Mechanical Engineering Commons^™

Noise Control By Structure And Material, Brian Tarling

Thinking Matters Symposium Archive

An acoustic impedance testing tube is designed and constructed to test noise absorption properties of selected materials. The structure will be made to be convenient for demonstration purposes and real testing procedures while following ASTM E1050 standards as closely as possible. An engineering drawing as well as a 3D-­‐CAD model of the structure is developed. Testing is conducted on selected materials; mainly ones that will allow obtained results to be compared to results found by other parties. Various sounds will be generated using Mathematical programming; the types of sound will include single frequency, wide band and narrow band noises. Microphones …

Control Oriented Concentrating Solar Power (Csp) Plant Model And Its Applications, Qi Luo

Open Access Dissertations

Solar receivers in concentrating solar thermal power plants (CSP) undergo over 10,000 start-ups and shutdowns, and over 25,000 rapid rate of change in temperature on receivers due to cloud transients resulting in performance degradation and material fatigue in their expected lifetime of over 30 years. The research proposes to develop a three-level controller that uses multi-input-multi-output (MIMO) control technology to minimize the effect of these disturbances, improve plant performance, and extend plant life. The controller can be readily installed on any vendor supplied state-of-the-art control hardware.^ We propose a three-level controller architecture using multi-input-multi-output (MIMO) control for CSP plants that …

Bayesian Global Optimization Approach To The Oil Well Placement Problem With Quantified Uncertainties, Zengyi Dou

Open Access Theses

The oil well placement problem is vital part of secondary oil production. Since the calculation of the net present value (NPV) of an investment depends on the solution of expensive partial differential equations that require tremendous computational resources, traditional methods are doomed to fail. The problem becomes exceedingly more difficult when we take into account the uncertainties in the oil price as well as in the ground permeability. In this study, we formulate the oil well placement problem as a global optimization problem that depends on the output of a finite volume solver for the two-phase immiscible flow (water-oil). Then, …

Optimizing Electrode Thickness And Material For Laser-Induced Electrothermal Flow, Jian Wei Khor

Open Access Theses

In this article, the material dependence of electrothermal flow is studied to optimize an optoelectric particle manipulation technique called Rapid Electrokinetic Patterning (REP). REP utilizes a heat source to produce temperature gradients, which, in this study, are induced by the application of a 1064 nm cw laser. The simultaneous application of an uniform AC electric field assemble colloids on the surface of an electrode that can be moved by translating the laser. The temperature gradients produced from the heat source are crucial in REP as the higher the temperature gradient the faster the electrothermal flow. Thus, optimization of temperature gradients …

Smart V-Belt, Kyle J. Mosier

Open Access Theses

The purpose of this research was to develop a method for detecting premature failure in a v-belt using capacitance and resistance readings. Another goal of the research was to detect tension values on the belt using the same readings. Materials of current belts and possible materials for a prototype belt were tested. Materials were chosen, and prototype belts were built. Pulley system configurations were developed and built. Sections of the belt designs were tested for capacitance and resistance before and after various methods of damage. Capacitance was chosen as the better sensing method. Certain layered belt configurations and sheave configurations …

Delamination Of C/Pekk I-Beam Using Virtual Crack Closure Technique And Cohesive Zone Method, Greeshma Ramakrishna

Open Access Theses

A damage study is conducted on a carbon epoxy/PEKK (poly-ether-ketone-ketone) thermoplastic composite I-Beam, with a pre crack of 100 mm modeled between the top flange and the filler (butt joint between filler and web). This project is in collaboration with Fokker Aerostructures, Netherlands and is part of the Thermoplastic Primary Aircraft Structure innovation program (TAPAS). The C/PEKK I-Beam is modeled after a section of the Gulfstream G650 aircraft's centre beam, which was previously a carbon fiber/epoxy hat-stiffened skin construction. The objective of the thesis is to identify if the crack propagates in the I-Beam within the load range that act …

An Experimental Study On The Effects Of Blade Row Interactions On Aerodynamic Loss Mechanisms In A Multistage Compressor, Natalie Rochelle Smith

