzymes toward the yield and quality (moisture, ash, protein, fat content, and texture) of cheddar cheese and the interaction between those two variables during the process. The types of milk are cow, goat, and soya milk, while the types of enzymes are rennet, papain, and bromelain enzymes. Regarding the procedure, the milk is first pasteurized before CaCl2 and Lactobacillus lactis that acts as the acidifier starter as much as 0.2% (w/v) and 0.5% of the milk volume are added respectively. The amount of enzyme …

Energy And Exergy Analysis Of Kalina Cycle For The Utilization Of Waste Heat In Brine Water For Indonesian Geothermal Field, Nasruddin Nasruddin, Agus Noor Sidiq, Abdulmajeed Mohamad, Rama Usvika

Makara Journal of Technology

The utilization of waste heat in a power plant system—which would otherwise be released back to the environment—in order to produce additional power increases the efficiency of the system itself. The purpose of this study is to present an energy and exergy analysis of Kalina Cycle System (KCS) 11, which is proposed to be utilized to generate additional electric power from the waste heat contained in geothermal brine water available in the Lahendong Geothermal power plant site in North Sulawesi, Indonesia. A modeling application on energy and exergy system is used to study the design of thermal system which uses …

Validation Of Open Chain Model During Kinematic Analysis Of Joint Mobilization Of The Foot: An In Vitro Study, Anthony Ross Mcnally

Mechanical & Aerospace Engineering Theses & Dissertations

Joint mobilization techniques have been shown to improve dorsiflexion range of motion after ankle injury in multiple in vivo studies; however, the underlying arthrokinematic effects of this treatment still require clarification. Therefore, the purpose of this preliminary study was to determine the viability of an open kinetic chain in vitro model for applying Maitland Grade III anterior/posterior joint mobilizations to the talocrural joint while examining the osteokinematic and arthrokinematic changes at the talocrural, subtalar and hindfoot joints. Three fresh frozen cadaver lower legs had Maitland Grade III anterior-to-posterior joint mobilization applied to the talocrural joint in 2 sessions of 200 …

Detect And Avoid For Small Unmanned Aircraft Systems Using Ads-B, Timothy Mclain, Laith R. Sahawneh, Matthew O. Duffield, Randall W. Beard

Faculty Publications

With the increasing demand to integrate unmanned aircraft systems (UAS) into the National Airspace System (NAS), new procedures and technologies are necessary to ensure safe airspace operations and minimize the impact of UAS on current airspace users. Currently, small UAS face limitations on their use in civil airspace because they lack the ability to detect and avoid other aircraft. This article presents a framework that consists of an Automatic Dependent Surveillance-Broadcast (ADS-B)-based sensor, track estimator, conflict/collision detection, and resolution that mitigates collision risk. ADS-B offers long-range, omni-directional intruder detection with comparatively few size, weight, power, and cost demands. The proposed …

The Design For Manufacturing And Assembly Analysis And Redesign Of An Aircraft Refueling Door Hinge Utilizing Additive Manufacturing, Kurt A. Schwarz

Doctoral Dissertations and Master's Theses

In this thesis, an aircraft door hinge assembly provided by Gulfstream Aerospace was analyzed following an established process called DFMA. The hinge was then redesigned to be additively manufactured, which is uncommon currently in industry for load bearing components. It was shown that the Design for Manufacturing (DFM) guidelines were inadequate when applied to the new technology of additive manufacturing (AM). This was primarily due to AM's unique and unprecedented manufacturing capabilities.

A conservative redesign approach was followed due to a limitation in current AM material properties and time available for analysis. Despite this, a significant improvement in weight reduction …

Detecting Slow Wave Sleep Using A Single Eeg Signal Channel, Bo-Lin Su, Yuxi Luo, Chih-Yuan Hong, Mark L. Nagurka, Chen-Wen Yen

Mechanical Engineering Faculty Research and Publications

Background: In addition to the cost and complexity of processing multiple signal channels, manual sleep staging is also tedious, time consuming, and error-prone. The aim of this paper is to propose an automatic slow wave sleep (SWS) detection method that uses only one channel of the electroencephalography (EEG) signal.

New Method: The proposed approach distinguishes itself from previous automatic sleep staging methods by using three specially designed feature groups. The first feature group characterizes the waveform pattern of the EEG signal. The remaining two feature groups are developed to resolve the difficulties caused by interpersonal EEG signal differences.

Results and …