Open Access Dissertations

While the gas turbine engine has existed for nearly 80 years, much of the complex aerodynamics which governs compressor performance is still not well understood. The unsteady flow field consists of periodic blade row interactions from the wakes and potential fields of each blade and vane. Vane clocking is the relative circumferential indexing of adjacent vane rows with the same vane count, and it is one method to change blade row interactions. Though the potential of performance benefits with vane clocking is known, the driving flow physics have yet to be identified. ^ This research examines the effects of blade …

Investigating Solutions To Wind Washing Issues In Two-Story Florida Homes, Phase 2, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

With U.S. Department of Energy goals of reducing existing home energy use by 30% and new home energy use by 50%, it is imperative to focus on several energy efficiency measures, including the quality of air and thermal barriers. This report provides results from a second-phase research study of a phenomenon generally referred to as wind washing. Wind washing is the movement of unconditioned air around or through building thermal barriers in such a way as to diminish or nullify the intended thermal performance. This study focused on the impact of poorly sealed and insulated floor cavities adjacent to attic …

Creep And Shrinkage Behavior Of Fly Ash Based Geopolymer Concrete, Md Rashedul Islam

Doctoral Dissertations

The manuscript presented herein is based on the investigation of the short and long term properties of fly ash based geopolymer concrete (GPC) and their link to fly ash characteristics. Fly ash (FA) exhibits a significantly different particle morphology, which impacts the mechanical properties of the resulting GPC and typically contains impurities that fluctuate from one FA source to another. A key contribution of this research work is the capturing of the variability posed by the FA stockpile with a wide range of physical, chemical, and crystallographic characteristics as a source material to select the GPC mix design. In the …

Electrochemical Fatigue Crack Treatment, Konstantin Dolgan

Doctoral Dissertations

Fatigue is responsible for at least 50% of all mechanical and 90% of all metallic failures. Fatigue cracks often start at stress concentrations, and without timely and appropriate remediation, tend to exhibit relatively fast propagation that leads to property damage and sometimes serious accidents.

The objective of this research was to develop a new method of fatigue crack treatment in steel structures and estimate its efficiency and limitations. The method was based on placing fatigue cracks under compression by depositing nickel onto the surfaces of the cracks. The proposed method was applied to ASTM E399 compact-tension specimens machined from ASTM …

Modeling On Single-Sided Wind-Driven Natural Ventilation, Haojie Wang

Open Access Dissertations

Buildings use 40% of the total primary energy in the United States, with a significant part of this energy being used for ventilation and cooling. Despite the large amount of energy used in buildings, reports have shown that the indoor air quality (IAQ) and thermal comfort are not satisfactory. The lowered productivity due to the bad IAQ could cause $125 billion loss per year and the sick building syndromes could cause $32 billion direct healthcare costs. Most of the problems related to IAQ are caused by insufficient fresh outdoor air supply or lack of maintenance with traditional mechanical ventilation systems. …

Phonon-Drag Contribution To Seebeck Coefficient Of Ge-On-Insulator Substrate Fabricated By Wafer Bonding Process, Veerappan Manimuthu, Shoma Yoshida, Yuhei Suzuki, Faiz Salleh, Mukannan Arivanandhan, Yoshinari Kamakura, Yasuhiro Hayakawa, Hiroya Ikeda

Makara Journal of Technology

In order to build high-sensitivity infrared photodetectors using SiGe nanowires, we investigate the thermoelectric characteristics of Ge-on-insulator (GOI) layers as a reference for SiGe. We fabricate p-type GOI substrates with an impurity concentration of 1016-1018cm-3 by a wafer-bonding process using Ge and oxidized Si wafers. Annealing treatment is performed in order to further increase the bonding strength of Ge/SiO2 interface. We measure the Seebeck coefficient in the temperature range of 290-350 K. The Seebeck coefficient of the GOI layers is very close to the theoretical value for Ge, calculated on the basis of carrier transport. Hence, there is a small …

Parker Hannifin Chainless Challenge 2014-15 Senior Design Project, Matt Pallotta, Nathan Klammer, Kemper Whaley, Jack Rechtin

Mechanical Engineering

California Polytechnic State University has been invited to compete in the Parker Hannifin Chainless Challenge Competition in 2014-15. Cal Poly has chosen a team of mechanical engineering students to take part. We have named our team “Bike Under Pressure” and all references as such refer to the team.

The challenge is to build a bicycle which does not have a solid mechanical connection between the power input of the rider to the power output of the wheel(s). After conducting research into different previous designs and brainstorming designs of their own, Bike Under Pressure developed two conceptual designs. One design featured …

Characterization Of Wake Effects And Loading Status Of Wind Turbine Arrays Under Different Inflow Conditions, Xiangyu Gao

Open Access Theses

The objective of the present work is to improve the accuracy of Actuator Line Modeling (ALM) in predicting the unsteady aerodynamic loadings on turbine blades and turbine wake by assessing different methods used to determine the relative velocity between the rotating blades and wind. ALM is incorporated into a Large Eddy Simulation (LES) solver in OpenFOAM (Open Field Operations and Manipulations). The aerodynamic loadings are validated by experiment results from National Renewable Energy Laboratory (NREL). Turbine wakes are validated by predictions of large eddy simulation using exact 3D blade geometries from a two-blade NREL Phase VI turbine. Three different relative …

Drop Volume Modulation Via Modulated Contact Angle In Inkject Systems, Aaron Fulton

Open Access Theses

To date, there are limited options in the ability to adjust feature sizes when inkjet printing. The reduction of nozzle size has been the primary method by which smaller features are created. Prior attempts to reduce feature sizes have all come with some restriction or another, as they are only accessible on certain systems, are difficult to manufacture, tune, cause clogging, etc. Few attempts to create droplets of smaller radii than that of the nozzle from which they are produced have been successful. Additionally, many fluids cannot be jetted whatsoever. Existing methods pertain largely to piezoelectric inkjet printing and time …

Improving Product Design Phase For Engineer To Order (Eto) Product With Knowledge Base Engineering (Kbe), Hanhdung Thi Dinh

Open Access Theses

In industry currently Computer Aided Design (CAD) is an important tool for the modification, analysis, or optimization of the 3D virtual environment that replicates the physical product. CAD software is an efficient and reliable tool. However, as globalization increases customer demands, this process needs to be faster and more efficient to accommodate changing product design situations, especially for Engineer-to- Order (ETO) products. ^ The traditional method of product design process is to operate CAD software without argumentation. Design engineers create CAD prototypes and drawings based on available knowledge and information which comes from engineering experts, company standards, industrial practices as …

Characterization And Evaluation Of Head Impact Sensors And Varsity Football Helmets, Brian R. Cummiskey

Open Access Theses

An increased understanding of the effects of brain injury in recent years has led to greater attention being given to the topic. A desire to investigate the causal agents of these injuries in athletes has led to the development and use of several devices that track head impacts as well as improving helmet technology to protect players from said impacts. In order to determine which devices are able to best measure head impacts, a Hybrid III headform was used to quantify the accuracy for translational and angular accelerations. Testing was performed by means of administering impacts to a helmet on …

Modeling And Analysis Of A Resonant Nanosystem, Scott L. Calvert

Open Access Theses

The majority of investigations into nanoelectromechanical resonators focus on a single area of the resonator's function. This focus varies from the development of a model for a beam's vibration, to the modeling of electrostatic forces, to a qualitative explanation of experimentally-obtained currents. Despite these efforts, there remains a gap between these works, and the level of sophistication needed to truly design nanoresonant systems for efficient commercial use. Towards this end, a comprehensive system model for both a nanobeam resonator and its related experimental setup is proposed. Furthermore, a simulation arrangement is suggested as a method for facilitating the study of …

Numerical Characterization Of Convective Heat Transfer Of Low-Rise Buildings, Ranchi Chen

Open Access Theses

The convective heat transfer coefficient (CHTC) is an important parameter to evaluate the efficiency of building-integrated photovoltaic/Thermal (PV/T) system and the energy exchange within the turbulent atmospheric boundary layer. Reynolds-average Navier-Stokes approach has been frequently used to predict the CHTC at the surface of low rise roof but incapable of predicting transient behavior of separation, reattachment and recirculation both on the windward and leeward surface. However, Large Eddy Simulation approach (LES) could provide accurate flow field and temperature field around the low rise building. ^ The current study uses Large Eddy Simulation with Smagorinsky-Lily model and the Shear Stress Transport …

Asymptotic Modelling Of A Thermopiezoelastic Anisotropic Smart Plate, Yufei Long

Open Access Theses

Motivated by the requirement of modelling for space flexible reflectors as well as other applications of plate structures in engineering, a general anisotropic laminated thin plate model and a monoclinic Reissner-Mindlin plate model with thermal deformation, two-way coupled piezoelectric effect and pyroelectric effect is constructed using the variational asymptotic method, without any ad hoc assumptions. Total potential energy contains strain energy, electric potential energy and energy caused by temperature change. Three-dimensional strain field is built based on the concept of warping function and decomposition of the rotation tensor. The feature of small thickness and large in-plane dimension of plate structure …

Numerical Simulation And Characterization Of Jet Flows In Indoor Environments, Zhu Shi

Open Access Theses

Jet flows are prevalent in indoor environment and other engineering applications. Typical examples in indoor environment include the flow discharged from personal ventilation systems, and the jet exhaled through breathing or coughing. When there is density (or temperature) difference between the jet and surroundings, jet flow becomes stratified jet. Due to its complication, stratified jet flow is difficult to model, especially in the developing or transitional region of the flow. Studying stratified jet flows is of great significance for understanding the mixing dynamics of jet and ambient environment. This is particularly important for optimizing indoor environment design, or obtaining accurate …

Machining As A Mechanical Property Test Revisited, David L. Smith

Open Access Theses

There is much need for data on mechanical behavior of metals at high strains and strain rates. This need is dictated by modeling of processes like forming and machining, wherein the material in the deformation zone is subjected to severe deformation conditions atypical of conventional material property tests such as tension and torsion. Accurate flow stress data is an essential input for robust prediction of process outputs. Similar requirements arise from applications in high speed ballistic penetration and design of materials for armor. Since the deformation zone in cutting of metals is characterized by unique and extreme combinations of strain, …

Design And Heat Transfer Analysis Of Accelerating Distributed Combustion System, Yashovardhan U. Wagh

Open Access Theses

Over the past few decades, there has been a significant increase in greenhouse gases such as CO₂, N₂O, and CH₄ produced from gas turbine engines. Keeping this in mind, current research work is being carried out for reducing NOx produced from combustors. The objective of this research is to determine the feasibility of Distributed Combustion Systems (DCS) for increasing efficiency and reducing NOx emissions. ^ A DCS has a main combustion zone (MCZ) where 90% of the fuel is burned and is followed by a secondary combustion zone (SCZ) in which jets carrying fuel are …

An Experimental Investigation Of A Premixed Laminar Flame Using Tunable Diode Laser And Quantitative Imaging Of Radiation Intensity, Weichao Wang

Open Access Theses

Simultaneous CO concentration and temperature measurements using Tunable Diode Laser Absorption Spectroscopy (TDLAS) are reported in this study. Ro-vibrational transitions of CO, R(27) and R(6) are used for probing absorbance profiles. Premixed ethylene-air flat flame on a McKenna burner is used for creating combustion gaseous products at equivalence ratio 0.83 to 1.82. Nitrogen shroud flow is used for preventing air mixing. Both Direction Absorption (DA) and Wavelength Modulation Spectroscopy (WMS) experiments are conducted. Experimental results are compared with literature and simulation using CHEMKIN and chemical equilibrium. Reasonable agreements are achieved between experiment and simulation. The CO detection limit is determined …

Real-Time Rss-Based Indoor Navigation For Autonomous Uav Flight, Sangjun Lee

Open Access Theses

Navigation for the autonomous flight of Unmanned Aerial Vehicles (UAVs) in an indoor space has attracted much attention recently. One of the main goals of an indoor navigation system is developing an alternative method to obtain position information that can replace or complement the global positioning system. While much research has focused on vision-based indoor navigation systems, this paper aims to develop a Received Signal Strength (RSS)-based navigation system, which is a more cost effective alternative. Then, the position and attitude of a UAV can be computed by the fusion of RSS measurements and measurements from the onboard inertial measurement …

Computational Valve Plate Design, Paul K. Kalbfleisch

Open Access Theses

Axial piston machines are widely used in many industries for their designs compactness, flexibility in power transfer, variable flow rate, and high efficiencies as compared to their manufacturing costs. One important component of all axial piston machines that is a very influential on the performance of the unit is the valve plate. The aim of this research is to develop a design methodology that is general enough to design all types of valve plates and the simple enough not to require advanced technical knowledge from the user. A new style of valve plate designs has been developed that comprehensively considers …

Understanding Mechanical Environment Changes And Biological Responses To Canine Retraction Using T-Loop, Feifei Jiang

Open Access Dissertations

Jiang, Feifei. Ph.D., Purdue University, May 2015. Understanding Mechanical Environment Changes and Biological Responses to Canine Retraction Using T-loop. Major Professors: Jie Chen, School of Engineering and Technology, Anil Bajaj, School of Mechanical Engineering. Predictability of tooth displacement in response to specific orthodontic load system directly links to the quality and effectiveness of the treatment. The key questions are how the tooth's environment changes in response to the orthodontic load and how the biological tissues respond clinically. The objectives of this study are to determine the mechanical environment (ME) changes and to quantify the biological tissues' response. Eighteen (18) patients …

Fully Electronic Method Of Measuring Post-Release Gap And Gradient/Residual Stress Of A Mems Cantilever, Andrew Stephen Kovacs

Open Access Dissertations

Smartphones and other wireless devices have become ubiquitous over the past decade, and the RF front-end inside of them has become more complex and disproportionately consumes more power compared to other components. Micro-electromechanical systems (MEMS) have a huge potential to reduce these problems while simultaneously offering superior performance compared to current leading-edge technology. However, MEMS technology has difficulty transitioning from the lab to large-scale manufacturing due to the unpredictability of device lifetime and manufacturability issues. This can be mitigated by investigating how critical material or physical parameters (gap, stress, Young's modulus, material thickness, etc.) vary from manufacturing uncertainties and how …

Large Scale Modeling, Model Reduction And Control Design For A Real-Time Mechatronic System, Qiong Li

Open Access Dissertations

Mechatronics is the synergistic integration of the techniques from mechanical engineering, electrical engineering and information technology, which influences each other mutually. As a multidisciplinary domain, mechatronics is more than mechanical or electronics, and the mechatronic systems are always composed of a number of subsystems with various controllers. From this point of view, a lot of such systems can be defined as large scale system. The key element of such systems is integration. Modeling of mechatronic system is a very important step in developing control design of such products, so as to simulate and analyze their dynamic responses for control design, …

Freezing-Induced Deformation Of Biomaterials In Cryomedicine, Altug Ozcelikkale

Open Access Dissertations

Cryomedicine utilizes low temperature treatments of biological proteins, cells and tissues for cryopreservation, materials processing and cryotherapy. Lack of proper understanding of cryodamage that occurs during these applications remains to be the primary bottleneck for development of successful tissue cryopreservation and cryosurgery procedures. An engineering approach based on a view of biological systems as functional biomaterials can help identify, predict and control the primary cryodamage mechanisms by developing an understanding of underlying freezing-induced biophysical processes. In particular, freezing constitutes the main structural/mechanical origin of cryodamage and results in significant deformation of biomaterials at multiple length scales. Understanding of these freezing-induced …